We have an Integration services package that executes a few TSQL tasks, then processes an Analsys Services database. This has been in production for about three weeks now and twice the package has failed with this error from the event log:
Event Type: Error
Event Source: MSSQLServerOLAPService
Event Category: (289)
Event ID: 3
Date: 7/11/2007
Time: 1:48:59 AM
User: N/A
Computer:
Description:
OLE DB error: OLE DB or ODBC error: An error has occurred while establishing a connection to the server.
When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server
does not allow remote connections.; 08001;
Communication link failure; 08S01;
TCP Provider: An existing connection was forcibly closed by the remote host.
; 08S01.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
I don't think that this error is accurate because the package and Analysis Services are on the same server.
Also, this does not happen in our development environment. Any help is appreciated.
I have an Analysis Services Processing Task in my SSIS package. I run the SSIS package using SQL Server job, the running of the package is a job step.
When I process manually the analysis services objects (in practise cubes) using dtexec utility I get a lot of log. In case the processing fails I get error messages that quite well describe the error. But when I run the job the only information I get in the job log is that the job step failed. I know the failure happens in the Analysis Services Processing Task.
Is there any way in SSIS to get a) the log of the Analysis Services processing or b) the error messages of the Analysis Services processing? Or should the processing be done some other way than I've been doing?
I have a cube that we are processing nightly via an Analysis Service Processing Task in SSIS. In order to increase the performance of the processing time, we elected to use a lot of rigid dimension attributes, and do a full process of everything in the SSIS task. The issue that I am having is that after that task completes, I need to go into Visual Studio to deploy the cube becuase we are unable to browse or use the cube. This issue seemed to start once we changed the SSIS Analysis Service Processing Task to do a full process on the dimensions, rather than an incremental.
I would expect that once development is done, and it is processed and deployed, that is it. My thinking is that the SSIS task should just update the already deployed cube,
Hi. I have an Analaysis Services (2005) cube with four dimensions and one fact table (with three partitions - 2006,2007,2008) for which I need to create an SSIS package to process. I only want to process one of the three partitions (2008) - the previous two years should remain unchanged.
This is what I have currently in the Analysis Services Processing Task under Processing configuration: - An object for each of the dimensions with "Process Full." - An object for the 2008 partition with "Process Full."
(Note - Under Process Options, I see only Process Default, Process Full, Unprocess, and Process Data for dimensions and partitions).
Batch settings are: - Processing order: Sequential - Transaction mode: All in one transaction - Dimension errors: Ignore errors - Process affected objects: Do not process
When I execute the package, the cube loses the 2006 and 2007 data.
I am assuming that I have an issue with the Process Option or the Batch Settings, and I would appreciate any guidance!
The last node of my workflow in SSIS is an analysis Services Processing Task, which is supposed to fully reprocess a cube, defined in a different project.
In the configuration, I found the correct cube and setups for it, I thought I wasn't gonna have any problems with it, but it started to complain about user and password information. I thought since the databases configured itself when I added them, the same thing would happen with this Task.
I do have my own user and pass which has permissions to reprocess the cube, although I thought windows authentication would be better then setting up a user and password for the application/task.
I looked in the entire configuration pane and found no information regarding username and password. Where should I set it up, my SSIS solution or the Cube's solution?
This might be a newbie question, I'm not quite sure...
EDIT: Here is the error message: [Analysis Services Execute DDL Task] Error: The following system error occurred: Logon failure: unknown user name or bad password. .
I am trying to run Olap Cube 2000 inside SSIS project. I am using "Analysis Services Processing Task" Object. The Visual Studio Project is sitting on the machine where the analysis 2000 is running but yet i get an error while establish a connection to the Analysis server.
On that machine also install MICROSOFT SQL SERVER 2005 .
the error is: A Connection Cannot be made . Ensure that the server is running.
Does Anybody have an idea to why i get this Error.
I 'm using 'Analysis Services Processing Task' as part of a SSIS package to refresh the cube. in the property page,
the 'loggingMode' is set 'enabled', but there is no records in the sysdtslog90 table while all other tasks are logged in the table. How to logging into the sysdtslog90 table?
I have an olap database "A" and SSIS package "P" which process all the dimensions and cubes in "A" olap database.
I created "A1" olap database copy of "A" and made copy of "P" SSIS package as "P1" I opened "P1" SSIS package and updated olap connection properties "Initial Catalog = A1". A1 is my new olap database.
When I run package "P1" guess what? it processed "A" olap database's cubes and dimensions. Try it, not in production because I did it in production.
We have set up an IS package to process an AS 2005 database (comprising cube & dimensions, etc) daily, via a SQL Server Agent job on both development and production systems. This has been working fine for months.
A new dimension was added to the cube on the development system - automatic processing via the IS package continued without issue. However, when the new dimension was added to the production system the IS package no longer processes the cube correctly. Although all appears ok (and all is present and correct in the logs), no data updates to the cube are made. Only when the cube is manually processed does the cube get updated.
Anyone got any ideas about how to get around this issue? We have created a new IS package, with a single Analysis Services Processing Task, and tried this but get the same outcome.
I am trying to execute an SSIS package from a client that contains an Analysis Services Processing Task in the package. The client that does not have SSIS and SSAS installed. We are getting an error
The task "Analysis Services Processing Task" cannot run on this edition of Integration Services. It requires a higher level edition. The same package runs from a server that has both SSIS and SSAS installed. Let me know if someone has come across the same problem.
We find that if we deploy the OLAP database with a different name on the test server, then regardless of how we change the connection string provided to the SSIS package that processes the cube, then the package fails to connect to the database. To clarify:
In development the OLAP database is called MyOlapDB and the source database is called MySqlDB. Both are on the same machine. When the the application is built and released for test, the test team install the databases on a replica of the production environment (i.e. web app on one machine, OLAP DB on another and SQL database on yet another). They also, quite rightly, implement the new test databases so they incorporate the build version number. So, MyOlapDB123 and MySqlDB123 are both from build 123.
This is when the problems start. Regardless of how the connection string is specified in the job that processes the cube, the SSIS integration package fails with the error:
[Analysis Services Execute DDL Task] Error: Errors in the metadata manager. Either the database with the ID of 'MyOlapDB' does not exist in the server with the ID of 'OurTestServer', or the user does not have permissions to access the object.
We have tried config files and job properties, but neither work. Also, simply attempting to run the package using the DTEXECUI does not work either.
Looking inside the XML of the package, we clearly see the ConnectionManager object which has the original connection string, which is
Data Source=localhost;Initial Catalog=MyOlapDB;Provider=MSOLAP.3;Integrated Security=SSPI;Impersonation Level=Impersonate;
However, editing the initial catalog here still does not solve the problem. Searching the XML for the string MyOlapDB reveals the OLAP database name in two other places - both within the object data of the two Analysis Services Execute DDL tasks.
Anyone know how to solve this problem without having to hack the XML of the package?
I've got this error coming up while running the sql job for AS processing. I can't find anything about it on google or anywhere else. Has anyone had issues like this?
Code Snippet Executed as user: xyzsvc_sqlsvr. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 1:21:02 PM Error: 2008-04-04 13:21:07.41 Code: 0xC1000000 Source: Analysis Services Processing Task Analysis Services Execute DDL Task Description: Internal error: An unexpected error occurred (file 'mdprocessdim.cpp', line 3429, function 'MDProcessPropertyJob::OnLaunch'). End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 1:21:02 PM Finished: 1:21:07 PM Elapsed: 5.141 seconds. The package execution failed. The step failed.
I have created a DTS package which should process an Incremental Update OLAP Cube ... however it is generating the following error message ... HELP has anyone seen this before ?
i have got a SSIS Package, that contains a sequence container with transactionoption "required". Within this sequence I placed different AS processing tasks and different SQL tasks. The transactionoptions of these tasks are set to supported.
My problem: in the case a SQL task fails on execution, all executed tasks are rolled back except the AS processing tasks. The expected and necessary behavior should be, that also the AS processing tasks get rolled back.
Has anyone got a solution or a workaround for this problem?
Hello, I have a problem when trying to fully process an SSAS database using Integration Services "Analysis Services Processing Task" task. I have 2 of these tasks which are responsible for processing the Dimensions then the Cubes. When I run the package either via the BIDS environment or on the local server from the Integration Services engine, I will get an error after about 20 minutes stating:
"Error: Memory Error: Allocation failure. Not enough storage is available to process this command""Error: Errors in the metadata manager. An error occurred when loading the <cube name> cube from the file \?D:Program FilesMicrosoft SQL ServerMSSQL.2OLAPDataMyWarehouse<cube file>.xml"
The cube name is not specific, it will fail and any of my cubes could be in the error log
If I fully process the AS database using the AS engine (logon to local AS server, right-click AS database and click Process), I get no errors at all, it processes and completes fine. The processing options are identical when I run in AS or via the SSIS "Analysis Services Processing Task" task.
I've searched quite a lot online but no joy, the information I have gleaned from various sites does not directly link SSIS with SSAS processing problems.
When either the AS processing starts via SSAS or SSIS the memory usage of MSMDSRV.exe increases to around 1.4 / 1.5 GB but never goes to 2GB ever, even when the error appears.
I've done the following with no effect.
" Have run via AS and works fine " No specific cube it fails on " Have created a Dimension only package, same problem " Changed the maxmemorylimit " Changed the connections to localhost " Memory DOES NOT max out on server
Server Specs: Windows Server 2003 Standard + Service Pack 2 4GM ram, 2GB paging file
I'm fairly new to the SSAS/SSIS world (though not new on databases, etc.) and I'm having some problems with the SSIS packages in our Cube environment.
Currently in our SSAS/SSIS project, we have two major connection managers, one to the database we use for loading the Cube, and the other connector for the cube itself. To load the data from the database to the cube, we wrote some SSIS packages and used the Analysis Service Processing tasks to process all the dimensions and measures. This works pretty good, so no problems here.
The real problem starts, when I try to change the connection parameters, e.g. because the server changed, or the database has been renamed. As soon as the connection managers points to another (existing) cube, regardless if the structure is exactly the same as the one of the old cube, the tasks lose all the assigned objects from their lists. It is really annoying to add all these exactly same objects to the task again. I tried experimenting with the DelayValidation attribute so the Development Studio doesn't destroy my work every time, but when I deploy the package the Cube breaks. Obviously some kind of deeper connection is destroyed when I change the connection string.
Is there a way to prevent the package from breaking/losing objects, without me having to sacrifice 15 minutes every time I change the connection parameters?
I'm getting this error during processing one dimension.OLE DB error: OLE DB or ODBC error: SQL Server blocked access to STATEMENT 'OpenRowset/ OpenDatasource' of component 'Ad Hoc Distributed Queries' because this component is turned off as part of the security configuration for this server. A system administrator can enable the use of 'Ad Hoc Distributed Queries' by using sp_configure. For more information about enabling 'Ad Hoc Distributed Queries', see "Surface Area Configuration" in SQL Server Books Online.; 42000.my dimension contains member from two datasource table.
and in another dimension i get error;Errors in the high-level relational engine. The 'dbo_vicidial_Users' table that is required for a join cannot be reached based on the relationships in the data source view.Errors in the OLAP storage engine: An error occurred while the dimension, with the ID of 'Staging User', Name of 'DimUsers' was being processed.
I get the following error while processing a SSAS tabular model (2014) on a new server.The SSAS service on this server is running under a login which has access to the SQL server data sources. I tried changing the provider to OLEDB from SQLCLNI11 in the connection string but that doesn't work too. The error message isn't useful to debug further.
The cube processing succeeds on a different server. I scripted out the cube DB and ran it on the new server and am trying to process full but it fails with the following error.
Error Message: The operation failed because the source database does not exist, the source table does not exist, or because you do not have access to the data source.
More Details: OLE DB or ODBC error: A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections.
For more information see SQL Server Books Online.; 08001; SSL Provider: No credentials are available in the security package
; 08001; Client unable to establish connection; 08001; Encryption not supported on the client.; 08001. A connection could not be made to the data source with the DataSourceID of 'd7a37dae-be87-44e0-a8b2-498069af82c9', Name of 'connection name'. An error occurred while processing the partition 'XXXX_460f3467-1a99-4dc9-aaf2-bcf3d54a5c4c' in table 'XXXX_460f3467-1a99-4dc9-aaf2-bcf3d54a5c4c'.
The current operation was cancelled because another operation in the transaction failed. The operation failed because the source database does not exist, the source table does not exist, or because you do not have access to the data source.
I have, a SSAS 2012 tabular instance with SP2, there is a database on the instance with a read role with everyone assigned permissions. When configuring the Power BI analysis services connector, at the point where you enter Friendly Name, Description and Friendly error message, when you click next I receive the error "The remote server returned an error (403)." I've tested connecting to the database from Excel on a desktop and connect fine.I don't use a "onmicrosoft" account so don't have that problem to deal with.
We use Power BI Pro with our Office 365. As far as I can tell that part is working ok as I pass that stage of the configuration with a message saying connected to Power BI.The connector is installed on the same server as tabular services, its a Win2012 Standard server. The tabular instance is running a domain account that is the admin account for the instance (this is a dev environment) that account is what I've used in the connector configuration. It's also a local admin account. There is no gateway installed on the server.
I have a problem with scheduling an Analysis Services task.
When I execute the DTS package from EM, every thing works fine.
When I schedule the package from SQL Agent, I get the following error when the job executes:
Error = -2147024770 (8007007E) Error string: The specified module could not be found. Error source: Microsoft Data Transformation Services (DTS) Package
I am running SQL 2K SP3a with Analysis Services 2K SP3a on WIN Server 2003 Std Edition
I have been trying to get an SSIS package to allow me to set as a variable the actual script for running an Analysis Services DDL, want to perform a restore of a cube. Our environment is different for the location for DEV/QA/ and Production, so when I schedule the task to run I want to have the script needed, really just the path to where the backup lives.
Can someone give a solid solution for this? I have not tried to store parameters in a SQL table, but it would seem this is something that can be done through a variable. I have created a package variable and set the value inside and it runs, but if I try to change the value when I run the package it does not set the value I want.
Under Set Values of the package when I go to run I set the following:
Package.Variables[User::RestoreScript].Properties[Value] I get a warning saying: "Warning: Configuration from a parent variable 'RestoreScript' did not occur because there was no parent variable collection.
I also have another variable to set, but same issue.
I have an SSAS 2005 database "A" and SSIS package "P" which process full "A" olap database. SSAS SERVER connection string is based on a variable read from XML configuration file.
It works well in BIDS, but when i deployed, the package failed at the step connecting SSAS, the message is "a connection cannot be made, please ensure the server is running"
In the connnecting string, i am using server name like servera.xx.com, if I change it to IP address, it works. if I change it to Localhost(happens to be on the same server), it works.
But I need the server name solution as IP may be changed.
I am a R data miner who is new to SQL and SSIS and would appreciate any help.
I wanted to automate the process of creating and processing decision tree models for every county in the Country. I wanted to use the foreach loop for iterate through all the counties. I wanted the foreach enumerator to be used by the XMLA code that creates the model so it would append it to the name of the model and i would get a different model for every county. I am not sure how to have the XMLA code accept foreach loop enumerator.
Any help would be greatly appreciated and if you could direct me to a previously done example that would greatly benefit me.
In the SSIS Analysis Services processing task, I was wondering if anyone knows why some dimensions do not have the Process Update option in the list of options for processing them? If there is only Process Full, Process Data, and Unprocess, I am not sure how I can do incremental updates without scripting.
Also, will this affect the cubes if a full process is performed?
I am using the Visual Studio for Integration Services. and creating a database.I am trying to download data from a Cube table (SALES_HISTORY), using a Microsoft OLE DB provider for Analsysis services 10.0. in this table, it has visible 2 fields (SALE_TRANSACTION_ID) and (TRANSACTION DATE) but have many hidden fields, such CUSTOMER, PART_NUMBER, etc . when I try to create a query in the OLE DB source editor, I can see all the fields, and be able to create the SQL command.
However when I want to preview it or parse the query, I have the following message:
Exception from HRESULT: 0x0C0202009 error at data flow task [OLE DB Source [1]]: SSIS Error code DTS_E_OLEDBERROR. an OLE DB error has occurred. Error Code 0x80004005.
an OLE DB record is available. Source: " Microsoft OLE DB Provider for Analysis Services 2008". Hresult:0x80004005 description: Query (1,15) error from the SQL query module the 'Customer' column cannot be found in the 'SALES_HISTORY' table...how to extract the data from the visible and also hidden fields (in excel, are called properties).
I got a problem with my project on reporting services. I installed MS SQL Server 2014 (86x version), Report Builder 3.0 (for creating my reports) and Data Tools for my SQL Server.Now I created a report via Report Builder 3.0 with a SAP NetWeaver as a data source. I could create and view it in Report Builder 3.0.
But when I want to view it on my Report Server it doesn't work. I only get this error."An error has occurred during reporting processing. (Processing Aborted) An attempt has been made to use a data extension 'SAPBW' that is either not registered for this report server or is not supported in this edition of Reporting Services. (rsDataExtensionNotFound)" ...
I found on the internet a few solutions. I installed the Data Tools for the 86x version of the SQL Server. Didn't work. And when I want to change some coding in "RSReportDesigner.config" it says that I'm not allowed to save the changes in this directory.
I am using Custom Data Processing Extension to call a stored procedure. Iam getting following error when creating a dataset in report designer using the extension. I wrote the code in c#.
could not update a list of fields for the query. verify that you can connect to the data source and that your query syntax is correct.(Details-Object reference not set to an instance of an object.)
Here is my code
using System; using System.Collections.Generic; using System.Text; using System.IO; using System.Data;
