I had earlier installation of microsoft sql server 2005 in my machine. Recently I installed the visual studio 2005 beta which comes with sql express and after going through many hoops(as it kept complaining about the previous installation of beta components) i was able to install it correctly. I was also able to also use visaul studio 2005 server explorer to connect to the SQLEXPRESS and create table etc... Now I wanted to install sql server management express so I downloaded SQLEXPR_ADV from te microsoft's website. During the installation it complained about the older version of SQL server management sutdio installed and hence could not install the sql server management express. By looking at different forums I found following steps to deinstall earlier version but still runs into this issue. I will really appreciate somebody's help....
STPES I FOLLOWED TO REMOVE EARLIER VERSION OF SQL SERVER 2005 MANAGEMENT STUDIO
Click Start, and then click Control Panel.
Double-click Add or Remove Programs.
In the list of installed programs, click Microsoft SQL Server 2005, and then click Change.
On the Component Selection page, select Workstation components, and then click Next.
Click Next.
On the Change or Remove Instance page, click Change Installed Components.
Expand Client Components, click Management Tools, and then select Entire Feature will be Unavailable. Or just select the entire client components
Click Next.
Click Install.
2) I also tried to use the complete uninstall of visual studio ( By using the tolls
vs_unists_betas.exe) and after that also window uninstall clean up (msiccu2)
and then reinstalling visual studio 2005 beta which would install sql express...But
nothing seems to be able to uninstall the previous version of SQL SERVER 2005
Management studio from my computer and hence I am not able to uninstall the
Hi, I'm still getting error 2908 while installing the SQL Server Management Studio Express. The file downloads, I run it and it goes through the setup wizard. It gets almost all the way through the installation and then gets this error. The complete message is 'The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2908. The install then rolls back. Any suggestions?
Product: Microsoft SQL Server Management Studio Express -- The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2908. The arguments are: {2AC4F9E9-0BFA-4CAC-BA2E-D089C63637F5}, ,
Product: Microsoft SQL Server Management Studio Express -- Error 1935. An error occurred during the installation of assembly 'Microsoft.ReportViewer.WebForms,Version="8.0.0.0",Culture="neutral",PublicKeyToken="b03f5f7f11d50a3a",FileVersion="8.0.50727.42",ProcessorArchitecture="MSIL"'. Please refer to Help and Support for more information. HRESULT: 0x8002802F. assembly interface: , function: CreateAssemblyNameObject, component: {B68B643F-A989-4510-9D98-0B2385E85ADF}
Hi, I'm getting error 2908 while installing the SQL Server Management Studio Express. The file downloads, I run it and it goes through the setup wizard. It gets almost all the way through the installation and then gets this error. The complete message is 'The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2908. The install then rolls back. Any suggestions?
Here's the errors that are getting generated in the application log
Product: Microsoft SQL Server Management Studio Express -- Error 1935. An error occurred during the installation of assembly 'Microsoft.ReportViewer.WebForms,Version="8.0.0.0",Culture="neutral",PublicKeyToken="b03f5f7f11d50a3a",FileVersion="8.0.50727.42",ProcessorArchitecture="MSIL"'. Please refer to Help and Support for more information. HRESULT: 0x8002802F. assembly interface: , function: CreateAssemblyNameObject, component: {B68B643F-A989-4510-9D98-0B2385E85ADF}
Product: Microsoft SQL Server Management Studio Express -- The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2908. The arguments are: {2AC4F9E9-0BFA-4CAC-BA2E-D089C63637F5}, ,
I am trying to install "Microsoft SQL Server 2005 Express Edition" through VS2005 Setup but it is always failing to install. I am presenting here log file information.I appriciate if any one help me on this..I have marked all failed message with red color
Microsoft SQL Server 2005 9.00.1399.06 ============================== OS Version : Microsoft Windows XP Professional Service Pack 2 (Build 2600) Time : Wed Dec 20 15:04:57 2006
Machine : DATLA Product : Microsoft SQL Server Setup Support Files (English) Product Version : 9.00.1399.06 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SQLSupport_1.log -------------------------------------------------------------------------------- Machine : DATLA Product : Microsoft SQL Server Native Client Product Version : 9.00.1399.06 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SQLNCLI_1.log -------------------------------------------------------------------------------- Machine : DATLA Product : Microsoft SQL Server VSS Writer Product Version : 9.00.1399.06 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SqlWriter_1.log -------------------------------------------------------------------------------- Machine : DATLA Product : MSXML 6.0 Parser Product Version : 6.00.3883.8 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_MSXML6_1.log -------------------------------------------------------------------------------- Machine : DATLA Product : Microsoft SQL Server Setup Support Files (English) Product Version : 9.00.1399.06 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SQLSupport_2.log -------------------------------------------------------------------------------- Machine : DATLA Product : Microsoft SQL Server Native Client Product Version : 9.00.1399.06 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SQLNCLI_2.log -------------------------------------------------------------------------------- Machine : DATLA Product : MSXML 6.0 Parser Product Version : 6.00.3883.8 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_MSXML6_2.log -------------------------------------------------------------------------------- Machine : DATLA Product : SQL Server Database Services Error : Failed to set registry settings for server network libraries. The action is SetDefaults. The error is 111 (The file name is too long. ) -------------------------------------------------------------------------------- Machine : DATLA Product : SQL Server Database Services Error : Failed to set registry settings for server network libraries. The action is SetDefaults. The error is 111 (The file name is too long. ) -------------------------------------------------------------------------------- Machine : DATLA Product : Microsoft SQL Server 2005 Express Edition Product Version : 9.00.1399.06 Install : Failed Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SQL.log Last Action : InstallFinalize Error String : Failed to set registry settings for server network libraries. The action is SetDefaults. The error is 111 (The file name is too long. Error Number : 29530 -------------------------------------------------------------------------------- Machine : DATLA Product : Microsoft SQL Server 2005 Tools Express Edition Product Version : 9.00.1399.06 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_Tools.log --------------------------------------------------------------------------------
SQL Server Setup failed. For more information, review the Setup log file in %ProgramFiles%Microsoft SQL Server90Setup BootstrapLOGSummary.txt.
I have tried to install sql express several times and each time it fails to start the sql service during the install process. I am copying part of the three log files below.
File Name :C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_REHMANK-PC_Core.log
Running: ActivateLoggingAction at: 2006/11/11 13:33:57 Complete: ActivateLoggingAction at: 2006/11/11 13:33:57, returned true Running: DetectPatchedBootstrapAction at: 2006/11/11 13:33:57 Complete: DetectPatchedBootstrapAction at: 2006/11/11 13:33:57, returned true Action "LaunchPatchedBootstrapAction" will be skipped due to the following restrictions: Condition "EventCondition: __STP_LaunchPatchedBootstrap__2836" returned false. Running: PerformSCCAction2 at: 2006/11/11 13:33:57 Loaded DLL:C:WINDOWSsystem32msi.dll Version:3.1.4000.2435 Loaded DLL:C:WINDOWSsystem32msi.dll Version:3.1.4000.2435 Complete: PerformSCCAction2 at: 2006/11/11 13:33:57, returned true Running: PerformDotNetCheck at: 2006/11/11 13:33:57 Complete: PerformDotNetCheck at: 2006/11/11 13:33:58, returned true Running: ComponentUpdateAction at: 2006/11/11 13:33:58 Complete: ComponentUpdateAction at: 2006/11/11 13:46:49, returned true Running: DetectLocalBootstrapAction at: 2006/11/11 13:46:49 Complete: DetectLocalBootstrapAction at: 2006/11/11 13:46:49, returned true Running: LaunchLocalBootstrapAction at: 2006/11/11 13:46:49 Error: Action "LaunchLocalBootstrapAction" threw an exception during execution. Error information reported during run: "c:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe" finished and returned: 1067 Aborting queue processing as nested installer has completed Message pump returning: 1067
File Name :C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_REHMANK-PC_SQL.log
Property(S): SOURCEDIR = c:2047371f3917d7caabSetup Property(S): SourcedirProduct = {2AFFFDD7-ED85-4A90-8C52-5DA9EBDC9B8F} Property(S): InstallNgenTicks = 100000 Property(S): SQLBROWSERSCMACCOUNT = NT AUTHORITYNetworkService Property(S): SQLSCMACCOUNT = NT AUTHORITYNetworkService Property(S): DebugClsid.CC1A8C58_27D1_4D38_BF1B_C0A5CBB90616 = {AE0605D0-EBAD-411B-B292-2975E83A76D2} Property(S): ProductToBeRegistered = 1 MSI (s) (F0:04) [13:53:09:168]: Note: 1: 1708 MSI (s) (F0:04) [13:53:09:168]: Product: Microsoft SQL Server 2005 Express Edition -- Installation failed.
MSI (s) (F0:04) [13:53:09:184]: Cleaning up uninstalled install packages, if any exist MSI (s) (F0:04) [13:53:09:184]: MainEngineThread is returning 1603
2006-12-11 13:52:02.59 Server Command Line Startup Parameters: 2006-12-11 13:52:02.59 Server -m SqlSetup 2006-12-11 13:52:02.59 Server SqlSetup 2006-12-11 13:52:02.59 Server -Q 2006-12-11 13:52:02.59 Server -q SQL_Latin1_General_CP1_CI_AS 2006-12-11 13:52:02.59 Server -T 4022 2006-12-11 13:52:02.59 Server -T 3659 2006-12-11 13:52:02.59 Server -T 3610 2006-12-11 13:52:02.59 Server -T 4010 2006-12-11 13:52:02.89 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required. 2006-12-11 13:52:02.89 Server Detected 1 CPUs. This is an informational message; no user action is required. 2006-12-11 13:52:03.86 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required. 2006-12-11 13:52:05.11 Server Database Mirroring Transport is disabled in the endpoint configuration. 2006-12-11 13:52:05.26 spid5s Warning ****************** 2006-12-11 13:52:05.28 spid5s SQL Server started in single-user mode. This an informational message only. No user action is required. 2006-12-11 13:52:05.54 spid5s Starting up database 'master'. 2006-12-11 13:52:06.03 spid5s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required. 2006-12-11 13:52:06.76 spid5s SQL Trace ID 1 was started by login "sa". 2006-12-11 13:52:06.90 spid5s Starting up database 'mssqlsystemresource'. 2006-12-11 13:52:06.97 spid5s The resource database build version is 9.00.3027. This is an informational message only. No user action is required. 2006-12-11 13:52:14.15 spid5s Error: 15209, Severity: 16, State: 1. 2006-12-11 13:52:14.15 spid5s An error occurred during encryption. 2006-12-11 13:52:14.26 spid5s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
I searched the forum but could not find any solution. Can anyone help, please.
TITLE: Microsoft SQL Server 2005 Setup------------------------------ The SQL Server System Configuration Checker cannot be executed due to WMI configuration on the machine EXSOTECH1 Error:2147746132 (0x80040154). any ideas? i'm running SQL 2000 on the same system. do i need to uninstall first or can they co-exist.
When I open the installation, everything is fine. The report says that I do not meet the reccomended hardware requirements, but I checked and I am above the minimum requirements. This is the report:
System Configuration Check
- WMI Service Requirement (Success)
Messages
WMI Service Requirement
Check Passed
- MSXML Requirement (Success)
Messages
MSXML Requirement
Check Passed
- Operating System Minimum Level Requirement (Success)
Messages
Operating System Minimum Level Requirement
Check Passed
- Operating System Service Pack Level Requirement. (Success)
Messages
Operating System Service Pack Level Requirement.
Check Passed
- SQL Server Edition Operating System Compatibility (Success)
Messages
SQL Server Edition Operating System Compatibility
Check Passed
- Minimum Hardware Requirement (Warning)
Messages
Minimum Hardware Requirement
The current system does not meet the recommended hardware requirements for this SQL Server release. For detailed hardware and software requirements, see the readme file or SQL Server Books Online.
- ASP.Net Version Registration Requirement (Success)
Messages
ASP.Net Version Registration Requirement
Check Passed
- Minimum MDAC Version Requirement (Success)
Messages
Minimum MDAC Version Requirement
Check Passed
- Edition Change Check (Success)
Messages
Edition Change Check
Check Passed
Then the installation seems to work fine until it tries to install the native client. then it shows a message box saying: "An installation package for the product Microsoft SQL Server Native Client cannot be found. try the installation again using a valid copy of the installation package 'sqlncli.msi'." Everything else completes except for that and the database services. This is the summary log:
Microsoft SQL Server 2005 9.00.2047.00 ============================== OS Version : Microsoft Windows XP Home Edition Service Pack 2 (Build 2600) Time : Sat Aug 19 11:43:01 2006
HUNTERXMAS05 : The current system does not meet recommended hardware requirements for this SQL Server release. For detailed hardware requirements, see the readme file or SQL Server Books Online. Machine : HUNTERXMAS05 Product : Microsoft SQL Server Setup Support Files (English) Product Version : 9.00.2047.00 Install : Successful Log File : c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0005_HUNTERXMAS05_SQLSupport_1.log -------------------------------------------------------------------------------- Machine : HUNTERXMAS05 Product : SQL Native Client Error : An installation package for the product Microsoft SQL Server Native Client cannot be found. Try the installation again using a valid copy of the installation package 'sqlncli.msi'. -------------------------------------------------------------------------------- Machine : HUNTERXMAS05 Product : Microsoft SQL Server Native Client Product Version : 9.00.2047.00 Install : Failed Log File : c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0005_HUNTERXMAS05_SQLNCLI_1.log Last Action : InstallFinalize Error String : An installation package for the product Microsoft SQL Server Native Client cannot be found. Try the installation again using a valid copy of the installation package 'sqlncli.msi'. Error Number : 1706 -------------------------------------------------------------------------------- Machine : HUNTERXMAS05 Product : Microsoft SQL Server VSS Writer Product Version : 9.00.2047.00 Install : Successful Log File : c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0005_HUNTERXMAS05_SqlWriter_1.log -------------------------------------------------------------------------------- Machine : HUNTERXMAS05 Product : MSXML 6.0 Parser Product Version : 6.00.3883.8 Install : Successful Log File : c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0005_HUNTERXMAS05_MSXML6_1.log --------------------------------------------------------------------------------
Please help..... During an installation of SQL 2005 express, I receive the error message:
- Minimum MDAC Version Requirement (Error)
Messages
Minimum MDAC Version Requirement
The system does not have the required version of Microsoft Data Access Components (MDAC) for this SQL Server release. For details, see Hardware and Software Requirements for Installing SQL Server 2005 in Microsoft SQL Server Books Online.
But when I look in the "Add or remove programs" an instance of "hotfix MDAC" exists.
I must install SQL 2005 to run an application of CAD/CAM. It's being installed on a system running win2k
I downloaded SQL Server Express 2005 SP2 from Microsoft site. I tried to install it but I get this error message: An Installation package for the product Microsoft SQL Server Native Client cannot be found. Try the installation again using a valid copy of the isntallation package 'sqlncli.msi'
What does this mean...can someone tell me where I can get a working copy of the SQL Server Express. I am installing it on tha WindowsXP laptop
I have had SQL express installed and working ok, however, I can no longer connect
OS: XP sp2.0
.net installed ver1.1 .. 2.0 sp1, 3.0sp1 and 3.5
The install of SQL was using the SQLEXR_adv download
I have removed SQL and all associated applications folders and windows SQL services
I have re-installed many times but always receive the same issue.
I re-built the .net 2.0
The issue I have is when I try and connect form my applications or with Express sql management studio I receive the following error:
It looks like a .net2.0 issue
TITLE: Connect to Server ------------------------------ Cannot connect to RNASHLTOPSQLEXPRESS. ------------------------------ ADDITIONAL INFORMATION: The type initializer for 'System.Data.SqlClient.SqlConnection' threw an exception. (System.Data) ------------------------------ The type initializer for 'System.Data.SqlClient.SqlConnectionFactory' threw an exception. (System.Data) ------------------------------ The type initializer for 'System.Data.SqlClient.SqlPerformanceCounters' threw an exception. (System.Data) ------------------------------ Configuration system failed to initialize (System.Configuration) ------------------------------ Unrecognized configuration section system.serviceModel. (C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Configmachine.config line 136) (System.Configuration) ------------------------------ BUTTONS: OK ------------------------------
I'm trying to run the disk usage reports from the SQL Server Management Studio and I'm getting an error. I right-click on a database, go to Reports, then Standard Reports and select Disk Usage by Table. I get the error below. Can anyone help?
===================================
Object reference not set to an instance of an object. (System.Xml)
------------------------------ Program Location:
at System.Xml.XmlReader.CalcBufferSize(Stream input) at System.Xml.XmlTextReaderImpl.InitStreamInput(Uri baseUri, String baseUriStr, Stream stream, Byte[] bytes, Int32 byteCount, Encoding encoding) at System.Xml.XmlTextReaderImpl..ctor(String url, Stream input, XmlNameTable nt) at System.Xml.XmlDocument.Load(Stream inStream) at Microsoft.SqlServer.Management.Reports.StandardReport.LoadRdlDocument() at Microsoft.SqlServer.Management.Reports.Report.LoadReportQueriesFromRdl() at Microsoft.SqlServer.Management.Reports.StandardReportFactory.GetReport(ReportInfo reportInfo, ReportContext context) at Microsoft.SqlServer.Management.Reports.ReportsManager.GetReport(ReportInfo reportInfo, ReportContext context) at Microsoft.SqlServer.Management.Reports.ReportsManager.ShowReport(ReportInfo reportInfo)
I am having an installation error for SQL Server Express SP2 installation: 2259. I have no idea how to fix it. The error log is given below. Please help.
Thank you
Microsoft SQL Server 2005 9.00.3042.00 ============================== OS Version : Professional (Build 6000) Time : Wed Jun 13 11:50:09 2007
Microsoft SQL Server 2005 9.00.3042.00 ============================== OS Version : Professional (Build 6000) Time : Wed Jun 13 11:50:09 2007
Computer-2 : Microsoft Internet Information Services (IIS) is either not installed or is disabled. IIS is required by some SQL Server features. Without IIS, some SQL Server features will not be available for installation. To install all SQL Server features, install IIS from Add or Remove Programs in Control Panel or enable the IIS service through the Control Panel if it is already installed, and then run SQL Server Setup again. For a list of features that depend on IIS, see Features Supported by Editions of SQL Server in Books Online. Machine : Computer-2 Product : Microsoft SQL Server Setup Support Files (English) Product Version : 9.00.3042.00 Install : Successful Log File : c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0007_Computer-2_SQLSupport_1.log -------------------------------------------------------------------------------- Machine : Computer-2 Product : Microsoft SQL Server Native Client Product Version : 9.00.3042.00 Install : Successful Log File : c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0007_Computer-2_SQLNCLI_1.log -------------------------------------------------------------------------------- Machine : Computer-2 Product : Microsoft SQL Server VSS Writer Product Version : 9.00.3042.00 Install : Successful Log File : c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0007_Computer-2_SqlWriter_1.log -------------------------------------------------------------------------------- Machine : Computer-2 Product : SQL Server Database Services Error : The installer has encountered an unexpected error. The error code is 2259. Database: Table(s) Update failed -------------------------------------------------------------------------------- Machine : Computer-2 Product : Microsoft SQL Server 2005 Product Version : 9.2.3042.00 Install : Failed Log File : c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0007_Computer-2_SQL.log Last Action : ValidateUpgrade Error String : The installer has encountered an unexpected error. The error code is 2259. Database: Table(s) Update failed Error Number : 2259 --------------------------------------------------------------------------------
When launching Microsfot SQL Server Management Studio Express, I get a Popup Error box (!) without any text. After pressing the OK button, everything seems to work fine. Any ideas as to what it's trying to tell me?
Yesterday I successfully installed Microsoft Visual Basic 2005 Express Edition which included SQL Server 2005 Express. Today I noticed I needed to download the Management Studio seperate download. I downloaded SQLServer2005_SSMSEE.msi and executed it and get the following error:
Error reading from file C:...SQLServer2005_SSMSEE.msi. Verify that the file exists and that you can access it..
Solved my own problem. Once I moved the msi to C: the installation worked. Apparently the path it was in was too long causing it to be unreadable. c:xxxxxxxxSQLServer2005_SSMSEE.msiSQLServer2005_SSMSEE.msi.
tried to attach a database in sse-ms, and for some reason the database name is changing to G:someFoldersomeFolderdb.mdf, even tho i dont have a drive g:,
during "attach as" screens inside sse-ms, , ie attach>add> then select the database the mdf loction is what it is suppose to be ie C:inetpubwwwrootapp_datachp11wroxunited.mdf but the database name in the same screen shot is G:someOtherFolderAndPathwroxunited.mdf and the attach as is also the G:someOtherFolderAndPathwroxunited.mdf.
Miscrosoft SQL Server Management Studio Express (SQLServer2005_SSMEE.msi) don't complete setup on Windows Vista Beta 2 with Sql Server 2005 Express installed.
Error Code 29506. C:Program FilesMicrosoft SQL server\90Tools, Alberto
We deploy an application that uses SQL Server Express 2005. One of our test engineers tried to use our setup on Windows XP SP 3. But the SQL server installer gave an error - unable to update msxml6r.dll. Is this a bug of the SQL Server installer or do we need to make use of a more recent version of msxml6?
After installing SQL Server 2005 Express Edition on Windows Vista RC1, I wanted to install also the Managent Studio but I always receive the following error message:
"Bei der Installation dieses Pakets ist ein unerwarteter Fehler aufgetreten. Es liegt eventuell ein das Paket betreffendes Problem vor. Der Fehlercode ist 29506."
Where can I find more infos about this error-code?
Hello.. When I used Microsoft SQL Server 2005 Management Studio Express to Create FULL TEXT INDEX by this code:
CREATE FULLTEXT INDEX ON txtfilestbl(txtfile) KEY INDEX PK_txtfilestbl ON ForumsArchiveLibCtlg WITH CHANGE_TRACKING AUTO
It returns this ERR MSG:
Informational: No full-text supported languages found. Informational: No full-text supported languages found. Msg 7680, Level 16, State 1, Line 1 Default full-text index language is not a language supported by full-text search.
I Use same this code to create FULL TEXT INDEX by using Microsoft SQL Server 2005 Management Studio, and it was working properly. What I have to do?
I have SQL Express 2005 SP2 installed in my Vista Home Premium. I am using SQL Server Management Studio Express to manage .mdf.
When I click "Add..." to attach .mdf database, I have this prompt error message :
The server principal "My-PCMyName" is not able to access the database "model" under the current security context. (Microsoft SQL Server, Error: 916)
I have elevated the rights, "Run as administrator", of my SQL Server Management Studio Express, but still having problem.
I also encounter security error when detaching the existing .mdf : The EXECUTE permission was denied on the object 'sp_detach_db', database 'mssqlsystemresource', schema 'sys'. (Microsoft SQL Server, Error: 229)
I get an error when trying to install the SQL Native Client. It says it cannot find the installation package and to use a valid copy of 'sqlncli.msi'. I've downloaded the Express setup twice and get the same error from both of them.
I'm attempting this in a VMWare session setup for Windows 2K, Advanced Server. I am trying to test my installation and setup procedures. This is not a production setup, just install testing and documentation. I have allocated only 272MB to the VMWare session, which is why the system doesn't meet the recommended settings.
Any help would be greatly appreciated.
Below is the Summary.txt output file.
Microsoft SQL Server 2005 9.00.2047.00
==============================
OS Version : Microsoft Windows 2000 Advanced Server Service Pack 4 (Build 2195)
Time : Wed May 03 09:54:23 2006
CPCWIN2KVM1 : The current system does not meet recommended hardware requirements for this SQL Server release. For detailed hardware requirements, see the readme file or SQL Server Books Online.
Machine : CPCWIN2KVM1
Product : Microsoft SQL Server Setup Support Files (English)
Error : An installation package for the product Microsoft SQL Server Native Client cannot be found. Try the installation again using a valid copy of the installation package 'sqlncli.msi'.
Error String : An installation package for the product Microsoft SQL Server Native Client cannot be found. Try the installation again using a valid copy of the installation package 'sqlncli.msi'.
Iam running sql sever 2005 express with advanced services but when i try to launch sql sever management studio express, i get the following message message and i have no idea why. unhandled exception has occurred in a component in your application. If you click continue the application will ignore the this error and attempt to continue . Can not create a stable key under a volatile parent key.
I have recently installed the SQL Server Management Studio Express but I do not find Management Tools in order to create scheduled backups and shrinking of the databases. I was under the impression that this should be included in the Management Studio. I use the SQL 2005 Express for smaller customers who run the SQL on a desktop unit. I need a way to backup the data to a server machine for backup purposes. I have uninstalled and reinstalled to no avail.
I am trying to connect to a remote sql server 2005. So I have install the Microsoft SQL Server Management Studio Express. When I try to connect I get the error below.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53). Can some one please help. I have even port no 1533 on my pc. Thanks.
I just installed SQL Server Developer 2005 but Management Studio is not available in the Start menu. Can someone tell me how to install it? Can someone tell me what I did wrong in the installastion?
The 6:th of march Sql server data tools for Visual Studio 2012 was released.
[URL]
I seem to be unable to install this using the link provided on the blog page. I'm getting a "Same architecture installation" error. Running on the machine is Visual Studio 2012 Premium & Sql Server 2012 (64bit).
I am trying to install SQL Server 2000 on a Win2K OS machine but Iget this error message:"A previous program installation created pending file operations onthe installation machine. You must restart the computer before runningsetup."I see others have had this problem but have fixed it using the solutionin:http://support.microsoft.com/defaul...kb;en-us;312995I have tried the solution but to no avail. The registry key:HKEY_LOCAL_MACHINESYSTEMCurrentControlSetContro lSessionManagerPendingFileRenameOperations keeps reappearing as soon as Iclose RegEdit.Any ideas?Thanks,lq
When I downloaded/started using Visual Web Developer I was under the impression that I needed to install SQL Server Management Studio Express in order to create/manage databases, and to provide the engine to access the data. Since then I have found tutorials and have successfully created/used databases solely from within Visual Web Developer. I'm assuming that Visual Web Developer includes a database engine, much like the webserver that is included. (This is an awesome thing). When I tried to upload my web application with database to my production server, the database would not work, it started working after I installed SQL Server Management Studio Express on the server. Is it my understanding that you need SQL Server Management Studio Express if you do not have Visual Web Developer Express installed in order to provide the data access engine? Also, I am unable to "attach" my Visual Web Developer Express created database to SQL Server Management Studio Express. Are there any posts that provide more information about this topic?
The only reason I'm asking is that I have extra whitespace on the end of my text fields, and I thought ANSI_PADDING was turned on. I do not see the option in Visual Web Developer Express, but have found it in SQL Server Management Studio Express.
