Hi all,
i am trying to consume an webservice which under secure layer (HTTPS)
eg: https://test.com/test.asmx
i'm connected thro' a proxy server.
when i use the same url in IE it works fine, but when i connect thro' http connection manager it always throws me a error saying "unable to connect to remote server "
can anyone provide me solution to over come this problem
Server Error in '/Dive' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
this is the error message I found when I run my asp.net application and the connection string as follows:
<add key="ConnectionInfo" value="Server=(local);Database=Dive;Trusted_Connection=yes;" />
can someone tell me how to connect and how to specify username and password in Visual Web Developer 2005 Express Edition..........
I'm a little bit new on VWD 2005 I need an assistance on it.
Hi all,
This one has really stumped me! I set up HTTP to connect to an Analysis Services cube within an ASP .NEt application. On inititial setup it worked well and I was able to connect and view the data in my ASP application.
However, for NO reason that I can see it is now coming up with the following error:
Either a connection cannot be made to the localhost server, or Analysis Services is not running on the computer specified.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Runtime.InteropServices.COMException: Either a connection cannot be made to the localhost server, or Analysis Services is not running on the computer specified.
I have tried everything I can think of to fix it but can't get it to work. I have even gone through the technet document titled "Resolving Common Connectivity Issues in SQL Server 2005 Analysis Services Connectivity Scenarios" but it hasn't helped.
I am using SQL Server (Analysis Services) 2005 and ASP .NET 2.0. The application is developed in VS 2005.
I'm at a loss...can you help?
Cheers in advance!
I am just about ready to tear my hair out on this one, at this point you guys are my last resort! Wouldn't it be nice if I could go to bed and have an answer for me in the morning....
I've had a working HTTP endpoint using Basic Authentication over SSL for months in our development environment, but now I'm moving our application to a production server and I'd like to be able to use Digest Authentication in the clear instead so the processor doesn't waste cycles on the SSL decryption. I've spent hours fiddling with my endpoint to no avail.
This is the closest message relating to what I'm doing that I've been able to find: http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1131251&SiteID=1
In my case, the SQL Server is joined to a domain that is entirely Windows Server 2003 - no Windows 2000, so support for Digest Authentication is a non-issue. I'm also explicitly doing a GRANT CONNECT on my endpoint to the domain user I'm using. Here is the top of my CREATE ENDPOINT DDL:
CREATE ENDPOINT [Kudos]
STATE=STARTED
AS HTTP (PATH=N'/Kudos',
PORTS = (CLEAR),
AUTHENTICATION = (DIGEST,NTLM),
SITE=N'echobase.kudosnow.com'
DEFAULT_LOGON_DOMAIN = N'kudosnow',
AUTH_REALM = N'kudosnow'',
CLEAR_PORT = 80,
COMPRESSION=DISABLED)
FOR SOAP (
I am debugging using wfetch 1.3... I can get this to work using NTLM Authentication; sending a GET to my endpoint with the ?wsdlsimple querystring parameter returns my WSDL just fine.
But Digest just doesn't want to work! If I remove NTLM from my AUTHENTICATION directive and try using Digest with wfetch or from my (PHP) web service consumer I get an HTTP 401 no matter what I do. I've tried fiddling with the DEFAULT_LOGON_DOMAIN, AUTH_REALM, and anything else I can think of.
The errors I am sporadically finding in the SQL Server error log are:
HTTP authentication failed. [CLIENT: 192.168.245.238] from source Logon
Followed by:
Error: 26026, Severity: 14, State: 1. from source Logon
I can't find any detail about the second error.
........
Just occurred to me that I've also been trying to view my WSDL directly in IE, and this is what's causing the SQL error to be logged, not wfetch - that's why it appeared sporadically.
So, wfetch isn't causing an 'HTTP authentication failed' error, but Internet Explorer is... maybe Digest Authentication isn't implemented correctly in wfetch?
Regardless... I'm still not able to authenticate from IE or from my client, but this may shed some more light on the issue.
Does anyone have any ideas?
My VS 2005 website project was connecting to a remote SQL Server. But after I move the database to the second SQL Server, I got the following error message from running my website project:
Named Pipes Provider: Logon failure: unknown user name or bad password.
I do everything same like what I did in the first SQL server:
Using “SQL Server and Windows� authentication and “System account�;
Create a domain account IIS_WPG;
Grant this IIS_WPG as db_owner for the database;
In web.config, add the name and password to the end of connectionstring;
Make sure the SQL Server has “Named Pipes� and “TCP/IP� protocols.
I have no idea what I can do else, anybody has suggestions?
Greetings:
We have a copy of SQL2k Report Services running on a Windows 2003 Server. But the database used by the Reports is actually on another box in our network. (This is a option you can use during install.) This setup worked fine for about a year but now neither the reports and ReportManager no longer run. The Reporting services Log error is:
System.Net.WebException: The underlying connection was closed: Unable to connect to the remote server.
In a browser we get the error:
---
"Directory Listing Denied"
"This Virtual Directory does not allow contents to be listed."
---
Turning on the option to list directory contents in IIS does not resolve the issue.
Anyone seen this creep up before? I am unaware of any changes to the machine's security in the last few weeks but something has obviously changed.
I can ping the remote servers where the DB's are stored.
I am using Windows Integrated Authentication.
I have a dev box with a similar configuration, except everything is hosted locally, and it runs fine.
Any ideas?
Thanks.
<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.2050.00</Product>
<Locale>en-US</Locale>
<TimeZone>Eastern Daylight Time</TimeZone>
<Path>C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFilesReportServerWebApp__04_07_2007_10_54_49.log</Path>
<SystemName>PC24HOURS</SystemName>
<OSName>Microsoft Windows NT 5.2.3790 Service Pack 2</OSName>
<OSVersion>5.2.3790.131072</OSVersion>
</Header>
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing ReportBuilderTrustLevel to '0' as specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing MaxScheduleWait to default value of '1' second(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing DatabaseQueryTimeout to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing ProcessRecycleOptions to default value of '0' because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing RunningRequestsScavengerCycle to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing RunningRequestsDbCycle to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing RunningRequestsAge to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing CleanupCycleMinutes to default value of '10' minute(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing WatsonFlags to default value of '1064' because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing WatsonDumpOnExceptions to default value of 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to default value of 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing SecureConnectionLevel to default value of '1' because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
w3wp!library!1!4/7/2007-10:54:49:: i INFO: Initializing WebServiceUseFileShareStorage to default value of 'False' because it was not specified in Configuration file.
w3wp!ui!1!4/7/2007-10:54:58:: e ERROR: Unable to connect to the remote server
w3wp!ui!1!4/7/2007-10:54:58:: e ERROR: HTTP status code --> 500
-------Details--------
System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.SqlServer.ReportingServices2005.ReportingService2005.ListSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()
at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level)
at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
w3wp!ui!1!4/7/2007-10:54:59:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted.
at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
-------------------------------------------------------------------------------------------------------------------------------------------------
<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.2050.00</Product>
<Locale>en-US</Locale>
<TimeZone>Eastern Daylight Time</TimeZone>
<Path>C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFilesReportServerWebApp__04_07_2007_10_41_11.log</Path>
<SystemName>PC24HOURS</SystemName>
<OSName>Microsoft Windows NT 5.2.3790 Service Pack 2</OSName>
<OSVersion>5.2.3790.131072</OSVersion>
</Header>
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing ReportBuilderTrustLevel to '0' as specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing MaxScheduleWait to default value of '1' second(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing DatabaseQueryTimeout to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing ProcessRecycleOptions to default value of '0' because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing RunningRequestsScavengerCycle to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing RunningRequestsDbCycle to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing RunningRequestsAge to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing CleanupCycleMinutes to default value of '10' minute(s) because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing WatsonFlags to default value of '1064' because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing WatsonDumpOnExceptions to default value of 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to default value of 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing SecureConnectionLevel to default value of '1' because it was not specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
w3wp!library!1!4/7/2007-10:41:12:: i INFO: Initializing WebServiceUseFileShareStorage to default value of 'False' because it was not specified in Configuration file.
w3wp!ui!1!4/7/2007-10:41:35:: e ERROR: Unable to connect to the remote server
w3wp!ui!1!4/7/2007-10:41:35:: e ERROR: HTTP status code --> 500
-------Details--------
System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.SqlServer.ReportingServices2005.ReportingService2005.ListSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()
at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level)
at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
w3wp!ui!1!4/7/2007-10:41:37:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted.
at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
w3wp!ui!1!4/7/2007-10:41:45:: e ERROR: Unable to connect to the remote server
w3wp!ui!1!4/7/2007-10:41:45:: e ERROR: HTTP status code --> 500
-------Details--------
System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.SqlServer.ReportingServices2005.ReportingService2005.ListSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()
at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level)
at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
w3wp!ui!1!4/7/2007-10:41:46:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted.
at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
w3wp!ui!1!4/7/2007-10:53:55:: e ERROR: Unable to connect to the remote server
w3wp!ui!1!4/7/2007-10:53:55:: e ERROR: HTTP status code --> 500
-------Details--------
System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.SqlServer.ReportingServices2005.ReportingService2005.ListSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()
at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level)
at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
w3wp!ui!1!4/7/2007-10:53:56:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted.
at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
w3wp!ui!5!4/7/2007-10:54:01:: e ERROR: Unable to connect to the remote server
w3wp!ui!5!4/7/2007-10:54:01:: e ERROR: HTTP status code --> 500
-------Details--------
System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.SqlServer.ReportingServices2005.ReportingService2005.ListSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()
at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level)
at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
w3wp!ui!5!4/7/2007-10:54:02:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted.
at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
Server does not exist or access is denied ...
Im trying to replicate a database (on web hosting server) my own local machine
I have successfully registered the server in enterprise manager, i know i have username/password correct [server status shows a blank white dot??]
Any ideas??? Maybe my network wont allow me, i cannot telnet to the server even specifying the particular port?
I have managed to backup the database via services provided by web hosting company, is there a way i can expand the database from this backup file using enterprise manager surely???
TIA
Hi,
iam having vs2005 installed on my machine and i also installed sqlserver2005 dev edition on my machine...Now iam devloping a Window Appplication in which I need to populate a grid from Sqlserver2000 (dev edition) which installed on remote (i.e another network)....when i try to run my application it gives me a error tht "Unable to connect to sqlserver2005".actaully i specified in my connection string to connect to Sqlserver2000 on the remote machine.
I feel to know how to enable remote connection on Sqlserver 2000.So tht i can access this sqlserver2000 from another machine
With regards
Mahender
Hi!
When trying to log into Reporting Services in SQL Server 2005 Management Studio, I receive the following error message:
TITEL: Verbindung mit Server herstellen
------------------------------
Es kann keine Verbindung mit 'RD2MWD000349' hergestellt werden.
------------------------------
ZUSĂ„TZLICHE INFORMATIONEN:
Unable to connect to the remote server (Microsoft.SqlServer.Management.UI.RSClient)
------------------------------
No connection could be made because the target machine actively refused it (System)
------------------------------
SCHALTFLĂ„CHEN:
OK
------------------------------
Has anybody had that problem before? Happens right after installation, no customisation of the SQL Server has been done yet. And I run the server on localhost.......
I've recently got a new webhosting account with hostinguk who have do the following:
We have created a SQL 2005 database for you named: DBCOX10289
and a system DSN named: DBCOX10289
To access your database you will need Microsoft SQL Server Management Studio / Express
If you do not have a copy of this you can download Microsoft SQL Server management Studio Express at the following location:
http://msdn.microsoft.com/vstudio/express/sql/default.aspx
In enterprise manager you should register the server: sql5.hostinguk.net
You will need to use the following login name and password when registering the server and accessing your database.
SQL 2005 username: COX10289
SQL 2005 password: password
To use this server within your web site code please ensure that you refer to the server as sql5.hostinguk.net
PLEASE NOTE: Do NOT use the IP address of this server directly as this will cause problems for you should we make network changes at any point in time.
I have tried and am in despair but still am unable to connect to the server. Running a XP machine In Administrative tools ODBC I have created a DSN called DBCOX10289 with the server name sql.hostinguk.net. upon completing the ODBC setup I get this:
Microsoft SQL Native Client Version 09.00.3042
Data Source Name: DBCOX10289
Data Source Description: Keystages
Server: sql5.hostinguk.net
Use Integrated Security: No
Database: (Default)
Language: (Default)
Data Encryption: No
Trust Server Certificate: No
Multiple Active Result Sets(MARS): No
Translate Character Data: Yes
Log Long Running Queries: No
Log Driver Statistics: No
Use Regional Settings: No
Use ANSI Quoted Identifiers: Yes
Use ANSI Null, Paddings and Warnings: Yes
I then click on test connection and get
Microsoft SQL Native Client Version 09.00.3042
Running connectivity tests...
Attempting connection
Connection established
Verifying option settings
Disconnecting from server
TESTS COMPLETED SUCCESSFULLY!
Whne I'm scrolling through the options in ODBC it can see all the other databases on the server.
When I then try register the server in SQL server management studio express
Servername: sql5.hostinguk.net
Authentication: SQL Server Authentication
Username: COX10289
Password : password
===================================
Testing the registered server failed. Verify the server name, login credentials, and database, and then click Test again.
===================================
Login failed for user 'COX10289'. (.Net SqlClient Data Provider)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=18456&LinkId=20476
------------------------------
Server Name: sql5.hostinguk.net
Error Number: 18456
Severity: 14
State: 1
Line Number: 65536
------------------------------
I try this servername as well: sql5.hostinguk.netDBCOX10289 and still get
===================================
Testing the registered server failed. Verify the server name, login credentials, and database, and then click Test again.
===================================
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (.Net SqlClient Data Provider)
I can ping the servername and get the IP address
I can telnet the server and port 1433 and connect successfully
The hosting company do not support sql 2005 express
I have tried researching this as much as possible, all to no avail. What can
I do?
Hi,
I€™m using a Script Component in SSIS to call a Web Service. The web service is wrapped, using the wsdl tool. The package works, on my local enviroment. Script component calls the web service and returns the data. I€™ll move the web service to another server, web service as Anonymous access is enable. Deployed the Package on a SQL server. But, when excuting the package I get the below error. I can view and invoke the web method and see data even. SSIS is running under a NT AUTHORITYNetworkService account. I know that the problem is permission, but how would I resolve the issue.
Error:
OnInformation,SERVER,DOMAINSqlAdmin,MISPackage,{190832FB-4FF1-4ECD-BF53-4A49864089B4},{D7BF27CD-BDF1-418A-ABFE-BA0A24B921FB},3/14/2007 10:59:11 AM,3/14/2007 10:59:11 AM,0,0x,System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at ScriptComponent_6386cd9eab6a49e7b1a90f69dcc24beb.Service.GetMISAccounts()
at ScriptComponent_6386cd9eab6a49e7b1a90f69dcc24beb.ScriptMain.CreateNewOutputRows()
Any Help will be appreciated
SQL Express running on Server 2003 SP1, not a domain controller - but prior to installing SQL Express, I did dcpromo promote and then demoted it back to a workgroup server.
Connecting with Vista build 5600, Studio express 9.00.2047 with MDAC 6.00.5600.1638. Server 2003 MDAC is 2.82.1830.
I came across this article on the net:
http://www.developersdex.com/sql/message.asp?p=1867&ID=%3C309C7496-F36B-4398-9C52-322E6CB8DE3B%40microsoft.com%3E
Is my mis-matched versions of MDAC causing me this grief?
Otherwise, I have remote set up for TCP and Named Pipes, I've run sp_configure 'remote admin connections', 1; my login is set to SQL Authentication with everything granted. I've tried running the service as network, local and MachineAdministrator; ports are open per:
http://support.microsoft.com/kb/555585
I wanted to ask before I start replacing the MDAC on either the Vista or Server 2003 machine... If that's the problem, which version(s) do I change? to?
Full error message:
An error has occurred while establishing a connection to the server. While connecting to SQL Server 2005, this failure may be cuased by the fact that under the default settings SQL Server does not allow remote connecitons, (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 1326)
Thanks, John
Hello Everyone,
I have a Report Server setup on my laptop (XP Pro SP2). I have developed a report which I would like to view from a Windows Forms Application (VB.NET) using a ReportViewer. When I try it from the local machine it works correctly, but if I try to connect and preview the same report from my other PC (Vista Home Premium) I am getting the "Unable to connect to the remote server. A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because the connected host failed to respond." error.
I have setup the Processing mode to Remote and correctly setup the ReportPath and ReportServerUrl using:
With rptRetEmp
.ProcessingMode = Microsoft.Reporting.WinForms.ProcessingMode.Remote
.ServerReport.ReportServerUrl = New Uri("http://192.168.1.2/CPMReports")
.ServerReport.ReportPath = "/CPM_Reports/Test"
.ServerReport.Refresh()
.RefreshReport()
End With
Where CPMReports is the Report Server virtual directory and CPM_Reports is the folder where the report Test resides.
I do not know if this has anything to do with the fact that Vista Home does not have Report Services enabled or it is just a permissions problem. I have red several posts that describe similiar problems, but I could not find a solution.
Thank you for your help.
Daniel D.
Vista + SQL Server 2005
Reporting Service Configuration Tool: No Red Cross.
http://localhost/reportserver get this error:
HTTP Error 403.1 - Forbidden
You have attempted to run a CGI, ISAPI, or other executable program from a directory that does not allow executables to run.
http://localhost/reports get this error:
w3wp!ui!4!20/02/2008-17:17:04:: e ERROR: Unable to connect to the remote server
w3wp!ui!4!20/02/2008-17:17:04:: e ERROR: HTTP status code --> 500
-------Details--------
System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 127.0.0.1:443
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.SqlServer.ReportingServices2005.ReportingService2005.ListSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()
at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level)
at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
w3wp!ui!4!20/02/2008-17:17:06:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted.
at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
I googled but not found anything useful.
Thanks in advance!!!
I'm creating a SSIS solution where I use a WebService Task to get some data from an external Web Service.
I create a "HTTP Connection Manager" for the WebService Task. I enter the correct Server URL, and in the Proxy tab I enter the correct Proxy URL. The "Test Connection" button returns a success and everything works fine....
However, when I re-open my solution after having saved it, the "Test Connection" button returns a "Unable to connect to the remote server" message. the Server URL and the Proxy URL are correct but it seems that SSIS is not using the Proxy. If I create a new package with the same Server URL and Proxy URL it works fine.
Does anyone know anything about this problem? Is it a bug in SSIS or something that I'm doing wrong?
Regards,
Olafur
Environment: SQL Server 2014 on Windows Server 2012 R2.
We have our availability group configured and working. However, when we try to connect to the AG listener from a remote server, we have to use the fully qualified domain name (FQDN) to connect. We'd like to be able to connect just using the host name. Interestingly, ping actually resolves the IP correctly for either.
At one point in my package I call a simple web service that kicks off a process on a remote server using a Web Service Task . I need to be able to point the task at a test instance while I'm testing and a different one when it goes to production. The simple answer (you'd hope anyway) is to just store the ConnectionString for the HTTP Connection Manger in Package Configurations for TEST and PROD. I did this and when the package runs, the connection manager's connectionstring does get changed, but the web service task doesn't use this value. It uses the value defined in the WSDL file which in my case contains the URL for the TEST instance.
Am I missing something obvious? Do I really have to get the WSDLs from PROD and TEST and deploy both of them to the appropriate environment? What does the ConnectionString in the HTTP Connection Manager actually do then?
Thanks for any insight you might have.
Kevin S
Hello,
I want to connect to the remote SQL server form my comupet using SQL server Enterprize manager. How cna i do that?
I realli appreciate your help.
Many Thanks.
Nitesha
I am attempting to connect to a remote default instance of SQL Server2k on Win2k using Enterprise Manager from my local host but receive a"SQL Server registration failed, timeout expired" error message eachtime.I am able to connect using Query Analyzer when specifying the IPaddress of the server (I am also specifying the IP address in myEnterprise Manager connection), am able to ping the server from thecommand line, and am able to telnet to port 1433. I have triedconnecting both before and after creating an appropriate alias inClient Network Utilities all to no avail.I ran SQL Profiler while attempting to connect and do not see theconnection attempt reach the server. What could be preventingEnterprise Manager from reaching/connecting to the server while allother utilities (including profiler) are fine?Thanks in advance.
View 1 Replies View RelatedI use SQL Server 2012 and visual studio 2010.I created SSIS Project with task "Execute Package". Control flow view as: Package1 (execute package) -> Package2 (data flow).Data flow in Package2 view as: ADO.NET source -> ADO.NET destination.
When I started Package2, it's work. I havn't errors.But when I started Package 1 I have error "Unable to get managed connection from the Connection Manager runtime". In execution log I see that ADO.NET source produced this error on verification stage. Package failed on verification stage, not on execution stage.Why when I started Package 2 it work, but when I started Package1 (and Package1 started Package2) it failed?
Hi,
I€™ve developed a BI system using the SQL Server 2005 Developer€™s Edition.
SSAS, SSIS and SSRS have been added to a SQL Server 2005 Standard Edition Server in preparation for delivering the developed database to this live environment.
So I am able to connect directly to the Database Engine, SSAS, SSIS and SSRS successfully from the actual SQL Server 2005 Standard Edition box which is sat on a Windows 2003 Server operating system.
However when I launch SQL Server Management Studio from a desk top PC which is connected to the SQL Server Standard Edition box I can€™t connect to either SSIS or SSRS, however I can connect to the Database Engine and it also seems that I can connect to SSAS OK.
I am using Windows Authentication where the I used a SQL Server account which exists with €śsysadmin€? permissions and this SQL Server account has the same login name as the Windows Server 2003 desktop login.
What do I do next please?
Hello
I am able to connect to the server and most of the time I can't connect.
It is important to be able to connect so I can manage my mdf - database.
To test ... I disable the firework but I still can't connect 90% of the time.
Thank you in advance.
~ Peaches ~
When running the project in debug mode or non-debug mode, I get the following error from MS Visual Studio:
TITLE: Package Validation Error
------------------------------
Package Validation Error
------------------------------
ADDITIONAL INFORMATION:
Error at Package [Connection manager "SYBASE_CONNECTION"]: The connection manager failed to defect from the transaction.
(Microsoft.DataTransformationServices.VsIntegration)
------------------------------
BUTTONS:
OK
------------------------------
Any ideas???
We have a problem to connect to a specific database on our local network from a specific Vista machine. Several other XP and Vista machines are able to connect to the database without any problem. However, with the two latest Vista machines we received, it is impossible to connect to the database. In Microsoft SQL server Management studio express, we have the error 26 "error locating server/instance specified". We are sure the server name we entered is correct. We suppose the server is correctly configured as we are able to connect from other computers. From the machines that are not able to connect to the database, we can connect without problem to other databases. We also see the server, where the database is, on the network servers list in Microsoft SQL server Management studio. .
The version of the components are:
Microsoft SQL Server Management Studio Express 9.00.3042.00
Microsoft Data Access Components (MDAC) 6.0.6000.16386 (vista_rtm.061101-2205)
Microsoft MSXML 3.0 4.0 6.0
Microsoft Internet Explorer 7.0.6000.16575
Microsoft .NET Framework 2.0.50727.312
Operating System 6.0.6000
We verified we have the same version of components on the Vista machine from which the connection is successful.
The network database has the version 8.0.
We are usinng sql server authentification method.
We try to specify the IP address instead of the server name in the connection string. We also tried to specify the port.
We also tried to disable the firewall.
Unfortunatetly, we are not able to connect to this database. Any suggestion ?
Hi,
I have Windows XP Home Workgroup LAN.
I am treating one of the XP Home system as 'Server' and installed SQL Express 2005 SP1. Enabled remote connections access.
I have total 4 XP Home systems, out of which one i am treating as Server, from the rest 3 computers, 2 are successfully connected to the Server and able to access SQL Express without any problems. But the 3rd system is unable to communicate with the Server. I disabled all firewalls in this 3rd system but still unable to connect to the server. I am able to ping the server, browse for shared folders on the server. Except SQL Express remote connection, everything else in the network is accessible from this 3rd computer.
Can anyone help me on how to troubleshoot this 3rd computer sql express connection problem to the server.
I don't have any error message to provide here. It just says, unable to connect to sql server, verify username/password etc.
Is there any limitation on SQL Express remote connections ?
Here is what I knew: usr/pwd, Domain, Server and Database.
How to set Enterprise Manager, then can I connect to DB ?
I am not able to connect to Remote Distributor from Publisher using Administrative Link Password. I have configured the Distributor on 1 m/c and Publisher on another m/c. When i use the wizard to configure the publisher using remote distributor. I have also specified the same Admin Password link (distributor_admin) in the distributor m/c.
Â
I am getting the following message:
Â
TITLE: New Publication Wizard------------------------------
SQL Server could not connect to the Distributor using the specified password.
[URL]
------------------------------ADDITIONAL INFORMATION:
Connection to server [SANMENON] failed.OLE DB provider "SQLNCLI" for linked server "D956CF83-AE2E-4FC5-83DD-BE90D84A3950" returned message "Login timeout expired".OLE DB provider "SQLNCLI" for linked server "D956CF83-AE2E-4FC5-83DD-BE90D84A3950" returned message "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.". (Microsoft SQL Server, Error: 21670)
[URL]
------------------------------BUTTONS:
OK------------------------------
Hi. I'm (very) new to SQL Server. I have run into what seems to be a very common problem, judging by the number of Google hits, but it's not actually in the FAQs here, as far as I can see.
Situation
I installed SQL Server Express with Advanced Services 2005 on my Windows XP Pro laptop, using (with one exception) the default install. The exception was to put the data files on a separate partition (D: ) where I have more free space.
SQL Server Management Studio Express connects happily, and I set up a single data import table.
Issue: bcp Fails to connect to default local instance
I initially tried bcp in output mode, prior to working in earnest on importing my data. However the command line-
bcp MyDatabaseName.dbo.UserProfile out UserProfile.txt -T -c
Fails with the error-
Error = [Microsoft][SQL Native Client]Named Pipes Provider: Could not open a connection to SQL Server [2].
As I understand it, the local instance of SSE is the default, and should use a local (shared memory?) connection. This seems to work for Management Studion Express, but not bcp.
While investigating this problem, I tried enabling remote connections (all types) through the Surface Area Configuration wizard, and found that remote connections using either of:
bcp eSpacePh1.dbo.UserProfile out UserProfile.txt -T -c -S localhostsqlexpress
bcp eSpacePh1.dbo.UserProfile out UserProfile.txt -T -c -S mycomputernamesqlexpress
both work ok.
Extra Info
When starting Management Studio Express, it says something like "Configuring environment for the first time". However it says this every time it is started, not just the first run after installation, does this indicate some configuration data is not being successfully stored?
I have found threads that look similar to my issue-
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=836670&SiteID=1
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=3351349&SiteID=1
However these do not relate directly to bcp, and to be honest my knowledge of SSE is slender enough at this stage that i'm unsure if there are really relevant.
Any hints on how to proceed much appreciated.
Regards: Colin E.
I have no issues connecting OLE DB manager with variables (basically i am passing source and destination) but i have issues to connect SMO Connection Manager
I tried to pass the variable into SqlServerName on SMO connectin properties..no luck... tried on control flow item (Transfer SQL server Objects Task) with sourceconnection and Soruce db .. no luck.
I am trying to transfer objects from one server to another server but I'll pass source and destination server names dynamically thru variables..
Any help would be much appreciated.
Thanks
How do you setup a conntection in ssis to connect to an access mdb? I have used DTS to upload access tables to sql and want to do the same in the new ssis services. I migrated the DTS package but the connection in created for the access mdb does not work in ssis and is shown to be be illegal. The migration did not post any errors when it migrated the package.
View 8 Replies View RelatedI am not able to connect to SQL Database server using windows authentication when I am connected through VPN connection.However I am able to connect to same server using SQL server authentication and also able to do RDP to DB server machine.
I found a resolution in one of the forum suggesting to change UserRasCredentials to 0 value in *.pdk file.Since VPN connection which I am using generates instant proxy this resolution doesn't work.
Also application which I am using does windows authentication connection it is required for me to impersonate windows authetication when connected using VPN.
All,
I was wondering if anyone could tell me why I could not connect to my server with the DAC when the server CPU utilization for all CPU's was greater than 90%.
BACKGROUND: I have successfully established DAC connections to this server in other periods when the CPU utilization was not pinned so high. I have done so by RDP'ing into the server, opening SSMS and cancelling the request to connect Object Explorer. Finally, I start a new query adding the "Admin" prefix to my server.
As I mentioned, when the server has CPU resource available, this works fine. This indicates that all the groundwork to setting up and using the DAC is laid correctly (i.e. DAC is enabled, I am connected locally, I am logged in with a user role with proper permissions, etc.).
This leads to my question. Why can I not connect to SQL Server 2005 Standard Edition using the DAC when all the (8-way) CPU utilization is at 90% or higher?
I need to make this connection to analyze why the server is so busy.
Any help will be greatly appreciated!!
Thanks,
Tom