I am not able to create connection string through vwd express for sql express database file n getting a error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
plz tell me where is the problem n how can i resolve it
Is there a way by which we can make the Connection in the connection manager retry for a certain amount of time?
I have a DataFlow Task which uses a OLE Source which is connected to a database. there are time when the connection to the database is not available due to some transport level error. so i wanted the connection manger to make a couple of tries before giving up and saying that it was not able to connect and it timed out..
i have the Connect TimeOut and the General Timeout properties set to 0, but is there a way to retry?
Hi all, i'm making a webpage via the walkthrough of webmatrix. I use the tutorial 'Build an End-to-End Application (with C#.NET) '. The problem is that this tutorial works with an access db. I'll try to start the same thing but using an sql server.
Nowhere i can't find (because i don't look at the right place i gess) how i have to make a sqlconnection via webmatrix with c# using a keyfield to filter my data and to fill out a datagrid.
VWD 2005 Express. Visual Basic. Sql Server 2005. I am trying to establish a connection to a SQL database. The connection (and all other database reads and writes) work fine in debug and in "view in browser" from VWD. I am running the VWD on the same server that hosts the site. When on my server (Windows 2003 Server) under IIS, the connection attempt times out. Below is the code that is failing (only on the server when deployed): Private Shared Sub OpenConn(ByVal cmd As SqlCommand, ByVal Success As Boolean) Dim conn As New SqlConnection(System.Configuration.ConfigurationManager.ConnectionStrings("GoodNews_IntranetConnectionString").ToString) 'The connection string resolves to ("Data Source=HQSERVERHQSERVER;Initial Catalog=GoodNews_Intranet;Integrated Security=True" Try conn.Open() cmd.Connection = conn Success = TrueCatch ex As Exception Success = False End Try End Sub
Hi everybody I have installed SqlServer 2005 on my server but my Windows application on the client computers should connect to server via ODBC connection so what should i install on the client computers (that don't have any sql server installed) to enable them to connect? When i want to create ODBC connection on client computers through (Control panelAdministrative ToolsData Sources) i don't see SQL-Server 2005 ODBC driver in the list ....could anyone help me? Kind Regards.
I have packages that must generate log errors dynamically including time of execution and the name of the task.
I make it changing the properties of the connection inserting two expressions.
1.-I alter the File Usage Type to 1 to generate this files. 2.- I alter the connection string as: @[User::myvariable] +"constant_description"+ time description+ +".txt"
The time description is : (DT_STR,40,1252) DAY (GETDATE())+"-"+(DT_STR,40,1252) MONTH( GETDATE())+"-"+(DT_STR,40,1252) YEAR( GETDATE())+" + REPLACE( (DT_STR,10,1252) (DT_DBTIME) GETDATE(),":","_") But it is not the problem
In those packages I have one connector for all the tasks and in execution time it creates one file for each of the tasks.
The problem is the way I insert in the filename the task name.
I have a pre-execute event handler in each task that modifies a string variable( myvariable) appending the task name. When I execute de package it works great but when I only execute a task, the program do not enter in the event and do not put the task’s name.
How can I put that name without using that handler? There is another handler can I use to do it that happens before the system generates the new file name and after pre-execute? Anyone knows another way to do this kind of things?
Hi, I have installed on my laptop SQL server 2005 Developer edition, I can change ANY of the settings of the SQL server and OS.
I am writing code with a team using continuous integration where the connection string is the following: "Provider=SQLNCLI;Server=.SQLEXPRESS;Database=Secret;Trusted_Connection=Yes;"
is there a way (create an alias,rename server, other?) to make my local dev SQL server accept the connection string above, as at the moment I have to rename the connection string every time before checking in code and after downloading the latest version from the code repository.
Label3.Text = command4.Parameters["@UserName"].Value.ToString(); }Exception Details: System.InvalidOperationException: String[1]: the Size property has an invalid size of 0.Line 48: Line 49: conn.Open(); Line 50: command4.ExecuteReader(); Line 51: conn.Close(); and here is my stored procedure ALTER PROCEDURE dbo.myStoredProcedure --
(@ProductID int, @UserName varchar(255) OUTPUT)
AS
SET @UserName = (SELECT UserId FROM Products WHERE ProductID = @ProductID) what is wrong? i never seen that error and i don't know from where could it came from please help me, thanks
Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately. Compiler Error Message: BC30456: 'InserParameters' is not a member of 'System.Web.UI.WebControls.SqlDataSource'.Source Error:
Line 15: registrationDataSource.InsertCommand = "INSERT TO Reputation (firstname, lastname)VALUES(@First Name, @Last Name)" Line 16: Line 17: registrationDataSource.InserParameters.Add("firstname", firstname.txt) Line 18: registrationDataSource.InserParameters.Add("lastname", lastname.txt) Line 19: Source File: C:UsersQaiphyx eputationDefault.aspx.vb Line: 17 Show Detailed Compiler Output:
I have a table that is fairly large, and I need to make a change to one of the columns in the table. Namely I need to change the datatype and rename that column. When I try to save the updated table, I keep getting a timeout error that says.
'eligibility (dbo)' table - Unable to create index 'PK_eligibility'. Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
Any ideas on how to make the table change more efficient or change the timeout period. I need to keep the existing data in the table. I am using sql server managment studio(2005) connected to a sql server 2000 database.
OLEDB transaction is making difference in my migrated application powerbuilder 10.5 which has new oledb driver which is replaced by MSS driver in previous Powerbuilder version.
1.)I am facing the below error on update/save this was not faced during my previous versino drive MSS in powerbuilder.This is oocure only after the change to oledb driver.
"Row change between retrieve and update.".
in front end of my application the error is poped as "(STD1007) This row has been modified by another user. Save is canceled! ".
Hi,I need some help. I am getting this error after I complete the asp.net register control and click on the continue button. It crashed when it tries to get it calls this Profile property((string)(this.GetPropertyValue("Address1")));When I look at the stack, it is coming from my ProfileWrapper class which adds user address, city, etc.. from a class which inherits fromSystem.Web.Profile.ProfileBase. From the stack, it is calling the System.Web.Profile and crashed when it tries to open a connection atSystem.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject). I already migrated all aspnet_user, aspnet_roles, etc.. and don't get any connection errors. It is only when I try to get the profile data. This works on my pc, but throws an error on my lunarpage website.Any help is greatly appreciated.Thanks,AJAn error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:Line 100: public virtual string Address2 {Line 101: get {Line 102: return ((string)(this.GetPropertyValue("Address2")));Line 103: }Line 104: set {Source File: c:windowsMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files oot 021d50639a6858cApp_Code.54nvluyo.1.cs Line: 102Stack Trace:[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)] System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +435 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84 System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197 System.Web.Profile.SqlProfileProvider.GetPropertyValuesFromDatabase(String userName, SettingsPropertyValueCollection svc) +782 System.Web.Profile.SqlProfileProvider.GetPropertyValues(SettingsContext sc, SettingsPropertyCollection properties) +428 System.Configuration.SettingsBase.GetPropertiesFromProvider(SettingsProvider provider) +404 System.Configuration.SettingsBase.GetPropertyValueByName(String propertyName) +117 System.Configuration.SettingsBase.get_Item(String propertyName) +89 System.Web.Profile.ProfileBase.GetInternal(String propertyName) +36 System.Web.Profile.ProfileBase.get_Item(String propertyName) +68 System.Web.Profile.ProfileBase.GetPropertyValue(String propertyName) +4 ProfileCommon.get_Address2() in c:windowsMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files oot 021d50639a6858cApp_Code.54nvluyo.1.cs:102 ProfileWrapper..ctor() in d:inetpubvhostsjavcentral.comhttpdocsApp_CodeProfileWrapper.cs:242 ProfileDataSource.GetData() in d:inetpubvhostsjavcentral.comhttpdocsApp_CodeProfileDataSource.cs:17[TargetInvocationException: Exception has been thrown by the target of an invocation.] System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) +0 System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) +72 System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks) +308 System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) +29 System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance) +480 System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1960 System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +17 System.Web.UI.WebControls.DataBoundControl.PerformSelect() +149 System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70 System.Web.UI.WebControls.FormView.DataBind() +4 System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82 System.Web.UI.WebControls.FormView.EnsureDataBound() +163 System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +69 System.Web.UI.Control.EnsureChildControls() +87 System.Web.UI.Control.FindControl(String id, Int32 pathOffset) +21 System.Web.UI.Control.FindControl(String id) +9 CustomerDetailsEdit.OnPreRender(EventArgs e) in d:inetpubvhostsjavcentral.comhttpdocsUserControlsCustomerDetailsEdit.ascx.cs:60 System.Web.UI.Control.PreRenderRecursiveInternal() +86 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2041
I am working on SQL Server 2005 (x64) with Windows Server 2003 (x64) operating system. I am having a major issue in SSIS. Here is the detailed explanation of the issue :
I have an EXCEL file in 2003 / 2007 version. It contains some data. I want to import the data using SSIS into SQL Server 2005 (x64) database table. I have taken "EXCEL FILE SOURCE" and "SQL Server DESTINATION". It was failed on importing data. Surprisingly it works fine in SQL Server 2005 (x32). Can you please explain why it is NOT woking on (x64) ?
Here is the error code i am getting:
[Excel Source [1]] Error: The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009.
Hi All, I am getting the following error if I am using the package "Transaction Option=Required" while running through Sql Job: The AcquireConnection method call to the connection manager "<connection name>" failed with error code 0xC0202009.
while I running the SSIS package on BI environment, I am getting the following error: [Connection manager "<connection name>"] Error: The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D00A "Unable to enlist in the transaction.".
I know the alternative solution is to make the "Transaction Option=Supported", but in my case I have run the whole flow in a single transaction. I came to know that this has been fixed in the service pack1(ref. to http://support.microsoft.com/kb/914375). FYI.. some time it was running successful.
I have taken all the necessary step to run the SSIS package in a distributed transaction(like the steps for MSDTC) and also created the package flow in a sequence.
I was going through the link - http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=160340&SiteID=1 but all those didn't solve my problem.
If anyone can help me it will be great. or it is a bug in SSIS?
Problem: ColA (Source) Rounding error to PARTY_NO (Destination) I have a field of text of in a flat file that the flat file connection manager Source picks up correctly €ś70000893€? However when it gets the OLE DB Connection Destination the data has changed to 70000896. That€™s before its even Written to the database. The only clue that something is wrong in the middle is the great Data viewer shows the number as 7.000009E+07 Other clues looking at the data it appears there is a rounding error on only the number that dont end in 00 ColA (Source) PARTY_NO (Destination) 71167300 71167296 70329000 70329000 70410000 70410000 Any ideas people? Thanks in advance Dave
I am working in a distributed environment, I verified msgs have been successfully send from server1 db1 to server2 db2, but I still get the following error msg from the sender server through SQL profile:
Connection attempt failed with error: '10061(No connection could be made because the target machine actively refused it.)'.
Hello, I have a sql 2005 server, and I am a developer, with the database on my own machine. It alwayws works for me but after some minutes the other developer cant work in the application
He got this error
Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: 192.168.1.140]
and When I see the log event after that error, it comes with another error.
SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: 192.168.1.140]
He has IIS5 and me too.
I created a user on the domain called ASPSYS with password, then in the IIS on anonymous authentication I put that user with that password, and it works, on both machines.
I go to the profiler, and I see that when he browses a page, the database is accesed with user ASPSYS, but when I browse a page, the database is accesed with user SElevalencia.
Thats strange.
The only way that the other developer can work again on the project is to restart the whole machine. He has windows xp profession, I have windows 2000.
I am using SSIS 2005 on Windows 2003 server. Using Excel Source to dump the data for staging database. I am getting following error while I execute it through BI studio's execute button.
I have deployed my packages into Sql Server and I am using Configuration File. As my Data Source is Excel, I have changed the connection string during deployment with Server Path. But I am getting the following errors. Actually the File Exist in Path. May I know What is cause of the issue? Do I need to give any permission to execute the package.
SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
component "Excel Source Service Contract Upload" (1) failed validation and returned error code 0xC020801C.
One or more component failed validation.
There were errors during task validation.
DTS_E_OLEDBERROR, Error Code: 0x80004005 Source: "MS JET DB Engine" Description : Path is not valid
I've got a package which reads a text file into a table and updates another. I set up configurations so that I could import it into the SSIS store on both my dev and live servers. Now, I'm getting this error. I tried removing the configs and am still getting it.
I've been through each step and everything looks okay. Does anyone have any idea (a) what's wrong, (b) how to localise the error or (c) get any additional information? Or do I just have to recreate the package from scratch?
Error at PartnerLinkFlatFileImporter: The connection "" is not found. This error is thrown by Connections collection when the specific connection element is not found.
Error at PartnerLinkFlatFileImporter [Log provider "SSIS log provider for SQL Server"]: The connection manager "" is not found. A component failed to find the connection manager in the Connections collection.
Scenario Configuration : VB.net 2005 Code, WebService for Executing SSIS on Server, SSIS deployed on the Database Server
Problem Description : We are developing windows applicaiton in which we call webservice which was deployed on the same server where SSIS packages are deployed. Now from Code we are passing FilePath name in variable and execute the Package. But the SSis result says that The file name "\computernamefol1fol2fol3fol4abc.txt" specified in the connection was not valid.
More Information:
1. Full Permission are given on this network folder. 2. Package executes successfully from SSIS development solution (BIS solution) 3. Deployed packed executes successfully from the Database Server. 4. From Development pc packege executes successfully. 5. Other packages deployed on the same server executed suucessfully with same configuration and scenario.
Only this package is not executing.
-- the only differece with this package with other is -
using ".txt" extension in Flat file connection and using VB Script task
Can any one suggest the appropirate solution for this problem...
I have a web application developed in VS.NET 2005 [using C# as code behind]; and it uses SQL Server 2000 Enterprise edition as backend. The application runs fine, though it gives an error on IRREGULAR intervals on SQL data requests. Error Details: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
My problem is this: 1) Why does it show an error of SQL 2005, while I use SQL 2000. SQL 2005 is not even installed on the server, though VS.NET 2005 is installed. 2) The error comes only at irregular intervals. Users are able to login properly otherwise. 3) Application starts working again if we do either of the following: (a) Restart IIS (b) Restart application pool (c) Restart server. 4) Named pipes and TCP/IP are added to the "Network Configuration" of the SQL server 2000. 5) Error does not come on any specific page; or any specific code; or at any specific time. 6) We do not have any background service or any other activity happening on the server; and the server hosts only this application, within a single virtual root.
Any thoughts on why is this happening, and how to resolve this?
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
hi , i am creating a service broker application between two different instance.when i am initiating a dialog from the source my message remain in the sys.transmission_queue.but its transmission_status column is empty.
i attached the profiler with both source and target by including all the service broker event.
in my source profiler i am getting the error like -- Connection attempt failed with error: '10061(No connection could be made because the target machine actively refused it.)'. with event Broker:connection
and in the target profiler error is --This message could not be delivered because the security context could not be retrieved. with event Broker:Message Undelivarible.
i have checked my port also using telnet with remotely and localy both working fine. i am using port no. 4001 and i have mentioned the port no. in the address of the route.
what can cause the above error when connecting to an endpoint via a c# app? the app, and sql are both on my machine ( im just doing this for test purposes and to learn something new.)
Got this error running a query with ssms2014 on SqlServer2014 but db has Compatibiliy level 100 (sql2008)
no sql error code in message and no error found in eventviewr (sqlserver log, windows log, application log ecc)when i run that query i got this message in "messages" tab, and in results tab i got a strange result, indeed the value returned doesn't exists in table.
ex table1.field1 possible values= 2,3 it returns 1113344
we got that error thru jdbc too...that query use a lot of joins, unfortunatley i can't post it here. today got this error, so i make a copy of 1 of involved table into another db in the same instance, re run the query on the original db, and it works well.
First off I understand that it is a horrible idea to run extremely large/long running reports, but sometimes it ends up being the best possible solution due to external forces.
I've got a 25,000 page report that we recently converted from crystal reports to SSRS. The SSRS server is a 64bit 2003 server with 32 gigs of ram running SSRS 2005. When running the report through the report manager web application, it renders in the browser/viewer after about 12 minutes. Exporting to pdf through the browser/viewer in the report manager takes an additional 55 minutes. It does work and it produces a whopping 1.03gb pdf.
Unfortunately, I've run into a problem when trying to do this from a console application using the SSRS client API. After about 30-35 minutes I get an exception on the client with the following error: Exception Message: The underlying connection was closed: An unexpected error occurred on a receive. InnerException = Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
Here is the api call:
Code Snippet
byte[] m_data = reportingService.Render(this.ReportPath, this.ExportFormat, null, deviceInfo, selectedParameters, null, null, out encoding, out m_mimeType,
out usedParameters, out warnings, out streamIds); Here are some things I've tried so far:
set the HttpRuntime ExecutionTimeout value to 3 hours on the report server disabled http keep alives on the report server increased the script timeout on the report server set the report to never time out on the server set the report timeout to several hours on the client call Disabled antivirus on the client side, and verified there was no antivirus running on the reporting server. Tried using default credentials in the ReportingService object as opposed to supplying credentailsAny ideas would be appreciated. I understand the best solution is to split the report up into smaller reports, which is the backup option, but being able to keep it as one report is the goal.
I am using windows 2003 server and i have installed SSAS 2005 and configured http request for AS 2005 with this below url : http://www.microsoft.com/technet/prodtechnol/sql/2005/httpasws.mspx. I had tried all the possiblities given in this url. But i am getting like "Test connection failed because of error initializing provider. The HTTP Server returned the following error : Not found" when i create udl file. Moreover i have installed MSOLAP 3.0 and OLAP 9.0 provider and MSXML 6.0 Parser.
hi i got the following error message while connectiong to my sql server 2005
NB :i am connecting from the same pc where sq server is installed.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2)
Hi, I had an old web application created during asp.net 1.1 and it have a connection problem with the sql server 2005 when it is mirgrated to a new webserver with dotnet framework 2.0 platform. I have enabled the remote access(TCP/IP and named pipes) in sql server 2005, did all the neccessary things, check whether the TCP/IP is enabled, named pipe is enabled... I created another web application using VS 2005. The database connection works perfectly well.This are the connectionString from the old web application.<appSettings> <add key="ConnectionString" value="Server=127.0.0.1;Database=somedb;User id=user; Password=somepassword; Trusted_Connection=False; POOLING=FALSE"/></appSettings> Thankyou in advance!
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)
