Error On Associative Rules Viewer
Dec 18, 2006
Hello,
I don't know if this is the correct forum or if it would perhaps be the server setup & upgrade, however, I'll ask here first. I am going through the SQL 2005 data mining tutorials and have encountered an error that states:
Query (1,6) The '[System].[Microsoft].[AnalysisServices].[System].[DataMining].[AssociationRules].[GetStatistics]' function does not exist.
After looking around for a bit it appeared that this function is generally used in a stored procedure run from the server. Is this correct? What do I need to do to either correctly import the function into the project or to make sure that it is installed on the server?
We are running the Ent Ed. now, however, we just upgraded to this after I had already started on this project. Could that be a problem?
Any help on this would be greatly appreciated.
Thanks for your time.
Eric Wisdahl
View 3 Replies
ADVERTISEMENT
Dec 4, 2007
Hello Everyone. I am a newbie to data mining. I hope that you can help.
I have run the same data mining query against the Decision Tree, Logistical Regession, Neural Network and Assocation Rules mining models. I created seperate tables to contain the results of each of these models. All of the tables have the same structure. The structure is a col#1 with a bigint datatype and col#2 with a numeric(5,5) datatype. All of the models have been successful with outputing the data to their respective tables except the Association Rules model. I am receiving the following error: " Failed to execute data mining query due to the following error: The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column." Is there something special that I need to do with my dmx statement to get the sqldecimal data to insert into the numeric column? What is different about the Association Rules model? I rechecked my dmx statement and it is the same for other models.
Let me know if you need more information.
Thanks
View 2 Replies
View Related
Mar 12, 2008
Hi,
I have the following table
(1) Item Table
ItemID Name
1 Sample Item
(2) Brand Table
BrandID Name
1 Sample Brand - 1
2 Sample Brand - 2
(3) ItemBrand Table
ItemID BrandID
1 1
1 2
Desired Output
ItemID ItemName Brand1 Brand2
--------------------------------------------------------
1 Sample Item Sample Brand - 1 Sample Brand - 2
How to get the desired output?
View 2 Replies
View Related
Aug 1, 2006
First of all, we are using SQL Server 2005 with a SQL Mobile subscriber and we are attempting to use Data Partitions on our current database
schema which contains associative tables for many-to-many relationships.
We have two tables, a User table
and an Audit table. A user can be
assigned more than one Audit. An Audit
can be assigned to more than one User.
So an AuditUser associative table exists. If data partitions are used based on User,
then any Audits that are assigned to one or more users should be copied to the
proper partition for each User (the msmerge_current_partition_mappings table
with the proper partition_id values).
In order to insert records with such a schema, the following
steps occur in order:
Insert
new row into Audit table with new rowguidInsert
entry into AuditUser table associating the auditguid with every userguid that
is assigned this audit.
Merge replication triggers are fired on insert of the Audit
row and another one for the insert of the AuditUser row.
When the Audit row is inserted, the replication trigger follows
the following logic:
Inserts
a copy of that row into the msmerge_contents table. Evaluates
the row to determine which partition(s) this row should be copied to as
well (msmerge_current_partition_mappings table). To do this, it checks to see if the
AuditGuid is referenced in one or more AuditUser rows. Since we haven€™t inserted the AuditUser
row at this point, the trigger€™s logic doesn€™t find a partition to copy
this row to.
When the AuditUser row is inserted, the replication trigger performs
the same logic as with the Audit row, it:
Inserts
a copy of that row into the msmerge_contents table.Evaluates
the row to determine which partition(s) this row should be copied to as
well (msmerge_current_partition_mappings table). Since the row meets the criteria for one
or more partitions, it is copied to the msmerge_current_partition_mappings
table for each partition that exists.
When replication occurs, we see only the AuditUser rows
copied down to our device, and not the corresponding Audit rows. Now that we understand the triggers, it is
plain to see why. If the AuditUser row
could be inserted first, then the trigger on the Audit row would copy that row
into the proper partitions and all would work well. However, the Audit row must be inserted
first, so that foreign key relationship constraints are preserved.
It seems that the Update trigger on the AuditUser row
actually walks the relationships and copies any related child rows to the
msmerge_current_partition_mappings table.
View 3 Replies
View Related
Apr 15, 2015
I have a table which maps two related IDs. That table has 3 columns: ID, BHID & EPID. I need to find all of the BHIDs where the EPID is unique. It seems easy enough, but I keep going in circles..
USE [CGB]
GO
/****** Object: Table [dbo].[ePID_BHID] Script Date: 04/15/2015 15:48:14 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
[code]....
View 2 Replies
View Related
Apr 14, 2004
Hi I am getting the following error:
Event Type: Error
Event Source: MSSQLSERVER
Event Category: (2)
Event ID: 17052
Date: 4/14/2004
Time: 09:32:05 AM
User: SYSTEM
Computer: BSEW2k01
Description:
Error: 50000, Severity: 5, State: 1
Error Calling StatusToStreet In DCS0 Code 7202
Please help.
Thanks
View 2 Replies
View Related
Feb 15, 2008
Hi, I am getting the following error when I try to open up my web application now, after installing the report viewer add on and placing it onto one of my pages.
Parser Error Message: Could not load file or assembly 'Microsoft.ReportViewer.WebForms, Version=8.0.0.0, Culture=nutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system could not find the file specified.
Source Error:
Line 47: <add assembly="Microsoft.ReportViewer.WebForms, Version=8.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A" />
Source File: web.config
So far I have tried to fix this error by installing the reportviewer.exe on the server. I have also verified that the ReportViewer files are in the assembly folder on the server. I also found a site saying to run the reportviewer.exe from a specific location, here is the link
http://dotnetslackers.com/_NET/re-49414_Could_not_load_file_or_assembly_Microsoft_ReportViewer_WebForms.aspx
but when I try to browse to the folder it is talking about I found out that I don't even have a BootStrapper folder under Microsoft Visual Studio 8/SDK/v2.0
Does anyone have any ideas on how to fix this error?
View 1 Replies
View Related
Sep 13, 2007
I have successfully created and processed a mining structure (decision tree). However, when I try to generate the tree graph, I am getting the following error:
TITLE: Microsoft Visual Studio
------------------------------
The tree graph cannot be created because of the following error:
'Object reference not set to an instance of an object.'.
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.762&EvtSrc=Microsoft.AnalysisServices.Viewers.SR&EvtID=ErrorCreateGraphFailed&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
Object reference not set to an instance of an object. (Microsoft.AnalysisServices.Viewers)
------------------------------
BUTTONS:
OK
------------------------------
...with the following technical details
===================================
The tree graph cannot be created because of the following error:
'Object reference not set to an instance of an object.'. (Microsoft Visual Studio)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.762&EvtSrc=Microsoft.AnalysisServices.Viewers.SR&EvtID=ErrorCreateGraphFailed&LinkId=20476
===================================
Object reference not set to an instance of an object. (Microsoft.AnalysisServices.Viewers)
------------------------------
Program Location:
at Microsoft.AnalysisServices.Viewers.TreeViewerBase.GetTooltipText(TreeGraphNode treeNode)
at Microsoft.AnalysisServices.Viewers.TreeViewerBase.predictionTreeComboBox_SelectedIndexAction()
Has anyone encountered this same error?
View 1 Replies
View Related
Mar 6, 2001
Hi All,
I see this error message on one of my servers Event Viewer..Can anyon tell me what it means and how to resolve it..
The library file "C:WINNTSystem32BEPerfDll.dll" specified for the "Backup Exec" service could not be opened. Performance data for this service will not be available. Status code is data DWORD 0.
Thanks,
Venu
View 1 Replies
View Related
Jul 23, 2005
I have a stored procedure that I use for call a aspx page from within SQL. The stored procedure itself runs finewith no errors but I keep getting errors in the event viewer everytimeit runs (with .vbs, .NET, .vb6 client) outside Enterprise manager or SQL Query Analyzer.....This is error:Error: 0, Severity: 19, State: 0SqlDumpExceptionHandler: Process 52 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process.I think that this is the same problem seen inhttp://www.sqlmonster.com/Uwe/Forum...in-Event-ViewerI've test with XP sp2, W2003 server, SQL 2000 sp3a......on the same machine.ANY SUGGESTIONS??????Thanks--Message posted via http://www.sqlmonster.com
View 3 Replies
View Related
Jan 26, 2007
I am trying to integrate reports that I have built with VS 2005 and deployed to my report server locally.
The path to the report is
http://SERVERNAME/Reports/Pages/Report.aspx?ItemPath=%2fBilling+System+Reports%2fBasic+Financial+Reports%2fBasic+Financial+Statistics+-+TimeKeeper+YTD
When I put that into the "Report" parameter the web part display an error:
The report server has encountered a configuration error. See the report server log files for more information
And when I click on the ellipses, I get a pop up with the same error.
I installed SQL2005 SP2 and the RS Add on for MS sharepoint CTP
Any help would be great!
Thanks,
Erik
View 2 Replies
View Related
Sep 21, 2006
Parser for XMLA (XML for Analysis): Timeout geting XMLA-Request (XML for Analysis).
Error when executing the administrated stored procedure 'GetItemsets': Exception has been thrown by the target of an invocation.Microsoft::AnalysisServices::AdomdServer::AdomdException.
I get this Error in Miningmodel-Viewer, what to do? This occurs when I set the MAXIMUM_ITEMSET_COUNT to 1,500,000 .
View 1 Replies
View Related
Aug 2, 2007
I have read the threads regarding the Neural Network Viewer and I think I have a similar problem. I do have Service Pack 2 installed and I'm running the x64 version of SQL 2005.
I'm building a model from a single relational CASE table. Granted the table has many columns summarized at the customer level but there are it is well formed and has no NULL values (plenty of zero or blank values though). The only time I can get the NN Viewer to work is when I accept the attribute recommendations. It seems once I stray from these recommendation, even if there is still correlation with an attribute, I cannot view the model using the NN Viewer. My latest error message says:
"The provider could not determine the String value. For example, the row was just created, the default for the String column was not available, and the consumer had not yet set a new String value."
I get this message even when all input attributes are Continuous so I'm not sure what String column it is referring to.
Any help is greatly appreciated. I'm in a time crunch and I have sold the client on SQL Server 2005 capabilities. It's a bit embarrasing if I can't get this resolved.
-- Steve
P.S.: I don't recall having any issues with the NN Viewer prior to Service Pack 2 (although others have). Have you done regression testing to test this issue?
View 3 Replies
View Related
Mar 27, 2007
I have created a report on my local machine and deployed it on a server. As I am the administrator of the server, I can access the reports with servernameReports. The report has got three data sets. Out of these three one is a Stored procedure and other two data sets have sql queries. The user selects the 'Business year' and 'sales type' from list box. This report works perfect from my local machine as well as from teh server when I am running it
I have some other users who wish to access these reports. I did the following steps:
Created a new role and assigned it at the Data Source Folder and Reports Folder
I also made the user a Database user on the server.
After doing these steps, the user can access the Reports site by servernameReports.
The user then can go into the Reports folder. But when the user tries to run the report, he gets an error with:
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for data set 'BusinessYear'. (rsErrorExecutingCommand)
For more information about this error navigate to the report server on the local server machine, or enable remote errors
Can anyone help me with this? Is htere something to do with setting up of the datasource?
I have tried to search, but could not find relevant info.
Any help/Pointers will be really appreciated.
regards
Joshker
View 1 Replies
View Related
May 15, 2008
Hi,
We have a solution where we from a Windows application (using the report viewer control SP1) display some reports. Some of the reports uses a custom report item to display some graphics. This works fine on a lot of different installations, but now (for some reason) we have a problem at one customer.
We get strange GDI and transport errors when rendering these reports:
"Unable to read data from the transport connection: The connection was closed."
or
"Remote GDI stream version: 10.0.1. Expected version 10.0.1. Offset and length were out of bounds for the array or count is greater than the number of elements from the index to the end of the source collection."
These report work fine when you run them in the browser, but they never work in the report viewer control...
Please provide some help.
Kind Regards
Sune
View 7 Replies
View Related
Jan 22, 2007
I am developing a multiple regression model for a super market site selection with 11 predictors.
As soon as I press the model viewer tab, the following message appears:
The server content appears to be out of date.
Would you like to build and deploy the project first?
I opt no and the error message pops up:
The tree graph cannot be created because of the following error:
'Either the user, ......., does not have access to the ....... database, or the database does not exist.'.
Could anyone mine out the cause please....
saji
View 1 Replies
View Related
Jan 26, 2008
Parser Error Message: Could not load file or assembly 'Microsoft.ReportViewer.WebForms, Version=9.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.
I'm not sure what to do to fix this. I've downloaded the redistributable for the report viewer. Please help, I need to have this before the weekend is over.
Thanks,
View 4 Replies
View Related
Aug 22, 2007
Hi All,
I am deploying my reports on to the report viewer on a Sharepoint site. I wanted to know how to handle exception in the reports here. I was looking for exception handling in SSRS, but most of them are given with respect to displaying reports in ASP.NET pages. Is there any way I can configure Report Viewer to display friendly error messages instead of the vague error messages displayed from SSRS.
Thanks,
S Suresh
View 1 Replies
View Related
Dec 5, 2006
Hi
We are having problems with our application that uses SQL Server 2005 in a cluster environment. Sometimes the system stops answering and registers in the log viewer the following error:
=====================================================================
BugCheck Dump
=====================================================================
This file is generated by Microsoft SQL Server
version 9.00.1399.06
upon detection of fatal unexpected error. Please return this file, the query or program that produced the bugcheck, the database and the error log, and any other pertinent information with a Service Request.
Computer type is AT/AT COMPATIBLE.
Bios Version is IBM - 1001
Current time is 16:48:36 12/05/06.
2 Intel x86 level 15, 3600 Mhz processor (s).
Windows NT 5.2 Build 3790 CSD Service Pack 1.
Memory
MemoryLoad = 74%
Total Physical = 3327 MB
Available Physical = 858 MB
Total Page File = 9318 MB
Available Page File = 7058 MB
Total Virtual = 2047 MB
Available Virtual = 274 MB
**Dump thread - spid = 132, PSS = 0x71E09588, EC = 0x71E09590
***Stack Dump being sent to E:Microsoft SQL ServerMSSQL.1MSSQLLOGSQLDump0178.txt
* *******************************************************************************
*
* BEGIN STACK DUMP:
* 12/05/06 16:48:36 spid 132
*
* Location: lckmgr.cpp:10820
* Expression: GetLocalLockPartition () == xactLockInfo->GetLocalLockPartition ()
* SPID: 132
* Process ID: 2436
*
* Input Buffer 255 bytes -
* „ 16 00 00 00 12 00 00 00 02 00 01 00 00 00 84 00 00 00
* ÿÿ çd � 01 00 00 00 ff ff 0a 00 02 00 00 00 e7 64 09 09 04 d0
* 4d S E L E C T 00 34 64 09 20 00 53 00 45 00 4c 00 45 00 43 00 54 00
* TAbleA (*) 20 00 54 00 48 00 69 00 73 00 74 00 6f 00 72 00 69 00
(*) There is a query here that I have excluded in the message
*
* MODULE BASE END SIZE
* sqlservr 01000000 02BA7FFF 01ba8000
* ntdll 7C910000 7C9D3FFF 000c4000
* kernel32 7C800000 7C90BFFF 0010c000
* MSVCR80 78130000 781CAFFF 0009b000
* msvcrt 77B90000 77BE9FFF 0005a000
* MSVCP80 7C420000 7C4A6FFF 00087000
* ADVAPI32 77D90000 77E3DFFF 000ae000
* RPCRT4 77C40000 77CDEFFF 0009f000
* USER32 77F40000 77FD1FFF 00092000
* GDI32 77BF0000 77C37FFF 00048000
* CRYPT32 760D0000 76164FFF 00095000
* MSASN1 760B0000 760C1FFF 00012000
* Secur32 76E70000 76E82FFF 00013000
* MSWSOCK 71970000 719B1FFF 00042000
* WS2_32 71A50000 71A66FFF 00017000
* WS2HELP 71A40000 71A47FFF 00008000
* USERENV 76840000 76904FFF 000c5000
* opends60 333E0000 333E6FFF 00007000
* NETAPI32 71A90000 71AE7FFF 00058000
* SHELL32 7C9E0000 7D1EAFFF 0080b000
* SHLWAPI 77EE0000 77F31FFF 00052000
* comctl32 77360000 77462FFF 00103000
* EntApi 37000000 37012FFF 00013000
* PSAPI 76A90000 76A9AFFF 0000b000
* WININET 779D0000 77A78FFF 000a9000
* OLEAUT32 77CF0000 77D7BFFF 0008c000
* ole32 77510000 77643FFF 00134000
* instapi 48060000 48069FFF 0000a000
* CLUSAPI 74CF0000 74D01FFF 00012000
* RESUTILS 74E00000 74E12FFF 00013000
* sqlevn70 4F610000 4F7A0FFF 00191000
* SQLOS 344D0000 344D4FFF 00005000
* rsaenh 68000000 6802EFFF 0002f000
* AUTHZ 76B60000 76B73FFF 00014000
* MSCOREE 340C0000 34104FFF 00045000
* msv1_0 76BB0000 76BD6FFF 00027000
* iphlpapi 76C10000 76C29FFF 0001a000
* kerberos 34330000 34387FFF 00058000
* cryptdll 76600000 7660BFFF 0000c000
* schannel 76670000 76696FFF 00027000
* COMRES 76F30000 770BCFFF 0018d000
* XOLEHLP 343F0000 343F5FFF 00006000
* MSDTCPRX 34400000 34477FFF 00078000
* msvcp60 780C0000 78120FFF 00061000
* MTXCLU 74E50000 74E68FFF 00019000
* VERSION 77B80000 77B87FFF 00008000
* WSOCK32 71A00000 71A09FFF 0000a000
* DNSAPI 76DF0000 76E1EFFF 0002f000
* winrnr 76E90000 76E96FFF 00007000
* WLDAP32 76E30000 76E5EFFF 0002f000
* rasadhlp 76EA0000 76EA7FFF 00008000
* hnetcfg 36190000 361E8FFF 00059000
* wshtcpip 71930000 71937FFF 00008000
* security 36340000 36343FFF 00004000
* msfte 36A60000 36CB7FFF 00258000
* dbghelp 36D00000 36E17FFF 00118000
* WINTRUST 76AD0000 76AFAFFF 0002b000
* imagehlp 76B30000 76B58FFF 00029000
* dssenh 68100000 68123FFF 00024000
* NTMARTA 777B0000 777D1FFF 00022000
* SAMLIB 36FE0000 36FEEFFF 0000f000
* ntdsapi 76610000 76624FFF 00015000
* xpsp2res 61BF0000 61EBFFFF 002d0000
* CLBCatQ 77650000 776D2FFF 00083000
* sqlncli 61EC0000 620E1FFF 00222000
* COMCTL32 77E40000 77ED6FFF 00097000
* comdlg32 761D0000 76218FFF 00049000
* SQLNCLIR 007C0000 007F2FFF 00033000
* msftepxy 621F0000 62204FFF 00015000
* xpsqlbot 62860000 62865FFF 00006000
* xpstar90 62880000 628C4FFF 00045000
* SQLSCM90 628E0000 628E8FFF 00009000
* ODBC32 62900000 6293CFFF 0003d000
* BatchParser90 62940000 6295DFFF 0001e000
* SQLSVC90 62970000 62989FFF 0001a000
* SqlResourceLoader 629A0000 629A5FFF 00006000
* ATL80 7C630000 7C64AFFF 0001b000
* odbcint 62B00000 62B17FFF 00018000
* SQLSVC90 62B20000 62B22FFF 00003000
* xpstar90 62B30000 62B55FFF 00026000
* xplog70 62B60000 62B6BFFF 0000c000
* xplog70 62B80000 62B82FFF 00003000
* oledb32 631B0000 63228FFF 00079000
* MSDART 63230000 63249FFF 0001a000
* OLEDB32R 634D0000 634E1FFF 00012000
* activeds 76D10000 76D42FFF 00033000
* adsldpc 76CE0000 76D06FFF 00027000
* credui 76AA0000 76ACDFFF 0002e000
* ATL 769A0000 769B7FFF 00018000
* adsldp 71110000 7113DFFF 0002e000
* SXS 75CB0000 75D6BFFF 000bc000
* dbghelp 65D40000 65E52FFF 00113000
*
* Edi: 6610BCB8: 636A1900 3E3A6040 62F1A040 6610D8AD 0279E900 3E3A63D8
* Esi: 00000000:
* Eax: 6610BB9C: 000042AC 00000000 00000000 7C815E02 00000000 7C931B34
* Ebx: 0000003F:
* Ecx: 6610C20C: 00000000 00010007 00000000 00740072 636A1904 6610BBCC
* Edx: 0000003D:
* Eip: 7C815E02: 10C2C95E 90909000 A1649090 00000018 C334408B 891C428B
* Ebp: 6610BBEC: 6610BC30 02172CE4 000042AC 00000000 00000000 00000000
* SegCs: 0000001B:
* EFlags: 00000246:
* Esp: 6610BB98: 71E09588 000042AC 00000000 00000000 7C815E02 00000000
* SegSs: 78130023: 00000000 00000000 00000000 00000000 00000000 00000000
* *******************************************************************************
* -------------------------------------------------------------------------------
* Short Stack Dump
7C815E02 Module(kernel32+00015E02)
02172CE4 Module(sqlservr+01172CE4)
02176BA0 Module(sqlservr+01176BA0)
02019506 Module(sqlservr+01019506)
015738EE Module(sqlservr+005738EE)
021B15B6 Module(sqlservr+011B15B6)
0163DD36 Module(sqlservr+0063DD36)
010E9FA3 Module(sqlservr+000E9FA3)
010B0F5F Module(sqlservr+000B0F5F)
0102C5F8 Module(sqlservr+0002C5F8)
01BEE12B Module(sqlservr+00BEE12B)
01BF2BCB Module(sqlservr+00BF2BCB)
01BF353D Module(sqlservr+00BF353D)
010438E5 Module(sqlservr+000438E5)
01041C35 Module(sqlservr+00041C35)
0100889F Module(sqlservr+0000889F)
010089C5 Module(sqlservr+000089C5)
010086E7 Module(sqlservr+000086E7)
010D764A Module(sqlservr+000D764A)
010D7B71 Module(sqlservr+000D7B71)
010D746E Module(sqlservr+000D746E)
010D83F0 Module(sqlservr+000D83F0)
781329AA Module(MSVCR80+000029AA)
78132A36 Module(MSVCR80+00002A36)
PSS @0x71E09588
---------------
CSession @0x71E08278
--------------------
m_spid = 132 m_cRef = 12 m_rgcRefType[0] = 1
m_rgcRefType[1] = 1 m_rgcRefType[2] = 9 m_rgcRefType[3] = 1
m_rgcRefType[4] = 0 m_rgcRefType[5] = 0 m_pmo = 0x71E08040
m_pstackBhfPool = 0x00000000 m_dwLoginFlags = 0x03e0 m_fBackground = 0
m_fClientRequestConnReset = 0 m_fUserProc = -1 m_fConnReset = 0
m_fIsConnReset = 0 m_fInLogin = 0 m_fReplRelease = 0
m_fKill = 0 m_ulLoginStamp = 3105683 m_eclClient = 5
m_protType = 5 m_hHttpToken = FFFFFFFF
m_pV7LoginRec
---------------------
00000000: 18010000 02000972 401f0000 00000006 400c0000 € .......r@.......@...
00000014: 00000000 e0030000 00000000 00000000 5e000400 € ................^...
00000028: 66000200 6a000000 7a001c00 b2000c00 ca000000 € f...j...z...........
0000003C: ca001c00 02010000 02010b00 60f120db ad481801 € ............`. ..H..
00000050: 00001801 00001801 00000000 0000€ € € € € € € € € € € € € € € ..............
CPhysicalConnection @0x71E08188
-------------------------------
m_pPhyConn->m_pmo = 0x71E08040 m_pPhyConn->m_pNetConn = 0x71E08788 m_pPhyConn->m_pConnList = 0x71E08260
m_pPhyConn->m_pSess = 0x71E08278 m_pPhyConn->m_fTracked = -1 m_pPhyConn->m_cbPacketsize = 8000
m_pPhyConn->m_fMars = 0 m_pPhyConn->m_fKill = 0
CBatch @0x71E08A90
------------------
m_pSess = 0x71E08278 m_pConn = 0x71E089F0 m_cRef = 3
m_rgcRefType[0] = 1 m_rgcRefType[1] = 1 m_rgcRefType[2] = 1
m_rgcRefType[3] = 0 m_rgcRefType[4] = 0 m_pTask = 0x006F9D38
EXCEPT (null) @0x6610B4AC
-------------------------
exc_number = 0 exc_severity = 0 exc_func = 0x023D96B0
Task @0x006F9D38
----------------
CPU Ticks used (ms) = 1 Task State = 2
WAITINFO_INTERNAL: WaitResource = 0x00000000 WAITINFO_INTERNAL: WaitType = 0x0
WAITINFO_INTERNAL: WaitSpinlock = 0x00000000 SchedulerId = 0x0
ThreadId = 0x444 m_state = 0 m_eAbortSev = 0
EC @0x71E09590
--------------
spid = 132 ecid = 0 ec_stat = 0x0
ec_stat2 = 0x40 ec_atomic = 0x4 __fSubProc = 1
ec_dbccContext = 0x00000000 __pSETLS = 0x71E08A30 __pSEParams = 0x71E08CD0
__pDbLocks = 0x71E09878
SEInternalTLS @0x71E08A30
-------------------------
m_flags = 0 m_TLSstatus = 3 m_owningTask = 0x006F9D38
m_activeHeapDatasetList = 0x71E08A30 m_activeIndexDatasetList = 0x71E08A38
SEParams @0x71E08CD0
--------------------
m_lockTimeout = -1 m_isoLevel = 1048576 m_logDontReplicate = 0
m_neverReplicate = 0 m_XactWorkspace = 0x03F78940 m_pSessionLocks = 0x71E09A88
m_pDbLocks = 0x71E09878 m_execStats = 0x3F867018 m_pAllocFileLimit = 0x00000000
Does anybody know what€™s going on?
I will be very appreciate if someone can help me to solve this problem. Thank you!
View 3 Replies
View Related
Sep 2, 2015
I have created a project using MVC 4 application.i have created a dataset model and .rdlc file using report viewer but i'm getting the following error when i run it.
View 5 Replies
View Related
Nov 17, 2006
I've successfully created and processed a very simple neural network mining model (defined against a cube). However, when I go to the model viewer in BI studio, it displays the following error:
"Execution of the managed stored procedure GetAttributeScores failed with the following error: Exception has been thrown by the target of an invocation.Input string was not in a correct format.."
Any ideas about what's going wrong? This is with SQL Server 2005 SP1.
View 4 Replies
View Related
Sep 8, 2015
I have created a .rdlc file in MVC application. I have used Matrix in report and also i have bar charts. Issue is when I view the report in my application--all the months data and all the years data is getting summed up..
ex:
it should display like
jan  feb  mar
1 Â Â 2 Â Â Â 3
but it is coming like
Mar
6
I have group by as Month for Month columns and Year for Year columns, how to fix this error.
View 4 Replies
View Related
May 18, 2007
We've successfully processed a large decision tree model in SQL Server 2005. When I try to view the tree in the mining model viewer, I get the following error:
TITLE: Microsoft Visual Studio
------------------------------
The tree graph cannot be created because of the following error:
'Exception of type 'System.OutOfMemoryException' was thrown.'.
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.42&EvtSrc=Microsoft.AnalysisServices.Viewers.SR&EvtID=ErrorCreateGraphFailed&LinkId=20476
The link provides no other documentaiton on the error.
We're using 64-bit SQL on a Dell Workstation running XP-64 with 16GB of memory. From my view of things we aren't close to running out of memory. Since the model processed and the error occurs when viewing the model, is this a problem with Visual Studio and nont necessarily Anlaysis Services?
Thanks in advance.
Nick
View 4 Replies
View Related
Nov 20, 2007
Hello:
I have a framework 2.0 winforms application that uses the data mining viewer controls. I upgraded the project to visual studio 2008 and compiled it under framework 2.0. It compiles fine, but when the form with the TimeSeriesViewer control loads, the application throws the following exception:
System.Reflection.TargetInvocationException was unhandled by user code
Message="Unable to get the window handle for the 'AxChartSpace' control. Windowless ActiveX controls are not supported."
Source="System.Windows.Forms"
StackTrace:
at System.Windows.Forms.AxHost.InPlaceActivate()
at System.Windows.Forms.AxHost.TransitionUpTo(Int32 state)
at System.Windows.Forms.AxHost.CreateHandle()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.AxHost.EndInit()
at Microsoft.AnalysisServices.Viewers.TimeSeriesViewer.InitializeComponent()
at Microsoft.AnalysisServices.Viewers.TimeSeriesViewer..ctor()
at RMS2.UI.DecisionSupport.ShowModel(String modelName, Int32 tabIndex) in C:UsersDougDocumentsRmsIIRmsIIRMS2.UIDecisionSupport.cs:line 72
at RMS2.UI.DecisionSupport.DecisionSupport_Load(Object sender, EventArgs e) in C:UsersDougDocumentsRmsIIRmsIIRMS2.UIDecisionSupport.cs:line 42
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
InnerException: System.AccessViolationException
Message="Attempted to read or write protected memory. This is often an indication that other memory is corrupt."
Source="System.Windows.Forms"
StackTrace:
at System.Windows.Forms.UnsafeNativeMethods.IOleObject.DoVerb(Int32 iVerb, IntPtr lpmsg, IOleClientSite pActiveSite, Int32 lindex, IntPtr hwndParent, COMRECT lprcPosRect)
at System.Windows.Forms.AxHost.DoVerb(Int32 verb)
at System.Windows.Forms.AxHost.InPlaceActivate()
InnerException:
The control is being added programatically, as in the wiinforms samples. Can anyone suggest a workaround? Thank you in advance.
- doug
View 5 Replies
View Related
Jan 17, 2007
Good morning,
Well... As I said in other topics, I'm doing a clustering plugin for text mining. I'm facing many problems and, with your help, solving them one by one.
First of all, thanks a lot again.
Well... I've made a clustering function that is actually working very well. But I'm exporting its results to a log file I use as an algorithm trace for debugging.
My clustering method returns a vector containing information of what cluster each register belongs. For instance:
vector[0] = 1 -> The register of index 0 belongs to cluster 1.
vector[1] = 9 -> The register of index 1 belongs to cluster 9.
vector[2] = 2 -> The register of index 2 belongs to cluster 2.
...
And so on.
But... I know that none of the Navigation methods receives a structure like this one discribed above. I only use it to log the results to debug the algorithm.
But how to pass this information (what register (or test case) belongs to what cluster) to the Navigation ?
Thanks a lot again, and any help will be very appreciated.
View 1 Replies
View Related
Jan 25, 2008
Hello,
I am passing the partameters to MS Report Viewer control to view the report. It is working fine with normal parameters like 'abc', 'Jon' etc.
But fails with parameters having special characters like 'abc+', 'Version 1.1 Part 1', 'R1.8 RC' throws error "
The parameter is missing a value"
Could anyone please help on this.
Thanks,
Chandroday
View 1 Replies
View Related
Nov 2, 2006
I used the following reference code while creating this simple ASPX page with reportviewer control using VS 2005
http://www.tutorialsall.com/REPORTINGSVCS/WebFormsReportViewer-ReportServerCredentials/
ReportViewer is having following properties
ProcessingMode = "Remote",
ReportServerUrl = "/foldername/myreport
ReportPath = "http://report.mydomain.com/reports"
Even after using admin user we got the same problem
Please help
View 9 Replies
View Related
Aug 23, 2013
On the SQL Server the Event Viewer shows the same messages and errors every evening between 22:05:00 and 22:08:00. The following information messages are shown for every database:
"I/O is frozen on database <database name>. No user action is required. However, if I/O is not resumed promptly, you could cancel the backup."
"I/O was resumed on database <database name>. No user action is required."
"Database backed up. Database: <database name>, creation date(time): 2003/04/08(09:13:36), pages dumped: 306, first LSN: 44:148:37, last LSN: 44:165:1, number of dump devices: 1, device information: (FILE=1, TYPE=VIRTUAL_DEVICE: {'{A79410F7-4AC5-47CE-9E9B-F91660F1072B}4'}). This is an informational message only. No user action is required."
After the 3 messages the following error message is shown for every database:
"BACKUP failed to complete the command BACKUP LOG <database name>. Check the backup application log for detailed messages."
I have added a Maintenance Plan but these jobs run after 02:00:00 at night.
Where can I find the command or setup which will backup all databases and log files at 22:00:00 in the evening?
View 9 Replies
View Related
Oct 29, 2007
I have SSRS 2005 SP2 configured to work in Sharepoint integration. Everything works fine except that I am not able to programmatically change any property of report viewer web part (instance) that I have added on on home page of my sharepoint site.
I can do same thing via sharepoint UI but not through program. When my programs runs it fetches all web parts been added on home page, then I need to iterate through each one and find report viewer web part.
While iterating, as soon as I arrive to report viewer web part it is named as "Error web part" with error message as
"Windows SharePoint Services cannot deserialize the Web Part. Check the format of the properties and try again"
If someone has a solution, please respond at your earlist.
Thanks
Shankar
View 1 Replies
View Related
Sep 6, 2007
hello, i've just started playing around with rules and udtis it possible to alter rule?are rules 'slower' compared to check constraint?
View 7 Replies
View Related
Feb 22, 2001
Please forgive my ignorance, however I am 2 months new to SQL-Server 2000.
Is there a way to create a rule specific to a user such that he can only SELECT from a table where a field equals a specific value.
In other words user Joe types in: SELECT * FROM SALES_BY_LOCATION. Because Joe's territory is Los Angeles, I want a rule that only retrieves sales data from Los Angeles.
View 1 Replies
View Related
Jun 11, 2004
In My table i'm collecting information about our customers.In that i have fields zip and phone.So i wanted to implemement a rule that zip should be atlaest of of 5 characters and phone should be 13 characters Including '-'s(333-333-3333).How can i implement these two rules on my table.
View 9 Replies
View Related
Oct 6, 2004
Not long ago I accountered this situation: I had two databases on "MS SQL Server". In one of the databases there was a nomenclature with very large primary key.
I had to transport that nomenclature and transform the wide PK into single identity column into the other database.
I decided to use a function for that transformation. BUT that function had to mark somewhere which combination of the PK columns is relative to which identity value. BUT functions CAN'T WRITE under MSSQL.
So I took the challenge and mine all sources of information. The result was a function "Exec4Fun" that breaks the rule.
I suppose that with this function it's possible to avoid the restriction for triggers, which prevents writing in the triggering table? (not tested yet)
If someone needs such tools, just write back your e-mail and I'll send some code.
All the best and have fun :)
View 4 Replies
View Related
