What does this mean? I am building a package with a datareader task, derived column task, data conversion task, ans several ole db destinations.
Unable to cast COM object of type 'System.__ComObject' to interface type 'Microsoft.SqlServer.Dts.Pipeline.Wrapper.IDTSCustomProperty90'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{5A78E6D8-6AE0-4D2B-81C1-4B990840B717}' failed due to the following error: The application called an interface that was marshalled for a different thread. (Exception from HRESULT: 0x8001010E (RPC_E_WRONG_THREAD)).
When I push my SSIS packages up to my production server (which has a different data source than my developement environment) and I try to open the package on the production server, it takes forever for to validate all the steps of the SSIS package because it's trying to validate against a datasource that isnt there, so it just waits for each element it's validating to time out. This is exceptionally annoying.
Is there a way to turn off this validation 'feature'?
Visual Studio runs out of memory when trying to use SSIS package. I am trying to create and run a SSIS package that validates and imports some large xml files >200MB. Validation fails because Visual studio cannot open large files without running out of memory.
The SSIS package throws this error when I run the package..at the validation task.
Error: 0xC002F304 at Validate bio_fixed, XML Task: An error occurred with the following error message: "Exception of type 'System.OutOfMemoryException' was thrown.".
How do I increase the amount of RAM that VIsual Studio can use...I have plenty of RAM on my workstation >3GB, but VS chokes maybe around 100MB files?
While trying to build SSIS Package Project, the following error is thrown. I have added configuration file recently to fetch the dynamic values such as connection string, output path etc.
I tried manually cleaned up the debug folder and tried build but still the error occurs.
Can any one help in suppressing this error?
Error 1 System.ApplicationException: Could not copy file "D:ExportExport.dtsConfig" to the deployment utility output directory "D:ExportinDebug". ---> System.IO.IOException: The file 'D:ExportinDebugExport.dtsConfig' already exists. at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath) at System.IO.File.InternalCopy(String sourceFileName, String destFileName, Boolean overwrite) at Microsoft.DataTransformationServices.Project.DataTransformationsProjectBuilder.CopyFiles(ICollection fileNames, String outputPath) --- End of inner exception stack trace --- at Microsoft.DataTransformationServices.Project.DataTransformationsProjectBuilder.CopyFiles(ICollection fileNames, String outputPath) at Microsoft.DataTransformationServices.Project.DataTransformationsProjectBuilder.CreateDeploymentUtility(IOutputWindow outputWindow) 0 0
When running a package in VS you can see something like this in the output window:
SSIS package "logging.dtsx" starting. Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning. Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning. Information: 0x402090DC at Data Flow Task, Flat File Source [1]: The processing of file "C: est ssis loggingad_data1.txt" has started. Information: 0x4004300C at Data Flow Task, DTS.Pipeline: Execute phase is beginning. Warning: 0x8020200F at Data Flow Task, Flat File Source [1]: There is a partial row at the end of the file. Information: 0x402090DE at Data Flow Task, Flat File Source [1]: The total number of data rows processed for file "C: est ssis loggingad_data1.txt" is 477. Information: 0x402090DF at Data Flow Task, OLE DB Destination [1011]: The final commit for the data insertion has started. Information: 0x402090E0 at Data Flow Task, OLE DB Destination [1011]: The final commit for the data insertion has ended. Information: 0x40043008 at Data Flow Task, DTS.Pipeline: Post Execute phase is beginning. Information: 0x402090DD at Data Flow Task, Flat File Source [1]: The processing of file "C: est ssis loggingad_data1.txt" has ended. Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning. Information: 0x4004300B at Data Flow Task, DTS.Pipeline: "component "DataReaderDest" (87)" wrote 0 rows. Information: 0x4004300B at Data Flow Task, DTS.Pipeline: "component "OLE DB Destination" (1011)" wrote 1 rows. SSIS package "logging.dtsx" finished: Success.
This is exactly when I need when a package is running but I want to be able to see it without using Visual Studio. I would do it in Reporting Services but I need to find out to get the information. The SSIS logging feature in a package does not provide that kind of info.
I'm in a SSIS Package Design tab working on a data flow. It was working fine up to now, but all of a sudden I keep getting this error that says, "Microsoft Visual Studio has encountered a problem and needs to close." And it has that "Send Error Report" and "Don't Send" button at the bottom. This started happening when I tried to add a Data Viewer on a Data Flow Path. And now every time I do this to try to debug my data flow, it gives me this message and closes my project.
However, the package executes without any package errors, but I as I described above, I can't add a Data Viewer because it keeps giving me this message and closing my package.
Our project is on SSIS 2012 and we are using the project deployment model. We have parameter the connection managers, created environments, environment variables and configured the references. Hence, when we deploy the solution to higher environments, the connection strings are picked from the environments and not the ones stored in the connection manager.
However, we face issues when in development environment, we need to run the same package but by entering the values manually in the connection manager. Even though the connection details are correct, when we execute the package from Visual Studio, SSIS is not able to connect to the database. Is there any way to have SSIS prompt for the connection details after we have click on "Execute Task" or "Start" from Visual Studio?Â
I am working on a SSIS solution that has 4 packages. All 4 have run before and I have not modified any of them, however I keep getting the error message and it keeps locking up on one of my packages. Does anyone have any advice or a remedy for this?
Hi all, I am creating a dts package to export files from one database to another database. I tried to search for ways to execute the files and found out that i need to add reference to Microsoft.Sql.managedDts. However, I cannot find this reference from my reference. Do i have other alternatives to run this file?
I created SSIS Package to transfer tables from one sql2005 DB to another sql2005 DB. When I execute the package from the BIDS it execute succesfully. However, when I import the package (file system) to the management studio - msdb - stored packages and run the package from there (right click: Run Package) I get this error:
the validate method on the task failed, and returned error code. the validate method must succeed and indicate the result using an out parameter.
Hi all, Have tried running a dts package but Im unable to add the reference Microsoft.Sql.managedDts. Is there any other way that i can do tat from Visual studio code behind page? I need to let the user to trigger the package from the web application. Thks in advance.
I have three very simliar packages that I edited. I added an Exec SQL Task to truncate a table. These packages are not large or complex. When I simply try to open two out of the three packages, Visual Studio hangs and I get the balloon saying it's busy. I see in the bottom left hand corner, "Validating Load Phase". This never changes. My question is how can I get into this package? I hadn't yet checked it into SourceSafe If I even attempt to single click on any step in the package, it will hang. I've also had a co-worker attempt to open the packages on his computer, and he gets the same thing, so it's definitely the SSIS package. Any help would be appreciated!
As painful as it is proving out to be, I am trying to create a single package that is vendor neutral between SQL Server and Oracle.
At first, I thought that as long as I was going OLEDB in and out, and I ensured that my SQL syntax was generic enough, I'd be OK.
Well, not exactly. I am finding there is more to this. Specifically, metadata gets generated differently based on the source/targets.
For example, on an OLE DB Source task, datatypes will vary (i.e. NUMBER in Oracle vs Int in SQL). The job here is to pick the common denominator for the SSIS specific type. Time consuming, but doable, I think.
Another issue is on an OLE DB Desitnation. If you choose Table for Data Access Mode, this value gets written to the dtsx XML file. So, even when both RDBMS have the same schema (which is an obvious prereq) if choosing SQL Server "dbo.DimTable" will get written to the file and for Oracle "SCHEMA.DIMTABLE" will get written.
So, I am am wondering, what is the best way to address this?
My inital thought was using a dtsConfig file (which I am already using extensively) and set the target table names accordingly. This approach would have the added benefit of allowing for post-deployment configuration changes should a table name change, for example.
This section of the dtsx file shows the values of interest:
Code Snippet <component id="138" name="OLE_DST_DimTable" componentClassID="{E2568105-9550-4F71-A638-B7FE42E66922}" description="OLE DB Destination" localeId="-1" usesDispositions="true" validateExternalMetadata="True" version="4" pipelineVersion="0" contactInfo="OLE DB Destination;Microsoft Corporation;Microsoft SqlServer v9; (C) 2005 Microsoft Corporation; All Rights Reserved; http://www.microsoft.com/sql/support;4"> <properties> <property'>http://www.microsoft.com/sql/support;4">http://www.microsoft.com/sql/support;4"> <properties> <property id="139" name="CommandTimeout" dataType="System.Int32" state="default" isArray="false" description="The number of seconds before a command times out. A value of 0 indicates an infinite time-out." typeConverter="" UITypeEditor="" containsID="false" expressionType="None">0</property> <property id="140" name="OpenRowset" dataType="System.String" state="default" isArray="false" description="Specifies the name of the database object used to open a rowset." typeConverter="" UITypeEditor="" containsID="false" expressionType="None">"ORASCHEMA"."DIMTABLE"</property> <!-- More Properies --> </component>
Ideally, I'd like configuration time control over the name attribute of the component element (highlighted) so that I can set the value of the property element with the OpenRowset attribute type (also highlighted). This way, presumambly as long as datatypes were generic enough, the mapping would just work.
But, in walking through the dtsConfig tree, I don't see these elements or attributes exposed.
I would sincerely appreciate any suggestions on how to accomplish this.
We have a problem with visual studio. It hangs when i use the "execute package" option. New packages are running correctly but the packages which i've already built are not executing anymore...Any ideas to get things on track again?
I created a package via the import wizard in SQL Server Management Studio. When I test-ran the package I realised it needed to be modified. How do I do this without using either Visual Studio, SSIS Designer or an XML editor, none of which is installed where the package was created? Ideally I want to hear that there's a way of redisplaying the package in the import wizard.
I have a script that changes the name of a file after a data upload. The script works fine if I execute the package in Visual Studio but when I run the file package from a SQL server job it does not rename the file. The data does get uploaded it just does not run the final script.
I have a package that I was able to edit a week before. But now it is consuming all CPU memory (100%) and not letting me to edit the package (When I try to edit that it says Visual Studio Is busy even after an hour waiting).
Even though I have not changed anything, the package is behaving like this.
I have recently applied SQL Server 2005 SP1 to a dev machine, and my workstation, where it rpesumably updated Visual Studio. Since then I cannot open an SSIS package that contains some encrypted data, due to storing a database password. I get various error messages, and Visual Studio reports that it cannot load the package - I never get prompted for the password. My colleague who has not applied SP1 yet has no problem. Has anyone else encountered this problem, and if so do they have a solution ?
Errors below:
Error 1 Error loading 'Dim_Staff.dtsx' : The package failed to load due to error 0xC0010014 "One or more error occurred. There should be more specific errors preceding this one that explains the details of the errors. This message is used as a return value from functions that encounter errors.". This occurs when CPackage::LoadFromXML fails. . A:DevelopmentVisual Studio 2005Production_DeploymentSSIS_PackagesSales_DimensionsDim_Staff.dtsx 1 1
Error 2 Error loading Dim_Staff.dtsx: Failed to decrypt an encrypted XML node because the password was not specified or not correct. Package load will attempt to continue without the encrypted information. C:Dim_Staff.dtsx 1 1
Error 3 Error loading Dim_Staff.dtsx: Error loading value "<DTS:VariableValue xmlns:DTS="www.microsoft.com/SqlServer/Dts" DTS:DataType="7">12:00:00 a.m.</DTS:VariableValue>" from node "DTS:VariableValue". C:Dim_Staff.dtsx 1 1
Error 4 Error loading Dim_Staff.dtsx: Error loading value "<DTS:Variable xmlns:DTS="www.microsoft.com/SqlServer/Dts"><DTS:Property DTS:Name="Expression"></DTS:Property><DTS:Property DTS:Name="EvaluateAsExpression">0</DTS:Property><DTS:Property DTS:Name="Namespace">User</DTS:Property><DTS:Property DTS:Name="ReadOnl" from node "DTS:Variable". C:Dim_Staff.dtsx 1 1
Error 5 Error loading 'Dim_Staff.dtsx' : The package failed to load due to error 0xC0010014 "One or more error occurred. There should be more specific errors preceding this one that explains the details of the errors. This message is used as a return value from functions that encounter errors.". This occurs when CPackage::LoadFromXML fails. . C:Dim_Staff.dtsx 1 1
I am having a problem developing a SSIS package in Visual Studio and SQL Server 2005 Enterprise Edition.
Validation is happening after I have set ValidateExternalMetadata = FALSE causing and error
My package writes to a SQL Server table with a handfull of rows and columns using OLE DB destination.
One of the columns in the table is a 'NOT NULL' data type.
I have a trigger on the table handling any null condition. (see below)
(I know the trigger works because I have tested it by inserting rows manualy within SQL Server Mgnt Studio)
When I €œExecute Package€? (DEBUG) my data flows through till the OLE DB destination, which turns red, errors out, and does not attempt to write the data !!! !!!
Ideas, suggestions ??
My next step is to develop a work around so that Visual Studio and SQL Server 2005 Enterprise Edition SSIS will write the data and not error out.
Thanks
Trigger: CREATE TRIGGER [dbo].[dim_ins] ON [dbo].[rollup_dim] AFTER INSERT AS BEGIN update rollup_dim set str_link_id = str_id where str_link_id is null; END
I have an SSIS package that when run from Visual Studio takes 1 minute or less to complete. When I schedule this package to run as a SQL Server job it takes 5+ and sometimes hangs complaining about buffers.
The server is a 4 way 3ghz Xeon (dual core) with 8GB ram and this was the only package running.
When I look in the log I see that the package is running and processing data, although very very very very very slowly.
I have a personal project that performances analytics on a SQL Server (express) Db thru SSMS. I connect via an ODBC to SQL Server and create Access 2013 queries and reports of web traffic to my Web portal. The source data is from Google Analytics of various webpages, which I import to SQL Server and link to the Access Db.
I wanted to automate some of the manual extractions thru SSIS with a package that would pull in the Xcel sheets from SQL Server (or even Access). I started SQL Data Tools (SSDT) and here is my problem. When I attempt to open Package.dtsx I have an error that indicates SSDT must be installed on one of several SQL Server installation. Mine is Evaluation which I have and SSDT is installed in it.
I used SSDT to open Visual Studio 2010 and then it indicates I must have SSDT in SQL Server 2012.
Apparently I have to run SQL Server Setup and install SSDT in it. But, I don't have a setup of this type. Or at least I have not found it by searching my Windows 8.1 machine. This seems like a very elementary problem that can be fixed by a MSDN download or some pointer to where I need to go to install SSDT within SQL Server 2012.
I have recently installed Visual Studio 2008 Beta 2 on a development machine that was running SQL Server 2005 SP2a without any issues. Not I find that I can no longer run any of my SSIS packages and I keep getting the following error:
Retrieving the COM class factory for component with CLSID {7816B7A3-CD60-4539-BD38-C35AFC61F200} failed due to the following error: 80040154
Per other posts, I have reinstalled MSXML 3.0 to no avail and I have looked for every SQL Server patch I can find - I appear to have all of the latest patches for SQL Server.
I installed Visual Studio 2008 Beta 2 Professional yesterday and now none of my SSIS packages will function. Each time I attempt to run the transform, I obtain the folloiwing error:
Retrieving the COM class factory for component with CLSID {7816B7A3-CD60-4539-BD38-C35AFC61F200} failed due to the following error: 80040154.
I have tried to apply every patch I can find for SQL Server 2005 - inclduing both the SP2 and SP2a patches. I have tried reinstalling MSXML 3.0 - nothing seems to work.
I can't open solutions created in Visual Studio 2005 in Visual Studio 2008
--------------------------- Microsoft Visual Studio --------------------------- 'TransformFoxData.dtproj' cannot be opened because its project type (.dtproj) is not supported by this version of Visual Studio.
To open it, please use a version that supports this type of project. --------------------------- OK Help --------------------------- Does that mean it is a requirement to have SQL Server 2008 installed ( which I don't want ) to make it work in Visual Studion 2008. I just uninstalled VS 2005.
I have created one Custom Task in SSIS. Basically I have one solution and 2 class library project one for Task and one for UserInterface when i try to drag new task from tool box it says following errror =================================== Failed to create the task. (Microsoft Visual Studio) =================================== The task editor of the type 'CustomErrorControl.CustomControlnew,CustomErrorControl,Version=1.0.0.0,Culture=Neutral,PublicKeyToken= 0c2b681d5171851e' is not installed correctly. (Microsoft.DataTransformationServices.Design) ------------------------------ For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.762&EvtSrc=Microsoft.DataTransformationServices.Design.SR&EvtID=TaskEditorNotProperlyInstalled&LinkId=20476 ------------------------------ Program Location: at Microsoft.DataTransformationServices.Design.DtrTaskDesigner.InitializeTaskUI() at Microsoft.DataTransformationServices.Design.DtrTaskDesigner.OnNewTaskAdded() at Microsoft.DataTransformationServices.Design.DtsBasePackageDesigner.CreateExecutable(String moniker, IDTSSequence container, String name)
CustomErrorControl is my name space and CustomControlNew is my class name. does it TypeName should appear like what i have? I have unstalled it and try to reinstall it. change the stong name key and they try again but somehow same error.. Please help..
My home machine has sql 2005 and Visual Studio 2005 installed. I uninstalled VS 2005 (RTM) and installed VS 2008 (RTM) in its place. I then found that the SSIS templates were missing. Lesson: don't uninstall VS 2005 if you want to use SSIS 2005!
1. Is there any "workaround" to this issue?
2. (If the answer to 1 is "No") I will install VS 2008 side-by-side with VS 2005 on the same box. When the SSIS issue is finally resolved, can I uninstall VS 2005 without doing damage to the VS 2008 install?
I created an ODBC to Lotus notes server and database. Â This ODBC connection works, however, when I put the ODBC into SSIS and test the connection my visual studio 2010 crashes and has to restart. Â Is there a fix I am missing on my VS2010? Â Or am I doing something wrong in my SSIS project?
We have found that it is common for Visual Studio 2005 to crash when editing or running SSIS packages -- from CTP versions through beta versions and including the release version.
Of course we kept hoping that newer releases would become more stable, or at least more robust -- and now I'm hoping there will be a service pack, which might make it more robust?
