In a matrix report with column and row groupings, how to pass the parameters to the drill-through report? The column grouping could open up into multiple columns and the same to the row groupings. I have a navigation link to a drill-through report on a total field in the matrix report and the drill-through report is required three parameters, one from the parameter from the matrix report (this one I can map to easily), second parameter is one of the value from the column grouping field and the third parameter is one of the value from the row grouping field. How to select those values from the column/row grouping.
I have created a report with the report server project template.
the report is created from stoked procedure having defaut input parameters.
With visual studio, i publish my report on reportserver. whenever i access to my report on this url :
http://localhost/ReportServer/Pages/ReportViewer.aspx?%2fReport+Project4%2fReport4&rs:Command=Render. the created report is with the default parameters.
I would like to know if i can transmet parameters for the stocked procedure to build the report with the request i want.
I tried to put parameter directly in the url in this way
I am having hard time in sending parameters to the report server through reportviewer control from my application. Could anybody help me on this issue?. Is there any way to send the parameters and also what kind of configuration do i need on my report project so that it can accept parameters from my application.
I have a really cool Budget report which has two matrices on it. One is used/visible if the user selects four levels of grouping, and one is used if the user selects only three levels of grouping. The four choices for grouping are four fields, Par, FERC, Point, and Resource.
Since grouping is optional, I need a way to pass the parameter for a field that is not grouped on from the main report to the drillthrough report. For example if the user chooses to group on all fields but Point, I need to pass the report parameter that was used by the main report for Point to the drillthrough report as a report parameter.
So, I tried testing the three grouping levels values and if none were equal to "Point" then pass in the parameter by putting the following expression in the Parameter Value box for the Point parameter on the Navigation tab of the datacell of the main report that is the drillthrough link:
=iif( Parameters!GroupLevel1.Value <> "Point" and Parameters!GroupLevel2.Value<>"Point" and Parameters!GroupLevel3.Value<>"Point" , Join(Parameters!PNTPoint.Value,",") , Fields!Point.UniqueName )
But this is not working; the drillthrough report shows a blank dropdown for the Point parameter and I have to manually set it. Does anyone see an error in the syntax of the iif statement?
Any references, links, resources or good clean jokes would be greatly appreciated.
I have a project where I need to automatically pass 2 sets of parameters to a SSRS report and generate PDF files. I have set the defaults for the parameters based on one set of parameters and created a subscription to automatically generate PDF copy. However, I am not sure how to generate the report automatically using the other set of parameters. Also, I don't want to create two report files to accomplish this.
In the data tab of my report (Reporting Services for SQL Server 2000), I'd like to run a query that requires parameters be passed to it. Is there a way to pass the parameters of the report to that query?
hi, I am new to sql server reporting services. When i pass more than 30 parameters ,my report is showing parameters which is not a desired one even though i am making showparameterPrompts property to false.
can any one tell me how to pass more no of parameters to the Report.
MY DBA wrote a trigger, that upon hitting the delete button for a payment, the payment would be transferred to another table and the trigger would call a sp as well. since the trigger is calling the sp, I should only supply the parameters.
My report uses an OLAP query with a (multi-valued) parameter, the generated MDX query contains something like "...ON ROWS FROM ( SELECT ( STRTOSET(@Region, CONSTRAINED) ) ON COLUMNS FROM [cube]) ...".
The report works fine using the Report Manager frontend. Now I want to pass this parameter directly within the query string:
But I cannot get Reporting Services to accept the parameter via URL access (instead of complaining about a missing parameter value). I've already tried quoting/encoding the brackets, spaces, and the ampersand, putting the dimension in curly braces and/or quotes... No success.
Normal (url-encoded) query parameters work fine, I just can't pass OLAP parameters (dimensions like "[foo].[bar 123].&[baz]") this way. I think ReportServer doesn't like the way I'm trying to quote them...
Hi Gurus, I want to pass 0 value to all subreport parameters in the beginning when main report is run. This is because i dont want subreport query to run.
when user clicks on '+' in main report, i want to pass the parameter values so that the subreport will run with correct parameters for that particular main report row.
My purpose of doing this is to achieve speed with subreport
I have recently had a few reports that are built around the userid parameter start failing to pass the userid parameter. If I run the report and hard code the userid everything runs just fine, but I am not able to collect the userid when the user is logging into the report server. Any thoughts or suggestions?
We have a recurring project status report that uses a matrix (each matrix group is for an individual project). The name of the project renders fine and displays in the group, but when we try to pass this same value as a parameter to a subreport (a graph) which we also want to display in the matrix the subreport is only renderd for the last instance of the matrix group (i.e. 4 of 4 has it but 1-3 show a blank field in the matrix).
I assume this has something to do with using parameters within the matrix control, but didn't find any posts about that.
I should add another way we've tried to do this is with a list instead of a matrix and it also fails in the same way (doesn't render all of the subreports).
how do i pass the paramenters and storedprocedure to dataview from code-behind? the below code have sqldatasource control but i want to pass through code-behind everything...
<asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataSourceID="SqlDataSource1" EmptyDataText="There are no data records to display." DataKeyNames="NewsId"> <Columns> <asp:BoundField DataField="NewsId" HeaderText="NewsId" InsertVisible="False" ReadOnly="True" SortExpression="NewsId" /> <asp:BoundField DataField="PostDate" HeaderText="PostDate" SortExpression="PostDate" /> <asp:BoundField DataField="PostedBy" HeaderText="PostedBy" SortExpression="PostedBy" /> <asp:BoundField DataField="PostedByName" HeaderText="PostedByName" SortExpression="PostedByName" /> <asp:BoundField DataField="Title" HeaderText="Title" SortExpression="Title" /> <asp:BoundField DataField="Body" HeaderText="Body" SortExpression="Body" /> <asp:BoundField DataField="LastUpdated" HeaderText="LastUpdated" SortExpression="LastUpdated" /> <asp:CheckBoxField DataField="IsVisible" HeaderText="IsVisible" SortExpression="IsVisible" /> </Columns> </asp:GridView> i have storedprocdure which accepts 4 parameters 3 paramenters which user will supply and 1 parameter will be supplied from code-behindwhat i mean by that is:the 4 parameters storedprocedure accepts is:empid, start_date, end_date (user will supply those 3 parameters)internal_id - which internally pass along with other 3 parmeterssomething like this:internal_id, empid, start_date, end_dateany thoughts?thanks.
UpdateCommand="UPDATE PsnQualifications SET quantity=@quantity WHERE rowstatus=1 and qualId=@original_qualId"
DeleteCommand="UPDATE PsnQualifications SET rowStatus=0, lastUpdateOn=getdate(), lastUpdateBy=@createdBy WHERE rowstatus=1 and qualId=@original_qualId"
I don't know how to pass parameters required (dates) to a query1, if I'm using a subquery (query2) which is using the results of query1, but I'm not showing that field on that subquery (query2)
Example
table1 id - autonumeric id_user - id from user dates - date of register
table2 id - user id name - user name
query1 SELECT Table1.id_user, Count(Table1.id_user) AS CuentaDeid_user FROM Table1 WHERE (((Table1.datess) Between [begining] And [ending])) GROUP BY Table1.id_user ORDER BY Table1.id_user;
subquery (query2) SELECT query1.id_user, query1.CuentaDeid_user, Table2.name FROM query1 LEFT JOIN Table2 ON query1.id_user = Table2.id;
This is just an example, the think is that I want to know that if it's possible to pass the parameters requested in query1 from the SQL of the subquery (query2)?
Hi, I have a table with queries. I need to execute those queries and pass results into a variable. Then use that variable/result to execute other queries to make business decisions. EXAMPLE: TASK#1 TABLE-A :has queries below select count(*) from employee select count(* ) from mangers
I want to execute those queries and store results in @counts. How I execute all queries in table A and pass that to a variable?
TASK#2 Then I have another SQL task(may be SQL task) which use the value @counts make some decisions If @count > 1 then pass If @count <1 then fail
How can I do that?
I am still new to SSIS and not very familiar with variables. Any advice would be appreciated.
I am using a parameterized select query as displayed below to fetch values from source.
SELECT A.Account_GUID, M.Merchant_GUID, H.Household_GUID, B.BankAU_GUID, SR.SalesRep_GUID, E.Entitlement_GUID, I.Income_GUID, Exp.Expense_GUID, SP.Sales_Product_GUID, P.Product_cd, SUM(S.Sales) AS Monthly_gross_MC_VI_amt, SUM(S.Sales) - SUM(S.[Returns]) AS Monthly_net_MC_VI_amt, SUM(S.SaleTxns) AS Monthly_gross_MC_VI_tran_cnt, SUM(S.SaleTxns) - SUM(S.ReturnTxns) AS Monthly_net_MC_VI_tran_cnt FROM Account AS A LEFT OUTER JOIN dbKAIExtract.dbo.tblSales_STG AS S ON A.Account_No = S.AccountNo And S.BucketNo = ? And S.ProductCode in ('01','02') LEFT OUTER JOIN Merchant AS M ON A.Account_No = M.Account_no INNER JOIN SalesRep AS SR ON SR.Rep_SSN = isnull(A.rep_SSN,'000000000') INNER JOIN Household AS H ON A.Account_No = H.Account_no LEFT OUTER JOIN BankAU AS B ON A.Assigned_AU = B.AU_No LEFT OUTER JOIN SalesProduct AS SP ON A.Account_No = SP.Account_no And SP.Reporting_Interval_Id = ? LEFT OUTER JOIN Entitlement AS E ON E.Account_no = A.Account_No AND SP.Product_Cd = E.Entitlement_Card_Type LEFT OUTER JOIN Income AS I ON I.Account_no = A.Account_No And I.Reporting_Interval_Id = ? LEFT OUTER JOIN Expense AS Exp ON Exp.Account_no = A.Account_No And EXP.Reporting_Interval_Id = ? LEFT OUTER JOIN Product AS P ON P.Product_cd = SP.Product_cd WHERE (A.current_ind = 1) AND (SR.current_ind = 1) GROUP BY A.Account_GUID, M.Merchant_GUID, H.Household_GUID, B.BankAU_GUID, SR.SalesRep_GUID, E.Entitlement_GUID, I.Income_GUID, Exp.Expense_GUID, SP.Sales_Product_GUID, P.Product_cd
My problem is, I am not able to assign any variables to parameterized query. Can any body guide how to assign respective variables to the parameterized query. I have the above query as a part of OLE DB Source step within Data flow task.
I am working on SSRS. I need to open a new report from one report when user clicks on some particular summerized count link.
Its a sort of drilled down report. I am not getting how to pass the respected Ids (more than one) to the next report when user clicks on the link in the 1st report. These ids I want to use as a parameter (multiple) in the 2nd report to dump the rows from the database.
I'm having Parent package, which has For each loop which returns Val1 , Val2 , Val3 and Val 4
I want to create child package which accepts one parameter and call this package inside For each loop. Inside loop i want to call 4 child packages(same pakage) simultaneously.
If i create child package which access parent package variable, i will have to modify modify each child package. I cannot reused child package.
I want to know is any way or any possible way could pass the report parameter on this kind of porperties or this code? For some requirement, I just can use Jump to URL, but hope can pass the parameters on "jump to url" properties.
Adding more columns in a matrix report that don€™t belong to the columns drilldown dimensions€¦
That is, for example, having the following report:
Product Family
Product
Country City Number of units sold
Then I would add some ratios, that is, Units Sold/Months (sold per month) and other that is the average for Product Family (Units Sold/Number of Product Family), for putting an example€¦ some columns should be precalculated prior to the report so do not get into it, the real problem I don€™t see how to solve is adding one or two columns for showing these calculated column that doesn€™t depend on the column groups but they do for the rows groups€¦
Any guidance on that?
The only way I am seeing by now is to set it as two different reports, and that is not what my client wants€¦
Hi all, I wish to pass parameter from a dropdownlist in my web application to the SSIS package so as to export the user specified table. Is using package configuration the right way to do this? Any advice is appreciated!
I have stored procedure that expects 2 input parameters (@UserID uniqidentifier and @TeamID int). My datasource is SQLDataSource. So i need to pass parameters to SP..When i add parameters ans execute i got an error "....stored procedure expects @TeamId parameter, which was not supplied" But i pass them. How should i pass parameters? Maybe the reason is some mismatching of parametrs. 1 Parameter [] param = new Parameter[2]; 2 3 param[0] = new Parameter(); 4 param[0].Name = "@TeamID"; 5 param[0].Type = TypeCode.Int32; 6 param[0].Direction = ParameterDirection.Input; 7 param[0].DefaultValue = "1"; 8 9 param[1] = new Parameter(); 10 param[1].Name = "@UserID"; 11 param[1].Direction = ParameterDirection.Input; 12 param[1].DefaultValue = "edf26fd8-d7cd-4b32-a18a-fc888cac63ef"; 13 param[1].Type = TypeCode.String; 14 15 dataSource = new SqlDataSource(); 16 dataSource.ID = "Source"; 17 dataSource.ConnectionString = settings.ToString(); 18 19 dataSource.SelectCommandType = SqlDataSourceCommandType.StoredProcedure; 20 dataSource.DataSourceMode = SqlDataSourceMode.DataReader; 21 dataSource.SelectCommand = "dbo.GetAprfAssessmentTeamData"; 22 23 24 dataSource.SelectParameters.Add(param[0]); 25 dataSource.SelectParameters.Add(param[1]); 26
Hi, I want to create a stored procedure which I can pass multi parameters. This is what I need, I have a gridview which is used for displaying customer info of each agent. However, the number of customers for each agent is different. I will pass customer names as parameters for my stored procedure. Here is a sample, CREATE PROCEDURE [dbo].[display_customer] @agentID varchar(20), @customer1 varchar(20), @customer2 varchar(20), ..... -- Here I do know how many customers for each agent AS SELECT name, city, state, zip FROM rep_customer WHERE agent = @agentID and (name = @customer1 or name = @customer2) Since I can not decide the number of customers for each agent, my question is, can I dynamically pass number of parameters to my above stored procedure? Thanks a lot!
