Integration Services :: Column Names Using Lineage ID

Nov 17, 2015

I am working on a custom component to implement some rules based on the column name. I am looking for ways to identify the column name using lineage id. Is there anyway we can derive column name using the lineage id?

View 3 Replies


Integration Services :: How To Load Multiple Excel Files With Same Column Names

Apr 29, 2015

I have multiple excel Files  each has one sheet (With same column names) need to be loaded in a single table. I tried For each loop but couldn't succeed.  

As I am new to SSIS. How to configure For each loop container for this...

View 5 Replies View Related

Integration Services :: Export Column Transform Says File Names Are Invalid Or A Device

Apr 29, 2015

We run std 2008 r2.  I'm looking at the files this transform is complaining about.   They seem to be named appropriately.  The customerid folders don't exist when this runs.  I'm going to put one in place to see if that is the problem.

The errors i'm getting are...

[Export Column [22]] Error: The file name "c:usersmyuserid heprojectnamecustomeridafilename.doc" is not valid. The file name is a device or contains invalid characters.
[Export Column [22]] Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR.  The "component "Export Column" (22)" failed because error code 0xC020207F occurred,

and the error row disposition on "input column "FILENAME" (29)" specifies failure on error. An error occurred on the specified object of the specified component. 

There may be error messages posted before this with more information about the failure.

[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED.  The ProcessInput method on component "Export Column" (22) failed with error code 0xC0209029

while processing input "Export Column Input" (23). The identified component returned an error from the ProcessInput method. The error is specific to the component,but the error is fatal and will cause the Data Flow task to stop running.  There may be error messages posted before this with more information about the failure.

View 7 Replies View Related

Integration Services :: Chinese Names Export To CSV - Garbled Names

Aug 11, 2015

As part if a recent requirement I have to export Chinese/Singaporean names in a CSV file. The data in the tables is a NVARCHAR(256).

I am using a FlatFile Connection manager where all the present columns from the table are exported as NVARCHARs. My understanding was that the Chinese/Singaporean names would blend seamlessly with NVARCHARs in place. But, they get garbled when pushed to the CSV.

Here is the connection manager setup

There are a lot of suggestions of fixing this by copying/pasting to a notepad file and changing the formatting... But I cant do that since the file is generated using a schedules SSIS package. How can I tweak the process to fix the issue?

View 4 Replies View Related

Finding Out Field Names By Lineage ID

Apr 26, 2006


is there any "robust" way to find out the name of a field in the pipeline by it's Lineage ID programatically? There is a sample code out there (on one of the blogs) but it seams not to be reliable...

The usecase is easy... What is the field name in an error output of that column that causes the error? We don't want to have hardcoded LineageIDs in the error handling so I think it's the best idea to go with field names... However we only get that LineageID...


View 1 Replies View Related

Integration Services :: How To Change Measure Names In SSAS

Aug 28, 2015

how to change measure names in ssas. i need to change it from Total measure to Total GM.

how to change Dimension names in ssas. i need to change it from ID to Master ID.

View 3 Replies View Related

Integration Services :: Load Excel File Dynamically With Different Columns And Worksheet Names

Apr 2, 2014

 I have a situation where I want to load the Excel file dynamically, and the excel file have different columns or even worksheet name. How I could approach this? I believe there's no way to modify the meta data (specifically the mapping) in the data flow.

View 6 Replies View Related

Integration Services :: Add New Column Based On Existing Column Using Derived Column Task?

Jul 28, 2015

I have a excel file which has a column called "Code" and their values are A,B,C,D,E,F,G,H.  I want to create a new column called "status" based on the values of "Code".



If A,C,E,G then "status" = "Active" else if  B,D,F,H then "Status" = "Inactive". I like to do it using "Derived Column".

View 4 Replies View Related

Integration Services :: Data Import From Excel Multiple Sheets With A Pattern Of Sheet Names

Aug 20, 2015

I have an excel file which contains lots of sheets. Some of them are named as DW-<day>-<month> (for e.g; DW-1-July). Like this I have sheets for the whole month. I have other sheets too with a different name. I would like to import data from these sheets only (DW ones). Upon my research I have found that this can be achieved via For Each Loop Container (I guess!). 

Post data import, I have a set of T-SQL query that I plan to execute via Execute SQL Task. 

View 5 Replies View Related

Reporting Services :: Obtaining Column Names From Data?

May 16, 2015

Got a table like:


In such a case need a view with custom headers with a prefix of Latest date found in the first field of Reporting_Date.

In other words if Reporting_Date consists data like following six entries:


Then, could there be anyway to achieve a View with the headers (i.e. complete data without any filtration) in the following form:


View 4 Replies View Related

Integration Services :: Move Multiple Files Based On File Names Listed In A Spreadsheet / File?

May 27, 2015

I need to move specific files from a server to another server on a monthly basis.  There are hundreds of files that are in the source directory and I need to move approximately 40 of those to the destination server.  I would like to easily add or delete the file list as needed.  I have seen where several variables were created for for each file name (and one for the path) and the ForEach Loop would go through them.  With 40 or more I was thinking that I could make a connection to an Excel spreadsheet or text file with a record for each file name and read in and and move to the next record and make that value become the content of a "FileName" variable.  Then if I wanted to add another file name I could just add another record to spreadsheet/text file or remove and the package would handle automatically....

View 10 Replies View Related

Integration Services :: Cannot Get Current Row Value Of Column

Oct 10, 2013

I have successfully created a linked server between SQL Server 2008 R2 and a Postgres db, and all is working fine, except when I try to run a stored procedure that returns a TEXT column.The top lines of the stored procedure (function in postgres) that is called are:

RETURNS TABLE(defectid bigint, featurevalues text) AS ...

The function obviously executes correctly in postgres, however when I try to execute the function in SQL Server via the linked server:

I get the error:

OLE DB provider "MSDASQL" for linked server "POSTGRES" returned message "Requested conversion is not supported.".
Msg 7341, Level 16, State 2, Line 1

Cannot get the current row value of column "[MSDASQL].featurevalues" from OLE DB provider "MSDASQL" for linked server "POSTGRES".The problem seems to be when trying to return the TEXT column featurevalues, as the following query executes as expected:

SELECT defectid

View 3 Replies View Related

Integration Services :: Export XML Column In SSIS?

Apr 19, 2015

 we have a table with xml column. This column has a large xml data . I am trying to use ssis to import xml from sql column (table a) to destination (another table).

steps which i did in ssis:

1.  execute sql task:

    fetch the xml column by query and store "full result set" into an object variable.

2. foreach loop:

select Ado enumerator option and select variable which has reset set of execute sql task. In variable mapping selected a new variable of type string.

when I run package I get below error:

"Error: ForEach Variable Mapping number 1 to variable "User::variable" cannot be applied".

View 14 Replies View Related

Integration Services :: Excel Column More Than 255 Characters

Dec 28, 2010

How to import data into SQL table from Excel column which has more than 255 characters?

View 7 Replies View Related

Integration Services :: Derived Column In SSIS

Jul 15, 2015

How to use derived columns in SSIS

string to datetime

Input value : (string)




Note : Having null or blank value

View 4 Replies View Related

Integration Services :: Column Metadata In Table

Apr 10, 2015

I am having one store procedure which use to load data from flat file to staging table dynamically.everything is working fine. staging_temp table have single column.all the data stored in that single column below is the sample row.


after the staging_temp data gets inserted into main probelm is to handle such a file where number of columns are more than the actual table.if you see the sample rows there are 4 column separated by "¯".but actual I am having only 3 columns in my main how can I get only first 3 column from the satging_temp table.output should be like below.


View 45 Replies View Related

Integration Services :: SSIS Package - Replacing Null Values In One Column With Values From Another Column

Sep 3, 2015

I have an SSIS package that imports data from an Excel file, replaces any value in Excel that reads "NULL" to "", then writes the data to a couple of databases.

What I have discovered today, is I have two columns of dates, an admit date and discharge date column, and what I need to do is anywhere I have a null value in the discharge date column, I have to replace it with the value in the admit date column. 

I have searched around online and tried a few things using the Replace funtion in Derived columns but no dice so far. 

View 3 Replies View Related

Integration Services :: How To Declare Multiple Derived Column In SSIS Derived Column Task

Jul 22, 2015

how to declare multiple derived columns in SSIS Derived Column Task in one i have around 150 columns coming from Flat file. I had created the required Expression in Excel and now i want add those in derived column task but its allowing only 1 expression at a time.

View 4 Replies View Related

Integration Services :: SSIS Derived Column Expression

Nov 23, 2015

I am trying to figure out my expression here with derived column 




Planned(which is after "/".

I achieved this in sql but not finding solution in SSIS Derived column transformation.

View 3 Replies View Related

Integration Services :: How To Change Sequence Of Source Column

Nov 3, 2015

I am working on 1 POC project.I have 2 customer having source file in txt format, but the column sequence of both customer are diffrent.Number of columns in all files are like below.


1     VIPIN    29


2     29      jayesh

As per source file you can see that CustA have column sequence ID,NAME,AGE and CustB Have ID,AGE,NAME sequence .I have target table #Temp with ID,NAME,AGE sequence.Like that I have many files from both customer, I have to load in ID,NAME,AGE sequence from all source file to target table.How can we change the sequence of source column before loading to target table.

View 5 Replies View Related

Integration Services :: Deleting Column From CSV File Using SSIS

Aug 18, 2015

How can we delete the column from SSIS file using ssis?

View 3 Replies View Related

Integration Services :: ISNULL Not Working In Derived Column?

May 7, 2015

i have a derived column which contains the days of a month from 1 to 31

I have this expression for column 1:

(DT_R4)([1] == 4 ? 0.5 : ISNULL([1]) ? 0.0 : 1.0)

But the ISNULL function will not work. I am sure, there are some NULL Values in Column [1] but i get all the Time the value 1.0 back.

I need the Value 0 instead of NULL to calculate the days in an extra Column.

So that i have in the end a result column which have values for example: 4,5 or 5,5 .why ISNULL is not working?

View 7 Replies View Related

Integration Services :: Derived Column Expression - Display Only Name?

Jun 16, 2015

How can i write expression for below input?

1858;# 1234;#Chun  Yang

I want to display only name.

View 2 Replies View Related

Integration Services :: Derived Column Date Conversion

Jul 8, 2015

So I am trying to change my date type which is in the 1/1/2015 12:30:10 PM to a 2015-1-1 00:00:00

So I am using Derived Columns to do the trnasformation in Visual Studio but I am getting the following error:

An error occurred while attempting to perform a typecast

So this is what I did

Step 1:
Load date into OLE DB Source

Step 2:
Replace function
REPLACE(ATL,"1/1/2015 12:30:10", "1900-01-01 00:00:00)

Step 3:
Replace Function

Step 4:
Replace funtion
REPLACE(REPLACE(ATL, "AM",":00"),"PM",":00"

Step 5: this is where the error occurs

Step 6:
Load into OLE DB Destination File

View 2 Replies View Related

Integration Services :: Conditional Concatenation In Derived Column?

Aug 3, 2015

I have 10 columns i.e from Segment1 to Segment10. I need to concatenate it with ".". All 10 segments can be null. If any of the segment is null i do not want to show ".". This is the expression I am using

 (DT_STR,100,1252)((ISNULL(SEGMENT1) ? "" : "." + SEGMENT1) + (ISNULL(SEGMENT2) ? "" : "." + SEGMENT2) + (ISNULL(SEGMENT3) ? "" : "." + SEGMENT3) + (ISNULL(SEGMENT4)
? "" : "." + SEGMENT4) + (ISNULL(SEGMENT5) ? "" : "." + SEGMENT5) + (ISNULL(SEGMENT6) ? "" : "." + SEGMENT6) + (ISNULL(SEGMENT7) ? "" : "." + SEGMENT7)
+ (ISNULL(SEGMENT8) ? "" : "." + SEGMENT8) + (ISNULL(SEGMENT9) ? "" : "." + SEGMENT9) + (ISNULL(SEGMENT10) ? "" : SEGMENT10))

But if any of the column contains Null or Blank I get ...... I do not want to show these .... if any segment is null.

What mistake am I doing in the above expression?

View 4 Replies View Related

Integration Services :: No Column Information Was Returned By Command

Nov 13, 2015

I can preview the SQL command in the OLE DB Source Editor and bring back all columns and results just fine but when I click on the Columns I get

TITLE: Microsoft Visual Studio
The component reported the following warnings:
Error at Data Flow Task [OLE DB Source [1]]: No column information was returned by the SQL command.

The columns are there in the preview - why can't SSIS get the column information?

View 6 Replies View Related

Integration Services :: Conditional Split Column Less Than Today

Oct 29, 2015

I'm trying to write a conditional split where I want to bring in only records where the date is less than today, but my problem is that I can't simply do this Column < GetDate() because if something comes in today, it takes the time into account and it will bring that record for today.  You can do this in SQL, but I'm not sure how to do that in SSIS


View 2 Replies View Related

Integration Services :: Handling Variable Column Inputs

May 18, 2015

I receive a data feed from a third party in a pipe delimited file.  From time to time, they add a column at the end.  I would like my ssis package to continue to process the data even if they add a column with out it breaking. How best do I handle this situation?

View 6 Replies View Related

Integration Services :: CASE Statement In Derived Column

Oct 6, 2015

I have an SSIS package in which I need to include a derived column. I've done derived columns a ton when there is just one condition being "tested". In this case there are two. I have the following update statement for a table I'm inserting data into:


[Code] ....

I'd like to be able to address this case on the load itself. I've used CONDITIONAL before, but not sure how that would work in this case. I'm trying to keep it as "simple" as possible.

View 5 Replies View Related

Integration Services :: How To Convert Date Column To A String

Nov 11, 2015

I have a column value as '201303' for the date. I need to get the output into two columns as 2013 and Mar. The date column is a integer one.

How can I convert this date column in a Data Convertion task.

View 6 Replies View Related

Integration Services :: How To Compare SSIS Variable And Column In Table

Apr 21, 2015

My Requirement IS : 1<sup>st</sup>run: if the record does not exist in the table insert the record (file_name, last_modified_file_date) and create a copy in the archive folder with file_name_currentdate.csv

Daily run: retrieve the last_modified_file_date from the input file and check if the retrieved date is greater than the last_modified_file_date in the table:

If true: create a copy of the input file in the archive folder and update the last_modified_file_date in the table with the retrieved date

If false don’t do nothing because the file has been archived in one of the previous runs.I have already retrieving the modified date and File Nae iserting into Filename Table: (That table has 2 columns which are FileName and FileDate) so In script task everytime the variable getting Modified date(retrieve the last_modified_file_date from the input file). How I can Compre the existing table record and variable. I have already imported the all Filenames and Modified into table like below.

View 3 Replies View Related

Integration Services :: Derived Column Transformation - Concatenation Of Two Fields

Jun 4, 2015

I have the following 2 fields that are sourced from an Excel spreadsheet

DocNumber - a 10 digit number
PostingRow - a number between 1 and 999

I would like to produce a new column that is a concatenation of these two fields, but the PostingRow needs to be a 3 digit number eg. 1000256153-001 ....

View 7 Replies View Related

Integration Services :: Leading Zeros With Employee Number Column

Jul 20, 2015

I need leading zero's with EmployeeNum column(source employeenum is datatype : float).

REPLICATE('0',8-LEN(RTRIM(a.[RecordID and EmpNum]))) + RTRIM(a.[RecordID and EmpNum]) AS [Employee Num]

I have done above query it's populated correctly in database table.


When ever we are excuting the package is not receiving the leading zero's to CSV file. Source it self truncating this leading zero's.

Source:OLEDB ,Destination : Flatfile(CSV)

View 2 Replies View Related

Copyrights 2005-15, All rights reserved