Hi.
I know this question has been posted before but after reading some other post I'm still a bit confuse of what to do?
In my database, I have a 3Mb data file and the transaction log file has growed to 500Mb and keep growing... Can you please advise what I should do to reduce it size and/or stop it from continue growing?
Thanks for your help.
Hello,
What if there are uncommited transactions in the log and backing up the database/logs does not trunicate the log and it still grows?
Thanks
wade
I upgraded from SQL 6.5 to SQL 7 last month, and so far, everything's
been going fine.
However, I'm not using my old SQL 6.5 backup scripts, which, when the
backup was done, would dump the transaction log with TRUNCATE_ONLY, shrinking
the log size.
My SQL 7 server is set up with a Maintenance Plan which does everything,
including backup, but the log file seems to be growing and growing. I'm
up to 4.5 gigs now, for a database with a data file of 3.5 gigs.
How do I "dump transaction with TRUNCATE_ONLY" on a SQL 7 database?
Thanks,
Todd Wallace
I wonder if anyone could explain why when monitoring the transaction log size it doesn't appear to be growing! I'm using the following code to test image data types with logging.. I've got 'Truncate log on Checkpoint' switched off and 'Select into Bulk copy' also switched off.
Running the following code I would expect to see the transaction log grow and grow and grow... Monitoring it using perfmon indicates that it isn't in fact logging...
DECLARE @ptrval varbinary(16)
SELECT @ptrval = TEXTPTR(pr_info)
FROM pub_info pr INNER JOIN publishers p
ON p.pub_id = pr.pub_id
AND p.pub_name = 'New Moon Books'
declare @Loop int
select @Loop = 0
While @Loop <= 10000
BEGIN
WRITETEXT pub_info.pr_info @ptrval
with log
'New Moon Books (NMB) '
select @Loop = @Loop + 1
END
Greetings,
My database has a situation where my transaction log is growing out of control. However I have not been able to figure out where any memory leaks are occuring.
Is there a way to monitor the database in order to find out at when the tlog is growing. Or even better, what sql is being executed that is causing this unreasonable tlog growth?
Thanks a million,
Roger
Hi,
I'm getting this SQL server log...
The log file for database 'P5_Nextel' is full. Back up the transaction log for the database to free up some log space
What i'm doing is, i just resizing the space allocated, but the problem is my disk is now out of space. How can i prevent this kind of problem without adding a new disk? Is there any other way?
Please advise.
Thanks!
I am having problems with the transaction log growing. I set up a maintenance plan to backup every 15 minutes. The recovery model is set to full. It is set to auto grow by 10 percent with unrestricted file growth. The space allocated is 2mb. Should this be set higher? It seems whenever I unchecked the auto shrink, the log is growing larger. The command I use to check is:
SELECT *
FROM sysfiles
WHERE name LIKE '%LOG%'
GO
This is the log size and the log space used.
1.492187538.02356
This has grown 4 percent since yesterday. Are there any good practices to maintain these log files?Any help would be appreciated.
msr976
Hi,We have created a SQL server 2000 database. We observe that thetransaction log keeps growing over time. We are now about to run out ofspace. We have been periodically shrinking the database. Neverthelessthe size has increased. I would imagine that a transaction log can beeliminated if we stop the database. Can that be done? Is there a way tocompletely wipe off the transaction log?Thanks,Yash
View 4 Replies View RelatedI have to admit, I'm usually using the MySql database, but in this particular case I have to use MSSQL 2000.
Over to my problem.
I'm building a web-based system (who isn't these days) in which the user types arbitrary information that is published when the user pushes the save button. Nothing new about that.
Here comes the tricky part, when the user wants to edit an existing item I copy all information in the database and sets the id of the 'edit-copy' to the negative value ( id 45 becomes id -45 for the edit-copy). This is also done on all items in other tables that is connected to the main item.
This way I get a copy that the user may edit without messing up the published information. When the user is done I either delete all the negative items (cancel) or delete the positive items and update the negative to become positive (save).
So far so good, allmost... my problem is that the transaction log grows tremendously.
Is there any other way to accomplish a safe edit that doesn't affect the transaction log as much as my current solution?
Could I be doing something wrong when updateing or deleteing my items?
The transaction log of a database grows until it runs out of disk space. If disk space is full, all databases on instance may get problems. Because of this i have set a limitation on how much it may grow, up to 40 GB. It grows in steps of 100 MB. It reaches its limit a couple of times a week, causing the application to hang.
The database file itself is about 2,3 GB large.
The SQL version is 10.50.4276, SQL2008R2 SP2.
The recovery model is FULL.
I have a backupjob that runs a FULL Backup at midnight.And a backupjob that runs a LOG backup every 30 minutes.Both finishes with success. However, the transaction log is never truncated, the unused space is never released.
I have checked for "long running jobs", it sometimes sys "backup_log", sometimes "active_transaction".
Could a workaround be to set the recovery mode to simple, and create a full-backup job that runs every 30 minutes for this database? It is a critical database....
Hi there,
We have a Principle, Mirror and Witness set-up and all is working fine, however, the transaction logs for a few large databases just keep growing over a the course of the month until the disk is full. As I understand it, and having tried you can't dump the transaction logs while mirroring is configured, is there any way at all to commit and truncate the logs while mirroring is running or do I have to manually remove the mirroring each month, dump the transaction logs and then re-enable it again after doing the backup/restore?
The databases in question are about 6GB in data size and the transaction logs can grow to be about 60GB in a month.
Would a normal SQL Server 2005 backup truncate the logs if I configured this? At the moment we use Litespeed for SQL server for nightly backups.
Any advice would be very helpful.
Thanks
Ed
Hi there - I have an sms server which uses a sql 7 database. The transaction log on it keeps growing at an incredible rate (about 1gb p/w). The database was successfully backed up yesterday, and I thought that should delete the inactive entries in the log. Can someone tell me some steps to do reduce it to a regular size?
thanks for any help
Jonathan McCrea
I am running Microsoft SQL 2005 Express.
The transaction log of the main database has gotten huge and I just noticed it because the disk is nearly out of free disk space.
The database data file is 46MB and the transaction log is 210GB. This happended because autogrowth was on, and no limit was set I suppose.
So my goal is to knock this thing down to size, and set the max size of the transaction file to like 5GB.
I CANNOT do a backup of the transaction log because I do not have enough free space for such an operation. I tried doing:
DUMP TRANSACTION dbName
No luck, got the following error: Backup or restore requires at least one backup device.
Can I just stop the service and manually DELETE the transaction log file?
Thanks for the help.
hi all,
my tlogs at the subscriber are growing very large
irregardless of my recovery mode. any help
using snapshot-push replication
thanks,
joey
hi,
we have a SQL Server 2000 database which we set to 'SIMPLE' recovery mode at 6pm (due to nightly large data loads). We revert back to 'FULL' recovery mode at 6am.
My understanding was that in 'SIMPLE' recovery mode, the transaction log would not grow because it would automatically be truncated after a checkpoint. However this is not the case. I thought perhaps it could be due to a long running uncomitted transaction, but when I ran 'dbcc opentran', the oldest running transactions doesn't last for more than a couple minutes. I manually run a 'checkpoint' command as well in the hope of forcing the transaction log truncation. I repeat this a couple of times to no avail. When I run 'dbcc sqlperf(logspace)' , I can still see the transaction log growing.
It is not until I run 'backup log db with truncate_only' that the transaction log gets truncated.
I do not understand, why the transaction log does not get automatically truncated in SIMPLE recovery mode?
Andrew
Hi,
We have configured the following in the Publisher server..
1) Merge Replication - Synchronisation to be running in the continuous mode.
2) Merge Replication - Synchronisation in Scheduled mode.
The issue that we are facing here is the transaction log file of the databases which are in replication are growing very largely. And we get this error message in the Subscriber :
Error messages:
The Merge Agent failed to retrieve article information for publication 'MCC_Pos_CashlessPub'. Increase the -QueryTimeOut parameter and restart the synchronization. When troubleshooting, use SQL Profiler or restart the agent with a higher value for -HistoryVerboseLevel and check the output log file for errors. Correct any database engine conditions that may be causing internal replication stored procedures to fail. (Source: MSSQL_REPL, Error number: MSSQL_REPL-2147201017)
Get help: http://help/MSSQL_REPL-2147201017
The transaction log for database 'tempdb' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases (Source: MSSQLServer, Error number: 9002)
Get help: http://help/9002
In fact for the past two days there are no data movement or any changes to the table, still we are able to see the growth in the transaction log file.
As mentioned in the error description when checked the log_reuse_wait_desc column of the sys.databases table, it showed the value "LOG_BACKUP". So took database backup 3 times. and took transaction log backup 2 times from the subscriber server in which the error was thrown. Still the issue persists. There is no change in the transaction log size.
What is the reason behind the growth of LDF?? Is it because of Merge Replication Configured in the server??
Kindly check and let as know regarding this issue. We are facing lot of problems because of this issue. Thanks in advance.
Regards,
Swapna.B.
What is the best way to clear the transaction logs. My backup job each night is ending because it says it is running out of disk space and I need to clear up the transaction logs. Any help is appreciated. I see many different options (trucate option, auto shrink, etc.), just need some assistance tosome more specific best approaches. Thanks
View 3 Replies View RelatedIm having issues truncating my transaction logs. I have logs in excess of 40 gigs. All the info in the BOL is very vague. Any assistance would be apreciated.
Regards
SeTi Ni
When we backup the transaction log,will it truncate the log or it will grow from there?Truncate log on check point is desabled.
Thanks!
to take the transaction log back up regularly I should have truncate log on check point false. If I do so then how will I truncate the log.
regards,
Renu
I am trying to import records via bcp (about 1,500,000 records) and I keep running out of disk space. Is there any way to limit or do away with the transaction log (and still be able to import)?
View 2 Replies View Relatedhow do i decrease the transaction log example 500mb to 100mb, can you help me with the syntax pls!!
View 1 Replies View RelatedI need to move transaction logs to a different drive and am looking for a way to do it without detaching the db.
Can I create a second transaction log file for the DB and then delete the original log file?
What is the best way to do this for db's that are being replicated?
Thanks,
Ken Nicholson
I need to seperate my SMS data files and transaction logs onto two seperate drives. Can anyone assist me with this?
thanks...
HELP!!!!
When I look at the Database maintience plan history entry for backup I have a message that reads: "Backup can not be performed on this database. This sub task is ignored".
Have anyone come across this error before?? As part of the Maintenance plan some transaction log are being backup and some aren't instead they receive the message above.
Thanks
Lystra
Has anyone ever had the problem of the IT department not backing up thier transaction logs simply because they didnt find it necessary??
View 3 Replies View Relatedi have several sql servers doing maintenance plans and backing up the transaction logs to tape. unfortunately it seems that the server keeps adding the transaction logs to the same tape, without overwriting them. Nowadays a transaction log backup to disk takes 2 minutes but when done to tape it is taking up 1hr54minutes. What can i do so that the tape is automatically initialised without having to do it manually... Thanks
View 1 Replies View Relatedi was wondering if smeone could give me a breif over view how far back do these go
View 12 Replies View RelatedHI All,
Is this is a good idea or not?
If i attached my SQL Server to SAN only for DATA and LOG (Ldf) drives
through the FC. then we put *.bak and *.trn on to local disk RAID 1 drive?
Any performance isues?
Is there a way to view the transactions from a .TRN transaction log file? If so can I overwrite some of the transactions on the file and then restore from it? I am just curious.
View 2 Replies View RelatedHi, I know just about nothing about SQL Server. I am getting this error:The log file for database 'my_database' is full. Back up the transaction logfor the database to free up some log space.I can't access the transaction logs to back them up. I am told that my ISP'stech support should have it set up to shrink those logs automatically everyso often. Is that true?Why are they needed? Up till Monday, the logs are just of our getting SQLServer set up, so couldn't the logs just be deleted? Most of my site can'trun with this problem.I'd appreciate any enlightenment anyone can give me!Thanks, Jill
View 1 Replies View RelatedThis seems like it'd be a really stupid question, but for the life of me Ihaven't been able to find an answer that works....I have a database that's approximately 400MB when shrunk... and thetransaction logs are at about 4.8GB when shrunk... I can't seem to get thetransaction log any smaller, no what I try. How can I get the log downbelow 1GB and keep it there? I've only got an 18GB hard drive and I need torun 2 copies of this database.-steve
View 4 Replies View RelatedHello,
I am trying to figure out the time a certain store procedure was executed. I know the SP's name and approximetly the time it was executed. Is this possible to do?
Honestly, i am not sure if SQL server 2005 is smart enough to keep track of commited transaction on the server.
Any suggestins?
Thanks