For demonstration I created a fulltext index on table employee in Northwind database.
The following query gives an error:
SELECT * FROM employees
WHERE CONTAINS (FirstName, 'Barbe')
Replacing 'Barbe' by 'Barb' or other words it works fine.
The error message is (I have a french version of SQL installed, here the translation: "A clause in the query contains only ignored words"
Une clause de la requête ne contient que des mots ignorés)
Language for wordbreak in fulltext index is French and the error happens only with French, with English it works.
Hello.. When I used Microsoft SQL Server 2005 Management Studio Express to Create FULL TEXT INDEX by this code:
CREATE FULLTEXT INDEX ON txtfilestbl(txtfile) KEY INDEX PK_txtfilestbl ON ForumsArchiveLibCtlg WITH CHANGE_TRACKING AUTO
It returns this ERR MSG:
Informational: No full-text supported languages found. Informational: No full-text supported languages found. Msg 7680, Level 16, State 1, Line 1 Default full-text index language is not a language supported by full-text search.
I Use same this code to create FULL TEXT INDEX by using Microsoft SQL Server 2005 Management Studio, and it was working properly. What I have to do?
I've got fresh Installed SQLExpress 2005 Adv. with a following: WinXP Pro, Developer PC, Admin/Full rights, Antivirus PC-Cilin was switched off for the installation.Enable User Instance - 0 (clear check box during installation)SQL Collation: Dictionary order case sensetive for1252 Char setSELECT @@language: us_englishcreate fulltext catalog testAPFullTextcatalog, Sp_help_FullText_catalogs: 5 testAPFullTextcatalog C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData estAPFullTextcatalog 0 0create unique index indexName_Comment on dbo.FullTextSearchTestTable(RecordID) sp_configure: allow updates 0 1 0 0 clr enabled 0 1 0 0 cross db ownership chaining 0 1 0 0 default language 0 9999 0 0 max text repl size (B) 0 2147483647 65536 65536 nested triggers 0 1 1 1 remote access 0 1 1 1 remote admin connections 0 1 0 0 remote login timeout (s) 0 2147483647 20 20 remote proc trans 0 1 0 0 remote query timeout (s) 0 2147483647 600 600 server trigger recursion 0 1 1 1 show advanced options 0 1 0 0 user instances enabled 0 1 0 0 user options 0 32767 0 0CREATE FULLTEXT INDEX ON dbo.FullTextSearchTestTable(Comment) KEY INDEX indexName_Comment ON testAPFullTextcatalog WITH CHANGE_TRACKING AUTO Result: Informational: No full-text supported languages found. Informational: No full-text supported languages found. Msg 7680, Level 16, State 1, Line 1Default full-text index language is not a language supported by full-text search.
I couldn't overcome the issue. Please help.
Alexei
P.S. May be Important: During installation (on Management Studio Express installation stage) a had to click twice the "Ignore" button for the following popUp message: "Could not write value to key: SoftwareClasses.xdropenWithProgIdsShared - verify, if you have sufficient access to hot key or contact your support.
I'm about ready to smash my computer. I've installed SQL Server 2005 Express Edition with Advanced Services on Win XP Pro SP2. I made sure to enable the Fulltext service at install. Installed to the default instance name, and made sure the fulltext service is running from the CM. I made sure to enable full text indexing on my database from the properties window. I can create the fulltext catalog, but not the index!
----
create fulltext index on [person.contact] (Lastname)
key index [PK_Person.Contact] on myfulltextcatalog
Informational: No full-text supported languages found.
Informational: No full-text supported languages found.
Msg 7680, Level 16, State 1, Line 1
Default full-text index language is not a language supported by full-text search.
----------------------------------------------
select * from sys.fulltext_catalogs
returns the catalog
----------------------------------------------
sp_fulltext_service 'update_languages'
Informational: No full-text supported languages found.
----------------------------------------------
select @@language
us_english
----------------------------------------------
select * from sys.fulltext_languages
Returns an empty table
----------------------------------------------
SELECT * FROM sys.configurations
ORDER BY name ;
1126 default full-text language 1033 0 2147483647 1033 default full-text language 1 1
----------------------------------------------
Does anyone have any idea what's going on? I've already removed and re-installed a couple of times to different directories, used different instance names, and still no luck. Any help would be greatly appreciated.
Hello all,I'm wanting to do a CONTAINS query on fields that belong to two seperate tables. So, for example, this is what I'd *like* to do :SELECT ci.itemNameFROM Content_Items ciINNER JOIN Content_Pages AS cp ON ci.contentItemId = cp.contentItemIdINNER JOIN FREETEXTTABLE(Content_Items, (ci.title, cp.pageText), @searchString) AS ft ON ci.contentItemId = ft.[KEY]However, this will not work, since SQL Server won't let you do fulltext queries against more then one table.So my idea is to create a view that combines my Content_Items table with the desired column from my Content_Pages table. I would then create a fulltext index on this view, and do fulltext queries against it.It seems like this should work. However, when I try to create a fulltext index on my newly-created view, I get this error :A unique column must be defined on this table/view.How do I create a unique column within a view?Also, will my approach work, or will it have unintended consequences? I'm using this as part of a search component in my software, so it has to perform reasonably well.
Hello, i have a database with about 300.000 entries. The database gets about 30 new entries every day. The Database has an FulltextIndex on several columns. This FulltextIndex will be updated every night. But now i have found out, that the fulltextsearch doesn't work anymore for all entries that where added after April 2006. When i for example make following sql-statementSELECT id,date FROM MyTable WHERE (CONTAINS((columnA),' "mykeyword" '))
i only get results that have a date after April 2006 (although there are matching entries after that date). What can the reason for that be? According to Management Studio the last Update of the FulltextCatalog has been made on 1st of December 2007. Everything looks normal and I didn't find any logs that are saying that there has been any errors. Where do I have to look to be sure if the FullTextIndex does work? Specs: SQL Server 2005 Microsoft SQL Server Management Studio 9.00.1399.00Microsoft Analysis Services-Clienttools 2005.090.1399.00Microsoft Data Access Components (MDAC) 2000.086.3959.00 (srv03_sp2_rtm.070216-1710)Microsoft MSXML 2.6 3.0 6.0 Microsoft Internet Explorer 6.0.3790.3959Microsoft .NET Framework 2.0.50727.832Operating System 5.2.3790
SQL Server 2005: Anyone know how best to rewrite this SQL string to perform a weighted search on my table? here's my code: SQL="SELECT RecipeName FROM recipeList WHERE FREETEXT(*,'ISABOUT " & ing01 & " WEIGHT (.1) or " & ing02 & " WEIGHT (.2) or " & ing03 & " WEIGHT (.3) or " & ing04 & " WEIGHT (.4) or " & ing05 & " WEIGHT (.5)')" the idea is to get a list of recipes most pertinant to the ingredients entered. table 'recipeList' contains the ingredients in several columns. so column 2 might say '5oz of flour', column 2 - '2oz butter' etc.
at the moment it returns the correct recipes but not in the right order. If I use 'CONTAINS' it returns nothing. hope that's not too vague!
I'm wanting to do a CONTAINS query on fields that belong to two seperate tables. So, for example, this is what I'd *like* to do :
SELECT ci.itemName FROM Content_Items ci INNER JOIN Content_Pages AS cp ON ci.contentItemId = cp.contentItemId INNER JOIN FREETEXTTABLE(Content_Items, (ci.title, cp.pageText), @searchString) AS ft ON ci.contentItemId = ft.[KEY]
However, this will not work, since SQL Server won't let you do fulltext queries against more then one table.
So my idea is to create a view that combines my Content_Items table with the desired column from my Content_Pages table. I would then create a fulltext index on this view, and do fulltext queries against it.
It seems like this should work. However, when I try to create a fulltext index on my newly-created view, I get this error : A unique column must be defined on this table/view.
How do I create a unique column within a view?
Also, will my approach work, or will it have unintended consequences? I'm using this as part of a search component in my software, so it has to perform reasonably well.
I just tried to backup a database I recently deployed to to SQL Server 2005 box, and got the following error:
The backup of full-text catalog 'myCatalog' is not permitted because it is not online. Check errorlog file for the reason that full-text catalog became offline and bring it online. Or BACKUP can be performed by using the FILEGROUP or FILE clauses to restrict the selection to include only online data.
I don't need the index so I tried to drop it with both:
DROP fulltext catalog 'myCatalog'
and
DROP catalog 'myCatalog'
but both give me a syntax error.
How can I get rid of this index so I can backup my database?
We are designing a scenario in which we will have a central publisher and several subscribers in a server to server environment using Merge replication. We also will have a fulltext index for one of the tables being replicated and synchronized. What are your recommendations for the index? Would auto change tracking reduce the impact? We are building for a possible 1 billion row table but do not anticipate more than 100K rows at any time of replication.
I'm wanting to do a CONTAINS query on fields that belong to two seperate tables. So, for example, this is what I'd *like* to do :
SELECT ci.itemName FROM Content_Items ci INNER JOIN Content_Pages AS cp ON ci.contentItemId = cp.contentItemId INNER JOIN FREETEXTTABLE(Content_Items, (ci.title, cp.pageText), @searchString) AS ft ON ci.contentItemId = ft.[KEY]
However, this will not work, since SQL Server won't let you do fulltext queries against more then one table.
So my idea is to create a view that combines my Content_Items table with the desired column from my Content_Pages table. I would then create a fulltext index on this view, and do fulltext queries against it.
It seems like this should work. However, when I try to create a fulltext index on my newly-created view, I get this error : A unique column must be defined on this table/view.
How do I create a unique column within a view?
Also, will my approach work, or will it have unintended consequences? I'm using this as part of a search component in my software, so it has to perform reasonably well.
Our production DBs are SQL Server 2000(Enterprise Edition) on Windows2003. Can anybody tell me how can I check whether a table has a FullText Index or not?
I am running a DB with 250Gb of documents, the fulltext index just keeps growing and growing. The files in the MssearchCatalogDir folder is currently taking up 106Gb, it was only 74Gb this morning. The full text catalog size property says its only 53.6Gb and this is remaining steady while the files in the MssearchCatalogDir folder seem to be balloning out of control. I ran a reorg on the fulltext catalog and it did not alter the file space (actually increased it).
There is one *.ci file that is doing most of the growing, its about three times as big as the second biggest one and is expanding before my eyes.
Should I have turned population off when I did the reorg?
Manamgement studio has an Optimize catalog option on the fulltext catalog properties dialog, is this different from a fulltext catalog reorg? Should I run this.
Should I run a shrink file on the filegroup containing the fulltext catalog (the filegroup itself is very small, all the space is in the MssearchCatalogDir folder)?
I have 140Gb left on this drive, is it just going to keep on expanding until I'm out of room, I just dont know what I should do.
Abit more info.....
I was rebuilding the index from scratch (needed to move it to another filegroup).
When I first started the rebuild, msftesql.exe and msftefd.exe were both taking alot of cpu and the overall cpu usage was high. Now after 12 hours, only msftesql.exe is running and is taking up 5-10% cpu. Could it be that the rebuild is not complete yet? Although the Item Count property of the full text catalog does seem to indicate that all documents have been processed, the processes keeps running and disk space keeps going down.
I have a problem restoring a Read-Only filegroup in a database. I've restored the Read/Write filegroups first without any problem.
Then, I am able to recover Read-Only filegroups which do not contain fulltext indexes with the command : RESTORE DATABASE GSM FILEGROUP = 'FG_RO_20080214' WITH RECOVERY
However, for filegroups containing FullText indexes (Fulltext indexes are in the same filegroup as data used for this index), I always get the following error :
Server: Msg 3149, Level 16, State 6, Line 1 The file or filegroup "sysft_CAT_SM_20080127" is not in a valid state for the "Recover Data Only" option to be used. Only secondary files in the OFFLINE or RECOVERY_PENDING state can be processed. Server: Msg 3013, Level 16, State 1, Line 1 RESTORE DATABASE is terminating abnormally.
If I'm looking at sys.database_files catalog view, I can see the following name type_desc state_desc ------------------------ ----------- ----------------- sysft_CAT_MS_20080127 FULLTEXT RECOVERY_PENDING
How can i enable my fulltex change-tracking and update-index in my table? I recreated my fulltext catalog and start the full population, but although my fulltext index status shows active, my full-text change-tracking and the update index were disabled. - and I don't know how to enable them. Thanks in advance
I am using SSIS to replace set of tables daily. One of the table has primary, unique, foreign keys and full-text index. Before truncating, I am dropping the foreign key constraints (to truncate the parent table), truncating the tables and recreating the foreign keys.
I have few questions:
1) Do I need to drop and recreate the unique key as well? (I am not dropping the primary key) - Unique key is identity column created just for the full-text indexing since it was mentioned that key on integer is better than key on varchar and my pk is a varchar.
2) Do I need to drop and recreate the full-text index or just rebuild/repopulate it every time the table is loaded.
This is the first time i am using full text index and I was able to learn a lot about it from the sites. I would like to understand the correct approach while loading the tables.
We have a table that is Full Text Search index enabled on one column.This table has 200 lakhs of rows(20000000) . ContainsTable() function is searching data with in these 200 lakhs of rows(20000000), if any new rows are inserted then the ContainsTable is not going to search in these recent inserted rows.
We observed when we try for a data to search. it is returning the rows till the rows that are inserted date is less than 30th of march 2012. but not searching in the records that are created after April month , if even the data we are searching is available .
TableFulltextItemCount is around 2.2 crores.
Then we done rebuilt the FT catalog Index. then the TableFulltextItemCount became 0.Again we run the containstable query ,but still it is not getting results.
As the no of rows are very more . so i am not able to show the actual rows from which the data is not coming.
the below query gives 2 results that are from actual base table
HTML Code: select * from g_case_action_log where cas_details like '%235355%' and product_id = 38810
To search for the same above word using FTS,I have used the query as below
HTML Code: SELECT Distinct top 50 cal.case_id,cal.cas_details From g_case_action_log cal (READUNCOMMITTED)inner join containstable(es.g_case_action_log, cas_details, ' ("235355" OR "<br>235355" OR "235355<br> ") ') as key_tbl on cal.log_id = key_tbl.[key] Where cal.product_id = 38810 ORDER By cal.case_id DESC
I have attached one sql script file for your ref that contains create logic and index schema properties
I got this error report "The string was not recognized as a valid DateTime. There is a unknown word starting at index 0." at this line of code in BOLD.
For some reasons the datetime format in the database has the (US datetime format - 05/02/2008 06:40 instead of United Kingdom (UK date time format - 02/05/2008 06:40), as I had planned. I have tried to reformat the database and VB date format and all to no success.Could this be the root of my problems?
Code Snippet Public Class Form1
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
If con.State = ConnectionState.Open Then con.Close() con.Open() cmd = New SqlCommand("SELECT REM_NOTE, REM_DATE FROM dbo.MY_CONTACTS", con)
Dim sdr As SqlDataReader = cmd.ExecuteReader While sdr.HasRows = True
Dim newAlert As New Alert(Reminder_data_reader("REM_NOTE").ToString(), DateTime.Parse(Reminder_data_reader("REM_DATE").ToString())) Me.collectionOfAlerts.Add(newAlert)
Hi,I'm doing a search function for recipe database and have the query:1 SELECT K.RANK, tRecipe.sHeadline, tRecipe.sIngredients, tRecipe.sImagePath 2 FROM tRecipe 3 INNER JOIN 4 FaktaRecipe ON tRecipe.iRecipeID = FaktaRecipe.iRecipe 5 INNER JOIN 6 CONTAINSTABLE(tRecipe, *, 'ISABOUT (chick* WEIGHT(0.2))') AS K 7 ON tRecipe.iRecipeID = K.[KEY] 8 WHERE (FaktaRecipe.iRecipeFakta = 5) 9 ORDER BY RANK DESC I want to return records like 'chicken pie' etc, hence using the wildcard in chick* BUT the wildcard doesn't work! It works fine if I use the whole word 'chicken' but of course a user won't always do that... I am using SQL server 2000. Any ideas? - I'm tearing my hair out! Thanks,Paul
We have a sql server 2000 active/passive cluster running on Windows Server 2003 and within the last 6 months have started getting the following errors which eventually cause the SQL Resource Group to failover.
An error occurred in the configuration monitor for instance <SQL Server Fulltext>: 80070005 - Access is denied.
SQL is at the latest service pack/hotfixes. (8.00.2187)
This cluster has been running fine for the past 3 years with no problems. Nothing has changed on the servers.
We've had Symantic Antivirus running on the servers for a long time but the FTDATA folder and the sql data and transaction logs are excluded and nothing has changed on the configuration.
We also run Diskeeper 2007 server on these servers but I can't see any problems with this.
Once it fails over it will run fine for several days and then the same errors will occur and it fails over again.
Any ideas on what might be causing this? I can't really find anything on the Microsoft site that matches this error.
Note: This has also just started happening on our test cluster which is an identical configuration.
i cannot seem to get rid of this error. My page works in other functions that have the same syntax and format. just this one doesnt. i tried changing the format but still the same thing. SQL DB is DateTime. Any Suggestions?
Function UpdateException(ByVal qID As String, ByVal exception_Status As String, ByVal completed As String, byval notes as string, byVal Username as string) As Integer dim strDate as date = datetime.now() dim strdate1 as string = strDate.tostring("MM-dd-yy") Dim connectionString As String = "server='servername'; trusted_connection=true; Database='CPD_Reports'" Dim sqlConnection As System.Data.SqlClient.SqlConnection = New System.Data.SqlClient.SqlConnection(connectionString)
Dim queryString As String = "UPDATE [Master_CPD_Reports] SET [Exception_Status]=@Exception_Status, [Completed]"& _ "= @Completed, [Completion_Date]= @Completion_Date, [Username]= @Username WHERE ([Master_CPD_Reports].[QID] = @QID)" Dim sqlCommand As System.Data.SqlClient.SqlCommand = New System.Data.SqlClient.SqlCommand(queryString, sqlConnection)
sqlCommand.Parameters.Add("@QID", System.Data.SqlDbType.VarChar).Value = qID sqlCommand.Parameters.Add("@Exception_Status", System.Data.SqlDbType.VarChar).Value = exception_Status sqlCommand.Parameters.Add("@Completed", System.Data.SqlDbType.VarChar).Value = completed sqlCommand.Parameters.Add("@Completion_Date", System.Data.SqlDbType.varchar).Value = strDate1 sqlCommand.Parameters.Add("@Username", System.Data.SqlDbType.DateTime).Value = UserName dim NotesUpdate as string = "INSERT INTO [CPD_Notes] ([qID], [Notes], [Notes_Date], [Username]) VALUES (@qID, @notes, @Date, @UserName1)" Dim sqlCommand1 As System.Data.SqlClient.SqlCommand = New System.Data.SqlClient.SqlCommand(NotesUpdate, sqlConnection) sqlcommand1.parameters.add("@qID", system.data.sqldbtype.varchar).value = qID sqlcommand1.parameters.add("@Notes", system.data.sqldbtype.varchar).value = notes sqlcommand1.parameters.add("@UserName1", system.data.sqldbtype.varchar).value = Username sqlcommand1.parameters.add("@Date", system.data.sqldbtype.datetime).value = DateTime.now() Dim rowsAffected As Integer = 0 trace.warn(strdate1)
sqlConnection.Open Try rowsAffected = sqlCommand.ExecuteNonQuery Finally End Try
I am with the response time for a simple count on a fulltext search that is too slow.
Even using the most simple query on a good server (64 bit Dual Opteron 4GB Ram with high speed 16 raid disk storage)):
select count(*) from content_books where contains(searchData,'"english"') Takes 4 seconds to count the avg 500.000 resultsI have removed all the joins with real table data so that the query is only inside the fulltext engine..
I would expect this to be down to 4 milli seconds. Isn't it just getting the size of the "english" word result index?
It seems the engine is going through all the results because if a do a more complex search that returns less results the performance is better.
Any clues of how to do this faster? I never read the thousands of records BUT i need to count them...
After creating an IN clause from a bunch of character strings created by aWord macro, Query Analyzer complains about a syntax error. The macro takes acolumn full of character strings and wraps apostrophes (single-quotes)around each string and adds a comma to the end of each line, ready to pasteinto a Query Analyzer session. The problem is that Query Analyzer doesn'trecognize the MS-Word apostrophes. It has nothing to do with the standardapostrophe/quote problems that some people face when dealing with embeddedquotes.Can anyone suggest how to produce single-quote characters in MS-Word thatQuery Analyzer understands?Thank you.
Hi can anybody give me a simple example to check exact match word using sql sever Ex: my word is like this : welcome to sql sever2005 Now i want to find server how it is possible? I tried like this select * from test where content like %server% . but is gives me possible result. But i dont want like this if i have an exact match with that key word then only i want possitive result. Actually there is no word with server, i'm having only server2005 . So how can I get it?
Hi allThis should be easy for one of you pros out there...I take a single string(one letter) from a textbox and want to query mydatabase for a name that starts with that letter.I know that the correct synthax when you know the letter is:WHERE FirstName LIKE 'O%'but when I have this:*****************Dim lastname As Stringlastname = txtlastname.TextDim strSQL As String = "SELECT * FROM [" & PubName & "] WHERE Last_Namelike ' txtlastname % ' "**********************************************It doesn't seem to work since my datagrid is empty afterwards. I alsotried:***************Dim strSQL As String = "SELECT * FROM [" & PubName & "] WHERE Last_Namelike '" & txtlastname & " % ' "****************without succes....It's probably just a synthax error on my part but I don'T know were..THanks guys!!JMT
Hey all, i'm making the pages meta keywords on my site dynamic, and i was wondering is there is a string, for example "Dell 17" Monitor Brand New", that would split it into each word for the meta keywords. example "Dell, 17", Monitor, Brand, New" (and possibly to not put a comma on the last word?)
select updatedb.callref, updatedb.updatetxt, updatedb.udsource, opencall.suppgroup from updatedb left join opencall on updatedb.callref=opencall.callref
where udindex = '0' and suppgroup = 'SUPPORT' and (updatetxt like '%' + @Word + '%')
And opencall.status <> '17'This means that when they search for items and they separate each word it is "and" between each one.
They would like it to be more fuzzy with "and" and "or". How can I adapt this?
What I really need is to find the entries that have the word LVAD but on either side there should be a space chartacters.In other words I don't want to see the following coming from the query "SILVADENE ([PHI] SULFADIAZINE)"How can we write this query to search only for any entry that has the word " LVAD " ?
Select top 100 * FROM tbl_abc where AIMS_Value like '%LVAD%'
