Initial Load Of Report. Wait For And Trap View Report Button
Oct 25, 2007
I have some date criterias on my report that default and so I would like for the report not to display until the user clicks on the "view report" button.
Also, I would like to trap that button to send my own internal parameters to the report. How and where would I do that.
I'm running the report through report viewer and I have a subroutine that would refresh the report with my desired internal parameters. I just need to hook it up.
I've got a SQL Reporting Server 2000 SP2 report that takes 3 parameters. FromDT, ToDT, and LocationCD. The first two parameters are free form text fields that expect a date. The last one is a drop down box. For some reason, when I'm viewing the report through the standard reports folder on the report server I have to click the "View Report" button two times to get the report to render. Clicking it just once, doesn't seem to do anything. The report is a line graph.
There are default values in the FromDT and ToDT parameter fields.
Anyone have any ideas what would be causing the need for the second click?
Each day, the first user who launches our RS reports always gets a long wait time. Subsequent report launches are normal. Does anyone know what is going on? If yes, what is the remedy?
I provide default values for parameters, but we need to wait for the user to click "View Report" before the report is run. It is an expensive report to run, and the user needs the defaults, but also needs to be able to change them before execution. I cannot find a setting for this. Is there a way to do this that does not involve adding dummy parameters? (that's too tacky a solution!)
The "View Report" button is relatively positioned so when the report content is wider than the screen size, it pushes it to the right such that the users have to scrool right to click on it again. Is there a way of setting the "View Report" button to a fixed position to eliminate this?
Has anyone encounted a problem with Reporting Services (2005) with the following scenario: A report with a dropdown parameter allowing a Select All choice -
If the selection list is fairly long and Select All is selected - if the user clicks the View Report button the selection list is completely reset (i.e. all items are unselected). This seems to happen if the user quickly clicks the View Report button immediately after clicking the Select All box on the parameter dropdown.
This happens inconsistently - some users experience it frequently while others do not see it at all (using the same parameter values, etc.)
I have several reports in a Power View Gallery. In Gallery view, most of the reports show the "Open New Excel Workbook", the "Create Power View Report", and the "Manage Data Refresh" buttons on the right side of the report list. Why would some reports not have these buttons available? In the attached image you can see one report with the buttons and one without the buttons.
It appears to work fine on my end however on my clients end, whenever they try to print a report that displays perfectly within the report viewer to their printer by selecting the printer button in the report it never ends up printing.., however if they go into printer setup and change the page range to print from all pages to just maybe one page and then select the print button it seems to print fine..
The printer seems to receive the information as the light flashes but no page kick out when all pages is selected to print..
I am having a hard time finding the report path for the web report Viewer in visual studio 2005. I have tried entering the absoute path to the folder containing the reports. this gave the error that the path is invalid. I have also tried reletive paths using / and // in the front of the name for each report. these all fail. could someone please assist with finding the path to the reports? the reports reside on another server away from the one being used for development of the web site.
Hi, In a .net application there is a link that brings up a SSRS report. I have noticed that if it is the first time this report is requested i.e. Application has just been opened and the report button is clicked, then it takes a while to get this report to appear on the screen. But if this report is requested again (i.e. for the second time or more) then it only takes a few moments for the report to appear on the screen. So it seems that only the first time the report is requested it takes a longer time to get this report. Is there a way to reduce this initial load of the report? Thanks
I added a page to exsisting web site. Then I used report viewer to show a report. But when I try to view it in the browser, I get the following error message.
Server Error in '/Website' Application.
The type CustomReportServerConnection, APP_CODE does not implement IReportServerConnection or could not be found Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Microsoft.Reporting.WebForms.InvalidConfigFileTypeException: The type CustomReportServerConnection, APP_CODE does not implement IReportServerConnection or could not be found
Source Error:
Line 272: <asp:View ID="vwWARRatingChangeReport" runat="server"> Line 273: <aspanel ID="pnlWARRatingChangeReport" runat="server" Width="683px"> Line 274: <rsweb:ReportViewer ID="rvWARRatingChageReport" runat="server" Font-Names="Verdana" Font-Size="8pt" Line 275: Height="100%" ProcessingMode="Remote" Width="100%"> Line 276: <ServerReport ReportPath="/CRMReportsQA/ORA/WARRatingsChange" ReportServerUrl="http://wiismab00035038:8095/Reportserver" />
But I created another website using visaul studio in my local machine and then used report viewer to disaply the same report. Its in server mode same as earlier. This one can be viewed without any trouble.
I'm not familiar with ASP.NET thing. Can anyone help me to resolve this one?
I would like to know whether there is any way to add a button in report. I have 3 report parameters. On clicking the button, the current values of the reports are to be obtained and saved in database i.e saving the report configuration. I will use this saved configuration to form the url and view report directly.
I want to add a link in a report, possibly a url link or a link to other report. One way of doing this is to go to properties of textbox and then update the jump to option.
But how to do this through a click of a button, inside the report?
I am having Microsoft Visual Studio 2005, designer's version.
We've installed SQLServer 2005 and are trying to use Report Builder. But we only see the Report Builder button if we're currently logged onto the machine that's running RS.
My understanding is that anybody with a role of Content Manager should be able to see this, but nothing we do with the role assignments seems to help.
We've installed on XP and Win2003 machines and this behavior is consistent.
I have installed SQL Server Express 2008 R2 Express version and have created various tables and stored procedures. I start Reporting Services Configuration Manager, connect to my report server instance, click on Report Manager URL and get my SQL Server Reporting Services Home page. I have the “New folder, New Data Source, Folder and Upload buttons, but I do not have a Report Builder button.
several months ago I briefly set up a data source, tested it and created a very simple report.
I now have an chance to get back into it and when I am at the SSRS Home page and click the button to start "Report Builder I get the yellow bar at the bottom of the page like I'm trying to open a file. It says: "Do you Want to open or save ReportBuilder_3_0_0_0_0.appliation(15.2 KB) from caholoweckyw7" and then the Open, Save and Cancel buttons. If I click open, the actual XML code behind the page appears and the application does not start. ?
The data source has been created and the connection has been tested successfully. I am running SQL Server 2012 and Windows 7 and IE 9.
I am trying to use the report wizard and I get to the last screen where it asks for a name for the report file. The 'Next' button is not unprotected although the 'Finish' button is.
As far as I can tell I have setup the Matrix style report up correctly. If I use the 'Finish' button, Visual Studio just crashes.
The help does not give any clue and I have not found any answers in the forum.
I've read posts that state it is impossible to remove the "Show Details" button on the tool bar in Report Manager.
I created a new role assignment for an individual on a folder with the "Browse" role only.
When that individual navigates to the folder and clicks the "Show Details" button, the "Delete" and "Move" buttons also appear on the tool bar, with a checkbox next to each report item.
I can't have a folder where my users have the ability to delete or move my published reports!
Am I missing a setting? Again, the user has the "Browse" role only on the folder.
Hi, We are using ReportViewer control to show SSRS 2005 Reports in a Windows Form. Now, in some Reports the close button is not working. Even user clicks on the Close button in the right top corner of the Report Viewer the Report cannot be closed. Please help me to understand and resolve this problem.
When I preview a report that has a link to a details report page in VS a "Back to Parent Report" button is displayed. However, when I publish the report to the Report Server, the .aspx page doesnt display the "Back to Parent Report" button. Is there a setting I need to make to have the button displayed?
I am having a problem with Print button not showing up. I tried everything but I can get it to show itself on the toolbar. I am using reporting viewer on local report on the web page. I published my local report on the server but still not showing. If anybody knows how to fix this problem please help.
I am also tring to insert a report parameter in the header section of the report but when I get to parameters section it tells me that "This report does not contain any parameteres".
When I drill down from one report to another and then depress the back button to return to the initial report, the message 'Generating Report" spins forever without actually running. However, if I depress the regenerate button during this time, it will run the report.
I believe that I may have inadvertingly reset a field attribute to have caused this condition. Ironocally, I have the same set of database installed on another server, and the this does not happen.
I forgot to mention that I am using Report Manager to deploy the reports.
When I drill down from one report to another and then depress the back button to return to the initial report, the message 'Generating Report" spins forever without actually running. However, if I depress the regenerate button during this time, it will run the report.
I believe that I may have inadvertingly reset a field attribute to have caused this condition. Ironocally, I have the same set of database installed on another server, and the this does not happen.
I forgot to mention that I am using Report Manager to deploy the reports.
Hello, I've created a Report Model Project that can be used by Report Builder to generate ad-hoc reports. I'm trying to create a connection string in my Report Server Project that points to the Report Model Project data source view.
All I can do is create a regular datasource, which bypasses the metadata contained in the Data Source View.
Basically I want my Report Server Project and my Report Builder reports to leverage the same metadata. Is this possible? If so how do I get the connection string?
Hi, this is my first post here. I hope to be helpful trying to help and not only asking questions arround here. After I have my report ready I will share here the total experience from top to bottom!But for now, here's the issue:
I'm building a RDLC Repor on my ASP.Net VB web application. I added the .rdlc file to the application and created a table to show lines of data binded from a dataset. The thing is:
- The DataSet expects a parameter @intNumber, a identifier to get the correct data to display the correct report.
- I'm using ReportViewer to view the report, and by code I've passed a Report Parameter to the *.RDLC report with success, just like this:
Dim parms(0) As ReportParameter parms(0) = New ReportParameter("intNumber", 37) ReportViewer1.LocalReport.SetParameters(parms)
The present issue is the following: I want to use that parameter sent to the report to be sent to the query of the DataSet as parameter to the query to return the data to fill the report. I've heard that this is not possible, just with report server...
Another issue is the print button, also heard that only can appear on report server...no way to display and work on RDLC reports?Very confused right now...these issues are stupid, MS tools should allow these operations, which are not efficient if this is not possibla on RDLC...
I am using SSRS 2005 for reporting. I am not able to see the "New Data-driven Subscription" button in Report Manager. But I am able to see "New Subscription".
This is a really strange problem. There are some reports that work fine when I click the print button provided by the Report Manager but trying to print the report by clicking on print button located by the export causes my computer to reboot. Is there a resolution?
The report can be successfully printed if exported to pdf.
I have created web based ssrs report with Report viewer and I am trying to add Command button to print result of report reside in ReportViewer and I have worked with code to generate. Is there any other way to work around without writing function or java script on Extra print button to print ssrs report.
using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.Web.UI; using System.Web.UI.WebControls;
