Invalid Authorization Specification

May 2, 2006

Hi:

I'm trying to connect to a data base of "sql server 2005 enterprise" named BCR.
The server name is "server1"
I'm using Windows Authentication to connect to server
The operating system is Windows Server 2003 Enterprise Edition Service Pack 1

When I run the aspx I get this error at line 21

---------------------------------------------------------------
System.Data.OleDb.OleDbException: Invalid authorization specification Invalid connection string attribute at System.Data.OleDb.OleDbConnection.ProcessResults(Int32 hr) at System.Data.OleDb.OleDbConnection.InitializeProvider() at System.Data.OleDb.OleDbConnection.Open() at ASP.pruebaLeeSqlServer_aspx.__Render__control1(HtmlTextWriter __output, Control parameterContainer) in Z:DigitalpruebaLeeSqlServer.aspx:line 21

---------------------------------------------------------------

This is my code:

------------------------------------------------------------------
Dim str2 As String = "Provider=SQLNCLI; Server = server1; Database = BCR"
Dim cnn2 As OleDbConnection = New OleDbConnection(str2)
Dim cmd2 As New OleDbCommand()
Dim drd2 As OleDbDataReader
Try
cnn2.Open()
cmd2.Connection = cnn2''''''''''''''''''''''''''''''''''''''''''''''''''''line 21
cmd2.CommandText ="SELECT LastName FROM Employees"
drd2 = cmd2.ExecuteReader
Do While drd2.Read
%>
<%=drd2.GetString(0)%><br>
<%
Loop
drd2.Close()
Catch exc1 As Exception
%>
<%=exc1.ToString()%>
<%
Finally
cnn2.Close()
End Try
------------------------------------------------------------------

What could be wrong?
Do I need enable permission for asp.net in sql server?
how I can do it?

Thanks!!

View 2 Replies


ADVERTISEMENT

Invalid Authorization Specification

May 2, 2006

Hi:
I'm trying to connect to a data base of "sql server 2005 enterprise" named BCR.The server name is "server1"I'm using Windows Authentication to connect to serverThe operating system is Windows Server 2003 Enterprise Edition Service Pack 1
When I run the aspx I get this error at line 21
System.Data.OleDb.OleDbException: Invalid authorization specification Invalid connection string attribute at System.Data.OleDb.OleDbConnection.ProcessResults(Int32 hr) at System.Data.OleDb.OleDbConnection.InitializeProvider() at System.Data.OleDb.OleDbConnection.Open() at ASP.pruebaLeeSqlServer_aspx.__Render__control1(HtmlTextWriter __output, Control parameterContainer) in Z:DigitalpruebaLeeSqlServer.aspx:line 21
This is my code:
Dim str2 As String = "Provider=SQLNCLI; Server = server1; Database = BCR"Dim cnn2 As OleDbConnection = New OleDbConnection(str2)Dim cmd2 As New OleDbCommand()Dim drd2 As OleDbDataReaderTry cnn2.Open() cmd2.Connection = cnn2''''''''''''''''''''''''''''''''''''''''''''''''''''line 21 cmd2.CommandText ="SELECT LastName FROM Employees" drd2 = cmd2.ExecuteReader       Do While drd2.Read %>  <%=drd2.GetString(0)%><br> <% Loop drd2.Close()Catch exc1 As Exception %> <%=exc1.ToString()%> <%Finally cnn2.Close()      End Try
What could be wrong?Do I need enable permission for asp.net in sql server?how I can do it?
Thanks!!

View 2 Replies View Related

Invalid Authorization Specification

Jun 9, 2004

Hello,

I have a web application (ISAPI) that accesses a SQL Server 2000 (sp3) database in the same machine as the Web Server (IIS 6). Windows 2003 Standard Edition is the operating System. So, when users access the aplication through the web it runs ok until display the error message "Invalid authorization specification" or, sometimes, another message about failure to inform ODBC DSN, although I dont use ODBC.

When the error occurs, the user press F5 in the browser and the operation goes ok. It's an intermitent and curious error.

Can somebody help me?

Thanks in advance.


Adão.

View 1 Replies View Related

Invalid Authorization Specification

Apr 23, 2007

Hi,

We are testing our product on Windows Vista with SQL Server 2005 SP2 and are encountering an "invalid authorization specification". We make the connection through a Windows service using a standard ADO connection. I have tried changing the provider in the connection string to SQLNCLI without any success. The application is written in Delphi 5 and has worked on previous versions of Windows running SQL Server 2005.

Thanks.

Steven

View 5 Replies View Related

ERROR 28000 Invalid Authorization Specification

Mar 9, 2006

a customer is getting on mS SQL 2000ERROR ODBC 28000 Invalid authorization specificationI dont understand because all the rigth are OKASP NET USER, IISS user and so on !i am trying to connect the to SQL from ASPX pages (it works for me and a few customers but not that one)what can be the problem ?thank you

View 6 Replies View Related

'Invalid Authorization Specification' From IDBInitialize::Initialize (c++)

Nov 13, 2006

Hi

I've been trying to connect to my local SQL Server instance (SQL Server 2005) using the SQLNCLI interface from c++ without success. I consistently receive an 'Invalid authorization specification' error (SQL state 28000 and SQL error number 0) when I call IDBInitialize::Initialize to connect to the database. I was hoping someone here could shed some light on this and help me out.

The strange thing is that I get no error if I leave the user blank (L"" in vValue.bstrVal) and try to connect. Also, IDBProperties::SetProperties returns 0 when the user is blank but 40eda when the user is set. This seems to be a message from the pipeline facility but I haven't found the description of the code (0xeda).

The user in the database is configured with no password and I can successfully connect to the server and open the database using that user through Management Studio.

I've also tried using the SQLOLEDB provider with the same results.

Suspecting that I'm setting the properties wrong I include a code snippet below showing how I'm setting the properties:

for (int i = 0; i < sizeof(dbprop) / sizeof(dbprop[0]); i++)
VariantInit(&dbprop[ i ].vValue);

// Server name
dbprop[0].dwPropertyID = DBPROP_INIT_DATASOURCE;
dbprop[0].vValue.vt = VT_BSTR;
dbprop[0].vValue.bstrVal = SysAllocString(L"localhost");
dbprop[0].dwOptions = DBPROPOPTIONS_REQUIRED;
dbprop[0].colid = DB_NULLID;

// Database
dbprop[1].dwPropertyID = DBPROP_INIT_CATALOG;
dbprop[1].vValue.vt = VT_BSTR;
dbprop[1].vValue.bstrVal = SysAllocString(L"test");
dbprop[1].dwOptions = DBPROPOPTIONS_REQUIRED;
dbprop[1].colid = DB_NULLID;

// Username
dbprop[2].dwPropertyID = DBPROP_AUTH_INTEGRATED;
dbprop[2].vValue.vt = VT_BSTR;
dbprop[2].vValue.bstrVal = SysAllocString(L"jph");
dbprop[2].dwOptions = DBPROPOPTIONS_REQUIRED;
dbprop[2].colid = DB_NULLID;

Cheers,
JP

View 1 Replies View Related

Invalid Authorization Specification Connecting To Sql Server 2000

Nov 15, 2005

I have a vb 6 program that has been running for several years against a 6.5 db. I convert the db to 2000, and now when I repoint the software to the 2000 db, I get "Invalid Authorization Specification" when I try to open the connection. The connection string is:Dim conn As ADODB.ConnectionSet conn = New ADODB.Connectionconn.Open "Provider=SQLOLEDB" & _            ";Data Source=" & sServer & _            ";Initial Catalog=" & sDB & _            ";User Id=" & goProcess.UserID & _            ";Password=" & goProcess.Password & ";"All of the variables are filled out correctly, when I go against a 6.5 it works, Sql Server 2000 doesn't.

View 2 Replies View Related

Invalid Character Value For Cast Specification

May 14, 2007

I'm getteing an error saying "[Microsoft][ODBC SQL Server Driver]Invalid character value for cast specification" when i try to debug a store procedure.
The Store Procedure parameters are as below.
PROCEDURE clCreateUnpostedTrxEarnType
(
@SERIES int,
@PERIODID int,
@YEAR int,
@PTRATIO float,
@CPTYPE int,
@CPTRXTYPE int,
@Startdate datetime,
@Enddate datetime,
@O_iErrorState int = NULL output
)

I'm passing the values as below

3, 8, 2007, 3, 1, 3, '2007.08.01', '2007.08.31', Null

I tried passing '20070801', '20070831' & 2007.08.01, 2007.08.31 for date.

How should i fix this issue to debug the below issue?
http://www.sqlteam.com/forums/topic.asp?TOPIC_ID=83297


Thanks & Regards

Pradeep M V

View 20 Replies View Related

Invalid Character Value For Cast Specification

Sep 22, 2007

Dear All,

I am using the backend SQLServer with Powerbuilder, I write a stored procedure and tried to create a datawindow to use that procedure but failed, it returns error code 22005 -Invalid Character value for cast specification. I tried to change any setting in ODBC but still failed.

Is anyone can give help? Thanks in advance.

Terrence.

View 15 Replies View Related

Invalid Character Value For Cast Specification

Jan 25, 2008

Hi All,

accessing through ODBC a frond end application which is running on MS SQL Server 2005, works just fine with a specific setup as concerned as the decimal/thousands separators ("," for thousands and "." for decimals). If i switch these settings alternatively ("." for thousands and "," for decimals), i get this error:
[Microsoft][ODBC SQL Server Driver]Invalid character value for cast specification.

I tried to search forum and internet but no luck.
Thanks in advance

View 4 Replies View Related

Invalid Character Value For Cast Specification

Mar 13, 2008

hello,
i have a problem with SQL Server Agent. Sometimes, when a scheduled job runs i get this error:

Error: 2008-03-13 06:04:50.50 Code: 0xC0202009 Source: Load Current OLE DB Destination [124] Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Invalid character value for cast specification". End Error Error: 2008-03-13 06:04:50.52 Code: 0xC020901C Source: Load Current OLE DB Destination [124] Description: There was an error with input column "collectDate" (217) on input "OLE DB Destination Input" (137). The column status returned was: "Conversion failed because the data value overflowed the specified type.". End Error Error: 2008-03-13 06:04:50.52 Code: 0xC0209029 Source: Load Current OLE DB Destination [124]

the code i use looks like this

DECLARE @Report_date datetime
SET @Report_date = dateadd(dd,-1,convert(varchar(10),getdate(),121))

select
CollectDate = @Report_date


the destination column is datetime.
Is this a known issue / bug? Because this doesn't happen everytime, and when it does happen all i have to do ia run the job again.


Thank you in advance

View 10 Replies View Related

Invalid Character Value For Cast Specification

Oct 31, 2007


I have a Data Flow task that is simply copying data from table A to table B. (there is a derived column in between however)

All the columns in table A are varchar(255). The columns in table B vary: floats, decimals, etc

However, I am getting a bazillion errors when I run this, each of them to the effect that:

Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Invalid character value for cast specification". An OLE DB record is available. Source: "Microsoft SQL Native Client"

I don't understand why this is happening... I've succesfully run similar scenarios with other packages, ie) moving data from one table to another table even though the tables have different data types.

Help

Thanks

View 17 Replies View Related

Invalid Character Value For Cast Specification From VC++ When I Execute A Proc

Apr 21, 2006

Hi Everybody,

I have a question regarding the running of a procedure from VC++ in SQL server.

well this is the scenario.

i have a procedure in SQL server and i am running that thru my VC++ code.
:eek:
i have a recordset class and i create an object of it and then do a obj.Open(). the procedure is fetching 24 records correctly in the query analyser and in my while(!(obj.IsEOF())) loop it gets the first record correctly but the moment it encounters obj.MoveNext(); it bombs and gives me the following error..

"Invalid Character value for cast specification ".

i don't know why this is happening

Thanks for you help.

View 2 Replies View Related

Invalid Character Value For Cast Specification: SQL Server 2000

Jul 20, 2005

Hi,I used SQL Server 2000 Personal Edition. I created a stored procedurehaving input parameters as smallint,tinyint,char,varchar andsmalldatetime. When I executed it by Query Analyzer, it's ok. But whenI executed it by ASP code that used ADODB.command, it showed error:Invalid character value for cast specification .Though SQL Server debugger, it showed:[Microsoft][ODBC SQL Server Driver]Invalid character value for castspecificationWhat did I do wrong? How do I fix this problem?TIAKrungPS: One of input parameters was smalldatetime, but I casting it in ASPas date as:Const adDate=7datetxt='2004/6/28'cmd.Parameters.Append cmd.CreateParameter("CoopId",adChar,adParamInput, 8, coopid)cmd.Parameters.Append cmd.CreateParameter("Addr",adVarChar,adParamInput, 100, addr)...cmd.Parameters.Append cmd.CreateParameter("Cdate",adDate,adParamInput, , datetxt)....cmd.execute

View 3 Replies View Related

Specific Invalid Character Value For Cast Specification Problem

May 25, 2007

Hi, I'm a new DBA and am a rookie when it comes to working with SQL Server 2005. I have been tasked with transfering an Access database to SQL Server 2005. Now I understand to use the import/export wizard, but am having problems fixing an error I am receiving. Here is the error...


Problem I
- Copying to [IS_Shared_ServicesTest].[dbo].[tblResource] (Error)
Messages
* Error 0xc0202009: Data Flow Task: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Invalid character value for cast specification".
(SQL Server Import and Export Wizard)

* Error 0xc020901c: Data Flow Task: There was an error with input column "Contract Start Date" (115) on input "Destination Input" (80). The column status returned was: "Conversion failed because the data value overflowed the specified type.".
(SQL Server Import and Export Wizard)

Here is the short version of the error. I realize that there is an error with the conversion and the error is in tblResource in column Contract Start Date. It is still transfering the column over, and on spot check they seem fine. Should I be really worried about an error? Or is there something that I can do with the Access or SQL server database to fix this?



View 6 Replies View Related

Integration Services :: Invalid Character Value For Cast Specification

Oct 5, 2015

In my SSIS Package I am loading data from Oracle source to SQL Destination. But while loading I am getting below error.

[OLE_DST_FORECASTSTANDARD [72]] Error: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred.
Error code: 0x80004005.
An OLE DB record is available.  Source: "Microsoft SQL Server Native Client 11.0"  Hresult: 0x80004005  
Description: "Invalid character value for cast specification".

[OLE_DST_FORECASTSTANDARD [72]] Error: There was an error with OLE_DST_FORECASTSTANDARD.Inputs[OLE DB Destination Input].Columns[UNITS_NEW] on OLE_DST_FORECASTSTANDARD.Inputs[OLE DB Destination Input].

The column status returned was: "Conversion failed because the data value overflowed the specified type.".

I have attached the table definition of both source as well as destination.

View 4 Replies View Related

Invalid Character Value For Cast Specification Error Upon Importing Text File

Apr 23, 2007

Hi all--Given a table called "buyers" with the following column definitions in a SQL Server 2005 database:



[BUYER] [nvarchar](40) NULL,

[DIVISION] [nvarchar](3) NULL,

[MOD_DATE] [datetime] NULL



This table is laden with Unicode data and the MOD_DATE contains no data--not even NULL values, and is giving me a headache as a result. I can export this data fine to a text file, but when I create an SSIS package to attempt import to another table defined exactly the same as above in another place, I get the following messages:



SSIS package "buyers_import.dtsx" starting.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x402090DC at Data Flow Task, Source - buyers_txt [1]: The processing of file "D: emp3uyers.txt" has started.
Information: 0x4004300C at Data Flow Task, DTS.Pipeline: Execute phase is beginning.
Information: 0x402090DE at Data Flow Task, Source - buyers_txt [1]: The total number of data rows processed for file "D: emp3uyers.txt" is 232.
Error: 0xC0202009 at Data Flow Task, Destination - buyers_tst [22]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Invalid character value for cast specification".
Error: 0xC020901C at Data Flow Task, Destination - buyers_tst [22]: There was an error with input column "MOD_DATE" (45) on input "Destination Input" (35). The column status returned was: "The value could not be converted because of a potential loss of data.".
Error: 0xC0209029 at Data Flow Task, Destination - buyers_tst [22]: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "Destination Input" (35)" failed because error code 0xC0209077 occurred, and the error row disposition on "input "Destination Input" (35)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
Error: 0xC0047022 at Data Flow Task, DTS.Pipeline: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - buyers_tst" (22) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0209029. There may be error messages posted before this with more information on why the thread has exited.
Information: 0x40043008 at Data Flow Task, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x402090DD at Data Flow Task, Source - buyers_txt [1]: The processing of file "D: emp3uyers.txt" has ended.
Information: 0x402090DF at Data Flow Task, Destination - buyers_tst [22]: The final commit for the data insertion has started.
Information: 0x402090E0 at Data Flow Task, Destination - buyers_tst [22]: The final commit for the data insertion has ended.
Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at Data Flow Task, DTS.Pipeline: "component "Destination - buyers_tst" (22)" wrote 0 rows.
Task failed: Data Flow Task
SSIS package "buyers_import.dtsx" finished: Failure.


Among the customizations in this package is the flag "ValidateExternalMetadata" set to False. The data itself is surrounded by " and delimited by semicolons for each field, with the header row set as the name of each column. It looks like this:



"BUYER";"DIVISION";"MOD_DATE"
"108 Joon-Hyn Kim";"TAD";""
"109 Kang-Soo Do";"TAD";""
"FS07 John Smith";"TAD";""

...



Can anyone suggest a course of action on how to handle the error when the MOD_DATE field is completely empty?



Thanks in advance,

Jonathan

View 6 Replies View Related

Integration Services :: Getting Invalid Character Value For Cast Specification Error In Designer

Jul 2, 2015

I have OLE DB source which executes SP with 2 parameters and output is flat file. Every time I run I immediately get output below. How do I troubleshoot further what might be causing this?

Information: 0x402090DC at Data Flow Task, Flat File Destination [2]: The processing of file "C:UsersadminDesktopout.csv" has started.
Error: 0xC0202009 at Data Flow Task, OLE DB Source [41]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80040E21 Description: "Invalid character value for cast specification".
Error: 0xC004701A at Data Flow Task, SSIS.Pipeline: OLE DB Source failed the pre-execute phase and returned error code 0x80040E21.

View 2 Replies View Related

Invalid Character Value For Cast Specification. The Value Could Not Be Converted Because Of A Potential Loss Of Data..

Jan 30, 2008



Why would I get these errors:
" SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E21 Description: "Invalid character value for cast specification".

There was an error with input column "UniqueID" (3486) on input "OLE DB Command Input" (3438). The column status returned was: "The value could not be converted because of a potential loss of data.".

Error: 0xC0209029 : SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "OLE DB Command Input" (3438)" failed because error code 0xC0209069 occurred, and the error row disposition on "input "OLE DB Command Input" (3438)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure."


I read related posts but could not figure out the error?

View 3 Replies View Related

[Microsoft][ODBC Text Driver] In The File Specification '...', The Col1 Option Is Invalid.

Mar 23, 2007

I'm trying to connect to a tab-delimited text file using the ODBC data access. I set it up using Administrative Tools - Data Sources (ODBC) from the start menu, and clicked the 'Guess' button under Define Format.

The schema it created looks like this:

[cims_output_data.txt]
ColNameHeader=True
Format=TabDelimited
MaxScanRows=0
CharacterSet=OEM
Col1=SIMNAME
Col2=TIMESTAMP
Col3=SIMTYPE
Col4=REGION
Col5=SECTOR
....etc.

It looks OK, but if I go back to Define in Administrative Tools and try to review it, I get a similar error message:

Ini File (or Registry) C:Program FilesCIMSschema.ini is corrupt.
Section: cims_output_data.txt, Key: Col1.

Has anyone seen this before? There is nothing on MSDN as far as I could find. I read on another forum that if you replace the label 'Col1' with 'Col' the problem is solved but it still reports that the schema is corrupt when I try to open it in Administrative Tools.

Bill.

View 5 Replies View Related

Database And Authorization

May 18, 2007

i know the basics about how to manipulate SQL server database, i mean the code itself, but there are few other things which i don't understand.

first, databases which i have created by my own, i can use only when
i have the website itself open (i get an icon at the taskbar)
but database such as 'master' which came with the sqlserver, i can acess always even without running the page with visual studio first. i have no idea why.

also, when i try to connect my website using my ip, i can only do it with
the master database.. those i created by my own i can only connect when i enter the URL page as localhost.

I don't understand what's USER INSTANCE for and how do i really set
a database username and password

can someone exaplin a little? thanks, because i am very confused .

View 3 Replies View Related

Develop Authorization Matrix

Sep 16, 2015

I am trying to develope a authorization matrix for cpmpany of 75 employees, with different roles and permissions for roles to some applications like CRM , diiffrent folders,databases etc. I tried to find some informaton about this auhtorizaion matrix.

View 0 Replies View Related

Check User Authorization

Jun 16, 2008

I need to write a sp (for my web app) that checks user authorization. Here is the scenario:

User Authorization Table (AuthTable)

UserIDFrom Cost CenterTo Cost Center
(UserId)(FromCC)(ToCC)

User130003600
User148005120
User152005250
User230003400
User237603840


Production Table (ProdTable) data:

Job NumberCost CenterQuantity
(JobId)(JobCC)JobQty

51002860250
51003120525
51004801262
52003001155
52005251276

I need to check the user security for each record that I read from the ProdTable against all entries in the AuthTable for the current user.

When I read the ProdTable and User ID = User1 then selected records should be:

5100/3120, 5100/4801, 5200/3001,

When I read the ProdTable and UserID = User2, then the selected records should be:

5200/3120

I’m not sure how to construct my sql statement. Can somebody give me a hand? Thank you.

View 1 Replies View Related

AUTHORIZATION With WINDOWS AUTHENTICATION -- HELP!!

Jul 23, 2005

i want to implement authorization with windows authentication and don'thave the slightest clue of how to do this implementation. the basicwindows authentication for this .NET application is already setup. myproblem lies within my inability to manipulate the username captured inthe authentication process and my knowledge of how IIS is involved.specifically, i have the following questions:1) what object(s) can be used so that the user's username can bemanipulated for the authorization process?2) in order to apply roles, do the users need to be placed in groups inIIS? if so, how does this work?3) is all the code that the application uses for roles in web.config?or does global.asax play a role in this matter?4) does the web.config file know to communicate with IIS because theauthorization type is set to windows?5) once authorization is in place, can a section of an .aspx file bevisible to a group or can only entire files be secured for a group?as you can see, i'm trying to figure out the relationship betweenauthorization and windows authentication so any help would beappreciated.thanks,johne: Join Bytes!

View 1 Replies View Related

Simple Authorization Problem

Sep 28, 2007

I know I'm missing something obvious and most likely just need some sleep to figure it out,but I'm trying to finish a block of auditing code off to hit a deadline. I can't figure out why I get an error when I try to do the following:


CREATE USER audituser WITHOUT LOGIN

GO

CREATE SCHEMA audit AUTHORIZATION audituser

GO

EXECUTE AS USER = 'audituser'

GO

--Create new, flexible audit structure

CREATE TABLE audit.AuditTable

(AuditID int identity(1,1),

TableName sysname NOT NULL,

AuditAction char(2) NOT NULL,

RowData xml NOT NULL,

AuditDate datetime NOT NULL CONSTRAINT df_table1_audit_editdate DEFAULT (getdate()),

AuditUser varchar(30) NOT NULL CONSTRAINT df_table1_audit_edituser DEFAULT (suser_sname()),

CONSTRAINT pk_table1_audit PRIMARY KEY CLUSTERED (AuditID))

GO


The user and schema are created properly. audituser is the owner of the schema and therefore should have the authority to do anything at all within the schema. However, the create table statement is failing and saying CREATE TABLE permission denied. Why?

View 1 Replies View Related

SQLDescribeParam With Subselect: Invalid Parameter Number/Invalid Descriptor Index

Apr 21, 2008

Hello,

I've got the following query:

SELECT zA."ID" AS fA_A
, zA."TEXT" AS fA_B
, (
SELECT COUNT(zC."ID")
FROM Test."Booking" AS zC
) AS fA_E
FROM Test."Stack" AS zA
WHERE zA."ID" = ?

With this query I call:
- SQLPrepare -> SQL_SUCCESS=0
- SQLNumParams -> SQL_SUCCESS=0, pcpar = 1
- SQLDescribeParam( 1 ) -> SQL_ERROR=-1, [Microsoft][ODBC SQL Server Driver]Invalid parameter number", "[Microsoft][ODBC SQL Server Driver]Invalid Descriptor Index"

Is there a problem with this calling sequence or this query? Or is this a problem of SQL Server?

Regards
Markus

View 7 Replies View Related

Authorization Problem After SQL 2005 On Vista

Aug 1, 2007

Hi Guys
Hoping that someone out there is able to give me some help on this one

I am trying to install SQL Server 2005 developer Edition on to a new laptop that is running Windows vista home premium edition

However after running the install and then trying to run the Service Pack 2 it producing an error saying that the windows authorisation is not valid and not using named pipes protocol. After some searching and googling I have checked all the option that I can see like that my login to the windows environment is the administrator which its is but from there I still am unable to log

Any Ideas people, or is this a known problem that I am just not seen

View 10 Replies View Related

Default Owner Using ALTER AUTHORIZATION

Jan 8, 2007

Hello,I have an SQL Server 2005 database that I'm trying to create using script.Everything works fine, but when I click on "Database Diagrams" I get anerror message that there is no database owner, and of course when I show theDatabase Properties, the database was created without one. Is there any wayto ALTER AUTHORIZATION to a default owner or system administrator, somethingvalid?Any direction would be appreciated.Thanks!Rick

View 1 Replies View Related

Report Server Reports Authorization

Nov 28, 2007

I am in the planning phase of building a Form Authenication Report Server project. The database contains the Role information for each report and for each user. The objective is to authenicate and authorize user so that only the authorized reports are available for the current user to view.

Base on my research these are my plans.

1. Deploy Reports onto the Report Server
2. Put Reports in folders to group different types of report (I am not sure is it possible to only the display authorized reports for the current user)
3. Design the custom Security extension to authenicate and authorize using the database


1. Is it possible to only display authorized reports for the current user to view by doing custom security extension?

View 5 Replies View Related

Custom Authorization In Reporting Services

Dec 4, 2006

For custom authorization, I am overwriting the CheckAccess method.

But how do I know what I am trying to access in CheckAccess method? I need to know what report the check access method is trying to execute for our requirements.

How do I get that?

View 1 Replies View Related

MS ACCESS Authorization Integration Issue

May 15, 2007

Hi,



I have an MS Access front end that links to an sql server 2005 database. The access front end uses NT Integrated security which should authenticate and authorize users.



Unfortunately it is not working this way. I have domain users (Active Directory) which I have given permissions to on my database and have given them, say db reader or db writer previliges.



Not only do these previliges NOT work, any user that is on the network can access the database and can read/write onto it as long as he has the MS Access front end.



I'm pulling my hair (and I dont have much left) trying to figure out what I am missing.. or if I even have the whole NT integration logic right.



One point worth mentioning is that if I change the connection type to 'SQL password authentication', the MS access front end prompts for a username and password and user permissions are set just they way i have set them in sql server 2005. But the only problem with this is that any person can just go and change the connection property in the MS Access front end back to NT integration and he/she can access the database with no restrictions whatsoever.



Where am I going wrong. HELP!



View 5 Replies View Related

Digest Authorization On HTTP Endpoint

Jan 16, 2007

I need to enable digest authorization on an HTTP endpoint, because the integration tools for some java code that needs to connect to it does not support NTLM or kerberos - only digest and basic. I setup a test endpoint in order to test only digest authorization (as opposed to the final endpoint which needs both digest and integrated), but I can't even get that to work - when I point my browser to it to see the wsdl it pops up with the login box, but the login always fails.

I have the feeling I'm missing some very minor piece that will just make the whole thing work. Below are some log entries as well as the script to create the test endpoint I'm hitting. Any ideas are very welcome, I've banged my head on this one for far too long.



SQL Server error logs shows a "Error: 26026, Severity: 14, State: 1" entry followed by a "HTTP authentication failed" entry.

Event Log Security entry on the server:

Logon Failure:

Reason: An error occurred during logon

User Name: MyUserName

Domain: mydomain

Logon Type: 3

Logon Process: WDIGEST

Authentication Package: WDigest

Workstation Name: -

Status code: 0xC000006D

Substatus code: 0xC00000FE

Caller User Name: -

Caller Domain: -

Caller Logon ID: -

Caller Process ID: -

Transited Services: -

Source Network Address: -

Source Port: -



Test endpoint script:

CREATE ENDPOINT [DigestTest]

STATE=STARTED

AS HTTP (PATH=N'/DigestTest', PORTS = (CLEAR), AUTHENTICATION = (DIGEST), SITE=N'SRV001',

CLEAR_PORT = 80, AUTH_REALM=N'mydomain', COMPRESSION=DISABLED)

FOR SOAP (

WEBMETHOD 'SimpleTest'( NAME=N'[TestDB].[dbo].[spSimpleTest]'

, SCHEMA=DEFAULT

, FORMAT=ALL_RESULTS),

BATCHES=DISABLED, WSDL=N'[master].[sys].[sp_http_generate_wsdl_defaultcomplexorsimple]',

SESSIONS=DISABLED, SESSION_TIMEOUT=60, DATABASE=N'TestDB', NAMESPACE=N'http://mydomain.com/',

SCHEMA=STANDARD, CHARACTER_SET=XML)

View 6 Replies View Related

Custom Authorization In Reporting Services

Oct 3, 2007

I need to implement custom security in reporting services. I have followed the standard example here:

http://technet.microsoft.com/en-us/library/ms160724.aspx



I got authentication to work without too many problems, and it authenticates by querying my custom table. I want to also maintain my authorizations in the same manner. I want to be able to define in my own tables that user test1 has permission to view reports 1, 3, 5, and 8. User test2 can view reports 1,3,5,8, and 9. User test3 can view 1, 2, and 4. Etc.

The authorization extension, contained in my version of Authorization.cs is where I expected to be able to do this. I wanted to be able to write code that queries my own tables and says, "does this user have permission to view this item?" Getting the this user portion is easy as is obvious in the many checkAccess methods. But being able to tell what item I am currently dealing with has proved impossible from the context of Authorization.cs, which implements IAuthorizationExtension. Knowing what type of item I am dealing with is obvious, but I need to know something that uniquely identifies the exact item I am dealing with.

How can I determine in checkAccess or any of the other available methods what "thing" they are looking at? What can I examine to determine that for instance this particular authorization request is against "Report 1"? It seems that if I was allowed to completely override Authentication to use my tables, I should be able to override Authorization to do the same. Is this possible or am I missing something?


Can anyone help? Thanks.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved