Error When Getting Data From The Database. VWDE/SQL/Asp.Net/C#
Jun 18, 2007
I get the error:
Index out of range exception was unhandled by user code.
At the line:
Label4.Text += reader["RelativeLN"].ToString();
The two lines above it:
Label4.Text += reader["Relation"].ToString() + ": ";
Label4.Text += reader["RelativeFN"].ToString();
will read just fine if I comment out that third line. I don't
understand why this could be happening. There is data in the db for the
RelativeLN column and it has the same data type as the previous two
columns.
private void getRelatives()
{
//Define database connection
SqlConnection conn = new SqlConnection(
"Server=localhost\SqlExpress;Database=MyDB;" + "Integrated Security=True");
//Create command
SqlCommand comm = new SqlCommand("SELECT Relation, RelativeFN FROM
RelativeTable WHERE RelativeTable.UserID IN (SELECT UserID FROM UsrTbl
WHERE UserName = @usrnmeLbl)", conn);
comm.Parameters.AddWithValue("@usrnmeLbl", usrNmeLbl.Text);
conn.Open();
SqlDataReader reader = comm.ExecuteReader();
while (reader.Read())
{
Label4.Text += reader["Relation"].ToString() + ": ";
Label4.Text += reader["RelativeFN"].ToString();
Label4.Text += reader["RelativeLN"].ToString();
}
}
I'm hoping someone can provide me some info on what could possibly be going wrong.
Thank you so much in advance.
View 2 Replies
ADVERTISEMENT
Apr 9, 2007
Hello, As the heading states, I'd like to copy a database table from VWDE over to SQL SME, where it'll replace its namesake. I've tried the 'attach' method but was denied due to server permissions. Is there another way of doing this, or will I have to delete the database and then run a script to reinstate (annoyingly convoluted)? This would be so much easier if the host supported SQL 2005 Express. Thanks in advance
View 2 Replies
View Related
Jan 15, 2007
I've set up a website on another computer using sql server express and visual web developer express, and it works as expected. However halfway through the development i've had to move to another computer. I installed visual web developer express + sql server express, and copied the project files across, but now when I attempt to run it I get the error:Failed to generate a user instance of SQL Server due to a
failure in starting the process for the user instance. The connection
will be closed. I've tried reinstalling the software and it doesn't help. Any idea why this is happening, and what I can do to fix it?thanks
View 3 Replies
View Related
Oct 15, 2006
my requirment is insert TableName and JourneyDate and FlightNumber alongwith otherdata at RunTime but i get error, I tried it several times. Table Structure is: Create Table HA142
(
JourneyDate DateTime primary key,
FlightNo char(5)not null FOREIGN kEY REFERENCES FLIGHTS(FlightNo),
FirstClassSeatAvalable int,
BusinessClassSeatAvalable int,
EconomyClassSeatAvalable int,
FsWaitingAvalable int,
BsWaitingAvalable int,
EcWaitingAvalable int
) string flightno = drpFlightNo.SelectedItem.Text;
string JourneyDate = Session["JourneyDate"].ToString();
string newStrign = ",18,42,280,3,7,35)";
SqlConnection myConn = new SqlConnection("workstation id=JASIM;packet size=4096;user id=ASPNET;data source=JASIM;persist security info=False;initial catalog=Test");
SqlCommand populateFlightTable = new SqlCommand("INSERT INTO "+flightno+" VALUES("+JourneyDate+","+flightno+newStrign,myConn);
myConn.Open();
populateFlightTable.ExecuteNonQuery();
myConn.Close(); whenever compiler reached to populateFlightTable.ExecuteNonQuery(); I received error. i tried it to rectify several times but no result.plz hemp me...
View 3 Replies
View Related
Feb 22, 2007
Hi,I'm using VS2005 and I'm trying to link the C# windows form to MSSQL.I used BindingNavigator Control to read the data. After that I addsqlcommand and sqldataadapter to send the data to the database. Mycode is thissqlDataAdapter1. InsertCommand. CommandText ="INSERT INTO SUDENT (" +"S_ID, S_NAME, S_ADDRESS, S_PHONE" +") VALUES ('" +S_IDComboBox. Text + "', '" +S_NAMETextBox. Text + "', '" +S_ADDRESSTextBox. Text + "', '" +S_PHONETextBox. Text + "')";sqlDataAdapter1. InsertCommand. ExecuteNonQuery( );It gave me this error"NulleferenceExcept ion was Unhandled"and " Object refrence not set toan instance of an object" so I add this linesqlCommand1 = ("INSERT INTO STUDENT (S_ID,S_NAME, S_ADDRESS, S_PHONE)VALUES (@S_ID,@S_NAME, @S_ADDRESS, @S_PHONE) " ,sqlConnection1) ;Then it gave me some stupid error. By the way it didn't make a newobject of SqlCommand although I tired ....So can u help me to solve my problem ? Thank you
View 1 Replies
View Related
Feb 22, 2007
Hi,
I€™m using VS2005 and I€™m trying to link the C# windows form to MSSQL. I used BindingNavigator Control to read the data. After that I add sqlcommand and sqldataadapter to send the data to the database. My code is this
sqlDataAdapter1.InsertCommand.CommandText =
"INSERT INTO SUDENT (" +
"S_ID, S_NAME, S_ADDRESS, S_PHONE" +
") VALUES ('" +
S_IDComboBox.Text + "', '" +
S_NAMETextBox.Text + "', '" +
S_ADDRESSTextBox.Text + "', '" +
S_PHONETextBox.Text + "')";
sqlDataAdapter1.InsertCommand.ExecuteNonQuery();
It gave me this error
€œNulleferenceException was Unhandled€?and €œ Object refrence not set to an instance of an object€? so I add this line
sqlCommand1 = ("INSERT INTO STUDENT (S_ID,S_NAME,S_ADDRESS,S_PHONE) VALUES (@S_ID,@S_NAME,@S_ADDRESS,@S_PHONE)" ,sqlConnection1);
Then it gave me some stupid error. By the way it didn€™t make a new object of SqlCommand although I tried €¦.
So can u help me to solve my problem ? Thank you
View 4 Replies
View Related
Jan 5, 2008
Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately. Compiler Error Message: BC30456: 'InserParameters' is not a member of 'System.Web.UI.WebControls.SqlDataSource'.Source Error:
Line 15: registrationDataSource.InsertCommand = "INSERT TO Reputation (firstname, lastname)VALUES(@First Name, @Last Name)"
Line 16:
Line 17: registrationDataSource.InserParameters.Add("firstname", firstname.txt)
Line 18: registrationDataSource.InserParameters.Add("lastname", lastname.txt)
Line 19: Source File: C:UsersQaiphyx
eputationDefault.aspx.vb Line: 17
Show Detailed Compiler Output:
View 1 Replies
View Related
Jan 1, 2015
I want to import data from excel (1.2 million rows in 1 sheet) to SQL Server 2014 database. I am using SQL Server 2014 Import Export Data functionality and getting this error - unexpected unrecoverable error.
3 buttons beside it - abort, retry, ignore - all having the import export to close.
But I could successfully import data from excel file having less rows (150000 rows)
View 1 Replies
View Related
Jul 26, 2006
When copying data to a remote SQL2K5 destination from a SQL2K5 source database, both using mixed sql server security mode, my job generates the following error:
[Transfer SQL Server Objects Task] Error: Execution failed with the following error: "Cannot apply value null to property Login: Value cannot be null..".
This occurs after the destination database tables have been truncated and replacement data from the source would begin to copy.
The same process can be successfully completed from the Management studio with a simple data export process. However, when I run the saved package again from the BI interface, I get this error.
My search engine searches have yielded numerous hits of others having the same problem with one microsoft rep indicating it was a bug and would be resolved in sp1. I am working with sp1. Oddly, there is only mention of this in the forums. No KB article from MS addresses the problem and I do not see it addressed elsewhere at sqlservercentral.
It appears that others have switched to Integrated Security and resolved the problem. However, I do not have that option with a remotely hosted database.
Does anyone have any information concerning this problem?
View 1 Replies
View Related
Mar 29, 2006
Hi,
I have a problem loading data from a flat file into a DB2 Dtabase by using the OLE DB Provider for DB2.
I read the data from a flat file in the unicode format and as soon as the data is to be written in the DB2 database the following error occurs and the loading process is aborted:
Information: 0x402090DE at Data Flow Task, Flat File Source [813]: The total number of data rows processed for file "C:Dokumente und EinstellungenAdministratorDesktopSSIS1.txt" is 2.
Error: 0xC0202009 at Data Flow Task, OLE DB Destination [842]: An OLE DB error has occurred. Error code: 0x80040E53.
Error: 0xC0047022 at Data Flow Task, DTS.Pipeline: The ProcessInput method on component "OLE DB Destination" (842) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0202009.
Information: 0x40043008 at Data Flow Task, DTS.Pipeline: Post Execute phase is beginning.......
......Warning: 0x80019002 at Package: The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package 1.dtsx" finished: Failure.
I dont know waht those error codes meanand I tried so many things already. The tables in the database are created correctly and also, SSIS can read the data from the database if I use the preview function, but somehow, the program never starts to write data into the database for some reason. Can anyone help me???
Thx, andy
View 3 Replies
View Related
Mar 29, 2006
Hi,
I have a problem loading data from a flat file into a DB2 Dtabase by using the OLE DB Provider for DB2.
I read the data from a flat file in the unicode format and as soon as the data is to be written in the DB2 database the following error occurs and the loading process is aborted:
Information: 0x402090DE at Data Flow Task, Flat File Source [813]: The total number of data rows processed for file "C:Dokumente und EinstellungenAdministratorDesktopSSIS1.txt" is 2.
Error: 0xC0202009 at Data Flow Task, OLE DB Destination [842]: An OLE DB error has occurred. Error code: 0x80040E53.
Error: 0xC0047022 at Data Flow Task, DTS.Pipeline: The ProcessInput method on component "OLE DB Destination" (842) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0202009.
Information: 0x40043008 at Data Flow Task, DTS.Pipeline: Post Execute phase is beginning.......
......Warning: 0x80019002 at Package: The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package 1.dtsx" finished: Failure.
I dont know waht those error codes meanand I tried so many things already. The tables in the database are created correctly and also, SSIS can read the data from the database if I use the preview function, but somehow, the program never starts to write data into the database for some reason. Can anyone help me???
Thx, andy
View 2 Replies
View Related
Aug 31, 2015
I'm having an issue to restoring database from prod to report server. I'm getting following error.
When I did Manually I got first error as below.
Msg 233, Level 20, State 0, Line 0 A transport-level error has occurred when sending the request to the server. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)
This is the second error
Msg 3044, Level 16, State 1, Line 37
Invalid zero-length device name. Reissue thestatement with a valid device name.
Msg 3013, Level 16, State 1, Line 37
RESTORE DATABASE is terminating abnormally.
Msg 5011, Level 14, State 5, Line 45
User does not have permission to alter database 'XeP', the database does not exist, or the database is not in a state that allows access checks.
Msg 5069, Level 16, State 1, Line 45
ALTER DATABASE statement failed.
Script Which I used.
USE Master;
GOÂ
SET NOCOUNT ON
-- 1 - Variable declaration
DECLARE @dbName sysname
DECLARE @backupPath NVARCHAR(500)
[Code] .....
View 26 Replies
View Related
Dec 13, 2007
Hi,
I am running dts in Sql Server 2005 management studio from Management, Legacy and data Transformation Services.
Once the dts has run, I get this error message "Error Source : Microsoft Data Transformation Services (DTS) Package Error Description : Error accessing Windows Event Log."
Please help me
thanks in advance
Srinivas
View 1 Replies
View Related
Jan 16, 2008
internal error: HTTP header information is either corrupted or missing in the transport message. It could be a network transmission error or an IIS problem.(28035).
Any one of you have any suggestions??
View 1 Replies
View Related
Jan 5, 2002
Hi,
We have a production SQLServer 6.5 running with service pack SP5a update:
I got the following 2 errors.....
1.
Error : 806, Severity: 21, State: 1
Could not find virtual page for logical page 67833121 in database 'tempdb' database 'tempdb'
2.
I got error when I ran a job for Update statistics
Error : 614, Severity: 21, State: 3
A row on page 2697653 was accessed that has an illegal length of -8631 in database 'abc'.
For Error 2: I ran update statistics using query analyser. It is fine
Is there anything I have to do further?
For Error 1 : The work around given by Microsoft
=================================================
I ran
DBCC CHECKTABLE(syslogs)
I am getting the following message on :
master:
Checking syslogs
The total number of data pages in this table is 1.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 11 data rows.
DBCC execution completed. If DBCC printed error messages, see your System Administrator.
model:
Checking syslogs
The total number of data pages in this table is 47.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 532 data rows.
DBCC execution completed. If DBCC printed error messages, see your System Administrator.
tempdb:
Checking syslogs
The total number of data pages in this table is 1.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 31 data rows.
DBCC execution completed. If DBCC printed error messages, see your System Administrator.
I ran dbcc checkdb on master,model and tempdb . Still I get the same problem.
for tempdb:
Checking 8
The total number of data pages in this table is 1.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 19 data rows.
for master:
Checking 8
The total number of data pages in this table is 1.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 27 data rows.
for model:
Checking 8
The total number of data pages in this table is 47.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 532 data rows.
All system databases and userdatabase recovered successfully when I restarted sqlserver.
Please advice how to get rid of this problem.
Thanks in advance,
Anu
View 4 Replies
View Related
May 10, 2007
I have tired for this!
When I use SSIS for extract data from ssas, that means,I use mdx query.
then random error occured.
Hope some one can understand my poor English....
And the Error Info show below.
Code Snippet
Error: 0xC0202009 at Data Flow Task - For Individual User Tech Points, OLE DB Source 1 1 [31]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E05.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Analysis Services 2005" Hresult: 0x00000001 Description: "Error Code = 0x80040E05, External Code = 0x00000000:.".
Error: 0xC004701A at Data Flow Task - For Individual User Tech Points, DTS.Pipeline: component "OLE DB Source 1 1" (31) failed the pre-execute phase and returned error code 0xC0202009.
View 6 Replies
View Related
Mar 22, 2007
$exception {"Arithmetic overflow error converting expression to data type smalldatetime.
The statement has been terminated."} System.Exception {System.Data.SqlClient.SqlException}
occurs
here is my code
protected void EmailSubmitBtn_Click(object sender, EventArgs e)
{
SqlDataSource NewsletterSqlDataSource = new SqlDataSource();
NewsletterSqlDataSource.ConnectionString = ConfigurationManager.ConnectionStrings["NewsletterConnectionString"].ToString();
//Text version
NewsletterSqlDataSource.InsertCommandType = SqlDataSourceCommandType.Text;
NewsletterSqlDataSource.InsertCommand = "INSERT INTO NewsLetter (EmailAddress, IPAddress, DateTimeStamp) VALUES (@EmailAddress, @IPAddress, @DateTimeStamp)";
//storeprocedure version
//NewsletterSqlDataSource.InsertCommandType = SqlDataSourceCommandType.StoredProcedure;
//NewsletterSqlDataSource.InsertCommand = "EmailInsert";
NewsletterSqlDataSource.InsertParameters.Add("EmailAddress", EmailTb.Text);
NewsletterSqlDataSource.InsertParameters.Add("IPAddress", Request.UserHostAddress.ToString());
NewsletterSqlDataSource.InsertParameters.Add("DateTimeStamp", DateTime.Now.ToString());
int rowsAffected = 0;
try
{
rowsAffected = NewsletterSqlDataSource.Insert();
}
catch (Exception ex)
{
Server.Transfer("NewsletterProblem.aspx");
}
finally
{
NewsletterSqlDataSource = null;
}
if (rowsAffected != 1)
{
Server.Transfer("NewsletterProblem.aspx");
}
else
{
Server.Transfer("NewsletterSuccess.aspx");
}
View 3 Replies
View Related
Jun 8, 2007
All,
One of our developers decided to load 2K5 client tools on to their laptop. They cannot connect getting the following error:
....Error: 26 Error Locating the Server/instance specified (.NET SQLClient Data Provider)....
1.) Allowing remote connections IS enabled.
2.) SQL Browser Service is ON
3.) Windows Firewall is NOT running
4.) All protocols (except VIA) are enabled
Others at this office, including myself, can connect fine in Management Studio. Only this one developer cannot.
Any thoughts and/or help would be much appreciated. I think that the problem has something to do with the first sentance above but I am not positive.
Thanks in advance,
DBA Ben
View 4 Replies
View Related
Jan 7, 2008
Hello,
I am applying hourly differential backup to the backup server from production with the following command. This command makes the database on standby server into read only mode.
RESTORE DATABASE ARSYSTEM FROM DISK = 'E:SQL backup from productionsql_full_backup'
WITH MOVE 'arsystem' TO
'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
STANDBY = 'E:SQL backup from productionSQL daily diff back up'
Now I want to run a command which will put the database in write mode. I have created a job which would make the datbase Write mode. This job runs successfully sometimes and fails sometimes. I need to ensure that the job always succeeds. When it fails, how do I troubleshoot and what is the possible fix?
Thanks in advance.
The error message is
Cannot apply the backup on device 'E:SQL backup from productionSQL daily diff back up' to database 'ARSYSTEM'. [SQLSTATE 42000] (Error 3136) RESTORE DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013). The step failed.
The steps for the job are as follows with the failing step highlighted in bold.
copy /y "\172.31.9.12Remedy BackupackupSQL backupsql_full_backup" "E:SQL backup from productionsql_full_backup"
copy /y "\172.31.9.12Remedy BackupackupSQL backupSQL daily diff back up" "E:SQL backup from productionSQL daily diff back up"
xp_cmdshell 'net stop "bmc remedy action request system server"'
exec rp_kill_db_processes 'ARSYSTEM'
RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionsql_full_backup'
WITH
MOVE 'arsystem' TO 'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
NORECOVERY
Failing step
RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionSQL daily diff back up'
WITH
MOVE 'arsystem' TO 'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
RECOVERY
xp_cmdshell 'del /f "E:SQL backup from productionsql_full_backup"'
xp_cmdshell 'del /f "E:SQL backup from productionsql daily diff back up"'
xp_cmdshell 'net start "bmc remedy action request system server"'
I have scheduled the following hourly diffential restore job too which never fails.
RESTORE DATABASE ARSYSTEM FROM DISK = 'E:SQL backup from productionsql_full_backup'
WITH MOVE 'arsystem' TO
'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
STANDBY = 'E:SQL backup from productionSQL daily diff back up'
EXEC MASTER..XP_CMDSHELL 'del /f "E:SQL backup from productionSQL daily diff back up"'
View 12 Replies
View Related
Apr 20, 2007
Hi, all
I'm getting this error at runtime when my page tries to populate a datagrid. Here's the relevant code.
First, the user selects his choice from a dropdownlist, populated with a sqldatasource control on the aspx side:<asp:SqlDataSource ID="sqlDataSourceCompany" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
SelectCommand="SELECT [PayrollCompanyID], [DisplayName] FROM [rsrc_PayrollCompany] ORDER BY [DisplayName]">
</asp:SqlDataSource>
And the dropdown list's code:<asp:DropDownList ID="ddlPayrollCompany" runat="server" AutoPostBack="True" DataSourceID="sqlDataSourcePayrollCompany"
DataTextField="DisplayName" DataValueField="PayrollCompanyID">
</asp:DropDownList>
Then, I use the selectedindexchanged event to bind the data to the datagrid. Here's that code:
1 Sub BindData()
2
3 Dim ds As New DataSet
4 Dim sda As SqlClient.SqlDataAdapter
5 Dim strSQL As String
6 Dim strCon As String
7
8 strSQL = "SELECT [SocialSecurityNumber], [Prefix], [FirstName], [LastName], [HireDate], [PayrollCostPercent], " & _
9 "[Phone], [BadgeNumber], [IsSupervisor], [SupervisorID], [IsUser], [IsScout] FROM [rsrc_Personnel] " & _
10 "WHERE ([PayrollCompanyID] = @PayrollCompanyID)"
11
12 strCon = "Data Source=DATASOURCE;Initial Catalog=DATABASE;User ID=USERID;Password=PASSWORD"
13
14 sda = New SqlClient.SqlDataAdapter(strSQL, strCon)
15
16 sda.SelectCommand.Parameters.Add(New SqlClient.SqlParameter("@PayrollCompanyID", Me.ddlPayrollCompany.SelectedItem.ToString()))
17
18 sda.Fill(ds, "rsrc_Personnel")
19
20 dgPersonnel.DataSource = ds.Tables("rsrc_Personnel")
21 dgPersonnel.DataBind()
22
23 End Sub
24
I'm assuming my problem lies in line 16 of the above code. I've tried SelectedItemIndex, SelectedItemValue too and get errors for those, as well.
What am I missing?
Thanks for anyone's help!
Cappela07
View 2 Replies
View Related
Feb 12, 2005
I am trying to create a page that adds users to a MS SQL database. In doing so, I have run into a couple errors that I can't seem to get past. I am hoping that I could get some assistance with them.
Error from SQL Debug:
---
Server: Msg 295, Level 16, State 3, Procedure AdminAddUser, Line 65
[Microsoft][ODBC SQL Server Driver][SQL Server]Syntax error converting character string to smalldatetime data type.
---
Error from page execution:
---
Exception Details: System.Data.OleDb.OleDbException: Error converting data type varchar to numeric.
Source Error:
Line 77: cmd.Parameters.Add( "@zip", OleDbType.VarChar, 100 ).Value = Request.Form("userZip")
Line 78:
Line 79: cmd.ExecuteNonQuery()
---
Below is what I currently have for my stored procedure and the pertinent code from the page itself.
Stored Procedure:
---
CREATE PROCEDURE dbo.AdminAddUser( @username varchar(100),
@password varchar(100),
@email varchar(100),
@acct_type varchar(100),
@realname varchar(100),
@billname varchar(100),
@addr1 varchar(100),
@addr2 varchar(100),
@city varchar(100),
@state varchar(100),
@country varchar(100),
@zip varchar(100),
@memo varchar(100) )
AS
BEGIN TRAN
--
-- Returns 1 if successful
-- 2 if username already exists
-- 0 if there was an error adding the user
--
SET NOCOUNT ON
DECLARE @error int, @rowcount int
--
-- Make sure that there isn't already a user with this username
--
SELECT userID
FROM users
WHERE username=@username
SELECT @error = @@ERROR, @rowcount = @@ROWCOUNT
IF @error <> 0 OR @rowcount > 0 BEGIN
ROLLBACK TRAN
RETURN 2
END
--
-- Set expiration date
--
DECLARE @expDate AS smalldatetime
IF @acct_type = "new_1yr" BEGIN
SET @expDate = DATEADD( yyyy, 1, GETDATE() )
END
IF @acct_type = "new_life" BEGIN
SET @expDate = DATEADD( yyyy, 40, GETDATE() )
END
DECLARE @paidCopies AS decimal
SET @paidCopies = 5
--
-- Add this user to the database
--
IF @acct_type <> "new" BEGIN
INSERT INTO users (userName, userPassword, userEmail, userJoinDate,
userPaidCopies, userExpirationDate, userLastPaidDate,
userBname, userRealName, userAddr1, userAddr2, userCity,
userState, userCountry, userZip, userMemo )
VALUES (@username, @password, @email, GETDATE(), @realname, @billname,
@paidCopies, @expDate, GETDATE(), @addr1, @addr2, @city, @state, @country, @zip, @memo )
SELECT @error = @@ERROR, @rowcount = @@ROWCOUNT
IF @error <> 0 OR @rowcount < 1 BEGIN
ROLLBACK TRAN
RETURN 0
END
END
IF @acct_type = "new" BEGIN
INSERT INTO users (userName, userPassword, userEmail, userJoinDate,
userBname, userRealName, userAddr1, userAddr2, userCity,
userState, userCountry, userZip, userMemo )
VALUES (@username, @password, @email, GETDATE(), @realname, @billname,
@addr1, @addr2, @city, @state, @country, @zip, @memo )
SELECT @error = @@ERROR, @rowcount = @@ROWCOUNT
IF @error <> 0 OR @rowcount < 1 BEGIN
ROLLBACK TRAN
RETURN 0
END
END
COMMIT TRAN
RETURN 1
GO
---
Page Code:
---
Sub AddUser(Sender as Object, e as EventArgs)
Dim db_conn_str As String
Dim db_conn As OleDbConnection
Dim resultAs Int32
Dim cmdAs OleDbCommand
db_conn_str = "Provider=SQLOLEDB;Data Source=localhost;Initial Catalog=xxxxx; User ID=xxxxx; PWD=xxxxx;"
db_conn = New OleDbConnection( db_conn_str )
db_conn.Open()
cmd = new OleDbCommand( "AdminAddUser", db_conn )
cmd.CommandType = CommandType.StoredProcedure
cmd.Parameters.Add( "result", OleDbType.Integer ).Direction = ParameterDirection.ReturnValue
cmd.Parameters.Add( "@username", OleDbType.VarChar, 100 ).Value = Request.Form("userName")
cmd.Parameters.Add( "@password", OleDbType.VarChar, 100 ).Value = Request.Form("userPass")
cmd.Parameters.Add( "@email", OleDbType.VarChar, 100 ).Value = Request.Form("userEmail")
cmd.Parameters.Add( "@acct_type", OleDbType.VarChar, 100 ).Value = Request.Form("userEmail")
cmd.Parameters.Add( "@realname", OleDbType.VarChar, 100 ).Value = Request.Form("userRealName")
cmd.Parameters.Add( "@billname", OleDbType.VarChar, 100 ).Value = Request.Form("userBname")
cmd.Parameters.Add( "@addr1", OleDbType.VarChar, 100 ).Value = Request.Form("userAddr1")
cmd.Parameters.Add( "@addr2", OleDbType.VarChar, 100 ).Value = Request.Form("userAddr2")
cmd.Parameters.Add( "@city", OleDbType.VarChar, 100 ).Value = Request.Form("userCity")
cmd.Parameters.Add( "@state", OleDbType.VarChar, 100 ).Value = Request.Form("userState")
cmd.Parameters.Add( "@country", OleDbType.VarChar, 100 ).Value = Request.Form("userCountry")
cmd.Parameters.Add( "@memo", OleDbType.VarChar, 100 ).Value = Request.Form("userMemo")
cmd.Parameters.Add( "@zip", OleDbType.VarChar, 100 ).Value = Request.Form("userZip")
cmd.ExecuteNonQuery()
(...)
---
View 1 Replies
View Related
Nov 20, 2007
Hi.
I am stuck with error: An error occurred while receiving data: '64(error not found)'.
My Service Broker configuration:
Server A initiator,
Server B target.
Server A sends message to Server B, Server B sends back reply.
On this stage I receive problem. Server B message does not come to server A.
It stays on sys.transmission_queue on server B.
This problem occurs only during initial setup. During initial setup, on Server B messages, queues, services, contracts, routes, bindings are created. On Server A: routes and bindings. As a last step, a message is sent to Server B.
So, reply on this message never comes. Initial setup is run using procedure with execute as €˜owner€™, owner=€™dbo€™.
But, whenever I send messages after that, everything works fine.
Any suggestions?
Please :-)
View 7 Replies
View Related
Oct 31, 2007
Hi,
I have set up SB between 2 databases, and I keep geting a variety of error messages in the queue on both sides. The first is:
An error occurred while receiving data: '10054(error not found)'.
And on the other side its
Service Broker received an error message on this conversation. Service Broker will not transmit the message; it will be held until the application ends the conversation.
The only difference between this and the tutorials is that the TCP port have been moved to 4321 instead of 4022, and this has been done both sides, because something else was blocking the 4022 port. This one is definately free on both sides. I have recreated the certificates, the users, the end points, the queues and the services multiple times, and checked them all in the sys.routes etc and they all seem fine.
I do also get a message in the queue that I can receive sometimes that tells me I don't have rights to the service on the other machine. I can send a message to itself and it doesn't complain.
Both machines are on the same domain, and I have also tried to grant rights to public to no avail.
Help!
TIA
Ian.
View 2 Replies
View Related
Feb 17, 2007
Cn not do anything with my sql server, everything i trt to do i get this message, user does not have permision, etc, ,
I am running windows Vista Business, SQL SERVER 2005
so what going on here
View 23 Replies
View Related
Jun 21, 2007
I'am doing functionality test on DTS packages and saving my DTS packages to meta data services instead of saving them as local packages. We would like to see what information would be provided by saving them this way, but when we try to open the meta data browser (the 3rd icon under DTS) we get the following error:
An error occurred while trying to access the database information. The msdb database could not be opened.
View 3 Replies
View Related
Feb 1, 2007
got rid of my error about user login rights, it was all working yesterday. but for some reason i now get this error CREATE DATABASE permission denied in database 'master'.
An attempt to attach an auto-named database for file C:InetpubwwwrootsqlSiteApp_DatasiteDB.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: CREATE DATABASE permission denied in database 'master'.
An attempt to attach an auto-named database for file C:InetpubwwwrootsqlSiteApp_DatasiteDB.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): CREATE DATABASE permission denied in database 'master'.
An attempt to attach an auto-named database for file C:InetpubwwwrootsqlSiteApp_DatasiteDB.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +734995
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1838
System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +33
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +628
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +359
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +121
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +137
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +83
System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1770
System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +17
System.Web.UI.WebControls.DataBoundControl.PerformSelect() +149
System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70
System.Web.UI.WebControls.GridView.DataBind() +4
System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82
System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +69
System.Web.UI.Control.EnsureChildControls() +87
System.Web.UI.Control.PreRenderRecursiveInternal() +41
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1360
i have this in my web.config file <connectionStrings> <add name="ConnectionStringTest" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=C:InetpubwwwrootsqlSiteApp_DatasiteDB.mdf;Integrated Security=SSPI;Connect Timeout=30;User Instance=False" providerName="System.Data.SqlClient" /> </connectionStrings> <appSettings /> <system.web> <!-- Set compilation debug="true" to insert debugging symbols into the compiled page. Because this affects performance, set this value to true only during development. --> <compilation debug="true" /> <identity impersonate="true"/> and my asp connection string is <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionStringTest %>" SelectCommand="SELECT [entryID], [compID], [emailAddy], [answer] FROM [entry]"></asp:SqlDataSource> if i set user instance to true i get a user permission error. it says on sql server management that i have dbo rights on my database, but it wont let me put datareader or write on this login. any ideas? its driving me insane
View 4 Replies
View Related
Oct 4, 2006
Hi there,
I got this error when i tried to attach the adventureworks database and SSIS training database.
an exception occurred while executing a transact-sql statement or batch
(microsoft.sqlserver.connectioninfo)
could not find row in sysindexes for database ID 17, object ID 1, index ID 1. Run DBCC
checktable on sysindexes.
I join join a network domain for my computer. Previously it doesnt have this problem.
View 1 Replies
View Related
Aug 23, 2007
We are using Service Broker to synchronise two databases using async triggers (using a middle server to preform data mapping processing). We are re-using dialogs as we want to ensure order when sending messages which contain the data to be synced. A dialog is created between each intiator and target service (there are 3 of each) which is kept open indefinately (we are only ending conversation upon receiving an end conversation message or error message).
We seem to get it working for a period then after about 1 hour it seems to stop sending and we see the following error in SQL Profiler:
An error occurred while receiving data: '64(error not found)'
Any ideas what could be causing this? We do not see any errors or end conversations. It seems to happen at irregular points.
View 2 Replies
View Related
Apr 16, 2008
Hi all, i got this error:
[DTS.Pipeline] Error: "component "Excel Source" (1)" failed validation and returned validation status "VS_NEEDSNEWMETADATA".
and also this:
[Excel Source [1]] Warning: The external metadata column collection is out of synchronization with the data source columns. The column "Fiscal Week" needs to be updated in the external metadata column collection. The column "Fiscal Year" needs to be updated in the external metadata column collection. The column "1st level" needs to be added to the external metadata column collection. The column "2nd level" needs to be added to the external metadata column collection. The column "3rd level" needs to be added to the external metadata column collection. The "external metadata column "1st Level" (16745)" needs to be removed from the external metadata column collection. The "external metadata column "3rd Level" (16609)" needs to be removed from the external metadata column collection. The "external metadata column "2nd Level" (16272)" needs to be removed from the external metadata column collection.
I tried going data flow->excel connection->advanced editor for excel source-> input and output properties and tried to refresh the columns affected.
It seems that somehow the 3 columns are not read in from the source file?
ans alslo fiscal year, fiscal week is not set up up properly in my data destination?
anyone faced such errors before?
Thanks
View 13 Replies
View Related
Jul 24, 2015
When I execute the below stored procedure I get the error that "Arithmetic overflow error converting expression to data type int".
USE [FileSharing]
GO
/****** Object: StoredProcedure [dbo].[xlaAFSsp_reports] Script Date: 24.07.2015 17:04:10 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
[Code] .....
Msg 8115, Level 16, State 2, Procedure xlaAFSsp_reports, Line 25
Arithmetic overflow error converting expression to data type int.
The statement has been terminated.
(1 row(s) affected)
View 10 Replies
View Related
Feb 23, 2008
RE: XML Data source .. Expression? Variable? Connection? Error: unable to read the XML data.
I want my XML Data source to be an expression as i will be looping through a directory of xml files.
I don't see the expression property or the connection property??
I tried setting the XMLData property to @[User::filename], but that results in:
Information: 0x40043006 at Load XML Files, DTS.Pipeline: Prepare for Execute phase is beginning.
Error: 0xC02090D0 at Load XML Files, XML Source [108]: The component "XML Source" (108) was unable to read the XML data.
Error: 0xC0047019 at Load XML Files, DTS.Pipeline: component "XML Source" (108) failed the prepare phase and returned error code 0xC02090D0.
Information: 0x4004300B at Load XML Files, DTS.Pipeline: "component "OLE DB Destination" (341)" wrote 0 rows.
Task failed: Load XML Files
Information: 0xC002F30E at Bad, File System Task: File or directory "d:jcpxmlLoadjcp2.xml.bad" was deleted.
Warning: 0x80019002 at Package: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package.dtsx" finished: Failure.
The program '[3312] Package.dtsx: DTS' has exited with code 0 (0x0).
Thanks for any help or information.
View 3 Replies
View Related