Fail To Execute Store Procedure In OLD DB Source In Data Flow
Jun 20, 2006
Hi. I am trying to extract the data returned from a store procedure to a flat file. However, it fail to execute this package in the OLE DB Source.
I select the SQL Command in the Data Access Mode, then use:
USE [SecurityMaster]
EXEC [dbo].[smf_ListEquity]
It runs ok in the Preview, but not in the Run. Then the system returns during executing the package:
Error: 0xC02092B4 at Load TickerList, OLE DB Source [510]: A rowset based on the SQL command was not returned by the OLE DB provider.
Error: 0xC004701A at Load TickerList, DTS.Pipeline: component "OLE DB Source" (510) failed the pre-execute phase and returned error code 0xC02092B4.
I have set up a new connection as a connection from data source, but I cannot see how to use this connection to create my Data Flow Source. I have tried using an OLE DB connection, but this is painfully slow! The process of loading 10,000 rows takes 14 - 15 minutes. The same process in Access using SQL on a linked table via DSN takes 45 seconds.
Have I missed something in my set up of the OLE DB source / connection? Will a DSN source be faster?
i have a problem. I want to execute a sp from a DTS package but it doesn't work correctly. If i execute it from the query analyzer it work fine. I have configured merge replication with pull subscription on the data base.
Hi Am trying execute a store procedure with a date parameter than simply get back ever record after this todays date. It wont except the value i give. I can just do it in the store procedure as it will passed other values later on. It works fine if I take the parameter out, of both store procedure and code. It must be a syntax thing but im stuck sorry --- the error i get is: Incorrect syntax near 'GetAppointmentSessions'. here is my code: ' build calendar for appointment sessions Dim Today As Date = Date.Now Dim ConnStr As String = WebConfigurationManager.ConnectionStrings("ConnString").ConnectionString Dim Conn As New SqlConnection(ConnStr) Conn.Open()
Dim cmd As New SqlCommand("GetAppointmentSessions", Conn) cmd.Parameters.Add("InputDate", SqlDbType.DateTime).Value = CType(Today, DateTime) Dim adapter As New SqlDataAdapter(cmd)
Dim dt As New DataTable
adapter.Fill(dt)
Dim row As DataRow Here is the SQL:ALTER procedure [dbo].[GetAppointmentSessions]
@InputDate Datetime AS
SELECT TOP (5) uidAppointmentSession, dtmDate, (SELECT strRoomName FROM tblRooms WHERE (uidRoom = tblAppointmentSessions.fkRoom)) AS Room, (SELECT strName FROM tblHMResources WHERE (uidHMResources = tblAppointmentSessions.fkHMResource)) AS Clinician, dtmStartBusinessHours, dtmEndBusinessHours FROM tblAppointmentSessions
I have a INSERT INTO where i retunr the result from a store procedure. But I want to only insert the data if the row not already exist. How can i do that? (See Where xxxxxxxxxxxx).
I can't use a function as i store data in a temporary table in the store procedure.
--Get Generated Times INSERT INTO @GeneratedTimes( ResourceId , DateFrom , DateTo ) EXEC dbo.P_GenerateTimes @ApplicationId , @EventId , @FromDate , @ToDate , @WeekScheduleId , @FromTimeToBook , @ToTimeToBook WHERE xxxxxxxxxxxxxxxxxx
I have a Execute SQL Task that calls a stored procedure. The text of the stored procedure is an "INSERT INTO .. SELECT ..." statement. When I run the text in Query Analyzer, it completes successfully. When I call the Stored Procedure, it executes but does not insert the data. It has a date parameter, but hard coding the date parameter does not work either. I checked the permissions on the Stored Procedure and SQL Agent, which are ok. When I change BypassPrepare to True, the query will execute and insert the rows to the required table. If someone has an explanation for this, I would appreciate some sql enlightenment. Thanks.
I need to see inside a SSIS 2012 project a new SSIS installed component, but in the SSDT 2010 I cannot see the SSIS Data Flow Items tab for adding data source/data destination respect to the choose toolbox items pane.
I have been using a recordset destination in a data flow where I need to perform some complex manipulation on a dataset, including combining some information from a web service and updating records that already exist, vs. inserting them.
I have a script task that modifies the dataset as needed, and then saves it back to the variable it came from.
However, when it comes time to write the data to the database, I couldn't find an appropriate tool - there's no "recordset source" object in the data flow task, and use of a "for each" loop with a sql call to a stored proc takes 20 minutes for a few thousand rows.
The best way I could find around this was as follows:
Call the .NET ".GetXML" method on the dataset and put the resulting XML data into a string variable Generate an XSD for that XML (it comes out like <NewDataSet><Table1>...) Use an XML source in the data flow task.This works, and the same data insert that took 20 minutes via the loop / stored procs now takes under 10 seconds.
It seems horribly inefficient to have to do this - there should be a way to just dump my dataset back into a table natively without all that extra stuff.
do I get any better speed if doing it on a SP instead of just SELECT without an SP ?
if I have many users on a web-site that will execute this SP - will they get any better speed because it is a SP ? - can SP cache itself - if so - for how long ?
(Why should I use SP if not passing any parameters ?)
Hi, I have been searching for an answer to allow me to execute xp_cmdshell from withing store prcedure by calling the store procedure from an aspx via click on a button. This is what I found from my reserch but was not able to know where to set the rights and what each of them means: "To run xp_cmdshell for a non-system administrator user, you must grant the following rights. MSSQLServer and SQLServerAgent Services Act as part of the Operating System. Increase Quotas. Replace a process level token. Log on as a batch job."
The above quote was from the following link: http://support.microsoft.com/default.aspx?scid=kb;en-us;264155
The bottom line is to be able to call a store procedure from an aspx page to execute the code which contain xp_cmdshell command, an example of such command is like: ------------------------------------------------------------ EXEC master..xp_cmdshell 'dir d:BT_importDatasales_option_price_report.csv'
In the data flow task, i have thosands of rows flowing, now just before inserting these rows into a table, i want to delete some rows in the destination table. For this, if i use the oledb command, then it will run several times. I think a script can do it but I want to avoid it because it would be an inefficient affair.
I am new to SSIS programming, so bear with me if my question seems naive to you gurus. I have a situation that needs to set the data source for a data flow from external .NET application ('external' means that the application will run on different process than the SSIS). I am trying to set the data source on which the data flow works from my C# application in a DataSet format. Ideal solution is not to save the DataSet to any file on harddisk (I know that will work, but has the overhead of writing, reading and managing the temp file). What I want to achive is that the business logic of picking data for SSIS Data Flow to process is controlled inside my C# application, the Data Flow just does what it does best - Transformation. Have any of you successfully done this before?. Thanks!
i have a package in ssis that needs to deliver data from outside servers with odbc connection. i have desined the package with dataflow object that includes inside a datareader source. the data reader source connect via ado.net odbc connection to the ouside servers and makes a query like: select * from x where y=? and then i pass the data to my sql server. my question is like the following:
how do i config the datasource reader or the dataflow so it will recognize an input value to my above query? i.e for example:
select * from x where y=5 (5 is a global variable that i have inside the package). i did not see anywhere where can i do it.
I have a simple data flow task, composed of only an OLEDB Source, a Conditional Split, and two Execute SQL statements (both insert statements, one after the other). When I run my package in Visual Studio for debugging, I noticed that after executing around ~9800 in the first and another ~9800 records in the second insert statements, the OLEDB Source will take around 3 or 4 minutes to fetch another set of ~9800 records. I have set the DefaultBufferMaxRows property of the Data Flow to 10000. My query to retrieve those 700,000 records runs for about 2-3 mins to finish (which I think should be decent enough). Is this an expected behavior of SSIS? The expected number of records to be retrieved is 700,000, and it takes forever to finish the transfer of these records. Please help
We're trying to read DBASE IV files as a source, but can't find any providers for that format. Will these be included in the final release? Is there another way? DBASE has always been supported, so it's kinda stranged.
I'm wondering if it is possible to create a flat file source on the fly while bypassing the following step:
On the Connection Managers page, add or create the Flat File connection manager, using a descriptive name such as MyFlatFileSrcConnectionManager. Then close the Script Transformation Editor.
I want to create the connection totally in script, yet i'm having a hard time proving this out...does anybody have any experience with this?
Hi, I'd like to know which is the best choice to execute a store procedure that execute transformations from table to files using bcp command, 2 millions rows everyday (i'ts a Data Warehouse database). So in the sql task in connectionType I had choiced ADO.NET is the best option? Thanks
I have following requirement. From OLE-DB source I am getting IDS. Then lookup with some master data. Now I have only matching IDs. Now I need find some filed(say Frequency from some table for each above id). I already write stored procedure for same where I am passing ID as parameter.Which is working fine when I run it SQL server management studio.
Query is sort of
Select field1,fiel2... from table 1 where id = @id
@id is each ID from lookup
Now I want to call this stored procedure in Data flow. I tried it using OLE DB command but it did not return output of stored procudre. I am getting output same what ever I am passing input.
Is there way to do this? In short my requirement is execute parametrized select statement using data flow trasformation component.
Inside a data flow task, i have a oledb source and destination. In my situation, I need to pull data from a table in the source, but also hard code some columns myself, which means my source is a blend of data from table, hard coded data, which will then have to be mapped to columns in oledb destination. Does anyone which option to choose in the oledb source dropdown for the data access mode. Keep in mind, i do need to run a a select query, as well as get data from a table. Is it possible to use multiple oledb sources and connect to one destination, because that is really what intend to do here. I am not sure how it will work, or even if its possible. Basically my source access mode needs to be a blend of sql command and table columns, how would that be implemented? Any help or advice is appreciated.
I am trying to execute a SP like below in OLEDB source in data flow... and this statement include the insert stament ( row by row transaction).. I would like to creat an error hadling logic so that if the trasaction fail to insert the row then ignore that particular row then, move to the next row without stopping the whole process.. how can i do this?
I'm creating a SSIS in the designer view of SQL Server BI Dev. Studio (SQL Server 2005)
I need to import a whole table from MS Access into my local SQL Server.(this task will be performed weekly, so once working I'll schedule a job for it)
I've created a 'FILE' connection to MS Access in the 'Connection Managers'.
When I'm on the 'Data Flow' tab I can't find a Data Flow Item to use as a MS Access connection. (available on the 'Data Flow Sources' are only: DataReader, Excel, Flat File, OLE DB, Raw File and XML Sources)
I am trying to executed a packege so that it loads data from from the excel file to the SQL Server Server database. When I execute it, it prompts the following error message and 1 warning The excel file has three colums, Week, Item and Value
Error 4 Validation error. Data Flow Task: OLE DB Source [94]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80040E37 Description: "ORA-00942: table or view does not exist ". Test - GET NW PERF 1.dtsx 0 0
Warning
Warning 1 Validation warning. Data Flow Task: OLE DB Destination [36]: The external metadata column collection is out of synchronization with the data source columns. The column "DAY" needs to be added to the external metadata column collection. The column "TCH_AVAIL" needs to be added to the external metadata column collection. The column "PDROP" needs to be added to the external metadata column collection. The column "P_HR" needs to be added to the external metadata column collection. The column "SFAIL" needs to be added to the external metadata column collection. The "external metadata column "VALUE" (90)" needs to be removed from the external metadata column collection. The "external metadata column "ITEM" (89)" needs to be removed from the external metadata column collection. Not in use - GET NW STATS.dtsx 0 0
I am able to use a custom script task to receive a MSMQ package and save the package contents to a flat file.
I can also use the bulk load task to push the flat file contents into a SQL table.
However, I would like to save the package contents to a variable (done, it works), and then pass that string variable to a data flow task for SQL upload. In other words, I don't see any reason to persist the msmq package contents to disk.
My question is: Which data flow source can I use that will accept a string variable? The string variable will then need to be processed with bulk load or an execute sql task.
Btw, the content of the string variable is a csv style string:
In DTS 2000 I had a situation where I had a text file as input source and text file as output source. On migrating the package to 2005 it puts a wrapper around it which executes it as a 2000 package, the rest of the tasks are neatly converted to 2005 style tasks. I presume this to mean that this will not be supported through to the next version, and there is no direct equivalent in 2005.
My question is how do I import a non-flat file source which has different numbers of columns per line. I did ,somehow, manage to do this with 2000 but cannot seem to get anywhere with 2005.
The flat file source seems to be expecting a common number of columns and just can't seem to cope with no column delimiters on some lines. If anybody knows different I would be glad to hear about it.
Raw data is not helpful to me as only works with a specific raw type (apparently)
Went onto Bulk Insert Task but got this message
[Bulk Insert Task] Error: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.Bulk load: An unexpected end of file was encountered in the data file.".
Have already browsed with this on web but only find comments about changing timeout setting.
Can find timeout settings in DataFlow source and DataFlow destinations but not in Bulk Insert Task.
As you can see this is a long and protracted question.
If the answer is simple I apologise if not blame Microsoft. Other than that have found SSIS has some nice improvements, apart from the odd vague error message I keep coming across.
I'm using SSIS in Visual Studio 2012. My Execute SQL Task calls a Stored Procedure where I have a TRY-CATCH. Last week there was a problem and the CATCH was executed and logged an error to my error table, but for some reason the Execute SQL Task didn't fail. Is there a setting to make the Execute SQL Task fail when an SP encounters a failure?
I have a SQL Task that calls a stored procedure and returns an output parameter. The task fails with error "Value does not fall within the expected range." The Stored Procedure is defined as follows: Create Procedure [dbo].[TestOutputParms] @InParm INT , @OutParm INT OUTPUT as Set @OutParm = @InParm + 5 The task uses an OLEDB connection and has a source type of Direct Input. The SQL Statement is Exec TestOutputParms 7, ? output The parameter mapping is: Variable Name Direction Data Type Parameter Name User::OutParm Output LONG @OutParm
hi, i need execute a store procedure of Informix from sql server integration services. i use driver IBM informix provider 3.2 and have linked server Informix and use sql task for execute the procedure it's posible??
Okay, this should be really simple but I don't get it. How do I use an ODBC data source in an SSIS data flow task? When I look at Data Flow Sources I see the following options:
Pointer
DataReader Source
Excel Source
Flat File Source
OLE DB Source
Raw File Source
XML Source
Which one do I use if I need to get the data from a connection manager that is ODBC based? The IBM OLEDB driver for the AS400 doesn't work correctly so I HAVE to use an ODBC driver to connect to an AS400 data source.
I have a package that used to work fine, but after I imported it into a different existing solution and tried to run it, it always stalls during the data flow task at the very end.
It will run through and process all the rows and insert them into the destination except for the last chunk. The task blocks eventually all turn green as well, but then it never proceeds to the next task after the data flow. Looking at the Progress tab for the data flow task, I get the following: Progress: Pre-Execute - 100 percent complete [DTS.Pipeline] Information: Execute phase is beginning. [DTS.Pipeline] Information: Post Execute phase is beginning. Progress: Post Execute - 0 percent complete
Then it just stays at 0 percent for Post Execute. The program doesn't hang or anything, it just doesn't progress at all. I also just checked and I run the package from its original solution and it is now exhibiting the same behavior as well.
Any ideas what might be causing this or something to do to try and figure it out or at least get more information about what might be causing it?
