Error - Cannot Open The Datafile
Jan 4, 2007
Hi there,
I have written a program that loads a package (SomePackage.dtsx) from the physical drive and executes that. The package does nothing but imports data from a csv file to the Sql server 2005. But I can see that the package is failing continuously. I meant the package.Execute() method is returning a DTSExecResult.Failure. I investigated the Package.Errors property that contains the error collection and found that there are two DTSError objects into the collection.
The first one€™s description says that
Cannot open the datafile "D:SOME.csv".
And the later one€™s is
component "SOURCE FLAT FILE COMPONENT" (1) failed the pre-execute phase and returned error code 0xC020200E.
But the most interesting thing is if I execute the package through the Execute package Utility (double clicking onto the SomePackage.dtsx file) ships with Sql server 2005 then it executes fine and works as expected. I have checked the permission of the csv file and it has everyone€™s full access.
Can anyone help me on this?
I will appreciate all kind of suggestions.
Thanks
Moim
View 14 Replies
ADVERTISEMENT
Mar 12, 2008
Hi,
If I run the package from BIDS, it works fine. If I run the package inside Management Studio it works when I run it as a package.
It does NOT run when I schedule the job.
Error: 2008-03-12 10:51:56.16
Code: 0xC020200E
Source: Data Flow Task Flat File Destination [194]
Description: Cannot open the datafile "D:old_timesheet_reposTimeSheetfilesdate.txt". End Error
Error: 2008-03-12 10:51:56.16
Code: 0xC004701A
Source: Data Flow Task DTS.Pipeline
Description: component "Flat File Destination" (194) failed the pre-execute phase and returned error code 0xC020200E. End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 10:51:55 AM Finished: 10:51:56 AM Elapsed: 0.344 seconds.
The package execution failed. The step failed.,00:00:01,0,0,,,,0
Any idea?
Thanks in advance.
Eric.
View 6 Replies
View Related
Aug 7, 2015
I have a bcp command that works in 2008 standard edition but not in sql 2012 developer edition.
I'm using the SA account in both cases to a local sql server.
Results are attached.
set nocount on
SELECT SERVERPROPERTY('productversion'), SERVERPROPERTY ('productlevel'), SERVERPROPERTY ('edition')
go
select @@version
go
select @@MICROSOFTVERSION
go
exec sp_configure 'xp_cmdshell'
[Code] ......
View 2 Replies
View Related
Aug 19, 2015
I have seen several problems posted where an SSIS package writes a file successfully when executed manually, but fails when executed via SQL Agent job..I have the opposite problem. I'll try to lay it out succinctly: SSIS writes to a file on a shared folder, specified as HostAShare, for example. I created the share and gave full control to Everyone (out of frustration).I'm working from HostA via RDP, connected to the DB on DBHost via SSMS.If I kick off a SQL Agent job that executes the package, it works fine. (SQL job is running under SQL Server Agent Service Account).If I execute the job interactively (logged in to SSMS with Windows Auth), it fails with "Error: Cannot open the datafile "HostASharefilename.ext""We did find that if I RDP directly to the DBHost, I am able to execute manually.Also, if I try executing an xp_command shell command to write a file to the share, it works. (When RDP's into HostA with an SSMS connection to DBHost under my windows domain auth, as above.)The problem is the same when I RDP to any remote host.
View 2 Replies
View Related
Jan 30, 2004
Hi need lots of help here.
I have a dts package scheduled to run hourly as job since recent November. (Win2000 server, MSSQL2000 standard)
Its been running fine, except last few days, SQL Agent shows it attempted to run it but fails
Checking the history for the job i got this error message each time:
================================================== ======
DTSRun: Executing... DTSRun OnStart: DTSStep_DTSDataPumpTask_2
DTSRun OnError: DTSStep_DTSDataPumpTask_2,
Error = -2147467259 (80004005) Error string: Error creating datafile
mapping: The volume for a file has been externally altered so that the
opened file is no longer valid.
Error source: Microsoft Data Transformation Services Flat File Rowset
Provider Help file: DTSFFile.hlp Help context: 0 Error
Detail Records:
Error: 1006 (3EE); Provider Error: 1006 (3EE) Error string: Error
creating datafile mapping: The volume for a file has been externally altered
so that the opened file is no longer valid.
Error source: Microsoft Data Transformation Services Flat File Rowset
Provider Help file: DTSFFile.hlp Help context: 0 DTSRun
OnFinish: DTSStep_DTSDataPumpTask_2 DTSRun: Package execution complete.
Process Exit Code 1. The step failed.
=================================================
The key information i think would be these few lines:
Error creating datafile mapping: The volume for a file has been externally altered so that the opened file is no longer valid.
I don't think its SQL Agent as its scheduling is running other jobs fine(backup)
The DTS package runs fine manually.
Such i suspect dtsrun.exe itself. But where do i go from here?
Thks.
View 1 Replies
View Related
Jan 6, 2004
I receive this error message when I try and run my DTS
package:
"Error opening datafile: The filename, directory name, or
volume label syntax is incorrect."
I set the file name property of the Text File (Source) to
a valid file, but when I run the package and it returns
the above error message, it sets the file name property
to <not displayable>.
Does anyone have any experience with such a problem? If
so please help!!! Thanks
View 1 Replies
View Related
Jan 6, 2004
I receive this error message when I try and run my DTS package:
"Error opening datafile: The filename, directory name, or volume labe syntax is incorrect."
I set the file name property of the Text File (Source) to a valid file, but when I run the package and it returns the above error message, it sets the file name property to <not displayable>.
Does anyone have any experience with such a problem? If so please help!!! Thanks
View 5 Replies
View Related
Jun 26, 2006
Hi,
I am using SSRS Microsoft SQL Server Reporting Services Designers
Version 9.00.1399.00. I want to open linked report in new window.
I tried whats mentioned in http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=240172&SiteID=1 but i get an error on Window.Open method.
How do I solve the problem?
Thanks
View 1 Replies
View Related
Sep 20, 2004
Hi,
I have MSDE SP3 and the only thing that I have changed recently is my Windows login Password. In the
Enterprise Manager the SQL server is registered using mixed authentication.
When I try to open any DTS in Design mode, I get a error dialog with the title 'DTS Design error' and
saying that
"Error occured during creation of a DTS package"
and then when I click on the OKAY button I get the 2nd error dialog saying:
"The selected package cannot be opened. The DTS designer has been closed."
Can someone please help me out here.
Thanks.
View 5 Replies
View Related
Nov 25, 2007
System.Data.SqlClient.SqlError: Cannot open backup device '\.Tape0'. Operating system error 5(error not found). (Microsoft.SqlServer.express.Smo)
i have only one sql instance and tape is istalled successfully.
please help me to find solution for this error.
Thanks,
View 2 Replies
View Related
Nov 7, 2007
I lost my datafile , that's corrupted and I don't have database backup. Any idea ?:(
View 1 Replies
View Related
Nov 3, 2004
If a database consists of more than one datafile, how does SQL Server use the space in these datafiles ?, does it fill up the first one then move to the next and so forth, or does it use up pages across all the files evenly ?.
View 3 Replies
View Related
May 23, 2007
Hi need to something like this:
"alter database modify file (name=<name>, ONLINE)",
but it isn't possible.
Here what I did:
alter database bdj add file (name ='bdjfg1', filename='d:db
djfg1.ndf' )
to filegroup bdjfg;
alter database bdj modify file (name='bdjfg1', OFFLINE);
alter database bdj modify file (name ='bdjfg1', filename='d:db
ewdestdjfg1.ndf' );
--Msg 5056, Level 16, State 4, Line 1
--Cannot add, remove, or modify a file in filegroup 'bdjfg' because
the filegroup is offline.
alter database bdj modify filegroup bdjfg READWRITE;
--Msg 5056, Level 16, State 3, Line 1
--Cannot add, remove, or modify a file in filegroup 'bdjfg' because
the filegroup is offline.
Yes, yes and should have read the cautions section saying:
"Use this option only when the file is corrupted and can be restored. A file set to OFFLINE can only
be set online by restoring the file from backup. For more information about restoring a single file,
see RESTORE (Transact-SQL)."
But I have not an backup of the datafile, but I have the datafile itself!
What can I do to get it online again, the old location could be fine, but it would be better on an new location (thats is the reason for all the trouble, the original drive has not much space left, so I wanted to move the datafile)
What can I do, HELP
/Bjorn
View 1 Replies
View Related
Apr 16, 2008
Looking at the below code you can see that I have a separate Connection for each Insert Statement.'OPEN CONNECTION TO ESOSQL
MyConnection = New SqlConnection("......")
MyConnection.Open()
'check if there are existing charges for this person. The user must enter in atleast 1 charge before proceeding with arrest insert.
MyCheck = New SqlCommand("SELECT * FROM ARREST_CHARGES WHERE ARRESTNO = '" & Session("uid") & "'", MyConnection)
MyCheck.CommandType = CommandType.Text
MyDataReader = MyCheck.ExecuteReader
If MyDataReader.HasRows Then
MyConnection1 = New SqlConnection("...")
MyConnection1.Open()
MyInsert = New SqlCommand("INSERT INTO ARREST_INDEX (ARRESTNO, NOTES) VALUES ('" & Session("uid") & "','" & tx_notes.Text & "')", MyConnection1)
MyInsert.CommandType = CommandType.Text
MyInsert.ExecuteNonQuery()
MyConnection1.Close()
MyConnection2 = New SqlConnection("....")
MyConnection2.Open()
MyOtherInsert = New SqlCommand("INSERT INTO ARREST_COMMENTS (ARRESTNO, NOTES) VALUES ('" & Session("uid") & "','" & tx_notes.Text & "')", MyConnection2)
MyOtherInsert.CommandType = CommandType.Text
MyOtherInsert.ExecuteNonQuery()
MyConnection2.Close()
Label1.Text = ""
Else
div1.Style.Add("display", "block")
Label1.Text = "You must enter charges before proceeding."
End If
MyConnection.Close()One would think I should only have to use one connection. However, if I use only one I get this error:There is already an open DataReader associated with this Command which must be closed first. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidOperationException: There is already an open DataReader associated with this Command which must be closed first.Source Error: Line 60:
Line 61: MyInsert.CommandType = CommandType.Text
Line 62: MyInsert.ExecuteNonQuery()
Line 63:
Line 64: ' MyConnection1.Close()The only way I could get rid of it was to encapsulate each individual INSERT statement within its own connection. This seems to me as very inefficient. Can anyone explain why I couldn't just use one connection?Thanks.
View 5 Replies
View Related
Feb 14, 2005
Hi, I am accessing an MSDE Database from within a C# program. When calling the OleDbConnection.Open() method, I get the following error:
Exception: System.Data.OleDb.OleDbException
Message: Object was open.
at System.Data.OleDb.OleDbConnection.ProcessResults(Int32 hr)
at System.Data.OleDb.OleDbConnection.InitializeProvider()
at System.Data.OleDb.OleDbConnection.Open()
Now I do not know what this means, since the Connection isn't open. And I do not know why this occurs. I am accessing the same database (but other tables) in the same program several times in the same way and do not get this error.
Any ideas?
View 2 Replies
View Related
Sep 25, 2001
Hello All,
One of my clients is accessing SQL Enterprise Manager via
Citrix. He is getting an error message 'Unexpected error occured during this operation' while opening tables and displaying all rows in Enterprise Manager.
When I try the same thing through Enterprise Manager installed locally on my PC, I do not get any errors.
Has anybody faced a similar problem?
I am quite new to SQL Server. Please help.
Thanks in advance
Sumathy
View 1 Replies
View Related
Nov 8, 2005
I created a few DTS packages in our Test Server saving them as file.dts. When I try to open them in from the production server I get an Unexpected error and the DTS is not opened. Do you have any fresh idea for me, please? Thanks!! :)
View 1 Replies
View Related
Jul 23, 2005
Help! One of my main databases has been marked as suspect - theinitial problem is that my disk had no space. So I moved some files,made some space, stopped & restarted the service, and now I get thiserror in the errorlogs. There can't be anything else using thedatabase - I restarted the machine to kill everything that might betouching it, including the client application.2005-03-30 14:35:21.96 kernel udopen: Operating system error 32(Theprocess cannot access the file because it is being used by anotherprocess.) during the creation/opening of physical devicec:mssql7data<database>.mdf.2005-03-30 14:35:22.01 kernel FCB::Open failed: Could not open devicec:mssql7data<database>.mdf for virtual device number (VDN) 1.2005-03-30 14:35:22.03 spid6 Device activation error. The physicalfile name 'c:mssql7data<database>.mdf' may be incorrect.
View 1 Replies
View Related
May 8, 2007
I am developing a web service that uses a sql data connection.
The sql database is on a server, and the development version of my web service is on my pc.
I can connect/access the data accross my network when I run the service on my PC, but as soon as I put the web service onto the server(with the sql) it displays, the service wont function - error: 40 - could not open a connection....
I presume that sql is configured correctly as I am recieving data back when I request it accross the network. I dont understand why it wont work when I have the service on the server with the sql?
Any help will be appreciated.
View 4 Replies
View Related
Feb 23, 2008
Hello everyone:
I am developing a PDA application, everything is fine for me, but when I try to open Sdf DataBase (was generated by the Wizard ADS ), it gives me the following error pda:
Unable to load a DLL SQl Server Compact. Reinstall SQL Server Compact. [DLL name = sqlcese35.sys.dll]
I commented that i reset the hardware pda several times and I have reinstalled these files:
sqlce.dev.ES.wce5.armv4i.CAB
sqlce.repl.wce5.armv4i.CAB
sqlce.wce5.armv4i.CAB
They are located at:
C:Program FilesMicrosoft SQL Server Compact Editionv3.5Deviceswce500armv4i
They say that my PDA have Windows Mobile 6.0, i development in Visual Studio 2005 C#, and the processor is a Marvell in uan IPAQ 114 Classic, my doubts are several:
-- Is this the whole package for this processor?
-- How to i konw that the package it is up to each type of processor?
-- If this package ... What should I do to correct the mistake?
Best regards and thanks in advance.
Albert
View 4 Replies
View Related
Jan 9, 2007
I am getting the following error when running some of my reports that use a Report Model on a recently built Windows 2003 R2 server with SQL Server 2005 SP2 intalled. The reports run fine our SQL Server 2005 RTM server.
W3wp!webserver!7!01/09/2007-12:57:58:: e
ERROR: Reporting Services
error Microsoft.ReportingServices.Diagnostics.Utilities.RSException:
An error has occurred during report processing. ---> Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing. ---> System.InvalidOperationException:
There is already an open DataReader associated with this Command which must be closed first.
Any help would be appreciated.
Rick
View 2 Replies
View Related
Mar 1, 2007
Hi,
I am trying to connect to my SQL Server 2005 but it gave me following error message.
TITLE: Connect to Server
------------------------------
------------------------------
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)
So, Please help me to solve this problem.
tnks.
View 20 Replies
View Related
Apr 23, 2008
Hi Friends,
Im using .Net2008 and MS SQL Server2005, I Have a web application , i want to connect to the server machine SQL Server, When i run the application im getting the following error.
Im trying to connect to the database from local machine application to server machine database
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
My WebConfig File is<connectionStrings>
<add name="NewConnectionString" connectionString="Data Source=sqlserverservername.com;Initial Catalog=Test;UID=User;PASSWORD=Pwd;Integrated Security=True;connect timeout=30" providerName="System.Data.SqlClient"/></connectionStrings>
<appSettings>
<add key="connectionstring" value="Data Source=Sys67;Initial catalog=DB;user id=sa;password=sa;connect timeout=30"/>
</appSettings>
Please Help me to sortout this ISSUe, Its very urgent please
View 7 Replies
View Related
Aug 3, 2001
Hi,
Is there any way to change the location for the datafile. I need to change the drive from say c to d because it is filling up. Is there anyway to do this or do I have to recreate the database from scracth. I have a whole lot of data in the database already.
Thank you all.
View 1 Replies
View Related
Dec 14, 2004
Hi All,
I have a database -- MDB -- with datafile for data and transaction log under the folder d:mssqldata . Now i want to move the data file from d: to e:, say e:mssqldata . Can someone let me know if this is possible under SQL server v7.0 and if so, how
View 2 Replies
View Related
Nov 2, 2005
Hi,
i try to shrink and remove one datafile. But i always get following error:
Server: Msg 5042, Level 16, State 1, Line 1
The file 'M1Pdata15' cannot be removed because it is not empty.
***********************************************
use M1K
go
dbcc shrinkfile (M1Pdata15,emptyfile)
go
use master
go
Alter database M1K
remove file M1Pdata15
go
***********************************************
Microsoft SQL Server 2000 - 8.00.760 (Intel X86)
After Shrinking the file has 1.94 MB.
please help.
thx
DocHolliday1108
View 5 Replies
View Related
Nov 10, 2005
Hi,
In SQL Server 2000 how to move a secondary data file to different filegroup without removing and re-creating the secondary data file.
Thanks in advance.
-S
View 1 Replies
View Related
Aug 17, 2006
I obviously did not search the archives on the right terms so what isthe easiest and fastest way to move a 3G database from a nearly full Cdrive to the nearly empty D drive that should have been used.I could back it up, drop it, recreate it using the D drive, and restoreit but it seems like there should be a way to just move the datafileand use if from the new location.I am thinking that detatch/attach is the best method, but I would likeconfirmation or suggestions on how to proceed or things to be aware ofwhen using this method.-- Mark D Powell --
View 8 Replies
View Related
May 19, 2007
Hi,
I want to insert the contents of a data file into a SQL Server table with XML datatype column using SSIS. I am fairly new to SSIS and script tasks.
Example:
Salary Data file:
EmpID, Name, Salary
100, John, 100000
200, Scott, 200000
Database Table:
create table xmlTable (id int identity(1,1), xmlColumn XML)
The contents of the file needs to be written to xmlTable. For each row in the Salary Data file there will be a corresponding row in the xmlTable.
xmlTable (Result):
1, <EmpID 100...>
2,<EmpID 200...>
Any help with details is greatly appreciated.
Thanks,
Rob
View 4 Replies
View Related
Nov 1, 2006
HiI'm trying to loop through all the records in a recordset and perform a database update within the loop. The problem is that you can't have more than one datareader open at the same time. How should I be doing this? cmdPhoto = New SqlCommand("select AuthorityID,AuthorityName,PREF From qryStaffSearch where AuthorityType='User' Order by AuthorityName", conWhitt)conWhitt.Open()dtrPhoto = cmdPhoto.ExecuteReaderWhile dtrPhoto.Read()If Not File.Exists("D:WhittNetLiveWebimagesstaffphotospat_images_resize" & dtrPhoto("PRef") & ".jpg") ThencmdUpdate = New SqlCommand("Update tblAuthority Set NoPhoto = 1 Where AuthorityID =" & dtrPhoto("AuthorityID"), conWhitt)cmdUpdate.ExecuteNonQuery()End IfEnd WhileThanks
View 7 Replies
View Related
Feb 12, 2007
Hi,
I've created an "ASP.NET Web Application" project in Visual Studio and I want to simply open a connection to a database in SQL Server. All I have done is adding these 3 lines below without modifying any other generated codes by Visual Studio.(I've done this within code behind in Page_Load() not by <script> tag within HTML code)
public class WebForm1 : System.Web.UI.Page { private void Page_Load(object sender, System.EventArgs e) { // Put user code to initialize the page here SqlConnection c = new SqlConnection(); c.ConnectionString = "workstation id=BABAK;integrated security=SSPI;initial catalog=db1;persist security info=False"; c.Open(); } ... }
But I get this error :
Server Error in '/projects/fortest/tDB2' Application.--------------------------------------------------------------------------------
Login failed for user 'BABAKASPNET'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Login failed for user 'BABAKASPNET'.
Source Error:
Line 24: SqlConnection c = new SqlConnection();Line 25: c.ConnectionString = "workstation id=BABAK;integrated security=SSPI;initial catalog=db1;persist security info=False";Line 26: c.Open();Line 27: }Line 28: Source File: c:inetpubwwwrootprojectsfortest db2webform1.aspx.cs Line: 26
What's wrong ?
View 2 Replies
View Related
Jul 11, 2007
I posted this on the Dotnetnuke forums but no answer for it, so since it is a SQL error I guess maybe someone here might know.
I installed the core forum that comes with the installation, the page runs great until I add the forum module.
I get this error:
A critical error has occurred.An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
The portal is in godaddy if this can help.
Thanks,
Erick
View 1 Replies
View Related
Feb 7, 2008
hI I have a website which is on a web server owned by another companyI have webpages which should connect from the web server to sql server 2000 which is based at my companyhowever I am getting the error messageAn error has occurred while establishing a connection to the server.
When connecting to SQL Server 2005, this failure may be caused by the fact that
under the default settings SQL Server does not allow remote connections.
(provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL
Server) When the website was on citrix it connected fine, however once it has moved to a web server it does notI have checked and tcp/ip and named pipes are both enabled any1 any ideasthanks in advance!! :-)
View 13 Replies
View Related
