Error #25123 A Sql Mobile DLL Could Not Be Loaded. Reinstall SQL Mobile.
Sep 8, 2007
I receive error 25123 on my PPC (audiovox 6600) in a reproducable way (usually) with .net 2.0 application that is using SQL CE that I wrote:
Open the application
Connect to the database
Close the applicaton
Re-Open the application
Connect to the database <-- Error occurs
I will also receive the error if my application isn't the first application launched (or very close to the first to launch).
I don't believe it's a memory issue as according to the memory manager I have plenty of memory:
At boot up only start screen items loaded: 18.46 Used 49.89 Free
Launch Resco File Explorer to click EXE: 19.18 Used 49.18 Free
Launch my application (no DB connection): 23.64 Used 44.71 Free
Connect to the DB and do select count(*) from a table with 0 rows: 26.27 Used 42.08 Free
Close the application (this.Close() on the form: 19.38 Used 48.97 Free
Relaunch App and connect to DB receive error: around 38 Used around 30 free
I was unable to reproduce the issue right now while typing this message, the last sets of numbers are from memory, and include other applications that are currently running.
The only way I have to get SQL CE to load again is to soft reset the PPC. If the application is able to connect to SQL CE at least once it is fine up till I close it and re-open the application. So it either connects and runs great, or it can't connect at all.
Any help in resolving this issue would be greatly appreciated.
Wayne
View 1 Replies
ADVERTISEMENT
Jun 15, 2006
I am migrating a pocket PC application from VS 2003 to VS 2005 and a few weeks ago I hit the following problem when replicating
A SQL Mobile DLL could not be loaded. Reinstall SQL Mobile. [ DLL Name=sqlceca30.dll]
Scanning forums for help I saw that other people had had this problem and one
http://www.eggheadcafe.com/aspnet_answers/NETFrameworkCompactFramework/Feb2006/post25814466.asp
suggested that this problem could be circumvented by getting the replication object early and then continuously using the same object for subsequent replications.
I did this and it works a lot better now but ever so often I get another error which is
Native Error 28559 SQL Mobile encountered problems when opening the database
My only option at this point is to stop and start the application which cures the problem.
View 4 Replies
View Related
Oct 20, 2006
Hi, in my app I connect to and read from a Sql Mobile database numerous times. Eventually and inconsistently my app will no longer be able to access the database and a SqlCeException is returned with native error 25123. This error translates to: "A SQL Mobile DLL could not be loaded. Reinstall SQL Mobile. [ DLL Name = sqlceqp30.dll ]". I've seen similar (and unsolved) problems involving RDA/replication, but I am not using any of that in my program. It simply connects to database, queries and retrieves data, then closes the connection. I am properly disposing of all SqlCE objects.
I'm not sure what the error really means. Once the program gets this error it is never able to access the database again until the program is restarted. I am still able to connect to that database from the Query Analyizer even after the program gets the error and hasnt been restarted (meaning if the program tried again after the QA's success it will still have same error).
Common suggestions for the similar RDA error are to put the initializion at the beggining of the program. In my case the database connection will succeed several times before the error occurs.
anyone have similar issue where you are not using replication but get error 25123?
View 8 Replies
View Related
May 5, 2008
Hello,
we've got a SQL Server 2005 which replicates with an SQL Server Compact 3.5. Every 10 to 20 synchronisations we're getting the error mentioned above. A Soft reset of the device helps to make the synchronization working again.
Why is this error happening and how can we resolve this?
BTW, we've also running system that replicates with an SQL Server Compact 3.0 without having this problems.
Thanks,
Markus
View 1 Replies
View Related
Aug 8, 2006
Dear ppl,
I am writing an application for a device (MDA Pro T-Mobile) having Windows Mobile 5.0 using
-MS .NET Compact Framework 2.0 SP-1
-SQL Mobile 2005.
-VS 2005 .NET
The application uses Merge Replication. The error occurs in the Synchronise() Method of the SqlCeReplication object.
"SQL Server Mobile encountered problems when opening the database."
repl.AddSubscription(AddOption.CreateDatabase);
repl.Synchronize();
I don't understand why I am having this error. It does create the database on AddSubscription() method but it is failing opening the database on Synchronise(). I have also tried uninstalling and then reinstalling all the SQL Mobile components in the following order.
-sqlce30.wce5.armv4i.cab
-sqlce30.repl.wce5.armv4i.cab
-sqlce30.dev.ENU.wce5.armv4i.cab
However, when i run this application on a device(Dell X50 AXIM) with Pocket PC 2003, it runs fine creating the database and sysnchronising it.
The target platform for the project is Windows Mobile 5.0 Pocket PC SDK.
Does any one have any clue what could be the problem ?
Regards
Nabeel
View 6 Replies
View Related
Mar 23, 2006
Hello,
I am developping a non-managed C++ application for PocketPC using a SQL Server mobile database.
The application is compiled for PocketPC 2003 and uses SQL Server Mobile v2. I use Visual Studio 2005. But I need to compile the application for Windows Mobile 5.0 devices. So I installed the WM5 SDK and had the WM5 into my project configuration.
The "ssceoledb.h" which I include incluses the "transact.h" file. But my problem is that this file is only provided with the PocketPC 2003 SDK and not in the WM5 SDK.
So I cannot use the WM5 configuration project with SQL Server. I also tried with the last SQL Server Mobile 2005 (ie v3.0) and the "ssceoledb30.h" also includes "transact.h".
Did I miss something to install ?
Do you know how I can resolve the problem ?
By advance, thank you for any answer.
--
Gregoire
View 9 Replies
View Related
May 18, 2006
Using MS VS 2005 (incl SQL Server Mobile)
MS Pocket PC 2005 SDK
I am working on a project that builds for Pocket PC on both Mobile 2003 and Mobile 5. The project uses/will use SQL Server Mobile to store local data.
Project created from new with support for both platforms. I include required header files ssceerr30.h and ssceoledb30.h.
Project builds fine in WM2003 configuration, release and debug.
When I build for WM5 the compiler cannot find the header file transact.h. This is included from within ssceoledb30.h. Same as under WM2003.
In WM2003 configuration if I highlight the ssceoledb30.h include in Visual Studio and open the header, it takes me to <Visual Studio dir>SmartDevicesSDKSQL ServerMobilev3.0. I then locate the include for transact.h and do the same, which takes me <Visual Studio dir>SDKPocketPC2003include. The file exists.
If I repeat the above 'browsing' under the WM5 configuration, ssceoledb30.h takes me to a different copy in the WM5 SDK directory. There is no diff between the file here and the other copy used by WM2003. If I attempt to open transact.h - file does not exist.
Fix (which I'm not too sure about, i.e. is it OK?) - If I copy transact.h to the WM5 SDK directory, the project builds.
Why has transact.h disappeared from WM5 SDK?
I can find no ref's to this problem anywhere. Is my installation of the WM5 SDK corrupt? What else could I be missing?
Is there a sample for SQL Server mobile (like the NorthwindOLEDB sample) that comes configured to build for WM5?
View 1 Replies
View Related
Mar 6, 2006
It is possible to access a Sql Server 2005 Mobile database in a VS2003 application (compact framework) ?
Thanks
Robson
View 4 Replies
View Related
Apr 24, 2006
Hi folks, I'm new to Windows Mobile progamming, and new to this forum. Apologies in advance if I'm asking a boneheaded question, but I've done searches and can't find anything directly applicable to my problem.
I'm currently walking through the published MS tutorial in setting up an SQL Server 2005 Mobile application that subscribes to a publication on SQL Server 2005 to exchange information.
I've gotten almost all the way through... successfully set up the server components, creating the publication, etc. On the mobile side, I've been able run the cab files to install the SQL Mobile components and to create the project, add the reference to the dll, and instantiate an engine object. It compiles.
The step in the tutorial after that, though, where you specify the data source from the "data" menu, I've got a problem. When I try to use the "new connection" dialog from choosing the data connection, "MS SQL Server Mobile Edition" doesn't show up as a choice. I've tried choosing any of the other combinations, and in teh subsequent "Connection properties" section my database, SQLMobile (as in their sample) is available, but I get an error when I choose it and click OK. Clicking on "Test Connection" gives me a connection successful message.
My guess is that something about the Mobile server side components is not installed correctly on my development machine, but honestly I have no idea how to begin to fix it. Has anyone seen this problem before and know how to resolve it?
Your time and any knowledge sharing is greatly appreciated.
Thank you,
-Dana
View 8 Replies
View Related
Jul 21, 2006
This is a great tutorial and it's a shame one of the more important steps was missed.
In the €œCreate the snapshot user€? section you you find the steps to create the snapshot_agent account. Then in the €œCreate the snapshot folder€? section you find the share and folder permissions. However, at no point do the instructions advise you about adding the snapshot_agent to the SQL Server Logins. The result is that agent cannot perform the initial snapshot but you won't find this out until 50 steps later after Step 10 in the section €œCreate a new subscription".
To get back on track, openthe Object Explorer's Security section and add the snapshot_agent to your logins. Then using the "User Mappings", set an appropriate level for the SQLMobile database role. Once completed you then need to run the agent.
Right-click the SQLMobile publication you created and select "View Snapshot Agent status". From that dialog you can select "Start" to run the agent. When it completes, you can return to the tutorial section "Create a new subscription" and continue with the tutorial.
View 4 Replies
View Related
Nov 3, 2007
I am studying the tutorial in SQL Server 2005 Mobile Edition Books Online, and the topic is Creating a Mobile Application with SQL Server Mobile. I have got a problem when creating a new subscription after created a new SQL Server Mobile database. And the problem is shown below:
New Subscription Wizard
- Beginning Synchronization (Success)
- Synchronizing Data (100%) (Error)
Messages
* Failure to connect to SQL Server with provided connection information. SQL Server does not exist, access is denied because the IIS user is not a valid user on the SQL Server, or the password is incorrect.
HRESULT 0x80004005 (29061)
* 無法完æˆ?作æ¥ã€‚
- Finalizing Synchronization (Stopped)
- Saving Subscription Properties (Stopped)
Before I have met this problem, I have finished all the task. And I can browse the localhost web site by using anonymous account even I use internet explorer or browse the directly in IIS.
Does anyone can solve it?? Thank you very much~~~
View 3 Replies
View Related
Sep 16, 2007
Hi:
When I try and connecto to SQL CE I always get an invalid operation exception. I"m afraid that I did not follow the proper install for Orcas Beta 2. I can't remember if I was supposed to uninstall SQL Mobile 2005 first or not.
All I know is when I try and use my SQL CE I can't connecto to a DB / sdf file ?
Any help would be appreciated I"m just starting to use SQL CE.
thanks
mark
View 2 Replies
View Related
Jun 6, 2007
Hi ,
I was trying to run my application that has to Synchronize data between sql mobile and sql 2005. In the emulator all is fine and executes without any error.But when I deploy the application in real device it throws an exception:"Authentication failed in server running IIS". The device is WM5.0
The connection string is like this.
String strRemote = "Provider=SQLOLEDB;Data Source=servername;User ID=userid;Password=password;Initial Catalog=databasename";
I am getting the exception only when the application is deployed in the device.
The error log in C:inetpub/wwwroot/Sync is the following:
2007/05/25 12:54:29 Hr=00000000 SQLCESA30.DLL loaded 0
2007/05/25 12:54:29 Hr=80070585 ERR:REQUEST NOT QUEUED for ulRSCBId = -1
2007/05/25 12:54:58 Hr=80070585 ERR:REQUEST NOT QUEUED for ulRSCBId = -1
2007/05/25 12:57:00 Hr=80070585 ERR:REQUEST NOT QUEUED for ulRSCBId = -1
2007/05/25 13:00:37 Hr=80070585 ERR:REQUEST NOT QUEUED for ulRSCBId = -1
2007/05/25 14:55:07 Hr=00000000 SQLCESA30.DLL loaded 0
2007/05/25 14:56:10 Thread=1534 RSCB=2 Command=SCHK Hr=80040E2F The statement has been terminated. 3621
2007/05/25 14:56:10 Thread=1534 RSCB=2 Command=SCHK Hr=80040E2F Violation of PRIMARY KEY constraint 'PK_Orders'. Cannot insert duplicate key in object 'dbo.Orders'. 2627
2007/05/25 19:19:20 Hr=00000000 SQLCESA30.DLL loaded 0
2007/05/25 19:19:20 Hr=80070585 ERR:REQUEST NOT QUEUED for ulRSCBId = -1
2007/05/25 19:20:12 Hr=80070585 ERR:REQUEST NOT QUEUED for ulRSCBId = -1
2007/05/25 19:21:27 Hr=80070585 ERR:REQUEST NOT QUEUED for ulRSCBId = -1
2007/05/25 19:21:47 Hr=80070585 ERR:REQUEST NOT QUEUED for ulRSCBId = -1
Please reply....
View 1 Replies
View Related
Jun 12, 2006
I'm facing a problem when sychronization data between pocket PC and database server.It shows error "A request to send data to the computer running IIS has failed".How can I fix? I'm using Pocket PC 2003 emulator. I can access replication internet url by pocket IE. I also open port for HTTP and HTTPS both.
Best Regards,
View 1 Replies
View Related
Mar 27, 2008
Just released small piece of software with SQL Compact Edition, version 3, dll files distributed with the application.
Now feedback from 2 people suffering an error message as follows:
SQL Mobile usage is restricted on this platform. To use SQL Mobile, you must install SQL Server 2005, Visual Studio 2005, or the Tablet PC SKU.
Both using XP under Admin accounts.
My own testing did throw up this error prior to release, but only when I tried to run the program as a Limited User. I was unable to find out why. Running the program under an Administrator account never produced this error message.
The test-bed was a fresh install of XP, SP 2, running within VMware. An Administrator account was set up. No development software was installed, nor anything to do with SQL. I tried to make it a clean environment to be used by a non-technical user.
Any insights would be most appreciated.
View 8 Replies
View Related
Feb 7, 2006
Hello,
I've
been trying to convert an application to use the CF 2.0, and of course
to SQL Server Mobile. There have been some kinks along the road, but
I've worked all of them out except an error on replication. When I call
the SqlCeReplication's Synchronize() method, the connection goes fine,
it works for about 20-30 seconds, and then comes up with the following
error:
Error code: 0x80004005
Message: The data types cannot be converted implicitly. [ Source data type = nvarchar,Destination data type = image ]
Native error: 25932
Source: Microsoft SQL Server 2005 Mobile Edition
Error Param: nvarchar
Error Param: image
I've
tried upgrading from SQL Server 2000 to 2005 to see if that helped, but
got the same result. I even tried running this from a fresh install of
SQL Server 2005, hoping that'd integrate better with SQL Server Mobile, but that didn't help either.
I found a knowledge base article about error code 0x80004005:
http://support.microsoft.com/kb/912428
However, none of my tables are even remotely close to having 127 columns, so that can't be it.
I
do have an image data type column in one of my tables, but why is a
column being converted from nvarchar to image? Both SQL Server 2005 and
SQL Server Mobile support the image data type, so I don't
understand how that could be causing a problem in the first case.
Any ideas? I've run out of things to try and would appreciate any feedback.
Thanks,
Adrien.
View 8 Replies
View Related
May 24, 2006
I'm going to try and explain this the best I can. I am trying to pull tables from SQL Server 2000 to my Handheld Device (Dell Axim). I've installed the RDA to my web server which is running IIS 6. The RDA is installed correctly cause when I go to http://is-sql-s2/rda/sqlcesa30.dll, I get "SQL Server Mobile Server Agent 3.0." I've installed SQL Server Mobile to my handheld and setup the application but when I try to pull the tables I get an error unable to download tables.
I've gone in to check the RDA Diagnostic informaton and noticed that there is an error. Can seem to find any information about the error. Can someone help me out. THANKS!
General Information
Item
Value
Server Name
is-sql-s2
URL
/rda/sqlcesa30.dll
Authentication Type
Anonymous
Server Port
80
HTTPS
off
Server Software
Microsoft-IIS/6.0
Replication
Allowed
RDA
Allowed
Logging Level
0
Impersonation and Access Tests
Action
Status
ErrorCode
Impersonate User
SUCCESS
0x0
ReadWriteDeleteMessageFile
FAILURE
80070005
SQL Server Mobile Modules Test
Module
Status
ErrorCode
Version
SQLCERP30.DLL
SUCCESS
0x0
3.0.5214.0
SQLCESA30.DLL
SUCCESS
0x0
3.0.5214.0
Reconciler Test
Reconciler
Status
ErrorCode
9.0 Database Reconciler
SUCCESS
0x0
8.0 Database Reconciler
SUCCESS
0x0
SQL Server Module Versions
Module
Version
sqloledb.dll
2000.86.1830.0
9.0 replrec.dll
2005.90.1399.0
9.0 replprov.dll
2005.90.1399.0
9.0 msgprox.dll
2005.90.1399.0
8.0 replrec.dll
2000.80.760.0
8.0 replprov.dll
2000.80.760.0
8.0 msgprox.dll
2000.80.760.0
View 1 Replies
View Related
May 7, 2006
I have been trying to place a binary byte array into the sql server mobile 2005 database and continually get an error "The Identifier cannot be an empty string." when attempting to save this sql to the database:
"INSERT INTO KHZ_Company_Permissions ( PermissionID, CompanyID, StatusID, PluginTypeName, PermissionLevel, ChangeStamp, RecordState ) VALUES (1, 1, 1, 'Plugins.Approval.ApprovalList', 2, System.Byte[], 0)"
the byte array ChangeStamp is a timestamp datatype in the Sql Server Database and is pulled into a custom business object as the .net datatype Byte()
in the debugger, the byte array looks like it should as a timestamp comprised of 8 bytes with the values: 0,0,0,0,0,0,63,181 . but when i attempt to execute the sql statement, i get the sqlceexception "The Identifier cannot be an empty string." if i change the byte to a string and save it as an nvarchar, the value is preserved and i can then pass it back to compare it to the timestamp when synching up to the Sql Server Database later, but i would prefer to maintain the type as a binary datatype, and avoid the string conversion...
When i am creating the sqlstring (which i then run using a sqlcommand/nonquery) i add the binary data to the sqlstring by referencing the .tostring character ... do you think this may be what is causing the error, and if so, is the only way to insert binary data to a sql ce db by using sqlcecommand parameters?
i have found no information to assist with this error, any ideas are much appreciated
View 4 Replies
View Related
May 8, 2006
I am modifying the aplication to visual.net from visual studio 2005 but I have problems ( in this moment i working in my pc , with sql 2000 personal ,windows xp , sql mobile and pc pocket emulator for window ce 5.0)
I don't know but i can't make the Pull in the server.
1) the http://localhost/driver2005/sqlcesa30.dll?diag is correct
2) I don't have the windows firewall
3)the anonimous user have all the permition in the virtual directory..
Where is the error ?
Thanks
View 5 Replies
View Related
Nov 26, 2006
I am trying to deploy my mobile app to treo 700wx, but when i test the app, the application gives me an error message:
sql mobile encountered problems when opening the database
It happens when I sync data.
However, when I sync data users and customer info, it doesn't give this message, But when I sync (third time) order info, this message comes out.
--when i run on my PPC (HP ra1950), there is no this error message.
I think it is a bug?
BTW, which cabs file should I install on the Treo phone? (.Net ce, sql ce mobile30 ???)
Please help me out. Thanks
James
View 3 Replies
View Related
May 19, 2006
I have an SDF using SQLCE 2.0. When I run the app on a Pocket PC device running Windows Mobile 5.0 I get 0x80004005 and 0x80040e21 errors. The same app executes fine on PPC 2003.
The app is written in VC++ using and uses the SQLCE OLEDB Provider to access the SDF. It is complied with eVC 4.0
Any idea as to the problem?
View 5 Replies
View Related
Sep 25, 2007
Hi,
Please provide some help regarding the "Interface Defining Error: IID_IDBDataSourceAdmin" error while trying to create a SDF database using Query Analyzer on a Windows CE 5.0 mobile device (Symbol MC3000).
Error: 0x80004005 E_FAIL
Native Error: 28558
Description: SQL Mobile encountered problems when creating database [,,,,]
Param. 0: 0
Param. 1: 0
Param. 2: 0
Param. 3:
Param. 4:
Param. 5:
A list of (related) installed packages:
NETCFv2.wce5.armv4i.cab
sqlce30.dev.ENU.wce5.armv4i.CAB
sqlce30.repl.wce5.armv4i.CAB
sqlce30.wce5.armv4i.CAB
PS.
Basically I have developed a mobile application that programmatically creates the database, the code worked on a similar device (Win CE 50), trying to run the application on a new device resulted in database creation errors. I tried creating a test database manually .. and this is what I got.
Browsing MSDN or searching on the Forum did not help.
~Zarko Gajic
View 3 Replies
View Related
Mar 3, 2006
I am using VS 2005, SQL 2005, SQL Mobile
The development environment & the SQL Box are two different boxes.
I am trying to create a simple application where I want to synchronize data between Pocket PC application's ( Emulator) local database(SQL Mobile) to SQL 2005 Database. I have tried the steps outlined in the following link
http://msdn2.microsoft.com/en-us/library/ms171908(SQL.90).aspx
Once I have completed all the steps as per the steps in the above link, I have copied the .sdf file to an another machine where I have the development environment. I have created a device application in VS 2005 and created a datasource poiting to the file (.sdf) copied locally.
Then I have added the following code
string filename = @"e:VelsunMobileTest.sdf";
public Form1()
{
InitializeComponent();
}
private void Form1_Load(object sender, EventArgs e)
{
DeleteDB();
Sync();
if (VelsunMobileTestDataSetUtil.DesignerUtil.IsRunTime())
{
// TODO: Delete this line of code to remove the default AutoFill for 'velsunMobileTestDataSet.Customers'.
this.customersTableAdapter.Fill(this.velsunMobileTestDataSet.Customers);
}
}
private void DeleteDB()
{
if (System.IO.File.Exists(filename))
{
System.IO.File.Delete(filename);
}
}
private void Sync()
{
SqlCeReplication repl = new SqlCeReplication();
repl.InternetUrl =
@"http://currdev1/VelsunMobileTest/sqlcesa30.dll";
repl.Publisher = @"currdev1xx";
repl.PublisherDatabase = @"VelsunMobileTest";
repl.PublisherSecurityMode = SecurityType.NTAuthentication;
repl.Publication = @"VelsunMobileTest";
repl.Subscriber = @"VelsunMobileTest";
repl.SubscriberConnectionString = @"Data Source=""e:VelsunMobileTest.sdf"";
Max Database Size=128;Default Lock Escalation =100;";
try
{
repl.AddSubscription(AddOption.ExistingDatabase);
repl.Synchronize();
}
catch (SqlCeException e)
{
MessageBox.Show(e.ToString());
}
}
I would appreciate any help.
Thanks
-Sundar
View 1 Replies
View Related
Feb 2, 2006
I am working with merge replication. The db server is running Windows 2003 Server Std x64 with SQL 2005 Std x64. The IIS server is running Windows 2003 Server Stx x86. The clients are Windows Mobile 5.0 running SQL 2005 Mobile.
I have previously been able to get the test client to initialize a subscription to the publication. I made some changes recently and added about 7 tables, bringing the total articles to 104. Some of the articles have unpublished columns, which means they are using vertical filtering as well. This publication is also using parameterized filters. During publication creation, there are several warnings that "Warning: column 'rowguid' already exists in the vertical partition".
The snapshot agent runs without any errors. When the client attempts to initialize, I get the error "The buffer pool is too small or there are too many open cursors."
My question is 2 part. First, what is causing this error, and second, how can it be resolved?
View 1 Replies
View Related
May 13, 2008
Using the following code we are having a problem connecting a clients WIndows Mobile device to the SDF under IIS. We have success elsewhere. Does anyone have any clues ?
Cheers Al
Dim repl As New SqlCeReplication()
Try
repl.InternetUrl = InternetUrl
repl.Publisher = Repl_Publisher
repl.PublisherDatabase = Repl_PublisherDatabase
repl.PublisherSecurityMode = SecurityType.DBAuthentication
repl.Publication = Repl_Publication
repl.Subscriber = Repl_Subscriber
repl.SubscriberConnectionString = Repl_SubscriberConnectionString
repl.DistributorLogin = Handhelds_User
repl.DistributorPassword = Handhelds_Password
repl.AddSubscription(AddOption.ExistingDatabase)
repl.Synchronize()
MsgBox("Synched!")
Catch err As SqlCeException
MessageBox.Show(err.ToString, "Error")
Finally
Cursor.Current = System.Windows.Forms.Cursors.WaitCursor
End Try
View 3 Replies
View Related
Feb 9, 2007
I have set up a locahost site in IIS using the "Configure Web Synchronization Wizard". One of the first test I was asked to do was to open a broweser and browse to http://localhost/MobileTest/sqlcesa30.dll
If all is well I should get a web page with the following line:
SQL Server Mobile Server Agent 3.0
But unfortunately I get an error stating :
"The server has encountered an error while loading an application during the processing of your request. Please refer to the event log for more detail information. Please contact the server administrator for assistance."
I checekd the Event log and found this error related the IIS launch process on my machine.
DCOM got error "Logon failure: unknown user name or bad password. " and was unable to logon .IWAM_Rataq in order to run the server:
where Rataq is the name of my machine. Could my IWAM_Rataq account be corrupted, my other sites on the machine work.
Infact if i put in a Test.htm page in the virtual directory MobileTest I am able to browse to the page.
Can the Account be re-set? is there another problem that I am not aware of. I have Norton Internet 2006 running could that be the reason? Could Norton be blocking the dll from loading? But the event log states it is a Account error.
Any ideas why this might occur? any help is always appreciated
View 1 Replies
View Related
Jan 27, 2006
I have smilar kind of an issue with replication. I had sucessfully done replication with Sqlce2.0 on sql server 2000. In development machine I had VS 2003, sqlce development tools.
Now I use the same code done in VS 2003 into VS2005, it sucessfully converted the code.
In server machine (win 2003) I installed sql server 2000, sql server 2000 service pack 4, SP4 merge replication components, sql server 2005 mobile server tools and .Net framework 2.0. Created pubication sucessfuly. In this machine I configured IIS as per the web synchronization wizard. Gave anyonymous permissions. Virual direcory is created sucessfully. I tested the server agent in IE http://myservername/aliasname/sqlcesa30.dll.
SQL Server Mobile Server Agent 3.0 is shown
My application opened successfuly in windows mobile 5.0 Pocket PC emulator. When try to sync its dislays error "A request to send data to the computer running IIS is failed, see Hrresult"
No firewall in both development and server machines.
The same code works if its sqlce20 perfectly with vs2003 code. Not in this
Can anyone tell me whats wrong in this?
Regards
Arif
View 5 Replies
View Related
Apr 12, 2006
Hi,
There are many text records need to be storeaged in my application.
I am new guy to Sql Mobile.
If I choose sql mobile to save my data. Will my app be more complex to deploy ?
Before I use Sql Mobile on device(wm5), need I install it first?
any other advice??
Best regards
PWang
View 1 Replies
View Related
Apr 11, 2006
Dear MSDN Support,
It is pleasurable being in contact with you and getting the desired support, for that i am feeling free inquiring about some aspects related to my graduation project.
Well here i am facing a problem with my database. I had created a full Pocket Pc project i added references, datasources and data connection for the SQL Mobile Database i am using. While i do an query like insert,update, delete, select it works on the pocket pc emulator and i check with the emulator query analyzer. What i am asking about that i am not able to see those updates in the mobile database in the sql server 2005 mobile edition, everything is done only in the emulator but after i exit the application and check my mobile server the database is still empty !!
I appreciate your hard working, and i do believe that there is someone here who is going to provide me with the support i need.
I am looking forward to getting your reply soonly.
Thank you for your attention.
Kindly Regards;
View 1 Replies
View Related
Apr 1, 2008
Hi,
I'm trying to install SQL Server 2005 Mobile on a Trimble GeoExplorer (GeoXT). It is running Microsoft Pocket PC v4.20. I've installed on a WM5 device without any problems, but can't seem to get it to work with this device. Regardless of what CAB I use, it says "Unsupported System Version" and will not install. I've tried using both:
sqlce30.wce5.armv4i.CAB
sqlce30.ppc.wce5.armv4i.CAB
, without any success. Any ideas??
View 6 Replies
View Related
Jan 22, 2008
I am geeting following error while trying to acquire db connection. I use sql server ce2.0 with vs2005
Failed to find or load the registered .Net Framework Data Provider
View 3 Replies
View Related
Apr 6, 2007
Hi,
I have created an SQL Server Mobile Database, is it possible to ODBC to it by creating a new data source, under admin tools in Windows XP?
Cheers
View 4 Replies
View Related
