Hi all,
I am using Microsoft_Time_Series and have set HISTORIC_MODEL_GAP to various values (from 1 to 21). I always get this error:
Error (Data mining): The 'HISTORIC_MODEL_GAP' data mining parameter is not valid for the 'My Time Series' model.
In Algorithm Parameters window, this parameters is not there by default, so I have to add it.
Any tip will be greatly appreciated.
I'm a beginner with SQL 2012 SSDT & SSMS. I get this error message when I try to deploy my project:Â
"Error 6
Error (Data mining): KEY SEQUENCE columns are not supported at the case level. The 'Customer Key' column of the 'TK448 Ch09 Cube Clustering' mining structure contains content that is not valid.
0 0
"
I am finding it hard to locate the content that is not valid. I've been trying to find a answer for this problem but can't seem to find anything. How can I locate the content that is not valid and change or delete it so that I can deploy this solution?
Hoping someone will have a solution for this error
Errors in the metadata manager. The data type of the '~CaseDetail ~MG-Fact Voic~6' measure must be the same as its source data type. This is because the aggregate function is not set to count or distinct count.
Is the problem due to the data type of the column used in the mining structure is Long, and the underlying field in the cube has a type of BigInt,or am I barking up the wrong tree?
Hi, all here,
I am wondering where can I store my mining results in data mining engine? For example, I got mining results like accuracy chart, decision trees, and other formats of results based on different mining algorithms I used for my data mining, so where can I actually store the results for reporting service use later? Is it possible to do that in SQL Server 2005?
Thanks a lot for any help and guidance in advance.
I followed the tutorial posted at [URL] ...
Everything was ok until the last step where I had to process the mining structure which resulted in a warning
"Informational (Data mining): Decision Trees found no splits for model, Tbl Decision Tree Example."
What does this error mean? How do I resolve it? Also, I only see the first level in the Mining Model Viewer, I don't see the levels 2 and 3.
Hi, all experts here,
I would like to know if there is any way to migrate third-party data mining packages with SQL Server 2005 data mining algorithms together then we can have a comparison among all of them to get the best results for training models.
I am looking forward to hearing from you.
Thanks a lot.
With best regards,
Yours sincerely,
Having successfully created :
- a data mining structure with about 80 columns.
- a data mining model using Microsoft_Decision_Trees with 2 prediction columns.Â
I thought I would then explore the possibility of have more than 2 prediction columns, in this case 20.
I get an error message and I can't work out :
a) if this is because there's a limit to the maximum number of prediction columns and where that maximum is stated.
b) if something else has become corrupted
c) there's a know bug and if the error message is either meaningful or not.
Either way, I'm unable to complete the data mining wizardÂ
The error message is :Errors in the metadata manager. Either the mining structure with the ID of '[my model Structure]' does not exist in the database with the ID of 'DMAddinsDB', or the user does not have permissions to access the object.
Implementing data mining Add-in in an academic setting? We need to handle over 150 new students a semester and have their connection to Analysis Services survive for their four years at the college. We are introducing data mining to every freshman business student as a unit within their Intro to Excel class (close to a month of work to give them a sense of what is possible). Other courses later in their curriculum will expand on that introduction.Â
Once implemented, we would have as many as 900 connections to manage (four years from now). It is possible that multiple sections will be running at the same time, so 40 students may be accessing the data mining tools concurrently. Â
Is there a way to "bulk establish" the access credentials and establish those databases?
With SASS Database i have created Data mining Structure Using Time series algorithm, while processing the SSAS db, Data mining  taking long time to process, so how we can  reduce processing time ???
View 2 Replies View RelatedHi,
I have just run a simple data set through a model to predict a simple true or false value (i.e. binary output)
The Lift Chart/Mining Legend in Analysis Services shows three results €“ Score, Population Correct (%), and Predict Probability (%)
Population Correct I beleive is the percentage of predictions it got right out of the total number of predictions it tried to make. Is this correct?
However, I can€™t work out how the other two are derived in particular the 'SCORE'. To give a live example the scores were as follows:
Model Score Pop Correct Pred Probability
Decision Trees 0.83 76.59% 54.28%
Neural Network 0.75 67.63% 50.05%
Ideal Model 100.00%
Can anyone help with this and give a detailed explanation?
Many thanks,
S Rajput
Hi,
I am trying to model data in analysis services with the Advance Create Mining Model function in the excel addin. I am having trouble creating an association model that works like the Associate button above the Advanced button.
The format of my data is like this
OrderID Product
100 Bike
100 Helmet
100 Shoes
200 Helmet
200 basketball
200 Bat
300 Shoes
300 Socks
The associate button works perfectly since it asks me which column is the transaction id (orderid) and which column I am trying to predict (product). The advanced create mining model asks me to determine what the columns are...
OrderID=key Product=Input+Predict?
When I run the advance create mining model associate, I get a browser that gives me no rules and the support for only one item itemset (each product but no combination of products).
Does anyone know what I have to do to get it to work like the associate button?
I perform data mining on all products and a specific product category.
Do I need to create 2 data source views, one for all products and the other one for the specific product category?
Afterward, I run the Data Mining Wizard 2 times to create 2 mining structures.
I also need to add the same mining model (e.g. Bayes, Cluster) to each of these mining structures.
Is there any simple way to do it?
Thanks.
Joe.
Hello,
I am getting error messages when trying to run some of the features in the Data Mining addin for Excel. The error message says:
"Could not load file or assembly 'Microsoft.DataWarehouse, version=9.0.242.0, Culture-neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified."
Some features work fine (ex: highlight exceptions), but others don't (ex: detect categories).
Any clue?
Configuration:
- SQL Server with SP2 and hot fix build 3054
- Excel 2007
- Windows XP all in one box
Regards,
Joao
Hi, all here,
Thank you very much for your kind attention.
I am wondering if it is possible to use SSIS to sample data set to training set and test set directly to my data mining models without saving them somewhere as occupying too much space? Really need guidance for that.
Thank you very much in advance for any help.
With best regards,
Yours sincerely,
I downloaded a copy of sql server and when I run the following query in the sql management studio after choosing new query , DMX I get the above error
CREATE MINING MODEL [NBSample]
(
CustomerKey LONG KEY,
Gender TEXT DISCRETE,
[Number Cars Owned] LONG DISCRETE,
[Bike Buyer] LONG DISCRETE PREDICT
)
Using Microsoft_Naive_Bayes
Also in the pane Mining Model I get the message No mining models found. The only error I get when I installed SQL server was a COM plus registration error. I am running Windows XP SP2. Can someone please help.
Vijay Mukhi
HOD Helios
I am trying to write some DMX queries to create and populate a mining model as a SSMS analysis services project. I followed the following steps:
1. Create the mining model using a CREATE MINING MODEL ... query.
2. Followed by the - INSERT INTO MINING MODEL ... query, which fetches prediction data from another mining model to populate the mining model.
3. I now want to use this new model for prediction, which requires processing the mining model first. When I process the model, it throws the following error:
Error (Data mining): The 'XYZ_Structure' structure does not contain bindings to data (or contains bindings that are not valid) and cannot be processed.
Please suggest if I am making a mistake in the above procedure. I will appreciate all help in overcoming this issue.
Auxilliary question: How do I process the mining model programmatically?
Hello,
I wrote a data mining plug-in algorithm in SSAS and now I am trying to view the lift chart in Management Studio. The studio gives the following error:
"The Data Mining Query builder control cannot be initialized due to the following problem:
Deserialization failed: Multiple definition of element 'Column12' causes the content model to become ambigious. A content model must be formed such that during validation of an element information item sequence, the particle contained directly, indirectly or implicitly therein with which to attempt to validate each item in the sequence in turn can be uniquely determined without examining the content or attributes of that item, and without any information about the items in the remainder of the sequence."
I really do not understand what i did wrong. Can anybody help me?
Thanks, Joris
Hello Experts,
I have an error message I was wondering if anyone else has seen and resolved. When I open excel and click on the query wizard on the Data Mining Ribbon, I get an error message that says "Input String not in Correct Format"
After I close this dialog box the 'Welcome to Query .... ' wizard will open, but when I select the Advance button my process aborts due to the input string error.
I have only ran association models on the computer.
The Manage Models and Browse buttons work fine.
The error came up on Friday, but it wasn't there on Thursday. There were no changes done to the machine (no installation of new software).
I have tried reinstalling the add-in.
Thank you all for your help,
Davy
I have pasted the SQL syntax below that I get from the error dialog box after the query wizard closes.
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.SqlServer.DataMining.Office.Excel.QueryBuilder.QueryBuilderParameters.UpdateNestedColumnName()
at Microsoft.SqlServer.DataMining.Office.Excel.XLClientUIManager.DisplayAdvancedQueryBuilder(Object sender, WizardPageEventArgs e)
at Microsoft.SqlServer.DataMining.Office.Excel.Wizard.WizardPageBase.OnWizardPageAdvanced(WizardPageEventArgs e)
at Microsoft.SqlServer.DataMining.Office.Excel.Wizard.WizardForm.btnAdvanced_Click(Object sender, EventArgs e)
at System.Windows.Forms.Control.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnClick(EventArgs e)
at System.Windows.Forms.Button.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
Microsoft.SqlServer.DataMining.Office.Excel.DMClient
Assembly Version: 9.0.242.0
Win32 Version: 9.00.3154.00
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.SqlServer.DataMining.Office.Excel.DMClient/9.0.242.0__89845dcd8080cc91/Microsoft.SqlServer.DataMining.Office.Excel.DMClient.dll
----------------------------------------
Extensibility
Assembly Version: 7.0.3300.0
Win32 Version: 7.00.9466
CodeBase: file:///C:/WINDOWS/assembly/GAC/Extensibility/7.0.3300.0__b03f5f7f11d50a3a/Extensibility.dll
----------------------------------------
office
Assembly Version: 12.0.0.0
Win32 Version: 12.0.4518.1014
CodeBase: file:///C:/WINDOWS/assembly/GAC/office/12.0.0.0__71e9bce111e9429c/office.dll
----------------------------------------
Microsoft.SqlServer.DataMining.Office.Common
Assembly Version: 9.0.242.0
Win32 Version: 9.00.3154.00
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.SqlServer.DataMining.Office.Common/9.0.242.0__89845dcd8080cc91/Microsoft.SqlServer.DataMining.Office.Common.dll
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
Microsoft.SqlServer.DataMining.Office.Excel.DMClientControls
Assembly Version: 9.0.242.0
Win32 Version: 9.00.3154.00
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.SqlServer.DataMining.Office.Excel.DMClientControls/9.0.242.0__89845dcd8080cc91/Microsoft.SqlServer.DataMining.Office.Excel.DMClientControls.dll
----------------------------------------
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
zd8aixcw
Assembly Version: 9.0.242.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
stdole
Assembly Version: 7.0.3300.0
Win32 Version: 7.00.9466
CodeBase: file:///C:/WINDOWS/assembly/GAC/stdole/7.0.3300.0__b03f5f7f11d50a3a/stdole.dll
----------------------------------------
Microsoft.Office.Interop.Excel
Assembly Version: 12.0.0.0
Win32 Version: 12.0.4518.1014
CodeBase: file:///C:/WINDOWS/assembly/GAC/Microsoft.Office.Interop.Excel/12.0.0.0__71e9bce111e9429c/Microsoft.Office.Interop.Excel.dll
----------------------------------------
Microsoft.SqlServer.DataMining.Office.Excel.TableAnalytics
Assembly Version: 9.0.242.0
Win32 Version: 9.00.3154.00
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.SqlServer.DataMining.Office.Excel.TableAnalytics/9.0.242.0__89845dcd8080cc91/Microsoft.SqlServer.DataMining.Office.Excel.TableAnalytics.dll
----------------------------------------
Microsoft.SqlServer.DataMining.Office.Excel.Wizard
Assembly Version: 9.0.242.0
Win32 Version: 9.00.3154.00
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.SqlServer.DataMining.Office.Excel.Wizard/9.0.242.0__89845dcd8080cc91/Microsoft.SqlServer.DataMining.Office.Excel.Wizard.dll
----------------------------------------
Microsoft.AnalysisServices.AdomdClient
Assembly Version: 9.0.242.0
Win32 Version: 9.00.3042.00
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.AnalysisServices.AdomdClient/9.0.242.0__89845dcd8080cc91/Microsoft.AnalysisServices.AdomdClient.dll
----------------------------------------
System.Data
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll
----------------------------------------
System.Web
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Web/2.0.0.0__b03f5f7f11d50a3a/System.Web.dll
----------------------------------------
Microsoft.mshtml
Assembly Version: 7.0.3300.0
Win32 Version: 7.0.3300.0
CodeBase: file:///C:/WINDOWS/assembly/GAC/Microsoft.mshtml/7.0.3300.0__b03f5f7f11d50a3a/Microsoft.mshtml.dll
----------------------------------------
Microsoft.DataWarehouse.Interfaces
Assembly Version: 9.0.242.0
Win32 Version: 9.00.3042.00
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.DataWarehouse.Interfaces/9.0.242.0__89845dcd8080cc91/Microsoft.DataWarehouse.Interfaces.dll
----------------------------------------
Microsoft.AnalysisServices.Viewers
Assembly Version: 9.0.242.0
Win32 Version: 9.00.3042.00
CodeBase: file:///C:/Program%20Files/Microsoft%20SQL%20Server%202005%20DM%20Add-Ins/Microsoft.AnalysisServices.Viewers.dll
----------------------------------------
Microsoft.DataWarehouse
Assembly Version: 9.0.242.0
Win32 Version: 9.00.3042.00
CodeBase: file:///C:/Program%20Files/Microsoft%20SQL%20Server%202005%20DM%20Add-Ins/Microsoft.DataWarehouse.DLL
----------------------------------------
Microsoft.AnalysisServices.Graphing
Assembly Version: 9.0.242.0
Win32 Version: 9.00.3042.00
CodeBase: file:///C:/Program%20Files/Microsoft%20SQL%20Server%202005%20DM%20Add-Ins/Microsoft.AnalysisServices.Graphing.DLL
----------------------------------------
Microsoft.AnalysisServices.Controls
Assembly Version: 9.0.242.0
Win32 Version: 9.00.3042.00
CodeBase: file:///C:/Program%20Files/Microsoft%20SQL%20Server%202005%20DM%20Add-Ins/Microsoft.AnalysisServices.Controls.DLL
----------------------------------------
Microsoft.SqlServer.CustomControls
Assembly Version: 9.0.242.0
Win32 Version: 9.00.2047.00
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.SqlServer.CustomControls/9.0.242.0__89845dcd8080cc91/Microsoft.SqlServer.CustomControls.dll
----------------------------------------
Microsoft.NetEnterpriseServers.ExceptionMessageBox
Assembly Version: 9.0.242.0
Win32 Version: 9.00.1399.00
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.NetEnterpriseServers.ExceptionMessageBox/9.0.242.0__89845dcd8080cc91/Microsoft.NetEnterpriseServers.ExceptionMessageBox.dll
----------------------------------------
Microsoft.AnalysisServices.OleDbDM
Assembly Version: 9.0.242.0
Win32 Version: 9.00.3042.00
CodeBase: file:///C:/Program%20Files/Microsoft%20SQL%20Server%202005%20DM%20Add-Ins/Microsoft.AnalysisServices.OleDbDM.DLL
----------------------------------------
CustomMarshalers
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/CustomMarshalers/2.0.0.0__b03f5f7f11d50a3a/CustomMarshalers.dll
----------------------------------------
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
Good afternoon,
I'm doing a custom clustering plugin for text to pre-process ("clean" the texts), calculate weights, estimate the number of clusters (using the PBM index) and finally, do the actual clustering.
So... I've made each of these modules on C++ and I'm putting them all togheter on the plugin.
My database (MDB file) has only one table, with only two fields within: a key (auto-incremental) and a small text. What I intend to do is to get the text in each test case, store them togheter somewhere and call my classes to cluster these texts.
I'm trying to log the texts in a file (just a test) on the ProcessCase method, in the CaseProcessor class. I've did it with no problems with numerical data.
But when I load the MDB file on the Mining Structures Wizard, it says the content type of the field holding the texts is "Continous" and the data type is "Text". Actually, when I saw it I didn't really mind.
But when I run the mining model it gives me the following error: "Error 1 Error (Data mining): The data type of the Table1.Texto mining structure column must be numeric since it has a continuous content type (Content is set to Continuous or Key Time or Key Sequence). 0 0 "
So... How do I change this content type ? (the content type combobox on the Mining Structures Wizard couldn't the changed)
Can anyone help me on this, please ?
Thanks a lot.
We've successfully processed a large decision tree model in SQL Server 2005. When I try to view the tree in the mining model viewer, I get the following error:
TITLE: Microsoft Visual Studio
------------------------------
The tree graph cannot be created because of the following error:
'Exception of type 'System.OutOfMemoryException' was thrown.'.
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.42&EvtSrc=Microsoft.AnalysisServices.Viewers.SR&EvtID=ErrorCreateGraphFailed&LinkId=20476
The link provides no other documentaiton on the error.
We're using 64-bit SQL on a Dell Workstation running XP-64 with 16GB of memory. From my view of things we aren't close to running out of memory. Since the model processed and the error occurs when viewing the model, is this a problem with Visual Studio and nont necessarily Anlaysis Services?
Thanks in advance.
Nick
Hello:
I have a framework 2.0 winforms application that uses the data mining viewer controls. I upgraded the project to visual studio 2008 and compiled it under framework 2.0. It compiles fine, but when the form with the TimeSeriesViewer control loads, the application throws the following exception:
System.Reflection.TargetInvocationException was unhandled by user code
Message="Unable to get the window handle for the 'AxChartSpace' control. Windowless ActiveX controls are not supported."
Source="System.Windows.Forms"
StackTrace:
at System.Windows.Forms.AxHost.InPlaceActivate()
at System.Windows.Forms.AxHost.TransitionUpTo(Int32 state)
at System.Windows.Forms.AxHost.CreateHandle()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.AxHost.EndInit()
at Microsoft.AnalysisServices.Viewers.TimeSeriesViewer.InitializeComponent()
at Microsoft.AnalysisServices.Viewers.TimeSeriesViewer..ctor()
at RMS2.UI.DecisionSupport.ShowModel(String modelName, Int32 tabIndex) in C:UsersDougDocumentsRmsIIRmsIIRMS2.UIDecisionSupport.cs:line 72
at RMS2.UI.DecisionSupport.DecisionSupport_Load(Object sender, EventArgs e) in C:UsersDougDocumentsRmsIIRmsIIRMS2.UIDecisionSupport.cs:line 42
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
InnerException: System.AccessViolationException
Message="Attempted to read or write protected memory. This is often an indication that other memory is corrupt."
Source="System.Windows.Forms"
StackTrace:
at System.Windows.Forms.UnsafeNativeMethods.IOleObject.DoVerb(Int32 iVerb, IntPtr lpmsg, IOleClientSite pActiveSite, Int32 lindex, IntPtr hwndParent, COMRECT lprcPosRect)
at System.Windows.Forms.AxHost.DoVerb(Int32 verb)
at System.Windows.Forms.AxHost.InPlaceActivate()
InnerException:
The control is being added programatically, as in the wiinforms samples. Can anyone suggest a workaround? Thank you in advance.
- doug
I am trying to delete tables from data where the ModifiedDates older than 9 years in AdventureWorks2012 database . I get console notified that foreign keys are dropped but the delete statement is throwing errors. I am sure that somewhere the key constraints are not getting altered, but i'm not able to figure it out as i'm a relative beginner to T-SQL. The error and code:
The DELETE statement conflicted with the REFERENCE constraint "FK_SalesOrderHeaderSalesReason_SalesReason_SalesReasonID". The conflict
occurred in database "AdventureWorks2012", table "Sales.SalesOrderHeader
[System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SqlServer.SMO") | Out-Null
$option_drop = new-object Microsoft.SqlServer.Management.Smo.ScriptingOptions;
$option_drop.ScriptDrops = $true;
[Code] ....
Hi, all experts here,
I am wondering is there any way to select only a portion of a data set to train the mining model? In this case, I mean we dont need to split the dataset in advance, what I want to do is being able to select any random portion of a selected dataset to train a mining model. Any advices?
I am looking forward to hearing from you and thanks a lot in advance for your advices and help.
With best regards,
Yours sincerely,
hi
I am new at MSSQL 2000 DBA thing. and trying to learn more about analysis service/data warehouse/data mining. so is any expert out there can Recommend some good books or web link article to read? Thanks
Could I ask how to spit the data into training and validation sets when doing data mining?
Thanks
I'm stucked in a problem and I thought if you would be so kind as to helping me to resolve it.
I'm implementing a clustering algorithm plugin for text mining. I've already read the tutorials and sample codes provided by the MSDN Library.
Well... My problem is: I can't go through the data when the Predict method is called. I've read that this method implements the "core" of the custom algorithms. Here is a small snippet of my code for you to understand my doubt:
STDMETHODIMP ALGORITHM::Predict(/* [in] */ IDMContextServices* in_pContext,/* [in] */ DM_PREDICTION_FLAGS in_Flags,/* [in] */ IDMAttributeGroup* in_pPredAttGroup,/* [in] */ DM_CaseID in_CaseID, /* [in] */ ULONG in_ulCaseValues,/* [in] */ DM_ATTRIBUTE_VALUE* in_rgValues,/* [in] */ ULONG in_ulMaxPredictions,/* [in] */ ULONG in_ulMaxStates, /* [out] */ DM_ATTRIBUTE_STAT** io_prgPredictions,/* [out] */ ULONG* out_pulPredictions) {
for(UINT i=0;i<in_ulCaseValues;i++) {
DM_ATTRIBUTE_VALUE& dmattributevalue = in_rgValues;
ULONG iAttribute = dmattributevalue.Attribute;
if (iAttribute == DM_UNSPECIFIED)
continue;
double dblValue = ::DblContinuous(dmattributevalue.Value);
char buffer[129];
sprintf(buffer,"%f ",dblValue);
RENAN_Log::log(buffer);
}
return S_OK;
}
As you can see, I'm going through in_rgValues to get its values, but i'm only obtaining the first register of the table on the database. I need to roll over a kind of resultset so I could access all the registers I need. Is there any way to do so ?
I expected Predict() received a matrix containing all my data, but the only thing I noticed that could represent the data is that in_rgValues vector. So I can go through this vector, but it holds only the first register of the table in the database (that's what's being saved on my log). I need all of the registers in order to pre-process the data and implement my clustering algorithm.
Well... That's it... I would be very pleased if you could help me.
I have very little experience with programming and data mining, but I am working on a project where I need to take data from one spreadsheet and place it in another. Since it is hard to describe what I would like to do, I will provide an example:
SPREADSHEET 1
Column 1, Column 2
100, ?
101, ?
102, ?
103, ?
SPREADSHEET 2
Column 1, Column 2
102, 202
100, 200
103, 203
101, 201
In this example, the data in Column 1 is always tied to the data in Column 2 (i.e., 100 in Column 1 means 200 in Column 2, etc.) However, the data for Column 2 is only available in SPREADSHEET 2; moreover, the data is not in the same order in both spreadsheets.
My question is how can I create some sort of program where I can transfer the data from SPREADSHEET 2 into SPREADSHEET 1?
I get the following error when I try to load the mining model in the mining model viewer
Query (1, 6) The '[System].[Microsoft].[AnalysisServices].[System].[DataMining].[NeuralNet].[GetAttributeValues]' function does not exist.
I get a similar error when I try to load the Load Mining Accuracy Chart
Failed to execute the query due to the following error:
Query (1, 6) The '[System].[Microsoft].[AnalysisServices].[System].[DataMining].[AllOther].[GenerateLiftTableUsingDatasource]' function does not exist.
I have OWC 11 installed. What am I missing here?
Thanks
Hi my friends,
I do have a problem with results of clustering algorithm with my categorical data.
In reality I have a big table with one's and zero's and I try to cluster according to 60 attributes.
I tries to cluster to two categories many times but I get only one cluster. What do you suggest. Which values can I change to the algorithm? Is there anything particular for categorical data ?
Thank for your help in advance.
Manolis
Thank you very much for your previous answers conserning clustering algorithm.
I change a bit my data and now I can get two and three clusters as I wish.
But now I have a different question. I wish to keep my Structure and Model for further trials with different algorithm values, like cardinality. I tried the following
I selected in excel Data Mining and then the option cluster button.
Then in the cluster wizard I chose analysis service data source and I reform the query as I need adding only at the end
where "STAFF_YES" = 1. Then I choose the needed columns and target value. Finally I select browse model, enable drill through only and I finish the wizard and get some results, rather good. But i need to try again with different parameters.
I tried Business intelligent Studio to check my Analysis service. The structure were here but when I changed any parameter and I tried to reprocess I got the following messages
Processing Mining Structure 'try Structure_1' completed successfully.
Start time: 5/8/2007 4:55:08 μμ; End time: 5/8/2007 4:55:08 μμ; Duration: 0:00:00
Processing Dimension 'try Structure_1 ~MC-__RowIndex' completed successfully.
Start time: 5/8/2007 4:55:08 μμ; End time: 5/8/2007 4:55:08 μμ; Duration: 0:00:00
Processing Dimension Attribute '(All)' completed successfully.
Start time: 5/8/2007 4:55:08 μμ; End time: 5/8/2007 4:55:08 μμ; Duration: 0:00:00
Processing Dimension Attribute 'EPI_CELL_SINO_GOOD' completed successfully.
Start time: 5/8/2007 4:55:08 μμ; End time: 5/8/2007 4:55:08 μμ; Duration: 0:00:00
Processing Dimension Attribute 'EPI_CELL_SINO_LOOSE' completed successfully.
Start time: 5/8/2007 4:55:08 μμ; End time: 5/8/2007 4:55:08 μμ; Duration: 0:00:00
Errors and Warnings from Response
Internal error: The operation terminated unsuccessfully.
Internal error: The operation terminated unsuccessfully.
Internal error: An unexpected error occurred (file 'pcprocbinding.cpp', line 6645, function 'PCDBProcBinding:electOrChangeCartridge').
Errors in the OLAP storage engine: An error occurred while the dimension, with the ID of 'try Structure_1 ~MC-__RowIndex', Name of 'try Structure_1 ~MC-__RowIndex' was being processed.
Errors in the OLAP storage engine: An error occurred while the 'EPI_CELL_SINO_LOOSE' attribute of the 'try Structure_1 ~MC-__RowIndex' dimension from the 'DMAddinsDB2' database was being processed.
Internal error: The operation terminated unsuccessfully.
Internal error: The operation terminated unsuccessfully.
Internal error: An unexpected error occurred (file 'pcprocbinding.cpp', line 6645, function 'PCDBProcBinding:electOrChangeCartridge').
Errors in the OLAP storage engine: An error occurred while the dimension, with the ID of 'try Structure_1 ~MC-__RowIndex', Name of 'try Structure_1 ~MC-__RowIndex' was being processed.
Errors in the OLAP storage engine: An error occurred while the 'EPI_CELL_SINO_GOOD' attribute of the 'try Structure_1 ~MC-__RowIndex' dimension from the 'DMAddinsDB2' database was being processed.
And no change to the structure take place.
Please help me if you can
Thank you in advnce
Best regards.
Manolis
Dear friends,
I encounter a serious problem.
I would like to develop an application that can create Data Mining structures and a mining model in SQL Server 2005 with VB.NET. I tried the code from book Data Mining with SQL server 2005 in chapter 14 but did not work. Any good idea?
Please help me.
Best regards,
Manolis
Thank you very much for your help.
The errors that I can see in the code that you gave in your answer are the following and they are more or less the same as I had previously
I tried the code but initially I have encounter the following problems.
1. In any line that have the declaration As Server, As Database like in
Public Function CreateDatabase(ByVal srv As Server, ByVal databaseName As String) As Database gives me the problem that type Database is not declared the same type Server is not declared and it does not give me any option.
2. In addition to that for As DataSource, As RelationalDataSource, As RelationalDataSourceView, As ScalarMiningStructureColumn, As DataSourceViewBinding, gives me the problem that type is not declared.
3. Finally in mc = New MiningModelColumn("Yearly income", Utils.GetSyntacticallyValidID("Yearly income", Type.GetType(MiningModelColumn))) is not accesible in this context because it is 'Private'.
I have some more problems but I thing that by solving the above that I referred I will solve the rest.
Thank you any way.
Best regards,
Manolis
PhD student
Hi ,all here,
Thank you very much for your kind attention.
I just found that I am not able to view the accuracy chart for my mining model. The error message is: no mining models are selected for comparision. Which is quite strange.
Any guidance? thank you very much.
With best regards,
Yours sincerely,