How To Read Server Error Log Files From Another M/c??

Mar 28, 2000

I have a few servers registered in my Enterprise Manager which I am managing. Can I see the server error log files for these servers?

Any help is greatly appreciated.

View 2 Replies


ADVERTISEMENT

Pakcage Error...How To Read Files On A Different Domain?

Mar 2, 2006

So did some troubleshooting on the my previous post -http://forums.microsoft.com/forums/ShowPost.aspx?PostID=272319&SiteID=1


Thanks to everyone who tried to help... So I got some insight into what is happening.

My package was having trouble reading files on a remote domain although I mapped the drives locally. This does not cause either running the package to failed either through directly running under VSS, or Execution Utility. But it failed when I try to schedule it through SQL server agent.

I wonder if it is the security context problem and asking for help of how to get around that issue.

So I have a for each file loop container that retrieve filenames on a remote domain which has a different security account then my local account. So how I got around that was to map that drive locally to a drive letter...example W:

then I use W: as my path within my package. I was trying to figure out where I can declare the connection within my package specifically, but don't know if I could do that.

If I run this through VSS or exectuion utility, it works okay. I was able to see W: and all the files on that mapped drive and read in the data.

However, when I schedule it under SQL agent, it doesn't see any files then exited the package as success right the way, because it has nothing to do....


So is there a different between the security context on mapped drive between VSS and my SQL agent? If so...How do I get around that challenge?

BTW, the two domain do not have share accounts between each others. I had to specified and map the drives explicitly.

THANKS!
JON

View 4 Replies View Related

SQL 2012 :: Identify Whether Files Are In Read / Write Or Read Only

Mar 24, 2015

How to identify whether the files are in read write or read only?

View 1 Replies View Related

Reset Database Files From Read-only To Read-write

Jan 18, 2008

I have two database files, one .mdf and one .ndf. The creator of these files has marked them readonly. I want to "attach" these files to a new database, but cannot do so because they are read-only. I get this message:

Server: Msg 3415, Level 16, State 2, Line 1
Database 'TestSprintLD2' is read-only or has read-only files and must be made writable before it can be upgraded.

What command(s) are needed to make these files read_write?

thanks

View 7 Replies View Related

How To Read Traansaction Log Files In Sql Server

Mar 27, 2008

hi ,

how to read the transation log files in sql server 2005, any body can help me........

Nageswar.V

View 1 Replies View Related

SQL Server Upgrade 2000 - 2005 Files Read Only But Not Really

Feb 28, 2006

Hi,

I'm trying to upgrade from SQL Server 2000 to 2005. The problem I am having is that when I try to attach the existing db files I get a message that says "database cannot be upgraded because it is read only or has read only files...."

Thing is... there is no write protection on the files.

Can anyone advise me on how to overcome this problem so that I can attach the db, please?



Thank you

Robert

View 25 Replies View Related

Integration Services :: SSIS Package Which Read Excel Files Fails On Server Agent

Oct 19, 2010

I have a SSIS package which reads an excel file and loads data into a table using script component(C#) as a source. The package runs without any errors when I manually run it on my machine and on the server. But the package fails when run as a SQL Server Agent job.

I tried all the possible fixes I found on the web but still can't get it to work.

View 14 Replies View Related

How To Read Log Files

Oct 12, 2004

Some records got deleted from our DB. We don't have any triggers to log this delete transaction. Is there anyway to find out from log files or someother places to find out about this deletion. Is this information stored in transaction log. We do complete backup every night. So I think the transaction log will be truncated after the complete backup right?
Please advise on this.

thanks

View 1 Replies View Related

TRC Files, How To Read Them?

Feb 25, 2008

I saw some .trc files will be created by SQL Server Express
I would like to view them (I suppose they are 'trace files') in order to find info about problems I encounter.

Somewhere I read 'SQL Server Profiler' should be used to read them but (to me) it seems that's not being installed using the downloads I found (SQLEXPR_ADV.exe and SQLEXPR_TOOLKIT.exe) so I wonder how to get it or how to view them differently

View 1 Replies View Related

Stored Procedure (possible To Read Txt Files?)

May 21, 2008

Hi
I have decided to approach the problem here
http://www.sqlteam.com/forums/topic.asp?TOPIC_ID=103310

by using a Stored procedure, someone mentioned it's possible
for a SP to read the contents of a text file ?

IS it ?

For example i have a DB table
with fields to,from,subject,body

problem is the body field references a file (full path)
and i need to extract all info into a txt file
the full txt body, so can i perform some sort of inner
operation on the select body .. part of the SP ?

View 2 Replies View Related

Read Data From Two Files Simultaneously

Oct 17, 2007

Hello,

I have 2 tables EmployeeA(Eng) and EmployeeB(Spanish) kept in seperate mdb's. I want to add the records into Sql Server 2005 table called StateEmployee.

Procedure:
1. Loop through 2 folders..one containing table EmployeeA in mdb and other containing tbl EmployeeB in diff mdb's.
2. Pick a file from EmployeeA and EmployeeB, both at the same time.
3. Count the total no of rows in both files. If equal proceed.
4. Compare the 'employeeid' of one row of employeeA to the employeeid of EmployeeB.
5. If employee id matches, load both the rows in Sql server else file it to the error table.
6. Loop through all rows simultaneously till end of row.
7. Go to next mdb.

How do i go about this step by step. I am fairly new to SSIS.

View 1 Replies View Related

Help In Using ADO.NET To Read From Text Files(CSV Delimited)

Mar 2, 2007



Hello there

I have written a small code that is used to read records from a txt or a csv file, but when i try to read from a txt or csv file which is in unicode, i get the following error

No value given for one or more required parameters........this error is recieved on the following line

dtadpt.Fill(DataSet.Tables("table2"))



The code for reading from a file is as follows

Dim dtrow As DataRow

Dim cmdtxt, file, path

Dim dtadpt As New System.Data.OleDb.OleDbDataAdapter

Dim Command As System.Data.OleDb.OleDbCommand

Dim Conn As System.Data.OleDb.OleDbConnection

file = 'name of the file'

path = 'path of file'

Conn = New System.Data.OleDb.OleDbConnection("Provider=Microsoft.Jet.OLEDB.4.0;" & _

"Data Source=" & path & ";" & "Extended Properties=""text;HDR=YES;FMT=Delimited""")

For Each dtrow In DataSet.Tables("table1").Rows

Dim id



id = dtrow.Item("id")

cmdtxt = "Select * from " & file & " where id = " & id



Command = New System.Data.OleDb.OleDbCommand(cmdtxt, Conn)

dtadpt.SelectCommand = Command

Next

DataSet.Tables.Add("table2")

dtadpt.Fill(DataSet.Tables("table2"))

this code works if i choose a csv or txtfile which is in ANSI format. But i want to read from a unicode file because i have some information in that unicode format that i want to store

any idea how this can be possible



thanks and best regards

Saad

View 1 Replies View Related

Storing Zip Files Read As Binary In A Field

Feb 16, 2004

i need to store a bmp or zipped file in a field of a ms sql db. i read the file using vb6 o.net, and in my mind i think sto store it in binary mode. the files could be more of 12 mega. whitch kind of field a could use?

View 1 Replies View Related

Can 98SE Read Files From NTFS Drives?

Jul 23, 2005

I have been told by a local PC club technician that 98SE cannot read NTFSdrives in a network. Is this true? TIA, Jim.

View 2 Replies View Related

How To Read Text Inside HTML Files

Apr 16, 2008

Hi,

I just want to know how to search text/record inside the Html files. I had one column in my database named €˜Path€™ I saved the html file names in this column and the physical files in a folder. Full Text search is enabled on this column. Whenever I try to search it returns nothing.

Just need one small example to know how it works, what functions used to search inside the files and how.

Thanks
Navi

View 8 Replies View Related

Server Error In '/' Application. Database Cannot Be Upgraded Because It Is Read Only??

Dec 5, 2005

 Server Error in '/' Application.


Database 'C:INETPUBDEMO.TRUTHSTONE.COMAPP_DATAASPNETDB.MDF' cannot be upgraded because it is read-only or has read-only files. Make the database or files writeable, and rerun recovery.Cannot open user default database. Login failed.Login failed for user 'NT AUTHORITYNETWORK SERVICE'.
Hi,
Strange one.  I have copied my working web-site to the production server and get this message.
Tried copying new set of database files and reset the server to ensure no applications could be accessing the database files.  Still get the same error.
Works fine on my Visual Studio VWD Express version.
 
Mitch
PS I am not trying to upgrade the database, just use it!
 

View 1 Replies View Related

Sql Server 2005 Dev Edition Error - Unexpected Error While Updating Installed Files

Feb 14, 2007

I am attempting to install SQL Server 2005 Developer Edition onto a Windows XP Pro SP2 machine, but unfortunately each time that I attempt to install I receive an error message in the summary log as follows:

Product : Microsoft SQL Server 2005
Product Version: 9.00.1399.06
Install : Failed
Log File : C:Program FilesMicrosoft SQL Server90Setup
Last Action : InstallFinalize
Error String : The setup has encountered an unexpected error while Updating Installed Files.
The error is : Fatal error during installation.
Error Number : 29528

There is probably a simple solution for the issue but unfortunately I am unaware of what it is? I can€™t tell if the issue is specific to registry settings, security, file types, etc€¦ The information below surrounds the error w/in the log, any suggestions would be greatly appreciated?

Thanks, Jennifer

MSI (s) (6C:94) [16:02:23:713]: Executing op: SetTargetFolder(Folder=C:WINNTsystem32)
MSI (s) (6C:94) [16:02:23:713]: Executing op: SetSourceFolder(Folder=1System)
MSI (s) (6C:94) [16:02:23:713]: Executing op: FileCopy(SourceName=sqlctr90.dll,SourceCabKey=sqlctr90.dll.7188DA12_A95E_46B7_8623_9D93B5260E2A,DestName=sqlctr90.dll,Attributes=16384,FileSize=66264,PerTick=32768,,VerifyMedia=1,,,,,CheckCRC=0,Version=2005.90.1399.0,Language=1033,InstallMode=58982400,,,,,,,)
MSI (s) (6C:94) [16:02:23:713]: File: C:WINNTsystem32sqlctr90.dll; To be installed; Won't patch; No existing file
MSI (s) (6C:94) [16:02:23:713]: Source for file 'sqlctr90.dll.7188DA12_A95E_46B7_8623_9D93B5260E2A' is compressed
MSI (s) (6C:94) [16:02:23:713]: Note: 1: 2318 2: C:WINNTsystem32sqlctr90.dll
MSI (s) (6C:94) [16:02:23:713]: Note: 1: 2360
MSI (s) (6C:94) [16:02:23:713]: Note: 1: 2360
MSI (s) (6C:94) [16:02:23:723]: Executing op: CacheSizeFlush(,)
MSI (s) (6C:94) [16:02:23:723]: Executing op: InstallProtectedFiles(AllowUI=0)
MSI (s) (6C:94) [16:02:23:723]: Executing op: ActionStart(Name=CAFTEInstallFTERef.68C6D15C_77E0_11D5_8528_00C04F68155C,,)
MSI (s) (6C:94) [16:02:23:733]: Executing op: CustomActionSchedule(Action=CAFTEInstallFTERef.68C6D15C_77E0_11D5_8528_00C04F68155C,ActionType=1025,Source=BinaryData,Target=InstallFTERef,CustomActionData=C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnFTERef|C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData)
MSI (s) (6C:2C) [16:02:23:743]: Invoking remote custom action. DLL: C:WINNTInstallerMSI64E.tmp, Entrypoint: InstallFTERef
FTECa.DLL: INFO: FTE: InstallFTERef(), Entering...
FTECa.DLL: INFO: FTE: GetFTERefInstallParams: FTERef : C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTDataoiseCHS.txt Size=1000 IDR=1696
.
.
.
.
.
.
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData sSVE.xml Size=1035 IDR=1142
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTDataoiseTHA.txt Size=1036 IDR=697
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData sTHA.xml Size=1037 IDR=1142
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTDataoiseTRK.txt Size=1038 IDR=2224
MSI (s) (6C:94) [16:02:24:454]: Executing op: ActionStart(Name=Rollback_UpdateETWMOFWithGUID.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Removing registry updates,)
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData sTRK.xml Size=1039 IDR=1142
MSI (s) (6C:94) [16:02:24:454]: Executing op: CustomActionSchedule(Action=Rollback_UpdateETWMOFWithGUID.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1345,Source=BinaryData,Target=Rollback_UpdateETWMOFWithGUID,CustomActionData=100Removing registry updates100000{2373A92B-1C1C-4E71-B494-5CA97F96AA19}MSSQLSERVERC:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinn)
MSI (s) (6C:94) [16:02:24:454]: Executing op: ActionStart(Name=Do_UpdateETWMOFWithGUID.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Updating Installed Files,)
MSI (s) (6C:94) [16:02:24:454]: Executing op: CustomActionSchedule(Action=Do_UpdateETWMOFWithGUID.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1025,Source=BinaryData,Target=Do_UpdateETWMOFWithGUID,CustomActionData=010Updating Installed Files100000{2373A92B-1C1C-4E71-B494-5CA97F96AA19}MSSQLSERVERC:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinn)
MSI (s) (6C:10) [16:02:24:464]: Invoking remote custom action. DLL: C:WINNTInstallerMSI64F.tmp, Entrypoint: Do_UpdateETWMOFWithGUID
<Func Name='LaunchFunction'>
Function=Do_UpdateETWMOFWithGUID
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='203'>
Doing Action: Do_UpdateETWMOFWithGUID
PerfTime Start: Do_UpdateETWMOFWithGUID : Tue Feb 13 16:02:24 2007
<Func Name='Do_UpdateETWMOFWithGUID'>
Calling installSqlEvent Trance
The arguments that are passed to InstallSqlEventTrace are InstanceName: MSSQLSERVER , ProductCodeL: {2373A92B-1C1C-4E71-B494-5CA97F96AA19} , BinPath: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinn
INFO: Checking installed version
INFO: Writing MOF file
ERROR: Unable to open registry key: HRESULT = 0x80070005, Key = SYSTEMCurrentControlSetControlWMISecurity

The value returned is -2147024891
<EndFunc Name='Do_UpdateETWMOFWithGUID' Return='1603' GetLastError='0'>
PerfTime Stop: Do_UpdateETWMOFWithGUID : Tue Feb 13 16:02:24 2007
Gathering darwin properties for failure handling.
Error Code: 1603
MSI (s) (6C!D0) [16:02:37:273]: Product: Microsoft SQL Server 2005 -- Error 29528. The setup has encountered an unexpected error while Updating Installed Files. The error is: Fatal error during installation.

Error 29528. The setup has encountered an unexpected error while Updating Installed Files. The error is: Fatal error during installation.

<EndFunc Name='LaunchFunction' Return='1603' GetLastError='203'>
MSI (s) (6C:94) [16:02:37:283]: User policy value 'DisableRollback' is 0
MSI (s) (6C:94) [16:02:37:283]: Machine policy value 'DisableRollback' is 0
Action ended 16:02:37: InstallFinalize. Return value 3.

View 8 Replies View Related

Column &&amp; Row Delimiters To Read Flat Files Into SQL Table

May 6, 2008



Hi,

I have a package that reads a fixed width flat file data into a single CHAR column in an sql server 2005 table.

In the "Columns" tab of the Flat File Connection Manager, I set the RowDelimiter value to {LF} and nothing for the ColumnDelimiter (since I read the entire row from the flat file into a single column in my sql table).

However, in the "Advanced" tab, the ColumnDelimiter Misc property shows {LF}. This was working fine for me.

The problem I was facing was with some files which were recently identified to have rows containing a special character (probably ASCII ZERO) in the middle of the row. So, now if the record was having 400 characters and the 200 th character had this special character, the package was writing the first 200 characters into the sql table and ignoring the rest of the characters.

I am sure that the special character was ASCII ZERO - I wrote a script to read each character in the line and find the ascii code for it.

Has anyone faced this problem ever. If so, pls let me know your solution or any ideas that can help sort this problem. Your help would be much appreciated.

Thanks!!

View 5 Replies View Related

Transact SQL :: Read Data From CSV Files And Insert Into DataBase

May 6, 2015

I have a requirement to

a. Read data from Different CSV files.
b. insert and update data to Data base in multiple table using joins.

This execution runs for 1-2 hours.I can use C# with Ado.net, but only concern I see is if in between execution fails due to some connection or other error. All insert data has to be cleaned up again.I feel writing and Store procedure inside transaction, which will take path's for CSV file as input and insert data in database. using transaction we will have flexibility rollback to original state.

View 9 Replies View Related

Is Ssis The Only Technology That Can Read/write Raw Data Type Files?

Sep 21, 2007

I'm contemplating a sql server archive strategy that rolls really old data off any sort of dbms and onto low cost media like dvds in a non relational archive format. I dont want to ever worry about these archives spanning different versions of sql when i go to retrieve a range of data that happens to span sql versions (eg one disc was sourced from 2005 another by 2008 but my report needs a union of both).

So I'm thinking about neutral/efficient formats for these archives and a live homegrown catalog that can determine exactly what disc(s) need to be mounted based on passed from and to date parameters...all so that the data that might span discs (and versions and maybe even schemas) can be merged and loaded into my sql version d'jour's "throw away" archive database for a one time report or other unplanned activity.

I remember raw data types being very convenient as an ETL format for our customers who have ssis, but wouldn't want our sqlexpress customers to be left without the archiving capability. Do the "things" that read and write raw data files really originate in some special T-SQL command that all sql editions can use, or is it strictly an ssis thing?

View 4 Replies View Related

Transact SQL :: Making Server Database Read / Write From Read Only

Jan 12, 2012

i attached adventure works in sql server 2008 and it showing as read only ,make it read write or remove read only tag from database.

View 11 Replies View Related

SQL Server Admin 2014 :: AlwaysOn Read Only Replica - SP Execution Error

Oct 8, 2015

We have always on setup in our environment with read only replica. The primary database has 2 schema one is a dbo and other xyz. We have some store procs created in dbo schema and xyz schema. These store procs are being used by SSRS reports to retrieve the data (select only) no data changes will be made.

when we run the store proc from the read only server the storeprocs in the dbo schema run fine but xyz schema are failing with the message saying failed to update the database as this is a read only...

View 1 Replies View Related

SQL 2012 :: Running 2005 SSIS Packages That Read FoxPro Files?

Aug 26, 2013

We are in the process of upgrading to a new SQL 2012 server but we have many packages that load data from dbf files created with FoxPro into one of our databases. We have not converted the packages and run them with DTS but we get the following error:

Error: 2013-08-26 11:05:27.36
Code: 0xC0209303
Source: BenchmarkLoad Connection manager "OLEDB NPIONE.Investment.middleTierSQL"
Description: The requested OLE DB provider SQLNCLI.1 is not registered. If the 64-bit driver is not installed, run the package in 32-bit mode. Error code: 0x00000000.

[Code] .....

I searched for OLEDB and ODBC drivers for SQL 2012 64 bit but cannot find any that is newer than the 2005 that we have. What can I do short of changing the source files to overcome this issue?

View 8 Replies View Related

Uninstall Error : The Setup Failed To Read IISmimemaptable The Server Code Is 2147024893

Feb 23, 2007

Hi, I get the following error message error : "the setup failed to read IISmimemaptable the server code is 2147024893" and I cannot uninstall SQL Server 2005. Any idea this is happening. thanks!



chi

View 2 Replies View Related

Read Text File From SQL Server, Read Its Content, And Load It In RichTextBox (Related Component: Context.Response.BinaryWrite(), And StreamReader)

Nov 26, 2007

OBJECTIVE: I would like to read a text file from SQL Server 2000, read the text file content, and load its conntents in a RichTextBoxTHINGS I'VE DONE AND HAVE WORKING:1) I've successfully load a text file (ex: textFile.txt) in sql server database table column (with datatype Image) 2) I've also able to load the file using a Handler as below: using System;using System.Web;using System.Data.SqlClient;public class HandlerImage : IHttpHandler {string connectionString;public void ProcessRequest (HttpContext context) {connectionString = System.Configuration.ConfigurationManager.ConnectionStrings["NWS_ScheduleSQL2000"].ConnectionString;int ImageID = Convert.ToInt32(context.Request.QueryString["id"]);SqlConnection myConnection = new SqlConnection(connectionString);string Command = "SELECT [Image], Image_Type FROM Images WHERE Image_Id=@Image_Id";SqlCommand cmd = new SqlCommand(Command, myConnection);cmd.Parameters.Add("@Image_Id", System.Data.SqlDbType.Int).Value = ImageID;SqlDataReader dr;myConnection.Open(); cmd.Prepare(); dr = cmd.ExecuteReader();if (dr.Read()){ //WRITE IMAGE TO THE BROWSERcontext.Response.ContentType = dr["Image_Type"].ToString();context.Response.BinaryWrite((byte[])dr["Image"]);}myConnection.Close();}public bool IsReusable {get {return false;}}}'>'>
<a href='<%# "HandlerDocument.ashx?id=" + Eval("Doc_ID") %>'>File
</a>- Click on this link, I'll be able to download or view the file WHAT I WANT TO DO, BUT HAVE PROBLEM:- I would like to be able to read CONTENT of this file and load it in a string as belowStreamReader SR = new StreamReader()SR = File.Open("File.txt");String contentText = SR.Readline();txtBox.text = contentText;BUT THIS ONLY WORK FOR files in the server.I would like to be able to read FILE CONTENTS from SQL Server.PLEASE HELP. I really appreciate it.

View 1 Replies View Related

Integration Services :: SSIS Project - Read Multiple Flat Files With Different Formats

Jan 15, 2014

I need to import multiple flat files with different formats into different tables of the sql server database and not able to figure out the best way out in ssis to do so...

What are the possible methods in ssis to do so and if possible the process which can be dynamic as file names or columns might change in future.

View 7 Replies View Related

Do We Control Over Sql Server Error Log Files ?

May 9, 2001

Hi, everybody
I am trying to run job that will
look for errors in error log files and save it to text file
In order to get up to last minute infromation I am using errorlog

1. at what point errorlog ranamed to errorlog1?
2. Can configurate size of errorlog file ?
3. Can I configurate time when errorlog ranamed to errorlog1

when i run in Sql Query analyser
print '------------ level 16 from last Sql errorlog file ----------------'
print 'These messages indicate errors that can be corrected by the user '
USE master
EXEC xp_cmdshell 'findstr /i /n /c:"level 16" InnvisionGMSSQL7LOGerrorlog.*'
go

I getting output
------------ level 16 from last Sql errorlog file ----------------
These messages indicate errors that can be corrected by the user

(0 row(s) affected)

when my job saves this command to file
I getting output
------------ level 16 from last Sql errorlog file ---------------- [SQLSTATE 01000]
These messages indicate errors that can be corrected by the user [SQLSTATE 01000]

How replace [SQLSTATE 01000] on user friendly message

Thanks

View 2 Replies View Related

VS2005 Error: Connection To SQL Server Files (*.mdf) Requires SQL Server Express 2005 To Function Properly.

Mar 6, 2008



Good Evening All,

I've serached this forum and Google'd for a resolution to this issue, to no avail. Here's the scenario:
I'm running VS 2005 on Windows Media Center laptop and need to create ASP.net membership for my web application built using VB. I have SQL Server Developer installed with instance name MSSQLSERVER. Previously, I uninstalled SQL Express and installed Developer edition and can now open and utilize Management Studio.

Now, when I try to create a new SQL Server database in my solution's App_Data directory, I receive the above error. I already changed instance name in VS2005 per Tools-Options-Database Tools-Data Connections to MSSQLSERVER.

Could someone provide me with a list of procedures to ensure proper setup of VS2005 with SQL Server Developer Edition?

Thanks much for your help.

View 5 Replies View Related

Error [I/O Error (bad Page ID) Detected During Read At Offset 0x000001ad65a000

Feb 24, 2005

When we try to run aggregation or purge queries on some tables
we are getting following message:

" error [I/O error (bad page ID) detected during read at offset 0x000001ad65a000 in file 'E:MSSQL2KDataGenesys_DataMartGenesys_Datamart.mdf '. Severity 24, State 2, Procedure 'PWMGENESYSDB1 n u! ll', Line 1]"

After this we executed DBCC CHECKDB. Attaching the output obtained after executing this command, to fix these errors we executed DBCC repair_allow_data_loss. I am attaching output for this also. Pls go thru the logs and pls let me know what could be the problem and how it can be addressed.

Thnx & Rgds
Malla

View 2 Replies View Related

SqlWb.exe : Application Error- Memory Could Not Be Read Error

Sep 14, 2007



Hi,

I am trying to execute a SSIS package from a client through BIDS, but when I start BIDS, I am getting the error -

SqlWb.exe : Application error - The instruction at "0X77D...." referenced memory at "0X00000002". The memory could bot be "read".
Click on OK to terminate the program.
Click on CANCEL to terminate the program.

Please help.

Other information:

I have tried running the package on the server and it executes properly. I really dont know why this is a problem with the SQL Server clients alone. I have also tried googling around and could not find any resolution. Can anyone point me to the right direction please!!!


Thanks in advance!!!

View 2 Replies View Related

Error Creating Mdf - Connection To SQL Server Files (*.mdf) Require SQL Express 2005 To....

Apr 11, 2006

Connection to SQL server files (*.mdf) require SQL express 2005 to function properly.  please verify the installation of the component or download from http://go.microsoft.com/fwlink/?linkid=49251
 
I AM GOING TO RIP MY HAIR OUT WITH THIS PROBLEM.  I have reinstalled both sql server express 2005 and VWD about 5 times with the same problem.  please, please, please someone throw me a bone here  and help me resolve this problem. 
When I create a new EMPTY website and I rightclick on my website in the solution explorer and choose add item, I chooe SQL Database, I give it a name 'database.mdf' and click add.  I get the following message:
you are attempting to add a database to an asp.net application.  for a database to be gfenerally consumable in your site, it should be placed inside the 'app_data' folder.  would you like to place the database inside the 'app_data' folder?  I click YES (I know this message is normal)
then I get the following message:
Connection to SQL server files (*.mdf) require SQL express 2005 to function properly.  please verify the installation of the component or download from http://go.microsoft.com/fwlink/?linkid=49251
I can add anything else but this damn mdf file. 
thanks for all your help in advance.
 
 

View 2 Replies View Related

Error 1601 Installing Microsoft SQL Server 2005 Setup Support Files

Dec 26, 2007

Hi guys,


I have problems installing SQL server 2005, any help ??
Tks...

This is the log file description...

=== Verbose logging started: 25/12/2007 21:05:41 Build type: SHIP UNICODE 3.01.4000.4039 Calling process: c:Archivos de programaMicrosoft SQL Server90Setup Bootstrapsetup.exe ===
MSI (c) (AC:50) [21:05:41:656]: Resetting cached policy values
MSI (c) (AC:50) [21:05:41:656]: Machine policy value 'Debug' is 0
MSI (c) (AC:50) [21:05:41:656]: ******* RunEngine:
******* Product: {53F5C3EE-05ED-4830-994B-50B2F0D50FCE}
******* Action:
******* CommandLine: **********
MSI (c) (AC:50) [21:05:41:656]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (AC:50) [21:05:41:656]: Grabbed execution mutex.
MSI (c) (AC:50) [21:05:41:671]: No se puede conectar al servidor. Error: 0x80040154

MSI (c) (AC:50) [21:05:41:671]: Failed to connect to server.
MSI (c) (AC:50) [21:05:41:671]: MainEngineThread is returning 1601
=== Verbose logging stopped: 25/12/2007 21:05:41 ===

View 11 Replies View Related

Error 1603 Installing Microsoft Sql Server 2005 Setup Support Files

Feb 13, 2008

I'm attempting to install the standard version of SQL server 2005 on XP SP2. I'm getting the following:

Errors occurred during the installation:
Error 1603 installing Microsoft SQL Server 2005 setup support files.

View 11 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved