Insert Single Row / Multiple Rows Into Multiple Tables
Sep 3, 2014How to insert single row/multiple rows into multiple tables by using single insert statement.
View 1 Replies
ADVERTISEMENT
Inserting Multiple Rows With A Single INSERT INTO
Jul 23, 2005Hi,I have an application running on a wireless device and being wireless Iwant it to use bandwidth as efficiently as possible. Therefore, I wantthe SQL statement that it uploads to the SQL Server to be as efficientas possible. In one instance, I give it four records to upload, whichcurrently I have as four seperate SQL statements seperated by a ";".However, all the INSERT INTO... information is the same each time, theonly that changes is the VALUES portion of each command. Also, I haveto have the name of each column to receive the data (believe it or not,these columns are only a small subset of the columns in the table).Here is my current SQL statement:INSERT INTO tblInvTransLog ( intType, strScreen, strMachine, strUser,dteDate, intSteelRecID, intReleaseReceiptID, strReleaseNo, intQty,dblDiameter, strGrade, HeatID, strHeatNum, strHeatCode, lngfkCompanyID)VALUES (1, 'Raw Material Receiving', '[MachineNo]', '[CurrentUser]','3/21/2005', 888, 779, '2', 5, 0.016, '1018', 18, '610T142', 'K8',520);INSERT INTO tblInvTransLog ( intType, strScreen, strMachine, strUser,dteDate, intSteelRecID, intReleaseReceiptID, strReleaseNo, intQty,dblDiameter, strGrade, HeatID, strHeatNum, strHeatCode, lngfkCompanyID)VALUES (1, 'Raw Material Receiving', '[MachineNo]', '[CurrentUser]','3/21/2005', 888, 779, '2', 9, 0.016, '1018', 30, '14841', 'B9', 344);Since the SQL statement INSERT INTO portion remains the same everytime, it would be good if I could have the INSERT INTO portion onlyonce and then any number of VALUES sections, something like this:INSERT INTO tblInvTransLog (intType, strScreen, strMachine, strUser,dteDate, intSteelRecID, intReleaseReceiptID, strReleaseNo, intQty,dblDiameter, strGrade, HeatID, strHeatNum, strHeatCode, lngfkCompanyID)VALUES (1, 'Raw Material Receiving', '[MachineNo]','[CurrentUser]', '3/21/2005', 888, 779, '2', 5, 0.016, '1018', 18,'610T142', 'K8', 520)VALUES (1, 'Raw Material Receiving', '[MachineNo]','[CurrentUser]', '3/21/2005', 888, 779, '2', 9, 0.016, '1018', 30,'14841', 'B9', 344);But this is not a valid SQL statement. But perhaps someone with a morecomprehensive knowledge of SQL knows of way. Maybe there is a way tostore a string at the header of the command then use the string name ineach seperate command(??)
View 2 Replies View RelatedGenerate Multiple Rows For Insert From Single Row
Jan 15, 2007Dear all,
I have a package in which, when a Cost Center has X as a value, I must insert not X but many different Y value, which are associated with X. How can I gather and treat those Y values? Only using a Script Component?
Regards,
Pedro Martins
SQL 2000 How To Insert Multiple Rows Ina Single Table
Oct 25, 2007
I am using SQL 2000
I am getting a syntax error when I parse this sql script:
insert into Elec_Sub_Test1
values ('10-20-2007',35),
('10-21-2007',24)
What is the correct syntax to insert mutlipe rows in a single table.
Copying Rows From Multiple Tables To A Single Table
Sep 20, 2007
Hi,
I have 3 tables with the follwing schema
Table <Category>
{
UniqueID,
LastDate DateTime
}
Assume the follwing tables with data following the above schema
Table Cat1
{
1, D1
2, D2
3, D3
}
Table Cat2
{
2, D4
3,D5
4, D6
}
Table Cat3
{
1, D7
3,D8
5,D9
}
I have a Master and the schema is as follows
Table master
{
UniqueId,
Cat1 DateTime, -- This is same as the Table name
Cat2 DateTime, -- This is same as the Table name
Cat3 DateTime -- This is same as the Table name
}
After inserting the data from all these 3 tables, I want the my master table to look like this
Table Master
{
UniqueId cat1 cat2 Cat3
------------ --------- ------- -----------
1 D1 NULL D7
2 D2 D4 NULL
3 D3 D5 D8
4 NULL D6 NULL
5 NULL NULL D9
}
Please remember the column names will be same as that of table names
can any one pelase let me know the query t o acheive this
Thanks for your quick response
~Mohan Babu
How To Merge Multiple Rows One Column Data Into A Single Row With Multiple Columns
Mar 3, 2008
Please can anyone help me for the following?
I want to merge multiple rows (eg. 3rows) into a single row with multip columns.
for eg:
data
Date Shift Reading
01-MAR-08 1 879.880
01-MAR-08 2 854.858
01-MAR-08 3 833.836
02-MAR-08 1 809.810
02-MAR-08 2 785.784
02-MAR-08 3 761.760
i want output for the above as:
Date Shift1 Shift2 Shift3
01-MAR-08 879.880 854.858 833.836
02-MAR-08 809.810 785.784 761.760
Please help me.
Transact SQL :: Query To Convert Single Row Multiple Columns To Multiple Rows
Apr 21, 2015I have a table with single row like below
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Column0 | Column1 | Column2 | Column3 | Column4|
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Value0 | Value1 | Value2 | Value3 | Value4 |
Am looking for a query to convert above table data to multiple rows having column name and its value in each row as shown below
_ _ _ _ _ _ _ _
Column0 | Value0
_ _ _ _ _ _ _ _
Column1 | Value1
_ _ _ _ _ _ _ _
Column2 | Value2
_ _ _ _ _ _ _ _
Column3 | Value3
_ _ _ _ _ _ _ _
Column4 | Value4
_ _ _ _ _ _ _ _
SQL Server 2012 :: Insert Multiple Rows In A Table With A Single Select Statement?
Feb 12, 2014I have created a trigger that is set off every time a new item has been added to TableA.The trigger then inserts 4 rows into TableB that contains two columns (item, task type).
Each row will have the same item, but with a different task type.ie.
TableA.item, 'Planning'
TableA.item, 'Design'
TableA.item, 'Program'
TableA.item, 'Production'
How can I do this with tSQL using a single select statement?
SQLCE V3.5: Single SDF With Multiple Tables Or Multiple SDFs With Fewer Tables
Mar 21, 2008Hi! I have a general SQL CE v3.5 design question related to table/file layout. I have an system that has multiple tables that fall into categories of data access. The 3 categories of data access are:
1 is for configuration-related data. There is one application that will read/write to the data, and a second application that will read the data on startup.
1 is for high-performance temporal storage of data. The data objects are all the same type, but they are our own custom object and not just simple types.
1 is for logging where the data will be permanent - unless the configured size/recycling settings cause a resize or cleanup. There will be one application writing alot [potentially] of data depending on log settings, and another application searching/reading sections of data.
When working with data and designing the layout, I like to approach things from a data-centric mindset, because this seems to result in a better performing system. That said, I am thinking about using 3 individual SDF files for the above data access scenarios - as opposed to a single SDF with multiple tables. I'm thinking this would provide better performance in SQL CE because the query engine will not have alot of different types of queries going against the same database file. For instance, the temporal storage is basically reading/writing/deleting various amounts of data. And, this is different from the logging, where the log can grow pretty large - definitely bigger than the default 128 MB. So, it seems logical to manage them separately.
I would greatly appreciate any suggestions from the SQL CE experts with regard to my approach. If there are any tips/tricks with respect to different data access scenarios - taking into account performance, type of data access, etc. - I would love to take a look at that.
Thanks in advance for any help/suggestions,
Bob
INSERT INTO Multiple Tables Rows
Jul 5, 2005Can i insert values into multiple tables? Usually we using this
INSERT INTO Customers (CustomerID) VALUES ('ABC')
But i want to combine both into one statement
INSERT INTO Customers (CustomerID) VALUES ('ABC')
INSERT INTO Orders (OrderID) VALUES ('DEF')
Transact SQL :: Converting From Multiple Rows With Single Values To Single Rows With Multiple Values
May 10, 2015Here is some data that will explain what I want to do:
Input Data:
Part ColorCode
A100 123
A100 456
A100 789
B100 456
C100 123
C100 456
Output Data:
Part ColorCode
A100 123;456;789
B100 456
C100 123;456
Help With Query - Insert Multiple Rows And Link Between Tables.
Feb 27, 2007I am trying to do the following:
Insert n rows into A Table called EAItems. For each row that is inserted into EAItems I need to take that ItemID(PK) and insert a row into EAPackageItems.
I'm inserting rows from a Table called EATemplateItems.
So far I have something like this: (I have the PackageID already at the start of the query).
INSERT INTO EAItems(Description, Recommendation, HeadingID)SELECT Description, Recommendation, HeadingIDFROM EATemplateItems WHERE EATemplateItems.TemplateID = @TemplateID INSERT INTO EAPackageItems(ItemID, PackageID) ....
I have no idea how to grab each ITemID as it's created, and then put it into the EAPackageItems right away.
Any Advice / help would rock! Thanks
Insert Multiple Rows To Table Based On Values From Other 2 Tables.
Nov 21, 2007I have a form to assign JOB SITES to previously created PROJECT. The JOB SITES appear in the DataList as it varies based on customer. It can be 3 to 50 JOB SITES per PROJECT.
I have "PROJECT" table with all necessary fields for project information and "JOBSITES" table for job sites. I also created a new table called "PROJECTSITES" which has only 2 columns: "ProjectId" and "SiteId".
What I am trying to do is to insert multiple rows into that "PROJECTSITES" table based on which checkbox was checked. The checkbox is located next to each site and I want to be able to select only the ones I need. Btw the Datalist is located inside of a formview and has it's own datasource which already distincts which JOBSITES to display.
Sample:
ProjectId - SiteId
1 - 5
1 - 9
1 - 16
1 - 18
1 - 20
1 - 27
1 - 31
ProjectId stays the same, only values for SiteId are being different.
I hope I explaining it right. Do I have to use some sort of loop to go through the automatically populated DataList records and how do I make a multiple inserts to database table? We use SQL Server 2005 and VB for code behind. Please ask if I missed on some information. Thank you in advance.
Multiple Insert Into Multiple Tables With A Stored Procedure
Mar 1, 2007Hello
I am building a survey application.
I have 8 questions.
Textbox - Call reference
Dropdownmenu - choose Support method
Radio button lists - Customer satisfaction questions 1-5
Multiline textbox - other comments.
I want to insert textbox, dropdown menu into a db table, then insert each question score into a score column with each question having an ID.
I envisage to do this I will need an insert query for the textbox and dropdownlist and then an insert for each question based on ID and score.
Please help me!
Thanks
Andrew
Bulk Insert Multiple Files To Multiple Tables - How?
Feb 15, 2008I need to be able to bulk insert a bunch of tables from their corresponding flat file. I have created an XML file (see below) which has the file name/table name pair at each node. I then created a ForEachLoop task and used the Node enumeration type and the following OuterXpathString: ReferenceFiles/File. At this point I get lost. How do I pass the 2 inside node values (file name and table name) to variables which I can then use as expressions for the bulk insert task inside the Foreach?
Here is XML file:
Code Snippet
<ReferenceFiles>
<File>
<FileName>Ref_Categories.txt</FileName>
<TableName>Ref_Categories</TableName>
</File>
<File>
<FileName>Ref_Configs.txt</FileName>
<TableName>Ref_Configs</TableName>
</File>
</ReferenceFiles>
Thanks.
Multiple Rows To Multiple Tables
May 4, 2001Hi, Gurus,
I am trying to populate a table with repeating groups in multiple columns by using information from two other tables. The sample tables and records are like:
Table A
CSID
1
2
3
4
Table B
CP_IDCO_CODE
12C1
12C2
12C3
12C4
13C5
13C6
13C7
13C8
14C9
14C10
14C11
14C12
Table C (The empty table I want to populate like the following)
CSID CP_ID_1 CO_CODE_1 CP_ID_2 CO_CODE_2 CP_ID_3 CO_CODE_3
112C1 13 C514 C9
212C2 13 C614 C10
312C3 13 C714 C11
412C4 13 C814 C12
What is the best way to do it? Thanks in advance.
Sam
Single Row Into Multiple Rows
May 8, 2008Hi All,
We've a table as in the following format:
PK_Column1
PK_Column2
Issue_Date1
Issue_Amount1
Issue_Category1
Issue_Reject1
Issue_Date2
Issue_Amount2
Issue_Category2
Issue_Reject2
We need to divide it into two new tables as follows:
UniqueID
PK_Column1
PK_Column2
And
UniqueID
PK_Column1
PK_Column2
Sequence_ID
Issue_Date
Issue_Amount
Issue_Category
Issue_Reject
Unique1
1
Issue_Date1
Issue_Amount1
Issue_Category1
Issue_Reject1
Unique2
2
Issue_Date2
Issue_Amount2
Issue_Category2
Unique3
1
xx
xx
Unique4
2
xx
xx
Unique5
3
xx
4
xx
There will be one UniqueID for each row.
We'll get the uniqueID and PK1 and PK2 in a file.
Imp: We need to generate the Sequence_Id depending on number of Issue_dates or Issue_amounts or Issue_Categories or Issue_Rejects as in the above table.
Can we do this without using cursors?
This is going to be one time process.
Any ideas are appreciated.
Thanks,
Siva.
Getting Multiple Rows In A Single Row
Jan 21, 2008Hi,
I've a temp variable where I'm moving some columns like below:
id
value
type1
type2
0
ab
type1val1
type2val1
0
cd
type1val1
type2val1
0
ef
type1val1
type2val1
1
ab
type1val2
type2val2
1
cd
type1val2
type2val2
1
ef
type1val2
type2val2
What I want to do is group these by their id and get the following o/p
ab,cd,ef type1val1 type2val1
ab,cd,ef type1val2 type2val2
The grouped values need to be separated by commas.
What I'm doing currently:
I'm using a temp variable to put all these values but am unable to coalesce and get the desired o/p.
Can anybody help me out?
Thanks,
Subha
Spliting Single Row Into Multiple Rows
Sep 20, 2006I have a table that contains many columns in a single row and I'd like to split the table so that it has fewer column values and more rows.
My table structure is:
create table #scoresheet
(Decisions varchar(10), DNumericalValue int, DVI varchar(10), DComments nvarchar(255),
Competence varchar(10), CNumericalValue int, CVI varchar(10), CComments nvarchar(255),
Equipment varchar(10), ENumericalValue int, EVI varchar(10), EComments nvarchar(255));
I would like to have three rows with four columns.
What I've done so far is create a stored procedure that uses a table variable:
create procedure sp_splitsinglerow as
declare @Scoresheet_rows_table_var table (
ReviewArea varchar(25),
NumericalValue int,
VI varchar(10),
Comments nvarchar(255));
insert into @Scoresheet_rows_table_var
(ReviewArea, NumericalValue, VI, Comments)
select Decisions, DNumericalValue, DVI, DComments
from #scoresheet
The trouble with this approach is that I have to explicitly name the columns that I insert into the table variable. What I'd really like to be able to is have a loop construct and select the first 4 columns the first time, the second 4 the next time and the last 4 the third time.
Any ideas on how to achieve that?
BTW, I have resolved this issue by suggesting to the Developers that they change the structure of the original table, but I'd still like to know if there is another solution. :)
Split Single Row To Multiple Rows
Feb 27, 2012I have a table which looks like
Low High
-------------------------
cx01 cx04
sn05 sn08
I need output like
Result
-------------
cx01
cx02
cx03
cx04
sn05
sn06
sn07
sn08
How to get this output using sql query?
T-SQL (SS2K8) :: Multiple Rows Into A Single Row
Nov 7, 2014I am working with some old code that we are trying to clean up and perform some performance enhancements. The performance is now, so Very much better. From over 3 minutes to under 2 seconds.
But I am still trying to get the multiple rows into a single row. I would like to place this into a CTE to get the multiples into a single row. I just cannot get my head around how is the best, most efficient way to write the query.
This is a small example of what the rows look like in the resultset, and what I want to single to be.
DECLARE @BillingCorrect TABLE
(
ContractNumber char(10)
, pc1 int
, pb int
, om int
, vp int
[Code] ....
I am not sure how to write the query to have all the data in a single row.
Return Multiple Rows As A Single Row
Oct 8, 2014I’m trying to return data in a single row.Here’s what my table looks like:
Employee #,Hours Type,Total Hours
1234,Regular,40
1234,OT,8
1234,Regular,36
[code]....
I need the results of my query to total each hours type and group together:
EmpNo,Sum Of Regular, Sum of Overtime,Sum of Doubletime
1234,76,19,12
7777,45,8,5
I don’t know how to get the data returned in a single row.
Multiple Rows Into A Single Field
Oct 12, 2005Hi
I have aproble with stored procedure.I want to take the Data from a table with multiple rows,In the same select statement for the others select statemet.My store Proc is like this..
CREATE procedure spr_Load_TR_AccidentReport_Edit_VOwner
(
@Crime_No varchar(20),
@Unit_ID int
)
as
begin
DECLARE @AD_Driver int,@AC_Cas int,@AV_Owner int,@A_Witness int
DECLARE @Defect_ID varchar(100)
select @AV_Owner=Vehicle_Owner from TBL_TR_ACCIDENT_VEHICLE where Crime_No =@Crime_No and Unit_ID = @Unit_ID
SELECT
TBL_TR_Person_Details.Person_ID,TBL_TR_Person_Details.Person_Name, dbo.TBL_TR_Person_Details.Address1,
dbo.TBL_TR_Person_Details.Address2, dbo.TBL_TR_Person_Details.City_Id, dbo.TBL_TR_Person_Details.State_Id,
dbo.TBL_TR_Person_Details.Nationality_id, dbo.TBL_TR_Person_Details.EMail, dbo.TBL_TR_Person_Details.Phone,
dbo.TBL_TR_Person_Details.zip, dbo.TBL_TR_Person_Details.sex, dbo.TBL_TR_Person_Details.D_O_B, dbo.TBL_TR_Person_Details.Age,
dbo.TBL_TR_Person_Details.Occupation_ID, dbo.TBL_TR_Person_Details.Person_Type,
TBL_TR_ACCIDENT_VEHICLE.Registration_Number,
TBL_TR_ACCIDENT_VEHICLE.Crime_No,
TBL_TR_ACCIDENT_VEHICLE.Vehicle_Owner,
TBL_TR_ACCIDENT_VEHICLE.Vehicle_Type,
TBL_TR_ACCIDENT_VEHICLE.Vehicle_Vanoeuvre,
TBL_TR_ACCIDENT_VEHICLE.vehicle_Make,
TBL_TR_ACCIDENT_VEHICLE.Vehicle_Model,
TBL_TR_ACCIDENT_VEHICLE.Unit_ID,
TBL_TR_ACCIDENT_VEHICLE.RowID,
TBL_TR_ACCIDENT_VEHICLE.UserID,
TBL_TR_ACCIDENT_VEHICLE.Vehicle_Color,
TBL_TR_ACCIDENT_VEHICLE.HP,
TBL_TR_ACCIDENT_VEHICLE.Seating_Capacity,
TBL_TR_ACCIDENT_VEHICLE.Class_Of_Vehicle,
TBL_TR_ACCIDENT_VEHICLE.Unladen_Weight,
TBL_TR_ACCIDENT_VEHICLE.Registered_Laden_Weight,
TBL_TR_ACCIDENT_VEHICLE.Skid_Length,
(select TBL_TR_Person_OutsideDetails.OutSide_state from
TBL_TR_Person_OutsideDetails,TBL_TR_ACCIDENT_VEHICLE where
TBL_TR_ACCIDENT_VEHICLE.Vehicle_Owner = TBL_TR_Person_OutsideDetails.Person_id and TBL_TR_ACCIDENT_VEHICLE.RowID =TBL_TR_Person_OutsideDetails.RowID)[OutSide_state],
(select TBL_TR_Person_OutsideDetails.OutSide_City from
TBL_TR_Person_OutsideDetails,TBL_TR_ACCIDENT_VEHICLE where
TBL_TR_ACCIDENT_VEHICLE.Vehicle_Owner = TBL_TR_Person_OutsideDetails.Person_id and TBL_TR_ACCIDENT_VEHICLE.RowID =TBL_TR_Person_OutsideDetails.RowID)[OutSide_City]
---here I faced the problem-
/*For the above Select only return one rows.But this select willreturn multiple row .I wnat to put that multiple data into a single field with comma*/
(SELECT @Defect_ID = COALESCE(@Defect_ID + ',','') + CAST(TBL_TR_VEHICLE_DEFECT.Defect_ID AS varchar(5))
FROM TBL_TR_VEHICLE_DEFECT,TBL_TR_ACCIDENT_VEHICLE
WHERE TBL_TR_VEHICLE_DEFECT.Registration_Number =TBL_TR_ACCIDENT_VEHICLE.Registration_Number)
select @Defect_ID
FROM
tbl_TR_Accident_report,TBL_TR_Person_Details,TBL_TR_ACCIDENT_VEHICLE
where
tbl_TR_Accident_report.Crime_No=@Crime_No and tbl_TR_Accident_report.Unit_ID=@Unit_ID
AND
TBL_TR_ACCIDENT_VEHICLE.Crime_No=@Crime_No
AND
TBL_TR_Person_Details.Person_ID = TBL_TR_ACCIDENT_VEHICLE.Vehicle_Owner
end
GO
How To Merge Multiple Rows Into Single Row
May 13, 2008Hi,
I have two tables of news feed NewsHeader & NewsDetails
NewsHeader:
Time Header
10:15:34 AM News1
10:15:34 AM News1
10:15:34 AM News1
11:19:39 AM News2
11:19:39 AM News2
12:35:04 PM News3
12:35:04 PM News3
NewsDetails
Time Text RowC
10:15:34 AM ABC 1
10:15:34 AM DEFG 2
10:15:34 AM HIJKL 3
11:19:39 AM AABB 1
11:19:39 AM CCDD 2
12:35:04 PM ZZYY 1
12:35:04 PM XXWW 2
Required Output
Time Header Text
10:15:34 AM News1 ABCDEFGHIJKL
11:19:39 AM News2 AABBCCDD
12:35:04 PM News3 ZZYYXXWW
Thank you.
How To Display Multiple Rows Of A Table In Single Row
Dec 15, 2007DECLARE @emp VARCHAR(1024) declare @emp1 varchar(1024)declare @emp2 varchar(1024)SELECT @emp1 = COALESCE(@emp1 + ',', '') + cast(eid as varchar(10)),@emp = COALESCE(@emp + ',', '') + ename ,@emp2 = COALESCE(@emp2 + ',', '') + desigFROM emp SELECT eid=@emp1,ename = @emp,desig=@emp2
View 1 Replies View RelatedUpdate Multiple Rows In A Single Query?
Jul 30, 2007I know this isn't right but I'm trying to build a single query in PHP to re write the sortorder column starting at 0 and writing every row in order.
Code:
update categories set (sortorder=0 where catid=32), (sortorder=1 where catid=33),(sortorder=2 where catid=36) where userid=111
PHP Code:
$qt="update categories set ";
for($i=0;$i<$num;$i++){
$a=$i+1;
$qt.="sortorder=$i";
if($a<$num){
$qt.=", ";
}
}
$qt.=" where userid=111";
Using PHP I can amend the loop above to slot in a row I want so I can change the sort order.
unfortunately I'm not sure how to build such a query in mssql, can anyone help?
Return Multiple Rows Into One Single String
Nov 1, 2005Hi,
I need to return multiple rows into one single string
Declare @String varchar(1000)
Create table Cus (CusId Int,CusName varchar(10))
Insert into Cus Select 1,'John'
Union All
Select 2,'Bob'
Select * from Cus returns
1John
2 Bob
I need to return the all the rows from Cus table into a single string. The return is dynamic.
I do not know the number of rows returned
My result should be
@String = 1,John,2,Bob
How can i do that ?
T-SQL (SS2K8) :: Merge Multiple Rows In Single Row
Jul 8, 2015I've a requirement where I need to merge multiple rows in single rows. For example in the attached image output, I need to return a single column for type Case like this.
CH0, CH1, CH2, CHX Case
CM0, CM1, CM2, CMX Mechanical
I'm using T-SQL to generate the column type. Below is my DDL.
USE tempdb
GO
CREATE TABLE ProdCodes
(Prefix char(8),
Code char(5)
[Code] ....
Combine Multiple Rows To Single Column
Jul 8, 2014With the below query iam able to retrieve all the tables invloved in a stored proc. But, what I want to display the table names as comma separated list for each table.
;WITH stored_procedures AS (
SELECT o.id,
o.name AS proc_name, oo.name AS table_name,
ROW_NUMBER() OVER(partition by o.name,oo.name ORDER BY o.name,oo.name) AS row
FROM sysdepends d
INNER JOIN sysobjects o ON o.id=d.id
INNER JOIN sysobjects oo ON oo.id=d.depid
WHERE o.xtype = 'P')
SELECT id,proc_name, table_name FROM stored_procedures
WHERE row = 1
ORDER BY proc_name,table_name
Query On Multiple Rows In Single Table?
Aug 1, 2014I have a table named LEDGER
LEDGER has two columns named PATID and CODE
Example data:
PATID CODE
1 Z1110
1 D3330
1 Z0330
2 Z1298
2 Z0987
2 Z0330
2 D1092
I need a query that returns PATID if they have CODE Z0330 but not Z1110. I only want one PATID to return if this condition exists.
How To Update Multiple Rows Using Single Sql State
Jan 28, 2008Hai
I want to update mutiple rows using single statement.
Gender
M
F
Now I want to update M as Male and F as Female in Gender Table using single Sql Statement.
Can anyone help me please
Thanks in Advance...
Suresh Kumar
Combine Multiple Rows Into Single SQL Record
Jan 28, 2008Hello:
I have the following table. There are eight section IDs in all. I want to return a single row for each product with the various section results that I have information on.
productID SectionID statusID
10 1 0
10 2 1
10 3 2
10 4 1
10 5 3
10 6 1
11 1 0
11 2 1
11 3 2
11 7 3
11 8 3
Need to return two rows with the respective values for each section.
productID section1 section2 section3 section4 section5 section6 section7 section8
10 0 1 2 1 3 1
11 0 1 2 3 3
Any information or if you can point me in the right direction would be appreciated.
Thanks
Script To Combine Multiple Rows Into 1 Single Row
Dec 22, 2006Hi,I'm working on a system migration and I need to combine data from multiplerows (with the same ID) into one comma separated string. This is how thedata is at the moment:Company_ID Material0x00C00000000053B86 Lead0x00C00000000053B86 Sulphur0x00C00000000053B86 ConcreteI need it in the following format:Company_ID Material0x00C00000000053B86 Lead, Sulphur, ConcreteThere is no definite number of materials per Company.I have read the part ofhttp://www.sommarskog.se/arrays-in-sql.html#iterative that talks about 'TheIterative Method' but my knowledge of SQL is very limited and I don't knowhow to use this code to get what I need.Can anyone help me?
View 7 Replies View Related