"[Flat File Destination [13]] Error: Data conversion failed. The data conversion for column "SDATA" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.". "
"[Flat File Destination [13]] Error: Cannot copy or convert flat file data for column "SDATA". "
"[DTS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Flat File Destination" (13) failed with error code 0xC02020A0. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure. "
"[DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC02020A0. There may be error messages posted before this with more information on why the thread has exited. "
"[DataReader Source [207]] Error: The component "DataReader Source" (207) was unable to process the data. "
"[DTS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "DataReader Source" (207) returned error code 0xC02090F5. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure. "
"[DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited. "
I am selecting data from an OBDC then copying it to a text file an I always get this error, but when I change the destination to a excel file it works perfectly. But the whole point of the package is to copy to a text file.
Please could you help me, your replies will be greatly appreciated.
Hello there,I just want to ask if storing data in dbase is much better than storing it in the file system? Because for one, i am currenlty developing my thesis which uploads a blob.doc file to a web server (currently i'm using the localhost of ASP.NET) then retrieves it from the local hostAlso i want to know if im right at this, the localhost of ASP.NET is the same as the one of a natural web server on the net? Because i'm just thinking of uploading and downloading the files from a web server. Although our thesis defense didn't require us to really upload it on the net, we were advised to use a localhost on our PC's. I'll be just using my local server Is it ok to just use a web server for storing files than a database?
In SQL 2005, what is the best way to take a text file and store it in a table field, then later extract that file to a directory with original name and format intact?
This may be a stupid question but I can't find an easy answer for what Iwant to do. I need a blob data field that can store both binary and textdata like the sql_variant field. I am using vb.net to populate a sql table.I want to store both string and binary data.
I'm having problems designing a package to attempt to execute a fast load data transfer but failback to regular speed with error redirection in the event of an error.
The way I designed this was to add one data flow task to my package called "DFT FASTLOAD". The data flow copies a table SRC to another table DEST in the same SQL Server database. In the error handler for the data flow task I copied the original data flow task and changed the name to "DFT REGULARLOAD with Error redirection". In this data flow task I did not use fast load and addtionally redirected errors to a text file.
In the Data Flow Task "DFT FASTLOAD". I am copying from a varchar source field(with non-date strings) to a datetime destination field to force errors. However the Data Flow Task "DFT REGULARLOAD with Error redirection" never seems to start transferring data from source to destination. The data Flow Task "DFT REGULARLOAD with Error redirection" turns yellow (after the error occurs in "DFT FASTLOAD"), but no data is being transferred). It seems like it hangs.
Do I need to increase the MaximumError Count or something? The data flow task "DFT FASTLOAD" does not turn red when the error occurs it just remains yellow, so i assume I'm on the right track since it seems the error is caught.
I have added screenshots ... hopefully these screenshots will clarify my problem.
I want to store a Zip file as a BLOB, but I get an error: "File 'C:<path of mdf file> ' appears to have been truncated by the operating system. Expected size is 2560KB but actual size is 1536KB " whenever the BLOB exceeds 1MB.
Any suggestions? How can I store larger .ZIP files to the Database? I am using MS SQL 2005 Express and the data type that I gave for the column to store Blob is "varbinary(MAX)".
I am inserting byte array in to this field. It works fine for a zip file less than 1MB but as soon as the zipped file size increases beyond 1MB, lots of error pop-up and then the database is not readable. Its says that, the data in the data base may have been corrupted...
Hi, I want to create a text file and write to text it by calling its assembly from Stored Procedure. Full Detail is given below
I write a code in class to create a text file and write text in it. 1) I creat a class in Visual Basic.Net 2005, whose code is given below: Imports System Imports System.IO Imports Microsoft.VisualBasic Imports System.Diagnostics Public Class WLog Public Shared Sub LogToTextFile(ByVal LogName As String, ByVal newMessage As String) Dim w As StreamWriter = File.AppendText(LogName) LogIt(newMessage, w) w.Close() End Sub Public Shared Sub LogIt(ByVal logMessage As String, ByVal wr As StreamWriter) wr.Write(ControlChars.CrLf & "Log Entry:") wr.WriteLine("(0) {1}", DateTime.Now.ToLongTimeString(), DateTime.Now.ToLongDateString()) wr.WriteLine(" :") wr.WriteLine(" :{0}", logMessage) wr.WriteLine("---------------------------") wr.Flush() End Sub Public Shared Sub LotToEventLog(ByVal errorMessage As String) Dim log As System.Diagnostics.EventLog = New System.Diagnostics.EventLog log.Source = "My Application" log.WriteEntry(errorMessage) End Sub End Class
2) Make & register its assembly, in SQL Server 2005. 3)Create Stored Procedure as given below:
CREATE PROCEDURE dbo.SP_LogTextFile ( @LogName nvarchar(255), @NewMessage nvarchar(255) ) AS EXTERNAL NAME [asmLog].[WriteLog.WLog].[LogToTextFile]
4) When i execute this stored procedure as Execute SP_LogTextFile 'C:Test.txt','Message1'
5) Then i got the following error Msg 6522, Level 16, State 1, Procedure SP_LogTextFile, Line 0 A .NET Framework error occurred during execution of user defined routine or aggregate 'SP_LogTextFile': System.UnauthorizedAccessException: Access to the path 'C:Test.txt' is denied. System.UnauthorizedAccessException: at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath) at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy) at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, ileOptions options) at System.IO.StreamWriter.CreateFile(String path, Boolean append) at System.IO.StreamWriter..ctor(String path, Boolean append, Encoding encoding, Int32 bufferSize) at System.IO.StreamWriter..ctor(String path, Boolean append) at System.IO.File.AppendText(String path) at WriteLog.WLog.LogToTextFile(String LogName, String newMessage)
I get this error: The data types text and text are incompatible in the equal to operator. when trying to execute this query SELECT id FROM users WHERE username=@userName
Hello friends.... I am looking for 2 things(using c#.net or vb.net and sql svr 2000) 1.convert data from sql server 2000 database (say customers table from northwinds database) to a text file(separated by commas or just plain space) 2.Insert the data from text file back to database. Can someone pls give me the detailed code to achieve this....really need this on urgent basis.......Thank You.
The ERP manufacturer used an image data type to store large text data fields. I am trying to move these data types from one database to another database using either Sql Queries or MS Access. I can cast them as an 8000 char varchar to read them directly but have no luck importing into these image data fields.
Access and Crystal are not able to read these fields directly.
Any suggestions? Most information about these fields has to do with loading files but I am just moving data.
Hello!! searching information about how to migrate some date from an old data base (any tipe) from SQL I´v found this: LOAD DATA [LOW_PRIORITY | CONCURRENT] [LOCAL] INFILE 'file_name.txt' [REPLACE | IGNORE] INTO TABLE tbl_name [FIELDS [TERMINATED BY 'string'] [[OPTIONALLY] ENCLOSED BY 'char'] [ESCAPED BY 'char' ] ] [LINES [STARTING BY 'string'] [TERMINATED BY 'string'] ] [IGNORE number LINES] [(col_name_or_user_var,...)] [SET col_name = expr,...)] Does anybody know how does it works and how to use it????I´d like to know because I have to load data from a text file to a SQL Data Base and this seems to be te fastest an easiest way to do it...Thanks!!!!bye!
Hey All, I am developing a data acquistion system which monitors the amount of energy that a user consumes in different parts of a house and displays the information in real time on their computer screen. I am collecting the data through tranducers attached to the circuit breakers in the breaker box and sending the data to analog-to-digital converter channels in a MCU. I am retrieving the data from the serial port and storing it to a text file. Each line of data in the text file represents three fields which are separated by commas. I will be reading data from multiple data collection boxes so the first field is the unit number, the second fied represents the analog-to-digital converter channel number from each unit, and the third field is the data that is collected from the ATD channel. I am trying to use SSE to retrieve the data from the text file, and parse each line of data into individual columns in a databse. Then I want to be able to extract the data associated with a particular ATD channel number from the databse and display it in the appropriate text field on a windows form. I've got the MCU programmed. I have no problem collecting the data from the serial port, and I can do the visual basic programming okay. I have absolutely no clue how to read the data into the database, continuosly read new values into the databse, and then access the stored data to update the text fields on the form. Please help if you can, I've been working on this specific problem for a couple of weeks and I'm not making any progress. Thanks.
I getting really frustrated here when trying to export a table with many columns into a text file. This does not happen when the table is relatively small. I am using client tools on my machine connecting into SQL Server 2000 (sp3) that resides on a different box. I have installed the client tools on my machine from scratch; no SQL server components were on it before. The version in the Add/Remove Program for SQL Server 2000 showed 8.00.194. Then I have upgraded my machine (Not the server) client tools into sp3a (sp3a). The version in the Add/Remove Program for SQL Server 2000 shows 8.00.761.
Now, the problem is when I try to create a package that export data into a text file and the source is a table or a view with many columns, even only 18 columns. Trying to define the column structure in the destination file using "Define columns" button on the Destination tab, I get error message "The instruction at "0x780014b1" referenced memory at "0x00000000". The memory could not be "read". and Enterprise Manager fails. This did not happened when I had version 194 before. only after installing sp3a. when I try to open a package that has been created in 194 version I can see the column definition of the destination, but again, it fails when I try to change it by "Populate from source" and "Execute". Also, I can't change the column size on the "Define columns" window (for fixed length destination), but I could do it on 194 version.
So: 1. How come the newer version is worse than the previous one ? I know that Microsoft has solved some problems relating to this issues (some MDAC changes and more). 2.What can I do to solve this problem. Do I have to have other version ?
I have a dts package that imports a text file into SQL Sever. If I right click "execute" on the package it works fine, but when I schedule the package to run as a job the package fails with the following error: DTSRun OnError: Copy Data from dw000200ar to [APDData].[dbo].[TblProb] Step, Error = -2147467259 (80004005) Error string: Error opening datafile: The specified user does not exist. Any help is appreciated.
Hey All, I am developing a data acquistion system which monitors the amount of energy that a user consumes in different parts of a house and displays the information in real time on their computer screen. I am collecting the data through tranducers attached to the circuit breakers in the breaker box and sending the data to analog-to-digital converter channels in a MCU. I am retrieving the data from the serial port and storing it to a text file. Each line of data in the text file represents three fields which are separated by commas. I will be reading data from multiple data collection boxes so the first field is the unit number, the second fied represents the analog-to-digital converter channel number from each unit, and the third field is the data that is collected from the ATD channel. I am trying to use SSE to retrieve the data from the text file, and parse each line of data into individual columns in a databse. Then I want to be able to extract the data associated with a particular ATD channel number from the databse and display it in the appropriate text field on a windows form. I've got the MCU programmed. I have no problem collecting the data from the serial port, and I can do the visual basic programming okay. I have absolutely no clue how to read the data into the database, continuosly read new values into the databse, and then access the stored data to update the text fields on the form. Please help if you can, I've been working on this specific problem for a couple of weeks and I'm not making any progress. Thanks.
I was planning on running a service where thousands of text messages are stored. Obviously I'd want to make the most of my DB space, and was wondering if there's some way for SQL to compress text down to the smallest space possible. If not, is there some kind of ASP component I could download to do this? Failing that, I could always write a simple one, which takes the most common letter combinations, and shortens them down to a single character.
Just a quick question to ask what is the best field to store the data held in a rich text box/control. Just want to make sure that i get it right first time you know. Not sure about the amount of characters that needs held but its going to be quite a lot as this field shall contain most of my pages content.
Hi Everyone, I have a simple webform with a text box with multiline enabled and a submit button, in vb.net. Inside the text box, when you are typing text with let's say adding carriage returns, spaces etc. How to i save the text to a database? By that, i mean, how to i declare the column in my database, varchar, text ...? Also, when retrieving the saved text back to the textbox, will it keep the formatting because that's what i am trying to do? Or, what is the best way to keep text formatting in a database? Thanks for the help, Kevin
Hi!I want to store some really big text in my database (for my articles). The approximate size will be from 500 to 40000 characters. I was thinking of using the database 'text' datatype.I have heard that reading these text fields is slower and decreases the performance. Moreover is it advisable to index this for searching purposes?
As we all know, there is a 8060 bytes size limit on SQL Server rows. Ihave a table which requires a number of text fields (5 or 6). Each ofthese text fields should support a max of 4000 characters. We currentlystore the data in varchar columns, which worked fine untill ourappetite for text fields increased to the current requirement of 5, 6fields of 4000 characters size. I am given to review a design, whichesentially suggests moving the text columns to a separate TextFieldstable. The TextFields table will have two columns - a unique referenceand a VARCHAR (4000) column, thus allowing us to crossreference withthe original record. My first impresion is that I'd rather use the SQLServer 'text' DB type instead, which would allow me the samefunctionality with much less effort and possibly better performance.Can anyone advise on advantages and disadvantages of the two optionsand what the best practice in this case would be.Any advise will be well appreciated.Tzanko
hi in my front end i have one text area where user can input his sql statements. for samller data its working. the data type of coulmn is Text in sql server 2005. but problem is when i try to store this data its showing error.i meant not storing data at all. if i cut some of line from this then in this case it stores the data .what should i do to overcome this problem
thanx a lot.
DECLARE @sTemp VARCHAR(10) DECLARE @nMemberID INT DECLARE @nPartnerID INT DECLARE @nDocumentTypeNo INT DECLARE @nDocumentFormat INT DECLARE @sEmailAddress VARCHAR(200) SET @sTemp = '{*MEMBERID*}' IF UPPER(@sTemp) = 'NULL' SET @nMemberID = NULL ELSE SET @nMemberID = CAST(@sTemp AS INT) SET @sTemp = '{*PARTNERID*}' IF UPPER(@sTemp) = 'NULL' SET @nPartnerID = NULL ELSE SET @nPartnerID = CAST(@sTemp AS INT) SET @sTemp = '{*DOCUMENTTYPENO*}' IF UPPER(@sTemp) = 'NULL' SET @nDocumentTypeNo = NULL ELSE SET @nDocumentTypeNo = CAST(@sTemp AS INT) SET @sTemp = '{*DOCUMENTFORMAT*}' IF UPPER(@sTemp) = 'NULL' SET @nDocumentFormat = NULL ELSE SET @nDocumentFormat = CAST(@sTemp AS INT) SET @sEmailAddress = '{*EMAILADDRESS*}' IF EXISTS(SELECT * FROM ProtocolSettings WHERE ((@nMemberID IS NULL AND MemberID IS NULL) OR MemberID = @nMemberID) AND ((@nPartnerID IS NULL AND PartnerID IS NULL) OR PartnerID = @nPartnerID) AND ((@nDocumentTypeNo IS NULL AND DocumentTypeNo IS NULL) OR DocumentTypeNo = @nDocumentTypeNo) AND ((@nDocumentFormat IS NULL AND DocumentFormatNo IS NULL) OR DocumentFormatNo = @nDocumentFormat) AND ProtocolSettingNo = 307) BEGIN UPDATE ProtocolSettings SET SettingValue = @sEmailAddress WHERE ((@nMemberID IS NULL AND MemberID IS NULL) OR MemberID = @nMemberID) AND ((@nPartnerID IS NULL AND PartnerID IS NULL) OR PartnerID = @nPartnerID) AND ((@nDocumentTypeNo IS NULL AND DocumentTypeNo IS NULL) OR DocumentTypeNo = @nDocumentTypeNo) AND ((@nDocumentFormat IS NULL AND DocumentFormatNo IS NULL) OR DocumentFormatNo = @nDocumentFormat) AND ProtocolSettingNo = 307 END ELSE BEGIN INSERT INTO ProtocolSettings (ProtocolSettingNo, MemberID, PartnerID, DocumentTypeNo, DocumentFormatNo, SettingValue) VALUES(307, @nMemberID, @nPartnerID, @nDocumentTypeNo, @nDocumentFormat, @sEmailAddress) END
If this is the wrong place for this question, would someone please tell me so. I am new to SQL Server and still feeling out resources. I have a few books on SQL Server but none cover this question.
I have a text file of dates and numbers that I want to insert into a table. There are way too many rows of data in the file to do this by hand.
Question == How can I essentially insert the text file into my table?
I am trying to find a convenient way to export parts of tables to text files.
One way I see is BCP: Is there a way to avoid writing the command and options into the command prompt by hand? I.e. a way to write the commands into a text file and then to execute them?
Are there other ways? I`d like to find a way that a user who uses a web interface can use.
Is there a way to send the text files via mail to a remote user?
Hi, I just started using SQL Server 2005 and I'm trying to find out how to do a sql dump on a table, but this is proving more challenging then it should be.
I usually use mysql with a program called navicat, and all you do is right click on the table and select dump... Inserting the data back in is just as simple. I have also used sql server 2000 awhile back and I know there was a dumping utility for it.
Can someone point me in the right direction on how to dump data to a .sql file and reinsert that data? Thanks!
I am new to ssis. I try to create a package completely by vb.net to export a table in sql server to text file. i got the following error while i run the package,
An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for ODBC Drivers" Hresult: 0x80004005 Description: "[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified". The AcquireConnection method call to the connection manager "OLEDBSrc" failed with error code 0xC0202009. component "OLE DB Source" (1) failed validation and returned error code 0xC020801C. One or more component failed validation. There were errors during task validation.
i have posted my code below,
Dim pkg As New Package
Dim OLEDBConMgr As ConnectionManager
Dim FileConMgr As ConnectionManager
Dim SrcComponent As IDTSComponentMetaData90
Dim SrcInstance As CManagedComponentWrapper
Dim DesComponent As IDTSComponentMetaData90
Dim DesInstance As CManagedComponentWrapper
pkg.PackageType = DTSPackageType.DTSDesigner90
Dim e As Executable = pkg.Executables.Add("DTS.Pipeline.1")
Dim thMainPipe As TaskHost = e 'as Task Host
Dim DataFlowTask As MainPipe = thMainPipe.InnerObject 'as MainPipe
I have text output files which are semi-structured.(Headers + irregular length tables below)
Is there a simple method of getting them into sql format(line by line) to try and extract data from them?
I know this won't be easy but its been worrying me for a long time. I have a method of importing the data into excel, but although difficult, it must be possible to get a system to get it into sql server. This must be a fairly common issue.
I want to export to a Text File (destination) from a SQL query using a DTS DataPump Task. My query has 28 columns, some how when I try to define the destination columns for my text file the Microsoft Managment Console Crashes completely.
I tough may be my query has two many columns only to find out that it has one to many. If I ramove a column form my query, any column. I get no error at all.
¿Is there a limit to a Text File destination connection?
While importing into sql server 2000 from a text file i am getting an error message like not enough disk space available to perform this operation but there is enough space (around 18gb). Please advice why this is happenning as my work is stuck
Hi everyone I have a directory that contains a lot of text files that have data I need to draw from. I want to know if it is possible to write a program that will read all of the text files in the directory and pull out data and save it to a new textfile. For example: Each text file is formatted this wayColumn1, Column2, Column3"1","xxxx","yyyy""2", "xxxx", "yyyy""3", "XXXX", "yyyy" I want to put all lines that begin with 1 in one text file, all the lines that begin with two in another text file, and the same with all lines that begin with 3. my problem is I want to be able to point at the folder that contains those files and have it read every text file in the folder and perform the operation. If this is possible can someone point me in the right direction on how to get started.Thank you for any help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
