Hello,
I am looking to modify this Case Statement. Where it says ELSE '' I need it to display the actual contents of the cell. 1 = Yes , 0 = No, (any other integer) = actual value.
Right now if the value is anything other than 1 or 0, it will leave the cell blank.
CASE dbo.Training.TrainingStatus WHEN 1 THEN 'Yes' WHEN 0 THEN 'No' ELSE '' END AS TrainingStatus
Thank You.
Hi,
In my database i have a column Called EntryDates which has 'Jan1' etc.. stored in it. and i am getting an Xml object and in the object i am getting @EntryDAtesMatch and @EntryDatesPS and they have different months stored in it.
So i want to insert into Entrydates or set the Entrydates as to whats been passed in following scenarios
If @Entrydates is Not Null then i want @EntryDates to be set as @EntryDates.
Suppose @EntryDates is NULL But @EntryDatesMatch OR @entryDAtesPS are not null then i want @EntryDates to be = @EntryDatesMatch..
Suppose is @EntryDates @EntryDatesMatch and null i want @EntryDates to be set as @EntryDatesPS...
This is what ihave tried doing.. but doesnt work as the way i want it..
SET @EntryDates =
CASE --When @EntryDatesMatch = NULL Then @EntryDates
When @EntryDates = NULL and @EntryDatesMatch = NULL Then @EntryDatesPS
When @EntryDates = NULL and @EntryDatesPS = NULL then @EntryDatesMatch
End
Any help will be appreciated..
Regards,
Karen
Hi,
here is what i am trying to do, when @call=2, then use table1.call
else use table2.call
and get syntax error no matter what I try,
case @services=2 then table1.call else table2.call end
I want to Add in a Case Statement to my Stored Procedure to Identify 5 classifications:
A: Birth to 6 yrs old
B: Female 7 yrs to 18 yrs
C: Male 7 yrs to 18 yrs
D: Female over 18 yrs old
E: Male over 18 yrs old
So Im looking for something like this:
CASE
WHEN [Patient Age] >= 6 THEN 'A'
WHEN [Patient Age] between .....
Any help is appreciated!
Declare @ApptDate datetime
Select @ApptDate = a.ApptStart
FROM Appointments a
WHERE a.AppointmentsId = @AppointmentsId
SELECT '290.PatientName'=IsNull(pp.First,'') + ' ' + isnull(pp.Middle,'') + ' ' + isnull(pp.Last,'')+ ' ' + isnull(pp.Suffix,''),
'291.PatLast'=IsNull(pp.Last,''),
'292.PatFirst'=IsNull(pp.First,''),
'293.PatMiddle'=IsNull(pp.Middle,''),
'294.PatientAddr1'=IsNull(pp.Address1,''),
'295.PatientAddr2'=IsNull(pp.Address2,''),
'296.PatientCity'=IsNull(pp.City,''),
'297.PatientState'=IsNull(pp.State,''),
'298.PatientZip'=IsNull(pp.Zip,''),
'299.PatientCountry' = ISNULL(pp.Country,''),
'300.PatientBirthdate' = pp.Birthdate,
'301.PatientSex'=IsNull(pp.Sex,''),
'302.PatientPhone1'=IsNull(pp.Phone1,''),
'303.PatientSSN'=IsNull(pp.SSN,''),
'304.PatOccupation'=IsNull(pp.EmpOccup,''),
'305.PatSchool'=IsNull(pp.MedicalRecordNumber,''),
'306.PatBudget'=IsNull(g.Budget,0),
'307.PatientSameAsGuarantor'=IsNull(pp.PatientSameAsGuarantor,0),
'308.PatSuffix'=IsNull(pp.Suffix,''),
'400.PatientAge' = CASE WHEN datediff(day, pp.birthdate, @ApptDate) <= 6 THEN cast(datediff(day, pp.birthdate, @ApptDate) as varchar(10)) + ' dys'
WHEN datediff(day, pp.birthdate, @ApptDate) <= 112 THEN cast(floor(cast(datediff(day, pp.birthdate, @ApptDate) as decimal) / 7) as varchar(10)) + ' wks'
WHEN floor(cast(datediff(day, pp.birthdate, @ApptDate) as decimal) / 365.25) < 2 and day(pp.birthdate) <= day(@ApptDate) THEN cast(datediff(month,pp.birthdate, @ApptDate) as varchar(10)) + ' mos'
WHEN floor(cast(datediff(day, pp.birthdate, @ApptDate) as decimal) / 365.25) < 2 and day(pp.birthdate) > day(@ApptDate) THEN cast(datediff(month,pp.birthdate, @ApptDate) - 1 as varchar(10)) + ' mos'
WHEN floor(cast(datediff(day, pp.birthdate, @ApptDate) as decimal) / 365.25) >= 2 THEN cast(floor(cast(datediff(day, pp.birthdate, @ApptDate) as decimal) / 365.25) as varchar(10)) + ' yrs'
ELSE '' END
FROM PatientProfile pp
LEFT JOIN Guarantor g ON pp.GuarantorId = g.GuarantorId
WHERE pp.PatientProfileID = @PatientProfileId
In my Database, I do not have a [Last Visit Date]. I have had to pull it by doing the following:
(select top 1 visit from patientvisit pv
where visit >= ISNULL(NULL,'1/1/1900') and visit < dateadd(d, 1,ISNULL(NULL,'1/1/3000')) AND
pp.patientprofileid = pv.PatientProfileID and datediff(day, getDate(), visit) < 0 order by visit desc) as [Last Visit Date]
My client would like to have a listing of patients with a visit within the past 2 years and without a visit in the past 2 years. What I would like to do is have a case statement that evaluates like:
Case
When dateadd(y,[LastVisitDate],getdate())<2 then 'Less Than 2'
When dateadd(y,[LastVisitDate],getdate())>=2 then '2 or more'
else 'No detected visit'
END
So basically, either your in 2 yrs or your not.
My Current Query:
/* Patient List*/
SET NOCOUNT ON
DECLARE @Zip varchar(40)
SELECT @Zip = LTRIM(RTRIM('NULL')) + '%';
WITH cteMedlitsPatientStatus AS
(
SELECT * FROM Medlists WHERE TableName = 'PatientProfileStatus'
)
SELECT
PatientID, RespSameAsPatient=isnull(PatientSameAsGuarantor,0),
PatientName=CASE
WHEN RTRIM(pp.Last + ' ' + ISNULL(pp.Suffix,'')) <> '' THEN
RTRIM(RTRIM(pp.Last + ' ' + ISNULL(pp.Suffix,'')) + ', ' + ISNULL(pp.First,'') + ' ' + ISNULL(pp.Middle,''))
ELSE RTRIM(ISNULL(pp.First,'') + ' ' + ISNULL(pp.Middle,''))
END,
PatientAddr1=pp.Address1, PatientAddr2=pp.Address2,
PatientCity=pp.City, PatientState=pp.State, PatientZip=pp.Zip,
PatientRespName=CASE
WHEN RTRIM(pr.Last + ' ' + ISNULL(pr.Suffix,'')) <> '' THEN
RTRIM(RTRIM(pr.Last + ' ' + ISNULL(pr.Suffix,'')) + ', ' + ISNULL(pr.First,'') + ' ' + ISNULL(pr.Middle,''))
ELSE RTRIM(ISNULL(pr.First,'') + ' ' + ISNULL(pr.Middle,''))
END,
PatientRespAddr1=pr.Address1, PatientRespAddr2=pr.Address2, PatientRespCity=pr.City,
PatientRespState=pr.State, PatientRespZip=pr.Zip, FinancialClass=isnull(ml.Description,'none'),
Doctor=df.ListName,Facility=df1.OrgName,Balance=isnull(ppa.PatBalance,0)+isnull(ppa.InsBalance,0), pp.DeathDate,
Status = ml1.Description,
pp.BirthDate,
(select top 1 visit
from patientvisit pv
where visit >= ISNULL(NULL,'1/1/1900') and
visit < dateadd(d, 1,ISNULL(NULL,'1/1/3000')) AND
pp.patientprofileid = pv.PatientProfileID
and datediff(day, getDate(), visit) < 0 order by visit desc) as [Last Visit Date]
FROM PatientProfile pp
LEFT JOIN PatientProfileAgg ppa ON pp.PatientProfileID = ppa.PatientProfileID
LEFT JOIN Guarantor pr ON pp.GuarantorID = pr.GuarantorID
LEFT JOIN MedLists ml ON pp.FinancialClassMID = ml.MedListsID
LEFT JOIN DoctorFacility df ON pp.DoctorID = df.DoctorFacilityID
LEFT JOIN DoctorFacility df1 ON pp.FacilityId = df1.DoctorFacilityID
LEFT JOIN cteMedlitsPatientStatus ml1 ON pp.PatientStatusMId = ml1.MedlistsId
WHERE etc ......
Hello experts!
I have a case statement that provides filtering of hours during certain days of the week. An example is the data I want to show on Sunday is different from the rest of the week. I am using....
Code Snippet
WHERE ((CASE WHEN Datepart(dw, TestDateTime) = 1 AND datepart(hh, TestDateTime) BETWEEN 8 AND 22 THEN 1 WHEN Datepart(dw, TestDateTime)
>= 2 AND datepart(hh, TestDateTime) BETWEEN 6 AND 23 OR
datepart(hh, TestDateTime) BETWEEN 0 AND 2 THEN 1 ELSE 0 END) >= @ShowCore)
Esentially it gives a parameter (@showcore) to where it shows the filtered hours when 1 is selected, and all hours if 0 is selected.
Basically, Sunday I want to show transaction from between 8am and 10pm, All other days would be 12am - 2am and 6am to 11:59:59 when selecting 1 as the parameter.
Any help is appreciated.
Using SSIS to import from Excel to SQL Server.
In Excel they are showing Sale as -ve quantity and purchase as +ve quantity.
The database has quantity always as +ve figure and a separate column "isPurchase" set to true or false depending on whether purchase or sale.
So I need Derived Column to return a bolean (or int) depending whether quantity is positive or negative. I tried each of the following in the Expression but all of them were invalid expressions.
CASE WHEN [TotalQuantity] > 0 THEN 0 ELSE 1 END
If [TotalQuantity] > 0 THEN 1 ELSE 0 END
IIF ([TotalQuantity] > 0, 1,0)
Can anyone help me with correct syntax, or correct Data Flow Transformation if Derived column is wrong.
Thanks
Richard
I'm looking for SQL code to do the following.TableAGrpID,IndID,Locked50001,10001,050001,10002,050002,10003,050002,10004,150002,10005,050003,10006,050003,10007,050003,10008,050004,10009,050004,10010,050004,10011,150004,10012,1I would like to return GrpID's where All IndID have Locked = 0RecordsetGrpID5000150003Email me at the following:Join Bytes!
View 2 Replies View RelatedI have a view where I'm using a series of conditions within a CASE statement to determine a numeric shipment status for a given row. In addition, I need to bring back the corresponding status text for that shipment status code.
Previously, I had been duplicating the CASE logic for both columns, like so:
Code Block...beginning of SQL view...
shipment_status =
CASE
[logic for condition 1]
THEN 1
WHEN [logic for condition 2]
THEN 2
WHEN [logic for condition 3]
THEN 3
WHEN [logic for condition 4]
THEN 4
ELSE 0
END,
shipment_status_text =
CASE
[logic for condition 1]
THEN 'Condition 1 text'
WHEN [logic for condition 2]
THEN 'Condition 2 text'
WHEN [logic for condition 3]
THEN 'Condition 3 text'
WHEN [logic for condition 4]
THEN 'Condition 4 text'
ELSE 'Error'
END,
...remainder of SQL view...
This works, but the logic for each of the case conditions is rather long. I'd like to move away from this for easier code management, plus I imagine that this isn't the best performance-wise.
This is what I'd like to do:
Code Block
...beginning of SQL view...
shipment_status =
CASE
[logic for condition 1]
THEN 1
WHEN [logic for condition 2]
THEN 2
WHEN [logic for condition 3]
THEN 3
WHEN [logic for condition 4]
THEN 4
ELSE 0
END,
shipment_status_text =
CASE shipment_status
WHEN 1 THEN 'Condition 1 text'
WHEN 2 THEN 'Condition 2 text'
WHEN 3 THEN 'Condition 3 text'
WHEN 4 THEN 'Condition 4 text'
ELSE 'Error'
END,
...remainder of SQL view...
This runs as a query, however all of the rows now should "Error" as the value for shipment_status_text.
Is what I'm trying to do even currently possible in T-SQL? If not, do you have any other suggestions for how I can accomplish the same result?
Thanks,
Jason
Hi I'm new to SQL and I'm stuggling with a simple query in MS-server 2005 and wondered if anyone can help me.
I'm trying to devide the ansewrs of two seperate queries, but both the queries use the same coloumn in the where clause to get the answer. Please can some one help!
eg.
select Sum(column1)
where column1 = 'x'
devided by
select Sum(column1)
where column1 = 'y'
I was looking for a way to "globally" set my FROM database value. Is this possible?, or does the "FROM" syntax always require the database name? I would like to just state my table names in the FROM statement
BEFORE Example:
select T1.id, FROM PT.ptuser.tblRequest T1, where etc....
Can the "PT.ptuser" be declared somehow 1 time so my SQL code could look like...
AFTER Example:
select T1.id, FROM tblRequest T1, where etc....
hope this makes sense.... I'm trying to run SQL via Microsoft Query
Hello all. I have an Access table with EmpName, JobTask, and Hours. Multiple lines can contain the same Employee with the same JobTask. What I need to do is to list the Employee, JobTasks (grouped), and summed hours for each JobTask.
DB Ex:
John Doe Welding 8
John Doe Cleaning 4
Bubba Smith Fork Lift 3
John Doe Welding 7
Steve Johnson Welding 5
Bubba Smith Fork Lift 6
Page output:
John Doe
Welding 15 hrs.
Cleaning 4 hrs.
Bubba Smith
Fork Lift 9 hrs.
Steve Johnson
Welding 5 hrs.
This is how I figured it should be, but it's not working for me:
SELECT EmpName, SUM (Hours), JobTask
FROM tblEmpTime
Group By JobTask
Any suggestions would be greatly appreciated.
Thanks,
Parallon
Hey all,
Can anyone tell me why this stored procedure doesn't work?
ALTER PROCEDURE [dbo].[RemoveLocation]
@Id int,
@Name varchar
AS
DELETE FROM Classifieds_Terminals
WHERE [Id] = @Id and [Name] = @Name
I try exeuting it like this:
USE [CLASSIFIEDSDB2.MDF]
GO
DECLARE @return_value int
EXEC @return_value = [dbo].[RemoveLocation]
@Id = 18,
@Name = N'Terminal A'
SELECT 'Return Value' = @return_value
GO
It returns 0 and nothing happens....???
Here is the table:
id | Name
18 Terminal A18 Terminal B18 Terminal C
I have 2 SQL 2000 servers. One has been added as a linked server.
They both have a db called claims. If I am on server 1 and want to write a sql statement I am stuck with the write syntax
I tried select patient.* from testedi..claims.
The server is linked using the sa user. I know this is simple but in a hurry and stuck. THe servers are on same domain.
Thanks
i was tasked to created an UPDATE statement for 6 tables , i would like to update 4 columns within the 6 tables , they all contains the same column names. the table gets its information from the source table, however the data that is transferd to the 6 tables are sometimes incorrect , i need to write a UPDATE statement that will automatically correct the data. the Update statement should also contact a where clause
the columns are [No] , [Salesperson Code], [Country Code] and [Country Name]
i was thinking of doing
Update [tablename]
SET [No] =
CASE
WHEN [No] ='AF01' THEN 'Country Code' = 'ZA7' AND 'Country Name' = 'South Africa'
ELSE 'Null'
END
What is the best way to script this
Hello friends,
I want to use select statement in a CASE inside procedure.
can I do it? of yes then how can i do it ?
following part of the procedure clears my requirement.
SELECT E.EmployeeID,
CASE E.EmployeeType
WHEN 1 THEN
select * from Tbl1
WHEN 2 THEN
select * from Tbl2
WHEN 3 THEN
select * from Tbl3
END
FROM EMPLOYEE E
can any one help me in this?
please give me a sample query.
Thanks and Regards,
Kiran Suthar
I am attempting to run update statements within a SELECT CASE statement.
Select case x.field
WHEN 'XXX' THEN
UPDATE TABLE1
SET TABLE1.FIELD2 = 1
ELSE
UPDATE TABLE2
SET TABLE2.FIELD1 = 2
END
FROM OuterTable x
I get incorrect syntax near the keyword 'update'.
Hi all,
I am not sure this is the right place to post my question, if not please let me know where I should post it. I have been struggling with it for 2 hours:(.
I have a query that works fine in the sql query analyzer. I need to put it in the asp.net page using vb.net. When I cancatenate all the pieces together with the 'case when', it fails. Is it because of the single quotes or what?
Can someone please take a look at the simple query?
New System.Data.SqlClient.SqlDataAdapter("SELECT T1.C1 as D#," & "(case When T1.Production_Date is null then " & "' " & "'" & " else T1.Production_Date end)" & ", T1.Production_Plant as Location, convert(int,T1.Inv_Level) as Inv_Level, T1.Container_Size, T1.Level_ID, T1.Unit_of_Measure, T1.Performance_Comments, T1.Product_Number, T1.Unit_ID,Products.P_Name FROM T1 INNER JOIN Products ON T1.Product_Number = Products.Product_Number and T1.Unit_ID = Products.Unit_ID WHERE ((T1.Product_Number)=" & "'" & strPID & "'" & ") AND (( T1.U_ID=" & "'" & strUID & "'" & "))", con)
Your help is highly appreciated,
I'm trying to work my way through the steps of using a User Id and Password in a connection string.
I'm working with SQL 2005 Express, VS2005, in the development server. Got an error I can't get around...tried it several diffent ways on a slightly more complicated test site...no joy...so went to the MSDN tutorial...made the most "vanilla" test I could think of, and still can't figure it out.
I thought it would be simple enough that I could post the whole thing (below)
The test works fine with Integrated Security = True in the connection string. When I remove that phrase, I get the error:
{"CREATE DATABASE permission denied in database 'master'.
An attempt to attach an auto-named database for file E:MyPathApp_DataVSST_DB.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share."}
This occurs on the cn.Open statement below.
It gets past the login, so I know that the SQL User and password match up correctly.
==========================
<connectionStrings>
<add name="VSST_CN"
connectionString="Data Source=MyServerSQLEXPRESS;AttachDbFilename=E:MyPathApp_DataVSST_DB.mdf;User Id = VSST; Password=vsst123"
providerName="System.Data.SqlClient"/>
</connectionStrings>
=========================
Page Code Behind (no controls on page)
------------
Imports System.Data
Imports System.Data.SqlClient
Partial Class _Default
Inherits System.Web.UI.Page
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Dim cn As SqlConnection = New SqlConnection(ConfigurationManager.ConnectionStrings("VSST_CN").ToString())
Dim cmd As SqlCommand = New SqlCommand("SELECT COUNT(*) FROM VSST_Table", cn)
cn.Open()
Dim rdr As SqlDataReader = cmd.ExecuteReader(CommandBehavior.CloseConnection)
rdr.Read()
Response.Write(rdr(0).ToString())
End Sub
End Class
=================
The DB
Table VSST_Table,
ID is int, primary key, identity
Field1, Field2, Field3, Field4, Field5 are varchar(50)
I added one record ("A", "B", "C", "D", "E") to the table through VS2005 Server Explorer
This shows up in Count = 1 from running the page when Integrated Security = True
=================
In SSMSE: (this is ALL I did, tried to use the minimum so not to confuse...)
I added the SQL Authentication Server level user "VSST" with the password "vsst123" (and the login works, as noted above)
I attach the .mdf
I add VSST to the Database Users, and give it db_owner
I add VSST to the Table with all permissions checked.
=====================================
I can't figure this out. This is a very vanilla test and I'm stumped. I'm about to give up on SQL Authentication entirely (at least for now), and just try to filter my inputs for SQL Injections...that's the only reason I have (at this stage in my biz plan) for needing SQL Authentication. On the other hand, I really don't like being this stumped on something that is so widely promoted as a common practice.
Any help on this would be greatly appreciated.
Thanks!
Hi All,
I've looked through the forum hoping I'm not the only one with this issue but alas, I have found nothing so I'm hoping someone out there will give me some assistance.
My problem is the case statement in my Insert Statement. My overall goal is to insert records from one table to another. But I need to be able to assign a specific value to the incoming data and thought the case statement would be the best way of doing it. I must be doing something wrong but I can't seem to see it.
Here is my code:
Insert into myTblA
(TblA_ID,
mycasefield =
case
when mycasefield = 1 then 99861
when mycasefield = 2 then 99862
when mycasefield = 3 then 99863
when mycasefield = 4 then 99864
when mycasefield = 5 then 99865
when mycasefield = 6 then 99866
when mycasefield = 7 then 99867
when mycasefield = 8 then 99868
when mycasefield = 9 then 99855
when mycasefield = 10 then 99839
end,
alt_min,
alt_max,
longitude,
latitude
(
Select MTB.LocationID
MTB.model_ID
MTB.elevation, --alt min
null, --alt max
MTB.longitude, --longitude
MTB.latitude --latitude
from MyTblB MTB
);
The error I'm getting is:
Incorrect syntax near '='.
I have tried various versions of the case statement based on examples I have found but nothing works.
I would greatly appreciate any assistance with this one. I've been smacking my head against the wall for awhile trying to find a solution.
i want to display records as per if else condition in ms sql query,for this i have used tables ,queries as follows
as per data in MS Sql
my tables are as follows
1)material
fields are -- material_id,project_type,project_id,qty, --
2)AB_Corporate_project
fields are-- ab_crp_id,custname,contract_no,field_no
3)Other_project
fields are -- other_proj_id,other_custname,po
for ex :
vales in table's are
AB_Corporate_project
=====================
ab_crp_id custname contract_no field_no
1 abc 234 66
2 xyz 33 20
Other_project
============
other_proj_id other_custname po
1 xxcx 111
2 dsd 222
material
=========
material_id project_type project_id qty
1 AB Corporate 1 3
2 Other Project 2 7
i have taken AB Corporate for AB_Corporate_project ,Other Project for Other_project
sample query i write :--
select m.material_id ,m.project_type,m.project_id,m.qty,ab.ab_crp_id,
ab.custname ,op.other_proj_id,op.other_custname,op. po
case if m.project_type = 'AB Corporate' then
select * from AB_Corporate_project where ab.ab_crp_id = m.project_id
else if m.project_type = 'Other Project' then
select * from Other_project where op.other_proj_id=m.project_id
end
from material m,AB_Corporate_project ab,Other_project op
but this query not work,also it gives errors
i want sql query to show data as follows
material_id project_type project_id custname other_custname qty
1 AB Corporate 1 abc -- 3
2 Other Project 2 -- dsd 7
so plz help me how can i write sql query for to show the output
plz send a sql query
Hi.. I need help with this SQL statement. I don't know if this can be done with a single SQL statement or not!
I have two tables:
tblProducts: ProductID, ProductName
tblOrders: OrderID, ProductID
I need to "SELECT tblProducts.ProductName FROM tblProducts WHERE (tblProducts.ProductID is not in tblOrders Table)".
Thanks in advance...
Hi,
Table A
member_no - character 5course1 - character 1course2 - character 1
Table Bcourse_no - character 1course_name - character 20I'd like a resultant view that contains A.member_no, A.course1, B.coursename as COURSE1NAME, A.course2, B.course_name as COURSE2NAMEI know how to make the join and pick up the name for course1 but I DON'T know how to pick up both names of course 1 and course 2 at the same time.I'm thinking I have to make a join on one column and then join the result of that a second time to pick up the other column's value?
Thanks in advance for any assistance,Stewart
Hi,
I am trying to insert the follows rows to my production database... and this the sample data
Row Plan PART_ID FUND_ID TOT_ACT1 TOT_ACT2
Number Num
1170925 129602759 19765P471 BB4928.47 CT0.00 DV26.30 GL153.75 TF0.00 WD0.00 OT0.00 EB5108.52 205.0110 24.04 206.0720 24.79
2170925 129602759 35472P406 BB2663.64 CT325.00 DV87.46 GL26.42 TF530.92 WD0.00 OT0.00 EB3633.44 189.0450 14.09 254.6210 14.27
3170925 129602759 LOAN BB1506.88 CT0.00 DV25.48 GL0.00 TF-530.92 WD0.00 OT0.00 EB1001.44 1506.88 1.00 1001.44 1.00
4170925 148603737 19765L587 BB25.14 CT0.00 DV0.46 GL-0.45 TF0.00 WD0.00 OT0.00 EB25.15 5.3830 4.67 5.4790 4.59
5170925 148603737 19765P471 BB7.48 CT0.00 DV0.05 GL0.23 TF0.00 WD0.00 OT0.00 EB7.76 0.3110 24.04 0.3130 24.79
6170925 148603737 35472P208 BB12.53 CT0.00 DV0.28 GL0.09 TF0.00 WD0.00 OT0.00 EB12.90 0.9360 13.39 0.9570 13.48
7170925 148603737 35472P604 BB7.48 CT0.00 DV0.24 GL0.15 TF0.00 WD0.00 OT0.00 EB7.87 0.4720 15.85 0.4870 16.16
8170925 148603737 315805549 BB29.72 CT0.00 DV0.00 GL2.15 TF0.00 WD0.00 OT0.00 EB31.87 1.5320 19.40 1.5320 20.80
9170925 148603737 197199102 BB5.00 CT0.00 DV0.06 GL0.27 TF0.00 WD0.00 OT0.00 EB5.33 0.1650 30.32 0.1670 31.94
So the number of rows in this table is 1007 right now my insert query inserts all the data but excepts LOAN and i want Loans inserted in a seperate column in my production dataabse but thats not happening so can some one pls take a look at this query and see whats wrong... My query is as follows1 INSERT INTO Statements..ParticipantPlanFundBalances1
2 (
3 PlanId,
4 ParticipantId,
5 PeriodId,
6 FundId,
7 Loans,
8 --PortfolioId,
9 Act1,
10 TotAct1,
11 Act2,
12 TotAct2,
13 Act3,
14 TotAct3,
15 Act4,
16 TotAct4,
17 Act5,
18 TotAct5,
19 Act6,
20 TotAct6,
21 Act7,
22 TotAct7,
23 Act8,
24 TotAct8,
25 Act9,
26 TotAct9,
27 Act10,
28 TotAct10,
29 Act11,
30 TotAct11,
31 Act12,
32 TotAct12,
33 Act13,
34 TotAct13,
35 Act14,
36 TotAct14,
37 Act15,
38 TotAct15,
39 Act16,
40 TotAct16,
41 Act17,
42 TotAct17,
43 Act18,
44 TotAct18,
45 Act19,
46 TotAct19,
47 Act20,
48 TotAct20,
49 OpeningUnits,
50 OPricePerUnit,
51 ClosingUnits,
52 CPricePerUnit,
53 AllocationPercent
54 )
55 SELECT
56 cp.PlanId,
57 p.ParticipantId,
58 @PeriodId,
59 Case When a.FUND_ID <> 'LOAN' Then f.FundId ELSE 0 END,
60 CASE When a.FUND_ID = 'LOAN' Then 'LOAN' END as Loanfunds,
61 --planinfo.PortfolioId,
62 Case WHEN a.ACT_ID1 = 'BB' Then 1 END,
63 a.TOT_ACT1,
64 Case WHEN a.ACT_ID2 = 'CT'Then 2 END,
65 a.TOT_ACT2,
66 CASE When a.ACT_ID3 = 'DV' then 3 END,
67 a.TOT_ACT3,
68 CASE When a.ACT_ID4 = 'GL' Then 4 End,
69 a.TOT_ACT4,
70 CAse When a.ACT_ID5 = 'TF' THEN 5 END,
71 a.TOT_ACT5,
72 CASE When a.ACT_ID6 = 'WD' THEN 6 END,
73 a.TOT_ACT6,
74 CASE WHEN a.ACT_ID7 = 'OT' THEN 7 END,
75 a.TOT_ACT7,
76 CASE When a.ACT_ID8 = 'EB' THEN 8 END,
77 a.TOT_ACT8,
78 a.ACT_ID9,
79 a.TOT_ACT9,
80 a.ACT_ID10,
81 a.TOT_ACT10,
82 a.ACT_ID11,
83 a.TOT_ACT11,
84 a.ACT_ID12,
85 a.TOT_ACT12,
86 a.ACT_ID13,
87 a.TOT_ACT13,
88 a.ACT_ID14,
89 a.TOT_ACT14,
90 a.ACT_ID15,
91 a.TOT_ACT15,
92 a.ACT_ID16,
93 a.TOT_ACT16,
94 a.ACT_ID17,
95 a.TOT_ACT17,
96 a.ACT_ID18,
97 a.TOT_ACT18,
98 a.ACT_ID19,
99 a.TOT_ACT19,
100 a.ACT_ID20,
101 a.TOT_ACT20,
102 a.UNIT_OP,
103 a.PRICE_OP,
104 a.UNIT_CL,
105 a.PRICE_CL,
106 IsNull(i.ALLOC_PER1,'0.00')
107 FROM
108 ASDBF a
109
110 --Derive the unique Plan Id
111 INNER JOIN Statements..ClientPlan cp
112 ONa.PLAN_NUM = cp.ClientPlanId
113 AND
114 cp.ClientId = @ClientId
115 --Derive the unique ParticipantId from the Participant table
116 INNER JOIN Statements..Participant p
117 ONa.PART_ID = p.PartId
118 -- Derive the unique fund id from the Fund Table
119 INNER JOIN Statements..Fund f
120 ONa.FUND_ID = f.Cusip
121 OR
122 a.FUND_ID = f.Ticker
123 OR
124 a.FUND_ID = f.ClientFundId
125 Left Outer JOIN INVSRC i
126 ONa.FUND_ID = i.INV_ID
127 AND
128 a.PLAN_NUM = i.Plan_Number
129 AND
130 a.PART_ID = i.PART_ID
131 --Get the unique portfolio name ffor the PArticipant Funds..
132 WHERE
133 --Ignore rows that failed the scrub.
134 a.Import = 1
135 AND
136 --Import only those that are not already in the ParticipantPlanFundBalances table
137 NOT EXISTS (
138 SELECT *
139 FROM
140 Statements..ParticipantPlanFundBalances1 pfb
141 WHERE
142 pfb.PlanId = cp.PlanId
143 AND
144 pfb.ParticipantId = p.ParticipantId
145 AND
146 pfb.PeriodId = @PeriodId
147 AND
148 pfb.FundId = f.FundId
149 )
any help is appreciated.
Regards
Karen
Hi,
I am trying to do a simple select statement which returns data from the table. The criteria is only if the count of the records is more than 10. Say, if a vendor called test exists 10 times in the table, I would like to display that vendor only, if less than 10, then that vendor won't be displayed at all.
Here is what I have started.
Select vendor_id, vendor_name, Invoice_Date, Invoice_Number from Vendors where Invoice_Date Between '01/01/2007' And '03/03/2008' Group By vendor_id, vendor_name, Invoice_Date, Invoice_Number Having Count(Invoice_Number) > 10
This doesn't seem to work. What am I doing wrong here?
I have worked on developing a project that I am pleased to say is comming along nicely considering I have only been doing programming for a few weeks but I am now stuck and may be going down the wrong path.
I have two tables one that is used for logging via username and password, it also holds a third coloumn realting to the suers account that they do not enter. Once they have logged in I am recalling the users identity and running a query to establish what account the user belongs to. Later on in the script I am trying to run a query on a table called orders that list all orders belonging to that account that was established in the earlier query labelled as 'accountrequesting'.
The script I have below returns all orders for all accounts even though I have tried a wide variety of endings on the Sql search on the orders table.
The code may look a little untidy and to advanced programmers may look rough but I am still learning.....please can anyone help.
sub Page_Load(sender as Object, e as EventArgs)
'collecting the user identity
Dim user as string
user=request("User.Identity.Name")
'running a query to establish what account they have access to all from users table
Dim accountrequesting as string
accountrequesting = "select account_id from users where username = " & user & "'"
'opening the data source and connection
Dim ConnectionString As String = "Data Source=xxxx;Database=xxxx;User ID=xxxxxxx;Password=xxxxxxx"
Dim Myconn as New SQLConnection(connectionstring)
'this is the line I am stuck on, the account id in this orders table needs to match against the value gained in accountrequesting above tried a lot of different endings
Dim MySQL as string ="select prodshipped, account_id from orders"
'produces output
Dim ds as Dataset=New Dataset()
Dim Cmd as new SQLDataAdapter (MySQL, Myconn)
Cmd.Fill (ds,"orders")
MyDataGrid.datasource=ds.tables("orders").defaultview
MyDataGrid.Databind()
End Sub
I am having a heck of a time getting an UPDATE statement to work. Can anyone point out what it is I'm doing wrong? Here is my statement......
strSQL = "UPDATE tbl-Pnumber_list SET Project_Title = 'success' WHERE ID = @IDParam"
Thanks!
Eugh
I have a stored procedure that populates a table. I want to query the table using column names as variables, however the data is in decimal format so I am getting errors converting varchar to numeric. My table consists of columns labeled D1, D2, etc. for every possible day of any month, DOW1, DOW2, etc. for every day of the week. I also have values labeled midDpct and midDOWpct. My query is as follows:
select *
from Table
where D10 > midDaypct * 2 and DOW6 > 0
union
select *
from Table
where DOW6 >midDOWpct * 2 and D10 > 0
We are targeting a specific day of the month and a specific day of week, day 10 and day of week 6 in this example. I want to make these variables so we can easily change out the target day and dow.
I have a table consisting of two fields, OStype and OSversion, withentries like:OStypeOSversionsolaris 2.5solaris 2.6redhat 6.2redhat 6.2solaris 8redhat AS4solaris 10solaris 10redhat AS2.1redhat AS3redhat AS4I want to create a select statement that returns for each OS type, thetotal number of entries and for each version the total number ofentries.In the example the result would be:OStype OStype Count OSversion OSversion Countsolaris 52.5 12.6 18 110 2redhat 66.2 2AS2.1 1AS3 1AS4 2Thanks in advance for your help.Ian
View 3 Replies View RelatedI have a table with two columns. empnum and empname. there are some data with same empnum but different empname. I just want to get the first empname for the same empnum. Is there a way to write a sql stetment to do this?
Thanks
Below is my table structure:
CREATE TABLE [reports].[MDC_DRG](
[InsDrgMdc] [nvarchar](50) NULL,
[InsDrgMdcDesc] [nvarchar](50) NULL,
[MDC] [nvarchar](100) NULL,
[Drg] [nvarchar](50) NULL,
[DrgDesc] [nvarchar](255) NULL,
[AnyDx] [nvarchar](100) NULL,
[Cases] [decimal](18, 0) NULL,
[IntOOS] [int] NOT NULL,
[ChronicOther] [nvarchar](50) NULL
) ON [PRIMARY]
Here is a sample select from the AnyDx field:
AnyDx
,85225,85225,5304 ,5181 ,80501,E8190,3485,
,1983 ,1983 ,49121,1625 ,34550,79381,78079,30001,V1,
,2396 ,2396 ,78039,311,
,33390,33390,31401,49390,
,3410,3410,2768,3051,72293,V146,V4579,V1041,
,43491,43491,25000,4019 ,V1581,
,43491,43491,25000,4919 ,3569 ,4019 ,72252,78650,71,
,43491,43491,2768,30590,34290,4019,V146,7845,2724,2,
,43491,43491,34290,40290,25000,7843,7872,41401,4278,
,43491,43491,412 ,25000,41401,4019 ,2724 ,29680,V1,
I need to issue an update statement to the ChronicOther field. If the range below is in the AnyDx field, then I want the ChronicOther field to say "Chronic", if not then I want it to say "Other".
where AnyDx between '25000' and '25091'
or AnyDx between '41400' and '41406'
or AnyDx between '42800' and '42890'
or AnyDx between '40100' and '40291'
or AnyDx between '34200' and '34292'
or AnyDx between '14000' and '19910'
or AnyDx between '49600' and '49600'
or AnyDx between '27240' and '27240')
My problem is what is the best way to look for this range (below) in the AnyDx field without multiple like statements?
example:
Update reports.MDC_DRG
SET ChronicOther = CASE When AnyDx like ('%,25000,%') Then 'Chronic' Else 'Other'
etc., etc.....
I'm trying to get my feet wet with creating a Sql Server project within VS 2005 and I have the using statements below present but when I compile I get errors stating that SqlContext, SQLPipe, and SQLCommand do not exist in the current context. What am I missing? Under the references node I have 3 references present (System, System.Data, and System.XML). What am I missing?
TIA
using System;
using System.Data;
using System.Data.Sql;
using System.Data.SqlClient;
using System.Data.SqlTypes;
using Microsoft.SqlServer.Server;
Hi,
I am trying to insert the Source name and clientId to a table called clientSource...
The User will send in some Dbf File.... So in a particular file called PlanDbf.. I have the following fields
PlanNumber, Name, SRC1Name, SRC2Name, SRC3Name.... SRC20Name
170234 Constructions Employee Deferral Employer Discretionary Employer Matching....
And in another table called SourceDBF i have the following fields with data
PlanNumber PARTID SOURCE_NUM etc...
170234 123456789 1
170234 123456789 3
170234 451231334 1
So how do i match the Source_NUM with SRCnames when i insert it into the table..
INSERT INTO Statement..ClientSource(@ClientId, SourceName)SELECT s.SOURCE_NUM FROM SourceDBF ..
but i am stuck..
any help will be appreciated.
Regards
Karen