Using SQL2K.
I'm extracting columns from a CSV file.
Once column, in the CSV file, has a format of general and is only populated by numbers (0 - 126); no decimal places.
During the extract, the column is copied into my staging table as an NVARCHAR value. However, after the extract, the values have all been appended with a ".0". What could be causing this?
Thanks!
Hi, I have a table with one XML type column. This column holds custom field information. Its used as a way of storing ad hoc fields and data that don't fit the DB design. <?xml version="1.0"?><contact><Reference>A39390TFH</Reference><Misc>all kinds of stuff go in here</Misc></contact>I want to provide a way of displaying the data stored in this column in the same DataTable as normal relational data from the same table. I have been able to achieve this goal BUT I want to know if the community had any ideas on how I could speed the process. I am using the XML value() function. It allows me to extract the data I need. SELECT Name, Number, Reference FROM
(
SELECT Name, Number, xmlvalues.value( ' (contact/Reference)[1] ', ' varchar(40) ' ) as Reference
From MyTable
WHERE Name = 'Some Dude'
AND xmlvalues is not null
) T
GROUP BY Name, Number, Reference anyone know if there are better xml functions to get this data out of the XMLColumn?????? There is no schema, because each xml fragment has different tags and different values. Regards Niall
Hi!
I am creating a scheduling web application. I have managed to insert data into the database. The code is as follow:
Dim insertSQLDatasource As New SqlDataSource()
insertSQLDatasource.ConnectionString = ConfigurationManager.ConnectionStrings("ScheduleConnectionString").ToString
insertSQLDatasource.InsertCommandType = SqlDataSourceCommandType.Text
insertSQLDatasource.InsertCommand = "INSERT INTO Demo_Theatre_DB (StartTime, EndTime, CompanyName, Purpose, AccountManager, Presenter, ColorCode, Status, Comments) VALUES (@StartTime, @EndTime, @CompanyName, @Purpose, @AccountManager, @Presenter, @ColorCode, @Status, @Comments)"
insertSQLDatasource.InsertParameters.Add("StartTime", StartTimeTextBox.Text)
insertSQLDatasource.InsertParameters.Add("EndTime", EndTimeTextBox.Text)
insertSQLDatasource.InsertParameters.Add("CompanyName", CompanyNameTextBox.Text)
insertSQLDatasource.InsertParameters.Add("Purpose", PurposeTextBox.Text)
insertSQLDatasource.InsertParameters.Add("AccountManager", AccountManagerTextBox.Text)
insertSQLDatasource.InsertParameters.Add("Presenter", PresenterTextBox.Text)
insertSQLDatasource.InsertParameters.Add("ColorCode", ColorDDL.SelectedValue.ToString)
insertSQLDatasource.InsertParameters.Add("Status", StatusRadioButtonList.SelectedValue)
insertSQLDatasource.InsertParameters.Add("Comments", CommentTextBox.Text)
Try
insertSQLDatasource.Insert()
Catch ex As Exception
Panel1.Visible = True
InsertMsgLabel.Text = ex.Message.ToString
Finally
insertSQLDatasource = Nothing
End Try
Now I am trying to select the values for a particular event. For example, if the user selects an event with id 40, the values that corresponds to that row will be read and filled into the respective controls. I tried the following code, but doesn't work.
Dim sqlConn As SqlConnection = New SqlConnection("ScheduleConnectionString")
Dim com As SqlCommand = New SqlCommand("SELECT * FROM Demo_Theatre_DB WHERE ID=@ID", sqlConn)
sqlConn.Open()
Dim r As SqlDataReader = com.ExecuteReader()
While r.Read()
StartTimeTextBox.Text = r("StartTime")
EndTimeTextBox.Text = r("EndTime")
CompanyNameTextBox.Text = r("CompanyName")
PurposeTextBox.Text = r("Purpose")
AccountManagerTextBox.Text = r("AccountManager")
PresenterTextBox.Text = r("Presenter")
ColorDDL.SelectedValue = r("ColorCode")
StatusRadioButtonList.SelectedValue = r("Status")
CommentTextBox.Text = r("Comments")
End While
I hope someone can help me with this.
Your help will be appreciated.
Thanks!
I've the following data:
<Hour>11</Hour><Hour>12</Hour><Hour>15</Hour><Hour>18</Hour>
And my goals is to the extract the following example:
11,12, 15, 18
How Can I do That?
I am using SQL 2005 merge replication with a publisher managing about 45 articles(tables) with about 10 subscribers (remote servers). The problem is that we had to re-start replication from scratch and noticed that, although the publisher's tables have the default values, the subscribers did not get the default values with the initial snap shot, schema building..?!?
I now have to go over 450 tables (10 remotes SQl servers at 45 tables each) and 'reset or set' over 1,000 default values. Meanwhile, the system is down...omg...so not good.
Is there a script out there that automatically extracts the default values from a table and set it to another exact table with the same structure? any ideas?
Thanks..CF
btw, i'm no scripting wizard....help!.
From the table i want everything highlighted with a *I wanted an SQl expression to look at values in Column 1 (ID), look atthe corresponding values in the second column (F1) and select the rowwith the highest value, and then if there was more than one row forthat ID with the same value in F1, look at column 3 (F2) and selectthe row with the highest value in this column.SQL> select * from test;ID F1 F2---------- ---------- ----------1 12 4* 1 12 61 11 11 9 122 3 5* 2 9 132 9 93 1 23 1 1* 3 7 5I try the followingSQL> select * from test t12 where f1 = (select max(f1) from test t2 where t2.id = t1.id)3 ;And get the followingID F1 F2---------- ---------- ----------1 12 4* 1 12 6* 2 9 132 9 9* 3 7 5If I add another line with an AND statement after line 2 I either getnothing or rubbish as the output.Ideas?Cheers
View 2 Replies View RelatedI have a report which is redirecting to a subreport. The main report is having multi value parameter. I need to pass these multi values to sub report. Passing parameters from MDX report to T-sql report. So, I'm using the below exp.
=SPLIT(REPLACE(TRIM(Join(Parameters!Grade.Label,",")),", ",","),",")
The value will look like this
01-Manger
02-Senior Mange
21-Associate
25-Associate Trainee
This is working for me in all the cases except one. In all other cases, the parameter's Label and Value field has same data in the sub report. But, in a specific parameter I'm getting Label and Value data are different. I'm getting an alpha numeric string value from MDX report , but I need to pass only the numeric values to the sub report since its value field contains only numeric value. The numeric value is coming at the starting of the string data. So I have used Mid()
=SPLIT(Mid(REPLACE(TRIM(Join(Parameters!Grade.Label,",")),",
",","),1,2),",")
Result will be 01
But, mid() will give only the first value. It is working for single value. But I need to extract multiple values.
Hi! could you please check my code on adding record on my DB.. Im using SQL Server included on VWD.Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click Dim con As String = "Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|Request.mdf;Integrated Security=True;User Instance=True" Dim sqlcon As New Data.SqlClient.SqlConnection(con) Dim sqlcmd As New Data.SqlClient.SqlCommand("Insert into uRequest (eticket, ename, edept, edetails, ejobpend, edate) values (@eticket,@ename,@edept,@edetails,@jobpend,@edate)") sqlcon.Open() sqlcmd.Parameters.Add("@eticket", Data.SqlDbType.Char, 10).Value = "11-0010-06" sqlcmd.Parameters.Add("@ename", Data.SqlDbType.Char, 100).Value = User.Identity.Name sqlcmd.Parameters.Add("@edept", Data.SqlDbType.Char, 50).Value = DropDownList1.Text sqlcmd.Parameters.Add("@edate", Data.SqlDbType.DateTime).Value = Date.Now sqlcmd.Parameters.Add("@edetails", Data.SqlDbType.Text).Value = TextBox1.Text sqlcmd.Parameters.Add("@ejobpend", Data.SqlDbType.Text).Value = TextBox2.Text sqlcon.Close() End Sub I've check the Data on my DB but nothing has been added. nwy, how can u create a confirmation message if the record has been successfully added.Thanks and sorry for the trouble.
View 1 Replies View RelatedNot 100% sure how to do this so I would appreciate some directions. I have 2 tables, Systems and Contacts. A system can have 1 to infinite contacts and contact can have 1 to infinite systems. So I use a 3rd table Sys_Con to add the contact needed for each system.
Now my question is once I add the System and contact how do I know for sure which ContactID to add in my Sys_Con table? Because while I am doing this operation maybe someone can add an other contact. So is there a way for my store proc Add_Contact to return the contactID needed for my store proc Add_Sys_Con ?
TABLE Sys_Con
SystemID int
ContactID int
Table Contact
ContactID int Identity
ContactName
...
Table System
SystemID
...
hi i have a question how can i delete last added row. I have 2 tables .source and destination . I take a 1 row from source table , do someoperation on it and save to destination table . after succesfull written Iwant to delete added row from source table.. i'm using a coursors. the mainproblem is : is there any function to check which row was last added. Now Iam doing it using select * from destionation where (and necessaryconditions). but if destination table will be 100000000 rows for example ittakes too much time... Is there another possibility to do it ???please helpMarcin Wolkuwolku
View 2 Replies View RelatedIn developing a VWDE project I added 2 columns to the User table in the ASPNETDB.mdf database. I can see the columns in the Data Definition and I can see the values I added when I Show Table Data but I cannot access them with a SQLDataSource control? The SQLDataSource shows all of the columns in that table except the ones I added. Any suggestions? Thanks.
View 2 Replies View RelatedI would like to retreive the identity field value of a record that was just added to the table.
In other words, I have a form and on submission, if it is a new record, I would like to know the identity value that the SQL Server has assigned it.
This may be overkill, but here is my code to process the form:
Protected Sub processForm(ByVal thisID As String, ByVal myAction As String)
Dim sqlConn As New SqlConnection(ConfigurationSettings.AppSettings("connectionString"))
sqlConn.Open()
Dim sql As String
Select Case myAction
Case "save"
If thisID > 0 Then
sql = "update INCIDENT set " & _
"RegionID = @RegionID, " & _
"DistrictID = @DistrictID, " & _
"DateReported = @DateReported, " & _
..CODE...
"WHERE IncidentID = " & myIncidentID
Else
sql = "insert into INCIDENT(" & _
"RegionID, " & _
"DistrictID, " & _
"DateReported, " & _
...CODE...
") " & _
"values(" & _
"@RegionID, " & _
"@DistrictID, " & _
"@DateReported, " & _
...CODE...
")"
End If
Case "delete"
sql = "delete from INCIDENT where IncidentID = " & myIncidentID
Case Else
End Select
Dim sqlComm As New SqlCommand(sql, sqlConn)
sqlComm.Parameters.Add(New SqlParameter("@RegionID", SqlDbType.NVarChar))
sqlComm.Parameters.Add(New SqlParameter("@DistrictID", SqlDbType.NVarChar))
sqlComm.Parameters.Add(New SqlParameter("@DateReported", SqlDbType.NVarChar))
...CODE...
sqlComm.Parameters.Item("@RegionID").Value = ddRegionID.SelectedValue
sqlComm.Parameters.Item("@DistrictID").Value = ddDistrictID.SelectedValue
sqlComm.Parameters.Item("@DateReported").Value = db.handleDate(txtDateReported.SelectedDate)
...CODE...
Dim myError As Int16 = sqlComm.ExecuteNonQuery
'Response.Redirect("incident.aspx?id=" & )
End Sub
The response.redirect at the end of the sub is where I would like to put the identity field value.
How many triggers can be added in a table?
View 2 Replies View Relatedhow do I position a newly added column in the table?
the default is at the very end.
what would I have to add to this code:
ALTER TABLE Vehicles
ADD Model varchar(55)
Thanks
Hi,
Is there a built in capability with sql server 2005 which sends emails to users upon a record insertion.
Thanks
is there a way to set up a scheduled sp to email me if no records are added to a certain table within the hour?
is this possible?
Here's the deal.I've been working on an Intranet application for my clients, and todayI went and installed the first prototype. It's a fairly standard thing- VS2003 ASP.NET/VB.NET on a SQL Server 2000 database.I restored the database onto their db server, and installed theapplication on their intranet server, and made the necessary changes tothe web.config and other configuration files.I logged on with no problem. The default form is a Search/Finder formwith no default recordset. I fired up the filter to return all therecords and the thing crashed. The filter form wouldn't get any data(there *was* data in the database - I checked that!). So I set a traceon the database and this is the SQL that was being sent to the server(note that this SQL is dynamically built and is being sent in-line):SET FMTONLY OFF; SET FMTONLY ON;SELECT fldID, fldReferenceNumber,fldRevision, fldPartNumber, fldIndentNumber, fldDescription,fldBatchNumber, fldCreatedDate FROM tblMyTable SET FMTONLY OFF;Note those SET FMTONLY OFF; SET FMTONLY ON;...SET FMTONLY OFF;directives. These direct SQL Server to return only metadata, and notdata rows. The SQL which SHOULD have been sent, and which I have justcaptured in the SQL Profiler on MY system here is:SELECT fldID, fldReferenceNumber, fldRevision, fldPartNumber,fldIndentNumber, fldDescription, fldBatchNumber, fldCreatedDate FROMtblMyTableWHERE (((tblMyTable.fldReferenceNumber LIKE N'%')))Again, note that the WHERE clause is missing from the first lot of SQL.Does anyone have any ideas about why this might be happening? I thinkit might have something to do with ownership/permissions, but Icouldn't find anything different about this database than the system onwhich this new application was modelled, which has no such problems.Edward
View 3 Replies View RelatedHello all, i have a question i've beenk thinking for a little bit andcant seem to come up with a solution. What i want to do is add a uniquecounter to a resultset in query. For exampleSELECT ColumnA, ColumnB, ColumnC, ColumnDFROM AnyCombinationOfJoinsOrTablesWHERE SomeConditionIsTruewThe query above will produce a resultest of 4 columns.'A1', 'B1', 'C1', 'D1''A2', 'B2', 'C2', 'D2''A3', 'B3', 'C3', 'D3'......'An', 'Bn', 'Cn, 'Dn'Now what i want to do is add a unique identifier to every row. Theeasiest way would be to add a counter integer so the resultset wouldlook like1, 'A1', 'B1', 'C1', 'D1'2, 'A2', 'B2', 'C2', 'D2'3, 'A3', 'B3', 'C3', 'D3'......n, 'An', 'Bn', 'Cn, 'Dn'Is there a way to achieve this in T-SQL without using cursors.Thanks,Gent
View 3 Replies View Related
I have a stored procedure that works fine in reporting services. It grabs the total of Yes's and No's by dates . But then i went ahead and added 2 more parameters to the proc, and now the totals are all wrong. I dont understand how that can mess everything up. Here is the previous stored proc, that gives the correct sum.
Code Snippet
ALTER PROCEDURE [dbo].[Testing_Questions_ALL_YESOrNO]
@Question char(80)
AS
BEGIN
SELECT
Qry_Questions.Question
, Qry_Questions.Date
, Qry_Questions.response
, B.Total
FROM Qry_Questions
INNER JOIN Qry_Sales_Group
ON dbo.Qry_Questions.sales_person_code COLLATE SQL_Latin1_General_CP1_CI_AS = dbo.Qry_Sales_Group.SalesPerson_Purchaser_Code
INNER JOIN
( Select COUNT(qq.response)as Total, Question, Date, response
FROM Qry_Questions qq
Where qq.response in ('Yes','No')
GROUP by qq.[Question] , qq.Date,qq.response ) B
ON Qry_Questions.Date = B.Date AND
Qry_Questions.Question =B.Question and
Qry_Questions.response=B.response
WHERE Qry_Questions.[Response Type]='YesNo' and Qry_Questions.Question=@Question
GROUP BY Qry_Questions.question,Qry_Questions.Date,Qry_questions.Response,B.Total
ORDER BY Qry_Questions.Question, Qry_Questions.Date
END
SET NOCOUNT OFF
Here is the edited version which only has two new parameters added to the proc. The edits are highlighted.
Code Snippet
ALTER PROCEDURE [dbo].[Testing_Questions_ALL_YESOrNO_Totals]
(@Region_Key int=null,@QuestionCode char(5),@Question char(80))
AS
BEGIN
SELECT
Qry_Questions.Question
, Qry_Questions.Date
, Qry_Questions.response
, B.Total
FROM Qry_Questions
INNER JOIN Qry_Sales_Group
ON dbo.Qry_Questions.sales_person_code COLLATE SQL_Latin1_General_CP1_CI_AS = dbo.Qry_Sales_Group.SalesPerson_Purchaser_Code
INNER JOIN
( Select COUNT(qq.response)as Total, Question, Date, response
FROM Qry_Questions qq
Where qq.response in ('Yes','No')
GROUP by qq.[Question] , qq.Date,qq.response ) B
ON Qry_Questions.Date = B.Date AND
Qry_Questions.Question =B.Question and
Qry_Questions.response=B.response
WHERE Qry_Questions.[Response Type]='YesNo'
AND REGION_KEY=@Region_Key
AND LEFT(Qry_Questions.[Question Code],2)IN (@QuestionCode)
AND Qry_Questions.Question=@Question
GROUP BY Qry_Questions.question,Qry_Questions.Date,Qry_questions.Response,B.Total
ORDER BY Qry_Questions.Question, Qry_Questions.Date
END
SET NOCOUNT OFF
Here is a new one for me. I added the /3GB switch to the boot.ini, restarted the server and now receive a number of messages when the OS tries to load.
Explorer.exe - Application Error
The application failed to initialize properly.
If I click OK the server sits on a blue screen with no information on the screen.
The other messages are the result of me trying to do anything within Task Manager, with the exception of rebooting the server. These messages make sense since Explorer.exe had a problem.
The server has the following configuration.
HP DL580
Windows Server 2003 Enterprise Edition - SP2
SQL Server 2000 Enterprise Edition - SP3a
14GB Memory
(4) dual core procs
PAE is enabled in the boot.ini
If I remove the /3GB the OS starts without a problem. Any suggestions?
Thanks, Dave
I'm running vb 2088 express with SQL express. I have limited VB and very limited SQL knowledge.
I have a VB app that inserts candidate data into the SQL table (called front) all works fine.
I now have a second VB app (separate from the above VB app) that runs at the same time; it does some extra work on the candidate data.
My question is when a new candidate is added to the SQL table, how I can get the second VB app to automatically know that a new record has been inserted (and the record key) and then start the VB subroutine.
I'm unsure if I should look at triggers or stored procedures (or something else) for this task.
Any help or pointers to additional resources would be appreciated.
Thank you!
TJ
I ran the code below that adds a column to an SQL table.
I refreshed Data Sources, but, the new column does not appear.
I refreshed Server Explorer and the new column does not appear.
I tried running the code again and I got:
"Column names in each table must be unique. Column name 'CaseNbr' in table 'Patient' is specified more than once."
so the column did actually get added, but, I can't see it.
Imports System.Data.SqlClient
Public Class Form1
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
'Try
Dim sqlConnection As New System.Data.SqlClient.SqlConnection("Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|Patient.mdf;Integrated Security=True;User Instance=True")
Dim str As String = "ALTER TABLE Patient ADD CaseNbr Varchar(50)"
Dim command As New System.Data.SqlClient.SqlCommand(str, sqlConnection)
sqlConnection.Open()
command.ExecuteNonQuery()
sqlConnection.Close()
'Catch
'End Try
Close()
End Sub
End Class
Hi All,
I have a createStudent SProc. When this is called it calls a createContact SProc. This in turn calls a Create Address Stored procedure. Now when I create the address, an Identity column automatically creates a new Identity for me. I need to return this value back to the calling stored procedure. I know how to return a value and all, however, how to I get the identity just entered (the corresponding identity) reliably? I know that select MAX <Identity> could suffice in this case, but is flawed as if someone was to add another object near the same time we could get the wrong identity returned...
Thanks heaps
Chris
I am using Reporting Services 2000 and therefore VS 2003 and am having a problem editing the T-SQL query in the data view of Visual Studio.
Basically if I manually edit the T-SQL query or touch anything in the designer view of the query I get odd characters added in the T-SQL and the query no longer works. I have tried re-installing VS2003 and RS 2000 but it's still happening.
FYI I also have SQLServer 2005 and VS 2005 on my machine as all applications we develop are in .Net 2.0 and 3.0. We only use VS2003 for RS.
Does anyone have a clue how to fix this? Thanks
Howdie y'all,
I'm quit new to SQL server and I'm getting there finally, but it's quit hard to find some good info on how to create stored procedures... But I've got the following one....
CREATE PROCEDURE [dbo].[spAddUser]@UserEmail VARCHAR(255),@UserPassword VARCHAR(16),@UserName VARCHAR(32)ASINSERT INTO [dbo].[tblUsers](UserEmail, UserPassword, UserName)VALUES (@UserEmail, @UserPassword, @UserName)GO
I actually would like to get value of the UserId column for the newly added record.
Can anyone of you folks help me with this?
Cheers,
Wes
For some reason, there are extra trailing spaces being added to all my
data as it is placed in the db. I am collecting information from,
processing a TRIM-like function in javascript, and then again in the
ASP.net code before it is being placed in the db.
The extra spaces are causing problems with my application.
Any help would be greatly appreciated.
We're replicating columns in a table from 7.0 server to SQL2k server. Once we've got the data on SQL2k, we were able to take advantage of DTS that was not available in version 7.0.
I recenlty added a column to the article and changed the DTS accordingly (transformation columns). However, I'm getting this error ever though I added the new column in the DTS.
-------
The number of columns in the bcp file does not match what is defined in the DTS package. Regenerate the package.
-----
I've recreated the package with no luck. This is becoming urgent as it's supposed to go into production soon.
Please help!!
Thanks,
Colleen
Is it possible to find out when a particular column was added to any table?
Thanks
i recorded a script for a change i need to make. actually 15 so far, i am getting ready to bring an access db with no pk or fk and only 1 relation over to ss05
my scripts are used to add the need pk fk to the tables and then move the data from the temptbl to the new one
1 thing i have been noticing is code like below will rename the table dbo.aMgmt.Employee and with that all the remaing lines of the script will fail.
DROP TABLE aMgmt.Employee
GO
EXECUTE sp_rename N'dbo.Tmp_Employee', N'aMgmt.Employee', 'OBJECT'
GO
any help?
I have a SQL database that gets populated by another program. Is there a way to determine when a new record is added to that database?
Thanks
Hi..
I created a publication on my server and I just clicked the box to include all of the stored procedures. If I add a new procedure, will that procedure also be included? Or will I have to modify the publication for each SP I create?
Thanks!
-Greg
I have a db that grew 8.2GB in one week and don't understand why.There are three tables added to the db daily. I calculated thespaceused by each of the three tables for a period of two weeks. Thetatal amount of data added to the db for the three daily tables overthe past two weeks was about 4MB yet the db grew approximately 8.2GB.WHY?Can someone please tell me what I should look at so that I canunderstand what is going on?
View 4 Replies View RelatedWe are running into problems on our development environment with extraparameters being added on to a stored procedure call. Instead of theexpected stored procedure call, the trace shows something like this:declare @P1 intset @P1=NULL<<expected stored procedure call>> , @P1 output, <<repeat of firstthree sp parms>>select @P1The developer has checked the code, and I have checked the SP - bothseem to match what is in production (which works fine). The databasesare on the same server, and the apps are running on seperate webservers.I'm guessing this may be some sort of configuration issue with ADO,SQL, or something else - has anyone run into something similar tothis? Thanks!Dave
View 2 Replies View Related