Does anybody have any experience/advice on how to ensure that SOAP service call success/failures are returned to the calling app?
Consider a client that calls a SOAP service during which the client goes down and is unable to receive the SOAP response, the work having been done by the service. Similarly, the SOAP service may perform the task but a failure in the return makes the client think the process failed.
What would be the best way to ensure that the client is notified to avoid the call having to be made again?
Are there middleware tools that can be used to provide a form of message queuing for SOAP service calls?
I'm using a SQL-2005 DB to manage TFS Build Information. I need to create a SOAP web service call in response to an INSERT in the Builds table. I am, however, thoroughly confused about the most efficient way to do this. The best I can come up with is to create a CLR function that takes the build number from the DB Insert statement, creates the XML and sends the msg to my already published (and already being used) WebService. The CLR function would be called in a trigger set of by the insert.
I don't suppose there is a native way to generate outbound SOAP msgs based upon DML events?
Hi,Say I have a stored procedure which does two INSERT operation.How can I check if the first INSERT succeeded in order to know if Ishould carry on and do the second one ?Regards
I have a stored proc that uses xp_cmdshell to boot off a batch file on the NT side of the box (box OS is Windows 2000 Advanced Server).
Here is the pertinent code:/*----- Kick off the NT bat job to suck over the data through the web service pipe*/ SELECT @NTCommand = 'D:TradeAnalysisWondaDataStoreJobsPullFromWONDA _InstitutionalRankings.bat ' + CONVERT(varchar(10), @ReqDate, 101) EXECUTE @e_error = master.dbo.xp_cmdshell @NTCommand SELECT @m_error = CASE WHEN ISNULL(@e_error, 0) <> 0 THEN (@e_error + 50000) ELSE @@Error END IF @m_error <> 0 GOTO ErrorHandlerThe trouble is that the batch file is failing (soft error, caught internally to the batch file, which then kills itself, screaming loudly all the way).
The batch file is using the following "voice" in which to scream in pain as it dies (a.k.a., using this code to terminate itself, which kills the cmd shell and returns 13 as an error code)REM WonDBService.exe says we failed Date /T Time /T EXIT /B 13
Meanwhile, back at the ranch (errr...back in stored procedure), what is being returned is a ZERO (in the first code block, @e_error is being set to ZERO when the xp_cmdshell returns from the bat file.
So, now that I have ruled out the obvious *LOL* how can I get my xp_cmdshell to realize it has failed miserably at the one, tiny, simple, not-too-much-to-ask, job that it is designed to do?
I have a number of stored procedures that run one after the other. How do you code to get the success or failure so that some logic can be applied accordingly? I've heard of the TRY CATCH structure, but I new and have yet to use it. How many different ways can success or failure be handled in code?
When I run my package, a task will fail, however, the package will claim that it was successful. Why is this, and how can I trigger a failed package when one task fails?
Please excuse my ignorance as I'm a complete noob when it comes to vb.net.
I have 2 script tasks, each connected to an upstream task via Success and Failure constraints. Each script assigns a value to a variable, depending on whether the task succeeds or fails.
My code thus far is:
Code Snippet Public Sub Main()
Dts.Variables("strEmailBody").Value = _ "Business Model Reporintg Control Complete - Status = Success"
Dts.TaskResult = Dts.Results.Success
End Sub
What i want to do is use a single script task depending on the success or failure of the package, setting the variable value accordingly.
If there are no errors Then
"Success"
Else
"Failure"
I've tried
Code SnippetIF CBool(Dts.Results.Success) Then...
But whislt it compiled, didn't evaluate correctly during runtime.
Can anyone suggest where I'm going wrong? Again I'm totally new to .net and I'm surprised I've gotten this far!
ummm. sorry, I've read and seen the tutorials but somehow and missing this.
I have a foreach container. Inside a dataflow task, with an XML source, a data conversion (cause of urrr UNICODE) and and an ole DB data source.
By design (and for this simple example), I get a volation if I attempt to load loads with out deleting entries from my table. No biggie, I would just like this simple package to rename my file to extension .good or .bad depending on success of each loop. Where and what do I need for this?
I have a SSIS pkg that gets data from SQL and do data conversion and Insert into OLE db AS400 destination, There is a flag column in SQL table , that has to be updated to true, once the records are inserted in AS400 how do i do that in SSIS
SQL oledb ---------> dataConversion ---------------> AS400 OLE db Destination | update SQL table Flag column<---------------------------------|
I have an SSIS package that executes a stored procedure. In that stored procedure is a try/catch block. If the try isn't successful, it goes to the catch block which does a rollback. So when I execute the SSIS package, it tells me that the stored procedure was ran successfully because there essentianlly were no errors and everything ran fine, but in reality, everytime it goes into the catch block and does a rollback, I want the SSIS package to fail as well. How would I send back a failure to the SSIS package from the stored procedure?
I have configured smtp email in MS sql server and configure email to schedular job when schedular jobs become failed. Can i configure email so that email will be sent from scheduler job on both success of job and Failure of job?
We are using SSIS to load some 100k records from flat file to Oracle Destination. We are using Oracle 10g client. But during the execution after some 5hrs or 6hr with 900k records upload we are getting the message Package execution completed. In the Execution results there is no message related to success or failure and the tasks in the Data Flow where yellow in color. What might be the problem? Any information regarding this case will be helpful for us.
Hi, I have scheduled a job that runs every minute. If the job does not succeed, then I would like my front end application to be notified. I am not sure if this is a reasonable way but I am thinking of somehow populating a table (Only if the scheduled job fails) in sql server and then read that table every minute from the front end application.
So, is it possible to populate a table if a job fails? I do not see any options for this in the properties of the job.
I had configured SQL Agent and SQL Mail to use the profile that I created by logging in as the SQL Agent domain admin. service account. The mail service was successfully working. Now, when I create an operator with my mail account and test it, Agent gives the message that the mail was successfully sent, but I don't actually receive any mail.
I have numerous jobs running on my SQL Server machine. Due to the fact that my company will not sanction an e-mail account for a machine (damn them!!) I have no way of knowing (quickly) whether a Job has failed. Does anyone hae any suggestions on how I can create a file or SQL table that is updated every time a job fails? (writing to NT application log is not an option beacause Operations refuse to trawl thru it).
We have an application comprising of a number of SSIS packages that run every few hours. When a package fails, we would like an email to be sent to a pre-configured address with the required information. I would like to use Send Mail task with SMTP server like smtp.sbcglobal.yahoo.com, but this server requires authentication and I need to provide my user_id and password for that. I have not been able to figure out where I can configure user_id and password for getting authenticated by the SMTP server. If SMTP connection cannot be used, is there any other way to notify admin of the failure?
I tried using Query Notification on my computer at home: * Win XP Pro with all the SPs and hotfixes * SQL 2005 with SP1 qand hotfix
Query Notification worked fine.
Then I tried using it at work:
* Win XP Pro with all the SPs and hotfixes
* SQL 2005 with SP1 qand hotfix
and I see the following error in the SQL server log file and notification does not get to the client app:
---------------------------------------------------------- Date 9/1/2006 10:18:30 AM Log SQL Server (Current - 9/1/2006 10:18:00 AM)
Source spid17s
Message An exception occurred while enqueueing a message in the target queue. Error: 15404, State: 19. Could not obtain information about Windows NT group/user 'domainmyuser', error code 0x6e. ----------------------------------------------------------
A similar error shows up in the machine's Event Log.
I am sysadmin and full OS admin on both boxes. The difference is that the computer at home is standalone while the one at work is part of a domain.
I have a SSIS job, one of the last steps it performs is to execute a SQL 2000 DTS package. This has to be done as a SQL 2000 DTS package as it is performing rebuilds of SQL 2000 Analysis Services dimensions and cubes. We've found that when the DTS fails the SSIS job is happily completing showing as a success, we would prefer to know it went wrong.
As far as I'm aware SSIS merely starts the DTS off and doesn't care about it's result. I've taken a look in to turning on the logging for the execute DTS package and thought that the ExecuteDTS80PackageTaskTaskResult would give me the answer I need...but is merely written to the log not available as an event-handler. It also looks like it is not safe to put a SQL task in as the next item to go look at the SQL 2000 system tables to look at the log for the DTS package as the SSIS documentation warns that the DTS package can continue to run after the execute DTS package task has ended.
Ideally I want any error raised within the DTS package to cascade up to be an error in the SSIS job, I can then handle it appropriately. I cannot find a way to do this. Is there a way?
If not, can anyone suggest how in the remainder of the SSIS tasks I can be sure that the DTS has completed before I start any other tasks that will check for the SQL 2000 log of its execution?
I get this error message when I try to connect to Reporting Services via the Management Studio.
I can see my machine listed in the Server Name > Browse For More > Local Servers dialogue. But no luck,
Ive tried:
Servername: localhost Servername: DED1774 (the machine name) Servername: localhost/reportserver Servername: DED1774/reportserver Servername: http://ded1774/reportserver (from the rsreportserver.config file
<UrlRoot>http://ded1774/reportserver</UrlRoot>)
I've Googled the error message and found postings for solutions, but none of these helped. Can anyone suggest some simple steps I can take to try to find the issue and get the connection working?
For our database application we get our primary keys by calling a stored procedure that pass's in the table name and outputs the next primary key number assigned to that table.
ALTER procedure [dbo].[sp_getNextKey]
@TableName char(100),
@NextKey T_ID output
as
SET TRANSACTION ISOLATION LEVEL READ COMMITTED
begin transaction
select @NextKey = NextKeyValue from T_KeyGenerator where TableName like @TableName
update T_KeyGenerator set NextKeyValue = NextKeyValue + 1 where TableName like @TableName
commit transaction
I then take that primary key, and other data, and insert that into the desired table.
The Problem I am having is that my user's keep getting "cannot insert duplicate key in table". So I assume that I do not have the transaction set right, or missing something. I need it to lock the row in the t_keyGenerator table so that no other users can view that row until I update it with the new value and commit the transaction.
i ran a preview of a matrix based report whose column headers are dates. The dates seem to be displaying in a somewhat (not completely) random order from left to right. How can I ensure that they display chronologically from left to right?
I am using web service to synchronize data between SQL Server 2005 on a desktop and a SQL Server Mobile Edition on a mobile device.
Initially, when i added the data source to my mobile application, my .sdf only has 3 records. I am then supposed to retrieve 97 more records from the desktop server when my mobile application runs. After performing merging, I clicked (on my device emulator) on the .sdf deployed under my mobile application and the query analyzer showed all 100 records.
Does this mean my mobile database has been successfully updated with all 100 records? If not, how do I check that? The reason why I am asking this is that the file size of this .sdf with 100 records is still the same as the initial .sdf with only 3 records. How is this possible?
Am I missing anything or getting some concepts wrong? Please enlighten. Thanks.
what are some common techniques for ensuring an isolated temp table scope? For example, if 2 different sprocs happen to crud a temp table with the same name? I'm guessing that big SQL shops establish a standard for this early on to avoid conflicts between sprocs.
I have a SQL Server 2008 instance that is running on "LiveServer" our production database (ProdDB) - and we need to upgrade to 2014. In order to do some upgrade testing, I spun up a VM with the same version of SQL server on the test VM (TestServer), did a backup of the production DB from the live server, and restored it to TestServer under a different name (ProdDBUA).
I then installed SQL2014 Upgrade advisor onto TestServer, and ran it, checking all the boxes (reporting services etc..) and it all came back clean - no issues whatsoever - not a single warning even. I'm under the impression that stored procs/functions etc... all reside within the DB, so a backup will include those. Is that correct?
The problem is, I know I have stored Procs, functions and views that use deprecated joins in that LiveServer.ProdDB. What do I need to do/configure/check in order to make sure that the Upgrade Advisor is actually checking through all that T-SQL that has deprecated code? I want to have a list to give to my report writers of procs/functions/views that need to be rewritten prior to the upgrade going live.
If there is a modification that needs to be run on the TestServer.ProdDBUA, a cursor to change the path etc. DB is running in Compatibility mode 90.
Hi,I have a client that needs to issue soap calls to a third-party webservice from within a DTS package. Is this even possible? I'velooked everywhere and found the sqlxml, but that looks like itprovides a soap web service, not consumes one.Right now, we are consuming the same web service in an ASP.NETapplication and would love to use the same code, but am really justlooking for the best solution. Basically, the only firm requirementsare that the client needs to provide a text file of items that need tobe posted to the third-party via their web service. Right now, we usedts for the client to upload other text files, that's why I was hopingto use the same procedure, but if we need to go another route, I'msure I can convince them.Any suggestions?Trey
Hi,This is the first time I use SOAP. Dont really know the exact pictureyet. Hope you can shed some lights on me.May I know where should I start troubleshooting if I get the followinerror message when running SOAP on Windows 2003, SQL Server 2000 ?Error Code: 0 Error Source= Microsoft VBScript runtime error ErrorDescription: ActiveX component can't create object:'MSSOAP.SOAPClient' Error on Line 1. The step failed.Thanks.
Getting this error after installing certificate. Happens when trying to access https://machinename/reports
Possible SOAP version mismatch: Envelope namespace http://schemas.xmlsoap.org/wsdl/ was unexpected. Expecting http://schemas.xmlsoap.org/soap/envelope/. SQL Server Reporting Services 2005 on Windows Server 2003 R2.
I am sending request to the third party server EX:"Http://somesight.sight.net/company.asp?AC="1000"&Item="200"&DT=05/08/2007" I am getting file in soap format
I created my SOAP endpoint in SQL 2005 sp 2, I worte an ASP.NET 2.0 app to consume the exposed webmethod but how do you add the soap headers in the asp.net app? Basically I want to expose the application name property to set it to determine the actual caller in SQL Profiler. Can it be done without modifying the generated proxy code in ASP.net or is there a workaround ?
