I have a select statment that gives me an error, cannot go more than rowsize 8094.
I am trying to find the particualr record/acctno, where the rowsize is excedding the max limi of 8094 chars. Once I have the acctno, I will correct it.
But how do I find which acct has this issue? Bascailly how can I find which record size is more than 8094 chars?
I tried checking to see if the point at which the reader was, that if it was the record I am looking for to go ahead and add the table data to a label. But for some reason it's only taking the first record in the database and not the one I thought I was at.[CODE] public void UpdateMaleHistLbl() { SqlConnection conn = new SqlConnection("Server=localhost\SqlExpress;Database=MyFamTree;" + "Integrated Security=True"); SqlCommand comm = new SqlCommand("SELECT * FROM FatherHistTable, MotherHistTable, UsersTable WHERE UsersTable.UserName = @usrnmeLbl ", conn); comm.Parameters.AddWithValue("@usrnmeLbl", usrnmeLbl.Text); conn.Open(); SqlDataReader reader = comm.ExecuteReader(); while (reader.Read()) { string usr = reader["username"].ToString(); usr = usr.TrimEnd(); string pss = reader["password"].ToString(); pss = pss.TrimEnd(); if (usrnmeLbl.Text == usr) { if (hiddenpassLbl.Text == pss) { maleHistLbl.Text = reader["GG_Grandfather"] + " > "; maleHistLbl.Text += reader["G_Grandfather"] + " > "; maleHistLbl.Text += reader["Grandfather"] + " > "; maleHistLbl.Text += reader["Father"] + " > "; maleHistLbl.Text += reader["Son"] + " > "; maleHistLbl.Text += reader["Grandson"] + " > "; maleHistLbl.Text += reader["G_Grandson"] + " > "; maleHistLbl.Text += reader["GG_Grandson"] + "<br /><br />"; } } break; //exit out of the loop since user found } reader.Close(); conn.Close(); }}[/CODE]Thanks in advance
View 1 Replies View RelatedCode:
"SELECT " & _
"Asset_Number, Inv_ID " & _
"FROM " & _
"tbl_Asset "
OKay looking at this highly simplified query here is my problem.
We have a ton of Asset numbers that are the same and for each asset number the inv_id should also be the same.....
However, since this data gets entered by humans - sometimes the inv_id is wrong....
I need to figure out a query that fleshes out the rows where asset_nums are the same but inv_id is different than other rows...?
Of course this may be impossible.....
I mean what if there was only two records by the same asset_num and each inv_id was different?
How could the query know which was the right one......
I need to run a report that finds the invalid inv_id's so that they can corrected.....
any thoughts on how this is done?
My thoughts are - using an inner select...
something to the effect of :
SELECT ....
FROM
(SELECT * WHERE (inv_id = inv_id) > 1)
GROUP BY asset_num.........
I just dont know exactly what the correct syntax is....
muchas gracias....
(btw this is actually ms-sql but mysql forum is so much more popular and the syntaxes are similar enough....thank you...)
sno Empid Address Date
------------------------------------------------
1100bhopal2008-01-02 00:00:00.000
2100indore2008-02-02 00:00:00.000
3100gwalior2008-03-03 00:00:00.000
4101gwalior2008-01-02 00:00:00.000
5101Indore2008-02-02 00:00:00.000
6102bhopal2008-01-01 00:00:00.000
------------------------------------------------
I want last update Address of employee from this table like
100 Gwalior
101 Indore
102 Bhopal
pls help me out ...............
Yaman
hi all,
if we have 100 same records, how can we select any 50 of it? thanks
~~~Focus on problem, not solution~~~
Hi,
I'm using SQL Server 7.0 SP3.
I need to calculate the average size of a record in my database to assist in estimating growth.
Is there a quick and/or easy way of doing this?
Thanks in advance,
Darrin
Trying to get the rowcount, rowsize for every table in everydatabase?
I'm getting the same tables from the same db. anyone ideas how to fix it?
declare @db varchar(40)
declare @sql varchar(8000)
declare @cursor varchar(8000)
declare @table_name varchar(60)
declare a cursor for
select name from master..sysdatabases
open a
fetch a into @db
while @@fetch_status = 0
begin
print ''
set @sql = 'use [' + @db + ']'
print @sql
exec (@sql)
declare b cursor for
select table_name from information_schema.tables
where table_type = 'base table'
and table_schema = 'dbo'
and table_name not like 'dbo.%'
open b
fetch next from b into @table_name
while @@fetch_status = 0
begin
select @cursor = 'exec sp_spaceused ' + '[' + @table_name + ']'
print @cursor
-- exec (@cursor)
fetch next from b into @table_name
end
close b
deallocate b
fetch next from a into @db
end
close a
deallocate a
=============================
http://www.sqlserverstudy.com
I have a view that selects various fields, from various tbls.
When I run that view it erros out as follows:
Could not insert a row larger than the page size into a hash table. Resubmit the query with the ROBUST PLAN hint.
It seems like 1 particualr record, is exceeding the rowzise. and hence the errors.
How can I resolve this..
Is there any method so that I can find that the particular user has changed the record in the particualr table..?
View 1 Replies View RelatedI have a mystery database on my hands...it is part of an application that my company bought, and it uses SQL server for its backend. The reporting features built in are not good enough, so I need to write some queries by hand...trouble is I am having a hard time figuring out how the schema works...using the front end they gave us I put a value of "12345" for a field I need to get to, but I can not locate where in the db it gets stored....can anyone tell me a way to query that will look at every single record and every single field in the db to find the value "12345"??
View 14 Replies View RelatedI have a table called Register that has the following in it
Policy_number, Policy_date_time, Portfolio_set, Status..The rule for the table is that the last record for each portfolio_set for a policy the status needs to be 'A' but there have been instances that the last record status is 'I'
I need to identify the record that is out of place..In the example below record number 2.
example
policy_number Policy_date_time Portfolio_set, status
12345 1/1/2011 1 I
12345 1/2/2011 1 A
12345 1/3/2011 1 I
12345 1/4/2011 1 I
I need to identify that the second record is in the wrong place...
Hello
I need an alarm or raise an event from SQL Server after updating to get it in .net.
I use SQL Server 2005 Express Edition and vb.net2 for my programming language.
Suppose that in a windows form I have a grid and I'm working with this page
another client is working with this same page .He is editing the information of
a record of a grid and save it in database so I want to give an alarm or an event
that raise from SQL Server (for example in a trigger) , what can I do?
Thanks.
Is there a way to tell who or what process deleted a record in a SQL table.I know you can setup triggers or Profiler - but is there a way to see how arecord was deleted if you DO NOT have a trigger or Profiler already running?This is SQL 2000 Standard, sp3a with default options and configuration.Thanks
View 2 Replies View RelatedHi,I read this article on net recently.http://joseph.randomnetworks.com/archives/2005/08/30/sql-server-2000-maximum-row-size-8060-bytes/And according to it, SQL Server 2000 have around 8K of Row Size.Now consider this , i have table have two column and in each column i have inserted data around 6k.Now my question is , how sql server is going to store this.Is it in 2 different Row ?Can any one explains this or provides links related to it.ByeAmit
View 1 Replies View RelatedHi!
I get this mysterious error while running an update.
SQLServer tells me that my update row is to big to fit in a row.
Then I check the size of the row and and it is like 2000 bytes so
it should fit without any problem at all. The really strange about
it that when comments a field it works just fine. That field is always
null. Could that be the problem. Anyone who have ever had a similar
problem or so?
We have a work order notes table in our ERP system, and I want to see the most recent note record for each work order. Sometimes there will one be one, so I want to see all those, but sometimes there will be several notes for each work order and in this case I want to see only the most recently added note for that work order.
The query below shows some results as an example. In this case I want to see all the records except for work order number DN-000023 where I only want to see the note dated/timed 07-12-2011 16:52 (the most recent one).
select id, worknumber, date, notes from worksordernotes
id worknumber date
----------- ------------ ----------------------- --------------------
1 DN-000056 2011-12-07 13:22:00 13.20 PM JAMES- SPOK
2 DN-000079 2011-12-07 14:24:00 JCB HAVE TOLD ME THE
4 DN-000065 2011-12-07 15:48:00 ANDY FROM SITE RANG
5 DN-000023 2011-12-07 15:54:00 CHASED THIS 4 TIMES
6 DN-000023 2011-12-07 16:52:00 HOLTS ATTENDED THIS
7 DN-000092 2011-12-08 09:50:00 RETURNING WITH PARTS
I need to find all items in an inventory table where a field has been unticked in the last 24 hours (there is no audit trail), as well as the contract number of the contract it has been added to (it will not have existed in that table before).
These are the two table querys in their basic form:
select item (nvarchar(20)), inactive (bit) from inventory
select item (nvarchar(20) , contract (nvarchar(20)) , original_start_rent (datetime) from deltickitem
I would like to see just the item number and the contract number it has been added to.
I have a table with member information. Each member has multiple effective dates. I would like to query to find the record for each member that has the maximum effective date. A sample table is below:
MEMBERID EFECTIVEDATE
------------ ------------------
699361401 20070101
699361401 20070501
732612701 20070101
732612701 20070501
575424301 20070101
575424301 20070501
192939801 20070101
192939801 20070501
458645001 20070101
458645001 20070501
Hi,
how do i calculate rowsize for user tables in a database
Thanks in advance.....
jfk
I have a SQL2000 database where the developers have a tool which creates screens and tables at the same time. During cleanup (dropping of some columns in these tables) I recieved the below error message
Warning: The table '%.*ls' has been created but its maximum row size (%d) exceeds the maximum numberof bytes per row (8060). INSERT or UPDATE of a row in this table will fail if the resulting row length exceeds 8060 bytes.
Apparently the tool is not sophisticated to recognize this problem. I looked at MS KB and it stated that inserts and updates may fail due to this. I probably know the answer to this, but has anyone else encountered this before, and what if any kind of problems did it cause. I am sure it is a no-brainer that this is asking for trouble, but if anybody has any experience with this issue all input appreciated.
I'm wondering how to calculate the current possible row width if all data where filled to max. I'm just curious if I'm approaching the 8060 max.
Sql Server 2005
Thanks,
Mitch
I need to build a CTE query to find for the same Cabstamp (document) where i have different Origin.
I know that i can build this with a correlated subquery, but i´am curious about using CTE.
I post sample create Script:
create table #temp (Cabstamp varchar(10), account varchar(10),document varchar(15), origin varchar(2), debit numeric(10,2), credit numeric(10,2), datalc datetime)
insert into #temp (Cabstamp,account,Document, origin, debit, credit, datalc)
select 'ADM12345',111,'CMP-01','FO',1000,0, '20150110'
union
select 'ADM12345',112,'CMP-01','FO', 500, 0,'20150110'
union
select 'ADM12345',6811,'CMP-01','DO',0,1500,'20150110'
union
[code]....
I have 2 tables .Lets Say tableA and tableB.Both Have Columns ClaimNumber,Amount. Now, to get the matched records for these 2 tables, i wrote the following query Select * from tableA A Inner Join tableB B on A.ClaimNumber = B.ClaimNumber and A.Amount = B.Amount This query works perfectly fine and gives me only matching records, however if i want to have records which match with ClaimNumber and not with Amount i wrote something like this
Select * from tableA A Inner Join tableB B on A.ClaimNumber = B.ClaimNumber and A.Amount <> B.Amount.
And this query produces wrong results, its giving me match and also non match records.
how to write a query for my non match condition?
Looking to see if thier is a better way to find the last record entered in a group of records.
What I'm doing now is finding the max for the secound column and then doing a sub query to find the max of the third column having the second columns equal.
Table example using simplied data.
PolId
CoveragId
EffDate
Status
Limit1
2
1
9/7/2007
a
10000
2
2
9/7/2007
a
150000
2
2
10/1/2007
a
200000
3
1
9/7/2007
a
10000
The parent program addes a row every time the data is changed. To make things worst; the records arn't always in sqenal order like the above table and some time edits the row instead.
The current query returns a single value. from a single table.
Current code used in the select protion on a larger query. bpi = basicpolicyInformation.
( Select c1.limit1
From AFW_Coverage as c1
Where c1.PolId=bpi.PolId
and c1.CoverageId = (select max(CoverageId) as CoverageId
From AFW_Coverage as c
where c.PolId = c1.PolId
and c.CoverageCode = 'Dwelling'
and status <> 'D'
)
and c1.effDate = (select max(Effdate) as Effdate
From AFW_Coverage as c
where c.PolId = c1.PolId
and c.CoverageID = c1.CoverageId
)
Explain the current code. It uses the two sub queries to find the correct record ID that has the data needed.
Table :
ChangeID ChangeDate EquipmentID ModuleID EquipStatus
1 12/9/08 230 1789 Normal
2 13/9/08 450 1245 Normal
3 17/9/08 230 1789 Open
4 21/9/08 230 1899 Open
5 21/9/08 450 1674 Normal
6 22/9/08 450 2364 Normal
Given a date, what module was each equipment item in on that date?How do I get the date of the nearest previous event from a list like this? I got a query from one of the post in this Forum only using Cross Apply to find the nearest record from the above table based on Date i.e.
SELECT outerT.*
FROM your_table AS outerT
CROSS APPLY
(
SELECT TOP 1
equipment_id
, change_date
FROM your_table AS innerT
WHERE innerT.change_date <= @point_in_time
AND innerT.equipment_id = outerT.equipment_id
ORDER BY change_date DESC
) AS applicable_records
WHERE applicable_records.change_date = outerT.change_date
The problem is I need to get this query without using Cross Apply as i need to use the same for the LINQ which doesn't support Cross Apply.
The "Last" function in the query below (line 4 & 5) is not exactly what I'm after. The last function finds the last record in that table, but i need to find the most recent record in the table according to a date field.
Code:
SELECT
tblinmate.statusid,
tblinmate.activedate,
Last(tblclassificationhistory.classificationid) AS LastOfclassificationID,
Last(tblsquadhistory.squadid) AS LastOfsquadID,
tblperson.firstname,
tblperson.middlename,
tblperson.lastname,
[Code] ....
The query below finds the most recent record in a table according to a date field, my problem is i dont know how to integrate this Query into the above to replace the "Last" function
Code:
SELECT a.inmateID,
a.classificationID,
b.max_date
FROM (
SELECT tblClassificationHistory.inmateID,
tblClassificationHistory.classificationID,
[Code] .....
I have the following tables:
--acts as a transaction table
CREATE TABLE #TestData (
id int not null identity(1,1) primary key,
account varchar(10) not null,
deposit int not null
[Code] ....
--desired results
-- within each account group, when a individual record causes the groups running total to exceed the group's budget, show the difference that causes the groups running total to exceed the budget as unbudgeted. The amount of that transaction upto the budget amount show as renewal. For any succeeding individual records in the group, the amount of that transaction is Unbudgeted.
Here's the SQL I have thus far...
SELECT a.id
,a.account
,a.deposit
,a.total
,a.budget
,case when a.total <= a.budget
[Code] ....
I seem to be able to see where a procedure is being recompiled, but not the actual statement that was executing the procedure.
Note, with 2008 there is a DMV called dm_exec_procedure_stats , which is not present in 2005
USE YourDb;
SELECT qt.[text] AS [SP Name],
qs.last_execution_time,
qs.execution_count AS [Execution Count]
FROM sys.dm_exec_query_stats AS qs
CROSS APPLY sys.dm_exec_sql_text(qs.sql_handle) AS qt
WHERE qt.dbid = DB_ID()
AND objectid = OBJECT_ID('YourProc')
The above shows results that include the CREATE PROCEDURE statements for the procedure in question, but this only indicates that the procedure was being recompiled, not necessarily that it was being executed?
Currently I have the following stored procedure which simply adds a new row in my SQL Express 2005. What I want is that -1). before inserting the record find out the new ID (primary key) value. (ID is automatically a sequential integer generated by SQL Server)2). and set COMPANY_ID = (new) ID Any thoughts? Thanks ALTER PROCEDURE usp_tbl_Company_Insert @Company_ID int, @Name varchar(200), AS<FIND THE NEW ID of the new row in the database> @Company_ID = (new ID) INSERT INTO tbl_Company (Company_ID, Name,)VALUES (@Company_ID, @Name)
View 1 Replies View RelatedI have a table full of service invoice records. Some of the invoices are continuous, meaning that there may be an invoice from 01-16-2015 through the end of that month, but then another invoice that starts on feb 1 and goes for 6 months.
I want to only pull the most recent. Keep in mind that there may be other invoices in the same table for a different period. An example might be:
FromDate ToDate Customer Number Contract Number
02/01/2015 07/31/2015 2555 456
01/15/2015 01/31/2015 2555 456
04/01/2013 09/30/2015 2555 123
03/13/2013 03/31/2013 2555 123
From this table, I would like a query that would give me this result:
01/15/2015 07/31/2015 2555 456
03/13/2013 09/30/2015 2555 123
There will likely be more than just 2 consecutive records per contract number.
I have the table with the similar set of records which mentioned below, find the time difference between two rows of record. By Using the MsgOut column i have to find time taken b/w PS & PV and some record doesnt have PV .
LogID LocIDClientCert MsgType MsgOutMessageTimeStamp System
1151334934NOT SPECIFIEDQ_T12PS 2015-10-01 00:00:40.980AHR
1151335243NOT SPECIFIEDD_T12PV 2015-10-01 00:00:53.800AHR
1151342944NOT SPECIFIEDQ_T12PS 2015-10-01 00:05:40.957AHR
1151343281NOT SPECIFIEDD_T12PV 2015-10-01 00:05:53.670AHR
1151350046NOT SPECIFIEDQ_T12PS 2015-10-01 00:10:40.970AHR
1152760563759NOT SPECIFIEDQ_T12PS 2015-10-01 15:28:29.617AHR
1152760739690NOT SPECIFIEDQ_T12PS 2015-10-01 15:28:33.633AHR
So I have a query that need to find the most recent datetime record each day for a customer. So I have a query that looks like this:
SELECT
dhi.[GUID],
dhi.[timestamp],
la.[bundle_id],
dhi.[value]
FROM
[dbo].[DecisionHistoryItem] as dhi WITH(NOLOCK)
[Code] ....
I have a client who needs to copy an existing sale. The problem isthe Sale is made up of three tables: Sale, SaleEquipment, SaleParts.Each sale can have multiple pieces of equipment with correspondingparts, or parts without equipment. My problem in copying is when I goto copy the parts, how do I get the NEW sale equipment ids updatedcorrectly on their corresponding parts?I can provide more information if necessary.Thank you!!Maria
View 6 Replies View Related