SQL Server has stopped a critical task, with the following error log. I have executed the task again and the same symptons occur.
--
EXCEPTION_ACCESS_VIOLATION raised, attempting to create sympton dump
***BEGIN STACK TRACE***
0x0040DC1A in SQLSERVR.EXE, ubfree() + 0x009A
...
...
--
Has anyone any had a simliar experience or have any suggestions for investigation?
Cheers
Jasper
I have the error above, but no error log. I can preview the sub report - but this main report fails after working this morning. This is for internal company reports and I rebuilt this one after converting from access.
I have looked where the error logs should be, but there are no error logs.
I rebuilt the query as I needed to change this, but this did not help.
Is there someone who could point me in the correct direction.
Thanks!
Terry
I am running an environment as below
ADO 2.7
SQL Sever OLE DB Provider
VB 6
SQL Server 6.5 SP 5 A Update
If I run a stored procedure that contains a Print statement or gives a warning. Then any error that occurs after that is ignored. No error state is raised in VB and the Errors collection only contains the print or warning.
Can anyone tell me why?
Thanks
Chris
I'm setting up a routine to do some reindexing. To get the info I need I'm trying to use the new function. The DB I think is causing the problem does pass DBCC CHECKDB. I'm not sure why I'm getting this but can not find anyone else that is getting this same error.
When I run this....
SELECT *
FROM sys.dm_db_index_physical_stats (NULL, NULL, NULL, NULL, 'detailed')
I get this....
Location: qxcntxt.cpp:954
Expression: !"No exceptions should be raised by this code"
SPID: 236
Process ID: 1060
Msg 0, Level 11, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.
Msg 0, Level 20, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.
If I run only for the DB I think is causing the problem I get this...
Msg 0, Level 11, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.
Msg 0, Level 20, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.
I am new to T-SQL programming. I need to write a main procedures to execute multiple transactions. How could I structure the program so that each transaction will not abort if failed. Instead, the next transaction will keep running. At the very end the procedure will output the error and report them back to the main program in the output parameters. Looking for pseudo code.
View 6 Replies View RelatedOLEDB transaction is making difference in my migrated application powerbuilder 10.5 which has new oledb driver which is replaced by MSS driver in previous Powerbuilder version.
1.)I am facing the below error on update/save this was not faced during my previous versino drive MSS in powerbuilder.This is oocure only after the change to oledb driver.
"Row change between retrieve and update.".
in front end of my application the error is poped as
"(STD1007) This row has been modified by another user. Save is canceled! ".
Please help to resolve this error.
I'm trying to get to grips with the formview control and have a problem regarding where an exception is raised if SQL server raises an error when an insert is taking place. I am new to both asp.net & c#
I have put the following code in the SqlDataSource2_Inserted & Formview1_Inserted events as a way of determining where the exception is raised:
if (e.ExceptionHandled){ string exceptionmessage = e.Exception.Message; lblStatus.Text = exceptionmessage;}
These two events are the only one's that have the ExceptionHandled and Exception properties.
I run the code with data that will raise a duplicate key error from SQL Server but the error is not being caught by either of these two handlers. All I get is a page that starts with
Server Error in '/SourceCode' Application.
Violation of UNIQUE KEY constraint 'IX_reftblAntigens'. Cannot insert duplicate key in object 'reftblAntigens'.The statement has been terminated.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Violation of UNIQUE KEY constraint 'IX_reftblAntigens'. Cannot insert duplicate key in object 'reftblAntigens'.The statement has been terminated....
Is there somewhere else I should be looking to handle this sort of thing? I thought using the databound controls would make life easier but I'm actually finding it more of a pain than coding everything myself.
I am sync. for the first time (Merge Replication using SQL 2005 and Mobile) and this error keeps poping up on the emulator. I am tring out the tutorial. :) boss on my butt.
Does anyone have any ideas or a solution to this...your help is WELL APPRECIATED ...
Error code: -2147024809
zo
I have a looped query querying linked servers. When it cannot connect to a server, it errors out.
Error Message;
Server: Msg 6, Level 16, State 1, Line 2
Specified SQL server not found.
How can I handle this error message and continue the query?
Hiwhen i right click table and click design table then error occured(an unexpected error occured during this operation)If any one knows please let let me know your help would be appreciated .thankspardhi--Message posted via http://www.sqlmonster.com
View 1 Replies View RelatedI am getting the following error.A transport-level error has occurred when sending the request to theserver. (provider: Shared Memory Provider, error: 0 - The system cannotopen the file.)On performing the same operation again, it happens fine without anyerror.Please help.Regards,Shilpa
View 5 Replies View RelatedWe just starting receiving an error when we try to print our reports. "An error occured during printing. (0x800C0005)".
These same reports work fine on my localhost, our build server, and our beta server. This is only happening on our production server.
I have removed the activeX control and reinstalled it. It did not work.
We are ONLY running SSRS 2005. We never ran a BETA version. It was working up until recently.
Please HELP!
Thanks.
Hi,
I have installed SQL 2000 reporting services 2000 SP2.
When i try to print report by clicking print button in HTML tool bar i get error as "Error occured while printing 0x80040005"
I have turned on client print log, but there in no useful information
Regards
Shakeela
we r using the report viewer control of the reporting service 2000 , and it works fine
but when there is a huge report (around 1000 page) it gives the above error "An Error Occured During Printing (0X80070003)" after spoling of around half of the report around 500 page, and stops spoling the rest of the report
is it a problem with the reporting service or the server hardware ?
Hi All,
I am new to sql server 2005.
I tried to connect to reporting services configuration manager.
it gives an error
An Unknown error has occured in WMI provider.
error code 80040219.
so please help me out regarding this issue.
Hello everyone,
I have a package that should accomplish the following task:
- Loop on all files in a given directory.
- Before proccessing the current file in the Enumerator, it should be moved to a folder called "importing"
- Load the content of the file into a destination DB.
- After a successfull load, the file is moved from the "importing" to the "success" folder.
- If anything went wrong during the load process, the file should be moved from the "importing" to the "error" folder and an e-mail should be sent out to a certain admin account.
What I have done so far:
My control flow looks like this:
Foreach Loop containing the following tasks:
- File System Task: moving the current file from its original path to the "importing" folder
- Data Flow Task1: performing some transformations and insertions into the DB and raw files.
- Data Flow Task2: performing some transformations and insertions into the DB and raw files.
- Data Flow Task3: performing some transformations and final insertions into the DB.
- File System Task: moving the current file from the "importing" to the "success" folder
Question:
I do not know how to catch the event that one of my three Data Flow Tasks has failed and in this case perform two simple tasks, namely...
- File System Task: moving the current file from the "importing" to the "error" folder
- Send Mail Task: sending a configured e-mail message to a ceratin administrator.
Thanks in advance...
Regards,
Samar
Hi all,
Our production server had a raid failure, which we fixed overnight.
This is where the problem started, at least i think.
Now all of a sudden(after the server was restarted) i am getting following error, when one of the stored procedure gets executed
(I have more then 200 Stored Procedure and they are all working fine)
It does not throw error everytime it gets executed, but randomly it will fail.
"SqlDumpExceptionHandler: Process 233 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process"
This error also creats a dump file in MSSQLLog and logs into SQL Error Log.
I also did DBCC CHECKDB suggested by many people on Internet and everything seems fine, in terms of data corruption.
CHECKDB found 0 allocation errors and 0 consistency errors in database 'XXXX'.
I even tried dropping and recreating the stored procedure, but same result and no luck.
My question is why all of a sudden or server re-start would trigger this errors?
By the way I am using VB.Net 2003 and SQL Server 2000. My only fear is that our SQL server does not have latest service pack.
Any ideas or suggestion will be highly appreciated.
Mits
I am new learner of ASP.NET and SQL server.So there might be any mistake in writing code.
When I tried to run my project I got following error.I am uisng SQL 2005 server.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
connection string used is
<add name ="ConnectionString" connectionString="Data Source=BLUESTAR\SQLEXPRESS;Initial Catalog=KnowledgeAssetManagement;Integrated Security=True"/>
I have also tried by setting local & remote connection options from the SQL server surface Area Configuration and connections option from server properties of sql server management studio.
Please help me ,my work get stucked due this problem.
Hi folks,
I have been trying to figure out how to establish a remote connection to a database on SQL Server 2005, but no matter the approach, I'm met with this result: "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. error:26 - Could not open a connection to SQL Server."
The machine I have the server on is a OS Vista Ultimate, 2 gigs ram, 2.86 GHz processor.
I'm trying to access from another 2 types of machines - both laptops with Vista Ultimate.
I have run the configuration tool on the server machine to allow local and remote connections for the database engine, as well for the browser, but to no avail.
I have the developer version of SQL 2005 installed on all three machines, but don't know if that is a reason for not being able to establish a connection.
I've tried to connect via a test application; also via Visual Studio, and also directly from SQL Server on the machines.
None of the machines can access the database any of the others, regardless of the configuration.
They all display the very same error.
I'm really in need of some help with this, any ideas?
Thanks!
Gary
I get this error when I try to access one of my tables.
Msg 605, Level 21, State 1
Attempt to fetch logical page 4377 in database 'maillist' belongs to object '1340531809', not to object 'client'.
I know that when my database is restarted it will be marked suspect because of this error.
Does anybody know:
What causes this error?
Why I keep on getting it?
How do you fix it?
Is anybody even reading this?
Greetings,
I am having a big issue now. I made what I thought would be a simple change to our reporting services application, which has been running smoothly for about 2 years. The change has caused my "forms authentication" to start throwing an error that I rember from a while back while testing. Our rporting server is down, sad to say. Has anyone had this problem.
The error : Client found response content type of 'text/html; charset=utf-8', but expected 'text/xml'.
The request failed with the error message:...
Changes made
1. Stoped RS web app in IIS
2. Changed the ASP.NET Config Settings(Report Server App)
a. Authentication Tab - cookie time out (changed to 60)
b. State Manegement Tab - Session Time Out (changed to 60)
3. Changed the ASP.NET Config Settings(Our aps.net app that displays the reports)
a. Authentication Tab - cookie time out (changed to 60)
b. State Manegement Tab - Session Time Out (changed to 60)
4. Changed the SessionState Timeout property in the web config file in our web app that displays the reports.
5. Restarted the Report Server app.
6. Recycled the app pools
Could not log in!
I am catching the above error in my web app's ReportExecution.LogonUser().
I rebooted the server and continue to get sqldump logs and this exception. This error occured when I was testing the redirect a while back but that issue was resolved. The only changes I have made are above.....
Folks:
I am getting the following stack error in my SQL Server logs. I understand that there is a Microsoft Hotfix available for this and would like to know where will I find the HOTFIX for this because I didn't find it on Microsoft Website. We are currently on SQL 2000 SP 4 (Windows Server 2003 SP1).
Thanks !
*****************************************************************************
Computer type is AT/AT COMPATIBLE.
Bios Version is IBM - 1000
Current time is 09:02:25 11/16/07.
4 Intel x86 level 6, 2992 Mhz processor(s).
Windows NT 5.2 Build 3790 CSD Service Pack 1.
Memory
MemoryLoad = 56%
Total Physical = 4095 MB
Available Physical = 1800 MB
Total Page File = 8026 MB
Available Page File = 6052 MB
Total Virtual = 2047 MB
Available Virtual = 203 MB
*Stack Dump being sent to e:mssql2000dataMSSQLlogSQLDump0014.txt
* *****************************************************************************
**
*
* BEGIN STACK DUMP:
* 11/16/07 09:02:25 spid 59
*
* Exception Address = 009BF883 (CDStream:rintDumpHeader + 000007A7 Line 0+0
0000000)
* Exception Code = c0000005 EXCEPTION_ACCESS_VIOLATION
* Access Violation occurred reading address FFFF0002
* Input Buffer 92 bytes -
* exec dbo.QS_SoSSE15_ConnectionDetails @spid=67
*
*
* MODULE BASE END SIZE
* sqlservr 00400000 00CBAFFF 008bb000
* ntdll 7C800000 7C8BFFFF 000c0000
* kernel32 77E40000 77F41FFF 00102000
* ADVAPI32 77F50000 77FEBFFF 0009c000
* RPCRT4 77C50000 77CEEFFF 0009f000
* MSVCP71 7C3A0000 7C41AFFF 0007b000
* MSVCR71 7C340000 7C395FFF 00056000
* opends60 41060000 41065FFF 00006000
* SHELL32 7C8D0000 7D0D3FFF 00804000
* msvcrt 77BA0000 77BF9FFF 0005a000
* GDI32 77C00000 77C48FFF 00049000
* USER32 77380000 77411FFF 00092000
* SHLWAPI 77DA0000 77DF1FFF 00052000
* sqlsort 42AE0000 42B6FFFF 00090000
* ums 41070000 4107DFFF 0000e000
*****************************************************************************
plz help me...
when establishing a connection to the server. when connecting to server 2005, this failure may be caused by the fact that under the default setting SQL Server does not allow remote connections.(provider: Named pipes provider, error:40 - could not open a connection to sqlserver)
Hi all,
I am getting error message 'An internal consistency error occured sqlstate:42000" when i am trying to restore the database.
Regards,
Shashi.
hi,
I have enabled custom authorization in SQL server 2005 reporting services. If i try to view the reports thru report manager by using the url http://localhost/reports then i'm getting the error message as
"An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help
Get Online Help
The event log file is full"
If i try to view the reports by using reportserver url http://localhost/reportserver then its working fine. Please help me in resolving this issue.
The log file is as follows
<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.1399.00</Product>
<Locale>en-US</Locale>
<TimeZone>India Standard Time</TimeZone>
<Path>C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFilesReportServer__02_06_2007_13_59_07.log</Path>
<SystemName>BLRKEC21139D</SystemName>
<OSName>Microsoft Windows NT 5.1.2600 Service Pack 2</OSName>
<OSVersion>5.1.2600.131072</OSVersion>
</Header>
aspnet_wp!webserver!1!2/6/2007-13:59:07:: i INFO: Reporting Web Server started
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing ConnectionType to '0' as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.
aspnet_wp!configmanager!1!2/6/2007-13:59:08:: w WARN: WebServiceAccount is not specified in the config file. Using default: BLRKEC21139DASPNET
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
aspnet_wp!library!1!2/6/2007-13:59:08:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.
aspnet_wp!resourceutilities!1!2/6/2007-13:59:08:: i INFO: Reporting Services starting SKU: Developer
aspnet_wp!resourceutilities!1!2/6/2007-13:59:08:: i INFO: Evaluation copy: 0 days left
aspnet_wp!runningjobs!1!2/6/2007-13:59:08:: i INFO: Database Cleanup (Web Service) timer enabled: Next Event: 600 seconds. Cycle: 600 seconds
aspnet_wp!runningjobs!1!2/6/2007-13:59:08:: i INFO: Running Requests Scavenger timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
aspnet_wp!runningjobs!1!2/6/2007-13:59:08:: i INFO: Running Requests DB timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
aspnet_wp!runningjobs!1!2/6/2007-13:59:08:: i INFO: Memory stats update timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
aspnet_wp!library!1!02/06/2007-13:59:08:: i INFO: Catalog SQL Server Edition = Developer
aspnet_wp!webserver!1!02/06/2007-13:59:09:: i INFO: Processed folder '/'
aspnet_wp!library!6!02/06/2007-14:00:02:: i INFO: Call to GetPermissions:/
aspnet_wp!library!6!02/06/2007-14:00:03:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. ---> System.ComponentModel.Win32Exception: The event log file is full
at System.Diagnostics.EventLog.InternalWriteEvent(UInt32 eventID, UInt16 category, EventLogEntryType type, String[] strings, Byte[] rawData, String currentMachineName)
at System.Diagnostics.EventLog.WriteEntry(String message, EventLogEntryType type, Int32 eventID, Int16 category, Byte[] rawData)
at System.Diagnostics.EventLog.WriteEntry(String source, String message, EventLogEntryType type, Int32 eventID, Int16 category, Byte[] rawData)
at System.Diagnostics.EventLog.WriteEntry(String source, String message, EventLogEntryType type)
at Microsoft.ApplicationBlocks.ExceptionManagement.DefaultPublisher.WriteToLog(String entry, EventLogEntryType type)
at Microsoft.ApplicationBlocks.ExceptionManagement.DefaultPublisher.Publish(Exception exception, NameValueCollection additionalInfo, NameValueCollection configSettings)
at Microsoft.ApplicationBlocks.ExceptionManagement.ExceptionManager.PublishInternalException(Exception exception, NameValueCollection additionalInfo)
at Microsoft.ApplicationBlocks.ExceptionManagement.ExceptionManager.Publish(Exception exception, NameValueCollection additionalInfo)
at Microsoft.ApplicationBlocks.ExceptionManagement.ExceptionManager.Publish(Exception exception)
at Infosys.ReportingServices.CustomAuthorization.Authorization.DeserializeAcl(Byte[] secDesc)
at Infosys.ReportingServices.CustomAuthorization.Authorization.GetPermissions(String userName, IntPtr userToken, SecurityItemType itemType, Byte[] secDesc)
at Microsoft.ReportingServices.Library.Security.GetCatalogItemPermissions(ItemType catItemType, Byte[] secDesc)
at Microsoft.ReportingServices.Library.GetPermissionsAction.GetPermissions(String item, StringCollection& Operations)
--- End of inner exception stack trace ---
aspnet_wp!library!6!02/06/2007-14:00:12:: i INFO: Exception dumped to: C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFiles flags= ReferencedMemory, AllThreads, SendToWatson
aspnet_wp!library!1!02/06/2007-14:03:53:: i INFO: Call to GetPermissions:/
aspnet_wp!library!1!02/06/2007-14:03:53:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. ---> System.ComponentModel.Win32Exception: The event log file is full
at System.Diagnostics.EventLog.InternalWriteEvent(UInt32 eventID, UInt16 category, EventLogEntryType type, String[] strings, Byte[] rawData, String currentMachineName)
at System.Diagnostics.EventLog.WriteEntry(String message, EventLogEntryType type, Int32 eventID, Int16 category, Byte[] rawData)
at System.Diagnostics.EventLog.WriteEntry(String source, String message, EventLogEntryType type, Int32 eventID, Int16 category, Byte[] rawData)
at System.Diagnostics.EventLog.WriteEntry(String source, String message, EventLogEntryType type)
at Microsoft.ApplicationBlocks.ExceptionManagement.DefaultPublisher.WriteToLog(String entry, EventLogEntryType type)
at Microsoft.ApplicationBlocks.ExceptionManagement.DefaultPublisher.Publish(Exception exception, NameValueCollection additionalInfo, NameValueCollection configSettings)
at Microsoft.ApplicationBlocks.ExceptionManagement.ExceptionManager.PublishInternalException(Exception exception, NameValueCollection additionalInfo)
at Microsoft.ApplicationBlocks.ExceptionManagement.ExceptionManager.Publish(Exception exception, NameValueCollection additionalInfo)
at Microsoft.ApplicationBlocks.ExceptionManagement.ExceptionManager.Publish(Exception exception)
at Infosys.ReportingServices.CustomAuthorization.Authorization.DeserializeAcl(Byte[] secDesc)
at Infosys.ReportingServices.CustomAuthorization.Authorization.GetPermissions(String userName, IntPtr userToken, SecurityItemType itemType, Byte[] secDesc)
at Microsoft.ReportingServices.Library.Security.GetCatalogItemPermissions(ItemType catItemType, Byte[] secDesc)
at Microsoft.ReportingServices.Library.GetPermissionsAction.GetPermissions(String item, StringCollection& Operations)
--- End of inner exception stack trace ---
This is the SQLDumper file
02/05/07 16:10:37, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Input parameters: 4 supplied
02/05/07 16:10:37, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ProcessID = 3308
02/05/07 16:10:37, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ThreadId = 0
02/05/07 16:10:37, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Flags = 0x0
02/05/07 16:10:37, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, MiniDumpFlags = 0x0
02/05/07 16:10:37, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, SqlInfoPtr = 0x063C5860
02/05/07 16:10:37, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, DumpDir = <NULL>
02/05/07 16:10:37, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ExceptionRecordPtr = 0x00000000
02/05/07 16:10:37, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ContextPtr = 0x00000000
02/05/07 16:10:37, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ExtraFile = <NULL>
02/05/07 16:10:37, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, InstanceName = <NULL>
02/05/07 16:10:37, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ServiceName = <NULL>
02/05/07 16:10:37, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 11 not used
02/05/07 16:10:45, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 7 not used
02/05/07 16:10:45, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, MiniDump completed: C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFilesSQLDmpr0001.mdmp
Regards
Uday.
Hi all,
Our application that uses Reporting Services for it's Reports.
On one customers build it appears to keep falling over.
Restarting the server seems to resolve the problem for a short period
and then it happens again.
The exception that is returned to our application is
"An unexpected error occured in report processing. (rsInternalError)"
The customer has sent me the log files from
C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataReporting ServicesLogs
I've tied the time that the issue occurs to this section
w3wp!chunks!1!04/11/2008-10:27:35:: e ERROR: GetChunkPointerAndLength: System.Data.SqlClient.SqlException: Database 'ReportServerTempDB' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details.
and
w3wp!processing!1!04/11/2008-10:27:35:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: An unexpected error occurred in Report Processing., ;
Info: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: An unexpected error occurred in Report Processing. ---> System.Data.SqlClient.SqlException: Database 'ReportServerTempDB' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details.
I doubt that the disk is full as our database is sitting on the same drive and presumably the whole system would have stopped working by now.
Any thoughts as to what the problem might be?
We've not seen this before.
Cheers,
Chris
I have a stored procedure that I use for call a aspx page from within SQL. The stored procedure itself runs finewith no errors but I keep getting errors in the event viewer everytimeit runs (with .vbs, .NET, .vb6 client) outside Enterprise manager or SQL Query Analyzer.....This is error:Error: 0, Severity: 19, State: 0SqlDumpExceptionHandler: Process 52 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process.I think that this is the same problem seen inhttp://www.sqlmonster.com/Uwe/Forum...in-Event-ViewerI've test with XP sp2, W2003 server, SQL 2000 sp3a......on the same machine.ANY SUGGESTIONS??????Thanks--Message posted via http://www.sqlmonster.com
View 3 Replies View RelatedHi Friends,
We developed an application in the ASP.Net with C#.
We are going to do a task in the transaction.
It is working perfectly. But if two users comes simultaneously, then
It gives an exception that Transaction is already commited.
First transaction Commited Successfully.
When Second transaction goes to Commit()
Then it generate this error.
We are unable to find this problem Whether this is problom from SQL Server or DOTNET.
Pls give ur suggestions.
Thanks and waiting a helpful response.
Sachin
Please any one can help me ?I have multiuser application ( VB 6.0 ) on SQL Server 2000 running.
Last night my Sql Server was writting info on the Log file of one database when the power accidentally shut down. In fact, the server was executing one Microsoft Data Transformation Service ( DTS ) which transfers data from one table to another.
This morning when the users tried to work with this database everything went wrong... I've not been able to attach MDF AND LDF files to SQL Server 2000 Desktop Engine.
Looking for what happened I found those Info/Error LOG events:
A)Starting up database 'pcserveis'.
B)ex_raise2: Exception raised, major=34, minor=48, severity=21, attempting to create symptom dump
C) "The transaction ( Process Id 5 ) was left in "interblockade" in Lock
resources with another process and was chosen as subject of the "interblockade". Execute the transaction again." ( Sorry about wrong words , i'm using a translation tool from spanish )
D) Could not undo log record (5019077:221:133), for transaction ID (0:15254626), on page (1:1917), database 'pcserveis' (database ID 11). Page information: LSN = (5019072:426:5), type = 1. Log information: OpCode = 2, context 1.. ( Error: 3448, Severity: 21, State: 1)
E)Error while undoing logged operation in database 'pcserveis'. Error at log record ID (5019077:221:133).. (Error: 9004, Severity: 23, State: 7)
F)An error occurred while processing the log for database 'pcserveis'..
What can i do to restore my database? Thanks
Hi,I have an application that causes a dead lock at random. The issue I amhaving is, when the deadlock occurs, my applications is not recievingany errors from the DB. ie, during the deadlock SQLServer is returningan empty recordset and user is seeing a blank screen. The app logicdoes not go into the Try Catch statment in the C# code. I can'tunderstand why my app is not receiveing 1205 error from SQL server whendead lock occurs.Any ides why this is happening?Thanks_GJK
View 3 Replies View Relatedhi i am running a stored procedure and i want to trap the error of that stored procedure and pass it on the user in the asp.net prog.
my stored procedure are running thru a class library using C#. i tried various options of creating a new sql connnection with out using the classlibrary, but i dont get any errors. the code s
used is as follows Dim conn As New SqlConnection(System.Configuration.ConfigurationManager.AppSettings("dbconnection1"))
Dim cmd As New SqlCommand("usp_ImportPlanDetails", conn)
cmd.CommandType = CommandType.StoredProcedure'cmd.Parameters.AddWithValue("@ClientId", Session("ClientId"))
AddHandler conn.InfoMessage, New SqlInfoMessageEventHandler(AddressOf MessageEventHandler)
conn.Close()
Private Sub MessageEventHandler(ByVal sender As System.Object, ByVal e As SqlInfoMessageEventArgs)
Dim strMessage As String
For Each sqle As SqlError In e.Errors
strMessage = "Message:" + sqle.Message + "Number:" + sqle.Number + "Procedure:" + sqle.Procedure + "Server:" + sqle.Server + "Source:" + sqle.Source + "State:" + sqle.State + "Line Number:" + sqle.LineNumber
' strMessage = String.Format("Message: {1}, Number: {2}, Procedure: {3}, Server: {4}, Source: {5}, State: {6}, Line Number: {7}" , new Object[]{sqle.Message, sqle.Number, sqle.Server, sqle.Source, sqle.State, sqle.LineNumber})
'Console.WriteLine(strMessage)
lblErrorMsg.Visible = True
lblErrorMsg.Text = strMessage
and also tried doing this oImportPlan = New ImportPlan(System.Configuration.ConfigurationManager.AppSettings(APPSETTINGS_CONNECTION))
With oImportPlan
Try
.ClientID = Session("ClientId")
' .FileName = strFilePath1
.save()
Catch sqlex1 As SqlException
LogException(sqlex1)
End Try
End With
Catch sqlex As SqlException
LogException(sqlex)
End Try
Catch ex As Exception
lblErrorMsg.Text = "Error: Import Failed" + ex.Message
lblErrorMsg.Visible = True
End Try but have no luck in displaying the errors, My stored procedure has raiseerrors, Please help me out
I have an activated SP that is issuing PRINT statements.
These are raised as ErrorLog and EventLog events when using SQLProfiler
However if you attach an event notification for ERRORLOG and EVENTLOG, nothing appears in the queue. Any other ERRORLOG or EVENTLOG event caught by profiler is caught by the event notification as expected.
The environment:
Machine1: IBM Records Manager 4.11(IRM) on top of WebSphere Applicaton Server 5.1.0 running on Windows Server 2003. Sql Server 2000 Client and SQL JDBC Driver with SP3 has been installed.
Machine2: SQL Server 2000 Developer Edition with SP3 is installed - Windows XP. IRM uses this remoteSQL Server database
I could login and do certain task through the web client of IBM Records Manager(IRM). But when I try perform create/edit/delete kind of operations, I get the following error at WebSphere end:
9/13/06 11:39:16:742 IST] 6c9f4838 WSRdbXaResour E DSRA0304E: XAException occurred. XAException contents and details are: The cause is : null.
[9/13/06 11:39:16:742 IST] 6c9f4838 WSRdbXaResour E DSRA0302E: XAException occurred. Error code is: UNKNOWN XA EXCEPTION CODE: 0. Exception is: [IBM][SQLServer JDBC Driver]There is Uncommitted local transaction work. Can't start an XA transaction until the local work has been committed or rolled back.
[9/13/06 11:39:16:757 IST] 6c9f4838 XATransaction E J2CA0027E: An exception occurred while invoking start on an XA Resource Adapter from dataSource recordmanager/jdbc/sqlserver/ds01, within transaction ID {XID: formatId(57415344), gtrid_length(39), bqual_length(28), data(00000000000001dc0000000148c3909b0b45226df78cc013b7f774854a82fdaa7365727665723148c3909b0b45226df78cc013b7f774854a82fdaa0000000105c83d07)}: javax.transaction.xa.XAException: [IBM][SQLServer JDBC Driver]There is Uncommitted local transaction work. Can't start an XA transaction until the local work has been committed or rolled back.
at com.ibm.websphere.jdbcx.base.BaseXAResource.start(Unknown Source)
at com.ibm.ws.rsadapter.spi.WSRdbXaResourceImpl.start(WSRdbXaResourceImpl.java:927)
at com.ibm.ejs.j2c.XATransactionWrapper.start(XATransactionWrapper.java:1267)
at com.ibm.ws.Transaction.JTA.JTAResourceBase.start(JTAResourceBase.java:164)
at com.ibm.ws.Transaction.JTA.RegisteredResources.startRes(RegisteredResources.java:389)
at com.ibm.ws.Transaction.JTA.TransactionImpl.enlistResource(TransactionImpl.java:1903)
at com.ibm.ws.Transaction.JTA.TranManagerSet.enlist(TranManagerSet.java:494)
at com.ibm.ejs.j2c.XATransactionWrapper.enlist(XATransactionWrapper.java:602)
at com.ibm.ejs.j2c.ConnectionEventListener.interactionPending(ConnectionEventListener.java:745)
at com.ibm.ws.rsadapter.spi.WSRdbManagedConnectionImpl.processInteractionPendingEvent(WSRdbManagedConnectionImpl.java:1446)
at com.ibm.ws.rsadapter.jdbc.WSJdbcConnection.beginTransactionIfNecessary(WSJdbcConnection.java:329)
at com.ibm.ws.rsadapter.jdbc.WSJdbcConnection.prepareCall(WSJdbcConnection.java:1342)
at com.ibm.ws.rsadapter.jdbc.WSJdbcConnection.prepareCall(WSJdbcConnection.java:1292)
at com.ibm.gre.engine.dao.sqlserver.UtilitySQLDAO.getExtendedAttributesById(UtilitySQLDAO.java:108)
at com.ibm.gre.engine.ejb.business.fileplandesign.RelationshipDefinitionEJBBean.getListByFPViewID(RelationshipDefinitionEJBBean.java:236)
at com.ibm.gre.engine.ejb.business.fileplandesign.EJSLocalStatelessRelationshipDefinitionEJB_eb4df5e6.getListByFPViewID(EJSLocalStatelessRelationshipDefinitionEJB_eb4df5e6.java:151)
at com.ibm.gre.engine.ejb.facade.FilePlanDesignControllerEJBBean.getRelationshipDefinitionListByFPViewID(FilePlanDesignControllerEJBBean.java:189)
at com.ibm.gre.engine.ejb.facade.EJSRemoteStatefulFilePlanDesignControllerEJB_e23bb402.getRelationshipDefinitionListByFPViewID(EJSRemoteStatefulFilePlanDesignControllerEJB_e23bb402.java:239)
at sun.reflect.GeneratedMethodAccessor122.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code))
at java.lang.reflect.Method.invoke(Method.java(Compiled Code))
at com.ibm.rmi.util.ProxyUtil$4.run(ProxyUtil.java:703)
at java.security.AccessController.doPrivileged(Native Method)
at com.ibm.rmi.util.ProxyUtil.invokeWithClassLoaders(ProxyUtil.java:701)
at com.ibm.CORBA.iiop.ClientDelegate.invoke(ClientDelegate.java:1084)
at $Proxy5.getRelationshipDefinitionListByFPViewID(Unknown Source)
at com.ibm.gre.engine.ejb.facade._FilePlanDesignControllerEJB_Stub.getRelationshipDefinitionListByFPViewID(_FilePlanDesignControllerEJB_Stub.java:745)
at com.ibm.gre.webclient.businesslayer.ejb.EJBCallAdapter.viewRelationshipDefinitionList(EJBCallAdapter.java:3807)
at com.ibm.gre.webclient.fileplandesign.views.actions.ViewEditAction.greExecute(ViewEditAction.java:135)
at com.ibm.gre.webclient.common.CommonAction.greExecute(CommonAction.java:642)
at com.ibm.gre.webclient.common.CommonAction.execute(CommonAction.java:341)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
at com.ibm.gre.webclient.security.plugin.SecurityRequestProcessor.process(SecurityRequestProcessor.java:58)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.ibm.ws.webcontainer.servlet.StrictServletInstance.doService(StrictServletInstance.java:110)
at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet._service(StrictLifecycleServlet.java:174)
at com.ibm.ws.webcontainer.servlet.IdleServletState.service(StrictLifecycleServlet.java:313)
at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet.service(StrictLifecycleServlet.java:116)
at com.ibm.ws.webcontainer.servlet.ServletInstance.service(ServletInstance.java:283)
at com.ibm.ws.webcontainer.servlet.ValidServletReferenceState.dispatch(ValidServletReferenceState.java:42)
at com.ibm.ws.webcontainer.servlet.ServletInstanceReference.dispatch(ServletInstanceReference.java:40)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.handleWebAppDispatch(WebAppRequestDispatcher.java:974)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.dispatch(WebAppRequestDispatcher.java:555)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.forward(WebAppRequestDispatcher.java:200)
at com.ibm.ws.webcontainer.srt.WebAppInvoker.doForward(WebAppInvoker.java:119)
at com.ibm.ws.webcontainer.srt.WebAppInvoker.handleInvocationHook(WebAppInvoker.java:276)
at com.ibm.ws.webcontainer.cache.invocation.CachedInvocation.handleInvocation(CachedInvocation.java:71)
at com.ibm.ws.webcontainer.cache.invocation.CacheableInvocationContext.invoke(CacheableInvocationContext.java:114)
at com.ibm.ws.webcontainer.srp.ServletRequestProcessor.dispatchByURI(ServletRequestProcessor.java:186)
at com.ibm.ws.webcontainer.oselistener.OSEListenerDispatcher.service(OSEListener.java:334)
at com.ibm.ws.webcontainer.http.HttpConnection.handleRequest(HttpConnection.java:56)
at com.ibm.ws.http.HttpConnection.readAndHandleRequest(HttpConnection.java:618)
at com.ibm.ws.http.HttpConnection.run(HttpConnection.java:439)
at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:593)
I followed the instructions from one of the article about Microsoft SQL Server 2005 JDBC Driver 1.0 (Note I'm using Microsoft SQL Server 2000 and this driver is compatible with SQL Server 2000): copy sqljdbc_xa.dll to SQL Binn directory and execute the script xa_install.sql. And XA Transaction is enabled on the SQL Server 2000 running machine.
Even after have finished all the steps I still get the same error.
Pls help me on this problem.
Thanks in advance
N.Yogendran