The operation system is windows xp, and before i installed the SQL SERVER2005 the SQL SERVER2000 had installed.
the course of installing the SQL SERVER2005 has no error at all.
but i can not find the Database Engine under MSSQLSERVER from surface area configuration
==============
thank you in advance for any help
I want to send mails from SQL Server 2005 Management Studio Express for which I referred to the article at http://www.databasejournal.com/features/mssql/article.php/3626056. I could successfully do the steps from step 1 to step 6 listed at the above URL. In fact, when I sent a test mail (as cited in step 6), SQL Server displays the message Mail queued though the mail didn't get delivered. The mail server address I am using is smtp.mail.yahoo.co.uk.
But when I expand the Management node in the Management Studio Express GUI, I don't find Database Mail as a child node. In fact, there are only 2 child nodes under the Management node - SQL Server Logs & Activity Monitor.
Why isn't Database Mail listed under the Management node? What am I missing here?
Also when I open Surface Area Configuration & then click Surface Area Configuration for Services and Connections, the following error gets generated:
Computer localhost does not exist on the network, or the computer cannot be configured remotely. Verify that the remote computer has the required Windows Management Instrumentation components and then try again. (SQLSAC)
Additional Information:
The type initializer 'System.Management.ManagementPath' threw an exception. (System.Management)
Unable to cast COM object of type 'System.Management.WbemDefPath' to interface type 'System.Management.IWbemPath'. The operation failed because the QueryInterface call on the COM component for the interface with IID '(38C15AF2-736C-477E-9E51-238AF8667DCC)' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)). (System.Management)
When I click Surface Area Configuration for Features, it generates the error cited above but from the first bulleted list.
How do I overcome this error? I confirmed that Windows Management Instrumentation is running by opening Services from Control Panel ---> Administrative Tools.
I am on WinXP Pro SP2. Please note that I also have SQL Server 7.0 installed in my machine which is a standalone m/c.
Thanks
I have just finished installing SQL 2005 Ent Edition on Win 2000 Adv Server, SQL2005 SP2, and SP2 Hotfix KB934458. After the installation, I could see and configure all services via SQL Configuration Manager and SQL Server Surface Area Configuration tools. This worked for a couple of days and now both configuration tools no longer detect SQL2005 components. SQL Server Surface Area Configuration issued an error that said "No SQL Server 2005 components were found on specified computer. Either no components are installed, or you are not an administrator on this computer. (SQLAC)". SQL Configuration Manager did not list any installed services. I don€™t know what caused this. Anyone has any idea? Please help! Below is the Installation Report which shows installed components.
===================================
The following components are installed on this server
DEV
Analysis Services
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Database Engine
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Reporting Services
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
QA
Analysis Services
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Database Engine
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Common components
Integration Services
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Notification Services
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Workstation Components
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
===================================
Dear All,
i'm trying to publish a maintenance plan in sql server 2005.
but soon after right click and selecting a new maintenance plan, it is displaying an alert with "AgentXP's component" is turned off.
please let me know how to ON those services. i've read and followed the instructions but i was unable to find where exactly to start.
please guide me in this regard
my version of OS is sql server 2000 professional
my version of sql server is :Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86) Oct 14 2005 00:33:37 Copyright (c) 1988-2005 Microsoft Corporation Enterprise Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
Vinod
Even you learn 1%, Learn it with 100% confidence.
Hi, we are having a strange problem when trying to configure the surface area of my sql server 2005. When we open the tool the only nodes that appears are: Reporting Services and Integration Services. But the Database Engine node is not showing. What do we have to do to access the Database Engine node and configure Remote Connection.
Any help would be extremely appreciated...
Up til now i've been working with Access, i have only got a few weeks experience with SQL, so dont eat me.
I set up a SQL Database, and placed it into my site, etc, set up all the connection strings. It connects fine, but cannot log in. It tells me;
Cannot open database "C:USERSJAREDDESKTOPSTYXSTYX - BUILD 2APP_DATASTYXDB.MDF" requested by the login. The login failed.Login failed for user 'Webdev01Jared'.
I'm running Vista (x86), and SQL Server 2005 Express SP2, and i'm aware that Vista by default does not automatically enable remote access in SQLExpress for local admins.
So i go into Surface Area Configuration. I've read about it, and it's two steps, Click "Add New Administrator", then select the priveleges in the left box and click the button to put them in the right box. Simple enough, and it works, sure, click the button, it moves across, done.
But. Hit OK. It's done nothing, i still cant connect, and the cherry on top; open up the SAC again to check and there is nothing in the right box. It's exactly how it was before i changed it. The problem is definitely this, and not the account, as i can log in for SQL Management Studio just fine, with the same windows authentication credentials.
Thanks in advance.
Hi Dear
I have been trying to add SQL database to my web application and have to configure the SQL to allow remote accee.
I would like to start the Database Engine Service when I click on start button to start the service it dissplay following message:
An error occurred while performing this operation
Severa; time I restart the computer still, When I try it is same problem.
thank for yout help.
I am currently running a Windows Vista Enterprise OS platform using SQL Express, whenever i add a user to the administrator group using the SQL Server Surface Area Configuration UI, each time i click on the link to add New Administrator, the previous administrator i just added still appears on the left - just as if i never added this user previously.
Is there a way around this issue? or is this a SQL Express problem, because i also tried doing it with SQL Server Enterprise edition on a Win2K3 SP2 box and it gives the same results.
Feedback is greatly appreciated.
Thanks
Sorry for the annoying. I would like to the configuration settings for the surface area. There's an option which able to let us change computer (whether is local computer or remote computer). Let say I put my own computer's name (Hans as example) for configuration as the remote compute, it's work fine to me. However, if I put my remote computer's name, it displays this error message to me.
Error :
Computer Tomato does not exist on the network, or the computer cannot be configured remotely. Verify that the remote computer has the required Windows Management Instrumentation components and then try again.
I am sure that the remote computer is working since I am able to ping the remote computer and test on telnet as well. But why it seems that surface area can't detect my remote computer. Hope can get some resistance from everyone here. Thanx alot.
Best Regards,
Hans
Hello all, I hope someone can help me with this.
This is a new SQL Server 2005 cluster that we just installed for the first time, with SP2. I am trying to use a stored procedure with xp_cmdshell to run a script to backup the databases. I get the following error: locked access to procedure 'sys.xp_cmdshell' of component 'xp_cmdshell' because this component is turned off as part of the security configuration for this server. A system administrator can enable the use of 'xp_cmdshell' by using sp_configure. For more information about enabling 'xp_cmdshell', see "Surface Area Configuration" in SQL Server Books Online.
So I started Surface Area Configuration on the local SQL Server itself, and clicked on "Surface Area Configuration for Features". I then got the following error:
"Failed to connect to localhost. (Mirosoft.SqlServer.ConnectionInfo)
Additional information: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2)
I am logged onto the server as a user with Admin privs; I installed SQL Server using that id. I am logged in via remote connection, so I know it allows remote connections... and I am logged into the server itself when I try to run the tool, so I don't understand why it's saying that it's trying to connect remotely.
Has anyone else ever experienced this problem? Thanks for any help you can give.
Best, Amy
I was studying the SQL Server 2005 Surface Area Configuration tool to see how i could increase security.
I cannot find some of the components in “Surface area Configuration of Features�.
For example DAC appears to be missing. This is a dedicated administrator connection that allows an administrator to connect to a server.
Is this because I have SQL 2005 express instead of the professional version or could it even be to do with the operating system (XP home)
Only the following components are listed under "Database Engine":
Ad Hoc Remote Queries
CLR Integration
Native XML Web Services
OLE Automation
Service Broker
Xp_cmdshell
Thanks
I installed SQL Server 2005 Enterprise Edition (64-bit) and then applied SQL SP2. When I launch the "SQL Server 2005 Surface Area Configuration" and choose "Surface Area Configuration for Features" I'm trying to enable xp_cmdshell.
After ticking the checkbox, and clicking Apply, I receive the error below. Anyone have any ideas on how to fix this?
===================================
Alter failed. (Microsoft.SqlServer.Smo)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Alter+Configuration&LinkId=20476
------------------------------
Program Location:
at Microsoft.SqlServer.Management.Smo.ConfigurationBase.Alter(Boolean overrideValueChecking)
at Microsoft.SqlSac.Public.Smo.SetSetting(Credentials credentials, DatabaseFeature feature, Int32 value)
at Microsoft.SqlSac.MainPanel.UserControlSSxp_cmdshell.ProcessOK(HashKey givenKey, String machineName)
at Microsoft.SqlSac.MainPanel.FormFeatures.commitDBChanges()
at Microsoft.SqlSac.MainPanel.FormFeatures.commitChanges()
===================================
Could not load file or assembly 'Microsoft.SqlServer.BatchParser, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
Program Location:
at Microsoft.SqlServer.Management.Common.ServerConnection.GetStatements(String query, ExecutionTypes executionType, Int32& statementsToReverse)
at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String sqlCommand, ExecutionTypes executionType)
at Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQuery(String cmd)
at Microsoft.SqlServer.Management.Smo.ConfigurationBase.DoAlter(Boolean overrideValueChecking)
at Microsoft.SqlServer.Management.Smo.ConfigurationBase.Alter(Boolean overrideValueChecking)
hi ; everybody
i have almost installed sql server 2005 enterprise edition on windows xp sp2 and i havent connected to any server .i have taken error:40 with my all attempts.tcp/ip protocol have been enabled on sql server configuration manager.i have tried to start sql server surface area configuration but every my attempt have been resulted a fault which is below.
[No SQL Server 2005 components were found on the specified computer. Either no components are installed, or you are not an administrator on this computer. (SQLSAC)]
i dont suppose that i did something wrong when i setupped.because i read every article on the internet about how to make setup.also; i setupped numbers of times on my pc.
but i didnt accomplished.
i thank for any help.please; give your solution explicitly.
I've run into a problem after upgrading production servers running under Microsoft Cluster Server, Windows Enterprise Server 2003 SP1, and SQL Server 2005 SP1 Enterprise Edition.
Once I completed the upgrade and applied the patch, I needed to examine the values set in the Features component of the Surface Area Configuration tool. The tool attempts to connect to localhostinstancename, but reports the following error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error:26 - Error Locating Server/Instance Specified)(Microsoft SQL Server)
I'm logged into the virtual server via Remote Desktop, but the SAC tool thinks I'm logged into the physical server supporting the virtual server. I seem to be caught between a rock and a hard place here, as I can't enable remote connections without first gaining access on the server itself.
Any help will be greatly appreciated.
Hello, I've installed SQLServer2k5 Sept CTP with the following config: W2K SP4 Pro, SQL2K5 Std Sept CTP complete clean install. Everything works except SAC for features. I get the error below when trying to start it. SAC for Services & Connections connects without problem and has local & remote connections via both TCP/IP and Named Pipes enabled for the server, and local & remote connections enabled for analysis services. All SQL2K5 components & services are started in the Services control panel. I've looked at port useage, wondering if some other process is using the port that SAC for features is pinging, but since SAC for Services & Connections works fine that doesn't seem to be culprit.
I also get an error when running the Tuning Advisor, saying it can't connect, but demoted that to just a warning by closing some extraneous connections to the servere (had >10 open). Still get a warning, but it doesn't prevent the Tuning Advisor from completing.
I've tried turning on and off various services, from Remote Registry Service to IIS, but no luck. Anyone know what else I chould check to troubleshoot this? Thanks!
Failed to connect to server localhost
Hi,
I'm posting this in the Setup forum as I think the problem relates to my SQL Server Configuration. Being new to server management pls ask for more info if I don't explain this clearly enough, I'm running out of idea.
Here's the set up:
Windows Server 2003 Web Edition SP2
SQL Server 2005 Enterprise Edition SP1
When I try to run apps I get the following message:
SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
I've found some great notes on the TechNet forums explaining this error and how to resolve it by configuring the Surface Area Tool... remote connections etc
But, this is where I draw a blank as I cannot access the Surafce Area Configuartion for Services and Connections because certain components are not installed, or I do not have admin rights. I definitly have the admin rights, but have no idea where to start looking for aforementioned components.
During the SQL Server install I recevied the warning:
SQL Service Edition System Compatibility - Some components of this edition of SQL Server are not supported on this Op system.
It sounds pretty generic and doesn't offer anymore details, but could this be effecting it?
I've also noticed that when I open SQL Server Configuration Manager and click on SQL Server 2005 Services nothing appears in the right-hand panel??? I'm sure there should be???
I've been all over TechNet & Books online and cannot find any reference for what I'm experiencing.
Any help or guidance will be greatly appreciated!
Thanks!
Being very new to SQL Server, I have to ask - when I try to connect to SQL Server 2005 using TCP/IP I cannot. To accomplish this I was directed to use the Surface Area Configuration utility.
When I do this, I do not see the Database Engine the docks reffer to - any help/comments/suggestions?
Thanks,
Chris
in Surface Area Configuration for Features.
What the problem is?
Thanks in advance.
I tried to apply the SP2 on a newly installed SQL Server 2005 Developer edition. The installation failed and the MSSQLSERVER service does not start. I work on 32 bits Windows Server 2003 Standard Edition SP1 with all the patches up to date. I downloaded SQL Server 2005 SP2 on March 15, 2007.
Here are the error messages from 2 of the log files:
Summary.txt:
Product : Database Services (MSSQLSERVER)
Product Version (Previous): 1399
Product Version (Final) :
Status : Failure
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log
Error Number : 29534
Error Description : MSP Error: 29534 Service 'MSSQLSERVER' could not be started. Verify that you have sufficient privileges to start system services. The error code is (-2146885628) Cannot find object or property.
SQL9_Hotfix_KB921896_sqlrun_sql.msp.log:
Doing Action: ComponentUpgradeInstall
PerfTime Start: ComponentUpgradeInstall : Sun Mar 18 17:37:33 2007
<Func Name='ComponentUpgradeInstall'>
<Func Name='ComponentUpgrade'>
Failed to add file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG' to datastore in AddFileToFailureHandling
Service MSSQLSERVER with parameters '-r' is being started at Sun Mar 18 17:37:33 2007
Failed to start service MSSQLSERVER. Error code 2148081668
Service failed unexpectedly (2148081668)
Error Code: -2146885628
Windows Error Text: Cannot find object or property.
Source File Name: sqlsetuplibservice.cpp
Compiler Timestamp: Wed Jun 14 16:29:04 2006
Function Name: sqls::Service::Start
Source Line Number: 301
And below you can see the content of the SQL error log:
2007-03-18 19:46:11.51 Server Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86)
Feb 9 2007 22:47:07
Copyright (c) 1988-2005 Microsoft Corporation
Developer Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
2007-03-18 19:46:11.51 Server (c) 2005 Microsoft Corporation.
2007-03-18 19:46:11.51 Server All rights reserved.
2007-03-18 19:46:11.53 Server Server process ID is 796.
2007-03-18 19:46:11.53 Server Authentication mode is WINDOWS-ONLY.
2007-03-18 19:46:11.53 Server Logging SQL Server messages in file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG'.
2007-03-18 19:46:11.53 Server This instance of SQL Server last reported using a process ID of 712 at 3/18/2007 5:39:48 PM (local) 3/18/2007 3:39:48 PM (UTC). This is an informational message only; no user action is required.
2007-03-18 19:46:11.53 Server Registry startup parameters:
2007-03-18 19:46:11.53 Server -d C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf
2007-03-18 19:46:11.53 Server -e C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG
2007-03-18 19:46:11.53 Server -l C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf
2007-03-18 19:46:11.56 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2007-03-18 19:46:11.56 Server Detected 2 CPUs. This is an informational message; no user action is required.
2007-03-18 19:46:11.87 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2007-03-18 19:46:11.98 Server Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-03-18 19:46:14.06 Server Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-03-18 19:46:14.06 Server Database mirroring has been enabled on this instance of SQL Server.
2007-03-18 19:46:14.07 spid5s Starting up database 'master'.
2007-03-18 19:46:14.15 spid5s 1 transactions rolled forward in database 'master' (1). This is an informational message only. No user action is required.
2007-03-18 19:46:14.17 spid5s 0 transactions rolled back in database 'master' (1). This is an informational message only. No user action is required.
2007-03-18 19:46:14.17 spid5s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2007-03-18 19:46:14.37 spid5s SQL Trace ID 1 was started by login "sa".
2007-03-18 19:46:14.42 spid5s Starting up database 'mssqlsystemresource'.
2007-03-18 19:46:14.50 spid5s The resource database build version is 9.00.3042. This is an informational message only. No user action is required.
2007-03-18 19:46:14.89 spid5s Server name is 'YODA'. This is an informational message only. No user action is required.
2007-03-18 19:46:14.89 spid9s Starting up database 'model'.
2007-03-18 19:46:15.06 spid9s Clearing tempdb database.
2007-03-18 19:46:15.67 spid9s Starting up database 'tempdb'.
2007-03-18 19:46:15.79 spid12s The Service Broker protocol transport is disabled or not configured.
2007-03-18 19:46:15.79 spid12s The Database Mirroring protocol transport is disabled or not configured.
2007-03-18 19:46:15.82 spid12s Service Broker manager has started.
2007-03-18 19:46:21.62 Server The server could not load the certificate it needs to initiate an SSL connection. It returned the following error: 0x8009030d. Check certificates to make sure they are valid.
2007-03-18 19:46:21.62 Server Error: 17190, Severity: 16, State: 1.
2007-03-18 19:46:21.62 Server FallBack certificate initialization failed with error code: 1.
2007-03-18 19:46:21.62 Server Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2007-03-18 19:46:21.64 Server Error: 17182, Severity: 16, State: 1.
2007-03-18 19:46:21.64 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x80.
2007-03-18 19:46:21.64 Server Error: 17182, Severity: 16, State: 1.
2007-03-18 19:46:21.64 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x1.
2007-03-18 19:46:21.64 Server Error: 17826, Severity: 18, State: 3.
2007-03-18 19:46:21.64 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2007-03-18 19:46:21.64 Server Error: 17120, Severity: 16, State: 1.
2007-03-18 19:46:21.64 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
Any advice???
I get this problem when tryoing to connect to the surface area configuration for services & connections
As well as for features.
However I can connect via another computer and change the options accordingly but I just can't do it locally from the server ?
Does any one know why please, the links in the message don't help ?
===================================
An exception occurred in SMO while trying to manage a service. (Microsoft.SqlServer.Smo)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.InnerWmiException&LinkId=20476
------------------------------
Program Location:
at Microsoft.SqlServer.Management.Smo.Wmi.WMIProxy.ExecProcess(Object request)
at Microsoft.SqlServer.Management.Smo.Wmi.WMIProxy.ProcessRequest(Request req)
at Microsoft.SqlServer.Management.Smo.Wmi.WmiSmoObject.EnumChildren(String childTypeName, WmiCollectionBase coll)
at Microsoft.SqlServer.Management.Smo.Wmi.ServiceCollection.InitializeChildCollection()
at Microsoft.SqlServer.Management.Smo.Wmi.ServiceCollection.get_Count()
at Microsoft.SqlSac.MainPanel.FormFeatures..ctor(String machineName, Form callingForm)
===================================
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
Program Location:
at Microsoft.SqlServer.Management.Smo.Enumerator.Process(Object connectionInfo, Request request)
at Microsoft.SqlServer.Management.Smo.Wmi.WMIProxy.ExecProcess(Object request)
===================================
------------------------------
Program Location:
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()
at Microsoft.SqlServer.Management.Smo.Wmi.WmiBase.BuildDataTable(ManagementObjectCollection listManagementObject)
at Microsoft.SqlServer.Management.Smo.Wmi.WmiBase.BuildResult(ManagementObjectCollection listManagementObject)
at Microsoft.SqlServer.Management.Smo.Wmi.WmiBase.GetData(EnumResult erParent)
at Microsoft.SqlServer.Management.Smo.Environment.GetData()
at Microsoft.SqlServer.Management.Smo.Environment.GetData(Request req, Object ci)
at Microsoft.SqlServer.Management.Smo.Enumerator.GetData(Object connectionInfo, Request request)
at Microsoft.SqlServer.Management.Smo.Enumerator.Process(Object connectionInfo, Request request)
Hmm A tad strange.
When trying to open the sharepoint webpage I'm getting this error - cannot connect to the configuration database sharepoint 2010.Database is on SQL server 2008.Tried opening the site on server - got the same error.Googled and tried to start the mssqlserver services (browser and sql server) but they fail to start with error code 17058.
Googled what this error was about and some solutions led me to check the error log in event viewer. For mssqlserver I got following message in the event proverties window -Â Could not open error log file <path of log file> ''. Operating system error = 5 (access denied).When I tried to login on the sql server management studio, it does not let me login and gives error -Â
I got to know that this can happen due to unexpected reboot of server. I checked my server and it had actually restarted unexpectedly.URL...
I was trying to get some indexing recommendations from the Database Engine Tuning Advisor by consuming a trace file with known indexing issues. After several minutes all it did was create a report or two which list existing indexes. Not very useful. I must be doing something wrong.
A message displays that "75% of the consumed workload has syntax errors." I guess it can't take a regular trace (.trc) file?
I am conderned that the trace file I used did not contain what the Advisor needs. Do I need to setup the trace a special way to support the Advisor?
Also, what does "Database for workload analysis" mean? I chose tempdb but there is no Help, and BOL is a maze of small uninformative snippets . . .
Thanks,
Michael
I am running SQL 7.0 with Access 97 as a front end. I am having a problem linking one of the tables with an odbc connection. When I try to link the table, it gives me the error :
"The database engine can't find <name of table>. Make sure it is a valid parameter or alias name, that it doesn't include invalid characters or punctuation, and that the name isn't too long."
I have tried renaming the table, and it then will allow the connection, but if I rename it back to the original name, it doesn't work again. The table name is "Invoice_Line_Item". Changing the name permanently is not an option.
Has anyone else run across this problem, or know of a fix for it.
Wanted to do the forecasting of disk growth for one year. How to find the database growth rate?
View 4 Replies View Related
We have the need to determine surrounding counties of a particular county.
For example how can I determine, if I entered a zip code for Contra Costa and the property is also right on the line of alameda that Alameda is a neighboring county of Contra Costa
Could it be determined by the longitude and latitude of the zip code in comparison with the counties?
surface some data stored in an Access database via SQL Server, ultimately to be consumed by SharePoint. Â
I understand how to push existing tables to SQL Server as new tables. Â In my case, what I am hoping to do is to link an Access query with a table in SQL Server, and have that table be updated each time the query is run (or even each time the database is updated). Â
Say I inherit from an undocumented installation of SQL server. Is there a way to extract all features, configurations and such to apply them on a different installation?For instance, if the setup was executed multiple times, can I generate a configuration.ini file contains the culmination of every setup executed?
View 3 Replies View RelatedHello my friends!
I have designed a database on a SQLServer Express. When I am going to backup it, I provide a filename like as "c:/test.bak" but when executing I recieve a message that SQLServer cannot open the backup device with the name above.
Hi,
I would be very grateful if someone could help me. I have very little SQL knowledge and would like a push in the right direction:
I have a application that receives GPS lattitude and longitude values. I was originally using file base system where I would load all the points from the file into memory and do the calculations in the software but I now would like to use SQL Server Express.
I have created the tables:
[Table 1] GPS Points:
id int Primary key
latitude real
longitude real
desc nvarchar(128)
[Table 2] GPS Locations (comprises of one or more GPS Points from [1] above) to form a boundary:
GPS Locations database structure is:
locationId int primary key
gpspoint1 int
gpspoint2 int
gpspoint3 int
gpspoint4 int
desc nvarchar(128)
Table 2 contains up to 4 gps points ids from table 1 and GpsPoints1-4 can be null.
I have created the tables and I have inserted GPS values into both tables.
My problem:
I am trying to compare the current Lat/Lon (which are passed into the SQL fuction as two real datatype value) and I want to return all Table 2 locationId's where the current Lat/Lon are withing GPSPoints1-4 area.
gpspoint1, gpspoint2, gpspoint3, gpspoint4 reference an id from Table 1. I am not sure how I can do this?
I have implemetned a SQL function that returns all points from Table 1 that are within the predefined radius of 1.5 miles from the current Lat/Lon values passed in.
select desc,latitude,longitude, acos(SIN( PI()* @LatDec /180 )*SIN( PI()*latitude/180 )
)+(cos(PI()* @LatDec /180)*COS( PI()*latitude/180) *COS(PI()*longitude/180-PI()* @LonDec /180)
)* 3963.191 AS distance
FROM GpsPoints
WHERE 1=1
AND 3963.191 * ACOS( (SIN(PI()* @LatDec /180)*SIN(PI() * latitude/180)) +
(COS(PI()* @LatDec /180)*cos(PI()*latitude/180)*COS(PI() * longitude/180-PI()* @LonDec /180))
) < = Radius
ORDER BY 3963.191 * ACOS(
(SIN(PI()* @LatDec /180)*SIN(PI()*latitude/180)) +
(COS(PI()* @LatDec /180)*cos(PI()*latitude/180)*COS(PI() * longitude/180-PI()* @LonDec /180))
)
where 3963.191 is earths radius in miles,
radius is 1.5,
@LatDec is the current latitude and
@LonDec is the current longitude
Uses a lot of Trig and (for me) is quite complicated. This works very well and is very accurate. It also only uses a single table. I want to be able to now look for the current position within a boundary of 3 or more positions from Table 1 and this is where I am struggling?
Also, any suggestions on how I could do this better would be very much appreciated?
I look forward to your reply and help.
Thank you in advanced.
Hi All,
Can somebody please help me, how to create database link to Oracle from MsSqlServer200.
Ex:
If I want to view data in both databases at a time then query would be like the following:
dblink name : SqltoOraclelink
table Name : EMP (this could be available in both the databases)
query in MsSqlServer200 EnterpriseManger:
select empname, empno from EMP msemp, emp@SqltoOracle oraemp where msemp.empname = oraemp.empname
Then this query results the rows from both the databases where empname is same in both the tables
My question is: How can I create this Database link "SqltoOraclelink" as I can do the same thing in Oracle.
As this is in urgency, it would be greate if somebody help us asap.
Thanks in Anticipation,
Regards,
RK
I have a SQL server with multiple instances on it and would like to move one of them to a drive with more storage. Â
I have SQL 2010 on a server with 2 partitions.
The database is located on the C: drive (original build) but the drive isn't partitioned to handle a db of the size that this one will grow to. I would like to move the full DB instance to another partition.
hi experts,
acutually i had configured the online application in my local pc..when i try to configure the database , it seems to be a vc++ intellisense database file(.ncb extension)..Actually i am working on ms sqlserver..i don't know how to open the vc++ database in mssqlserver...pls help me..
regards
senthil.d
Is there a way to find out who enabled or disabled a SQL server agent job?
View 3 Replies View Related