Jump To Document Map
May 9, 2008When you use the Jump to Report feature is there a way to also go to a specific document map link?
View 5 Replies
ADVERTISEMENT
Navigate To:Jump To Url Then Jump To Url Again!
Apr 17, 2007I am stuck on this and its happening no matter what I do. I have a huge project that holds tons of reports. Most are sub-reports.
I have 5 sections I will just use one for example
communictions (totals)
jump to report - summary data
Jump to report - detail data.
The when I get to the detail data I always get the error:
The path of the item '(null)' is not valid. The full path must be less than 260 characters long; other restrictions apply. If the report server is in native mode, the path must start with slash. (rsInvalidItemPath)
I have tried to do all sorts of things and no matter what I do I cant get it to work.
This is a web application using the ReportViewer for the web, SQL Server 2005 SP2
I have searched high and low for an answer to this and nothing works, not even the get instead of the post.
Any ideas on how I can get this to work?
Thanks
Stokh
Using Jump To Report Navigation Option- Jump To The Same Report
Apr 28, 2008
I have a report that uses report parameters and navigation in the textbox.
When I click in the textbox, it jumps to the same report, but I cannot see the report parameters any more(hidden ). I cannot change the report parameters.
When I use only the report paramenters (no navigation option), they appear always during the run time.
How can I do to keep the report parameters visible all the time using "jump to the same report"??
Thank you so much. indyw
Jump To URL
May 8, 2007to open a report in a new window
i looked up the following line of code
=window.open('" & Globals!ReportServerUrl & "?" & Globals!ReportFolder & "/" & "myreport" & "&rs:Command=Render&rc:toolbar=true','','width=800,height=600,left=10,top=10,resizable=1,menubar=no,location=no,status=no'),_top"
I do not understand what & Globals!ReportServerUrl & "?" & Globals!ReportFolder & "/" & "myreport" &
this implies.
I have the current report name as
http://houapps277/ReportServer/Pages/ReportViewer.aspx?%2fIMS-Reports%2fCR000648
and I need to jump to
http://houapps277/ReportServer/Pages/ReportViewer.aspx?%2fIMS-Reports%2fCR000699
both reports are in same folder IMS-Reports.
Thanks
Jump To Url
Nov 2, 2006I use the "jump to url" in a report that links out to a page on our company intranet. Our internal users have to use http and an external user needs to be routed to the site w/ https. How can I account for this in a report?
View 3 Replies View RelatedJump To URL ....
Apr 2, 2008
Hi...
I want to add two link(navigation) buttons in SINGLE CELL ... if i click on 1st it should navigate to xyz page and if i click on second then it should navigate to abc page...can u pls help me...
Waiting for ur reply...
Roopesh Babu V
Jump To URL & Javascript
Oct 23, 2007Hi, I am trying to link to a page outside of reporting services from a report. I am using SQL Server 2005 Reporting Services [Standard Edition]. The hyperlink works if it is a straight URL, however, nothing happens if I modify it to use Javascript so I can open the link in a new window. I have found many posts on the web from others indicating it should be really easy, but I can not get the link to recognize ANY Javascript (also tried a basic alert with no luck).
The Javascript I am using is well formatted. I can place it into a test page and it runs fine. I can also RC and View Source on my report, grab the entire link, put it in a test page and it works fine. It just doesn't work from the report - ?
Any ideas?
Thanks in advance,
Francine
Jump To Report
Feb 1, 2007Hi
I want to use Jump to Report option under Navigation tab.
I have two reports both with Same parameters and parameters are multiple value selectable.
In Jump to Report this is how I set the parameter value.
LeadershipTeamId =Join(Parameters!LeadershipTeamId.Value,", ")
CostCentreId =Join(Parameters!CostCentreId.Value,", ")
CostElementGroupId =Fields!CostElementGroupId.Value
This works fine if I have only one value selected for CostCentre and LeadershipTeam but when I select the multiple value I get the following error.
The value provided for the report parameter 'LeadershipTeamId' is not valid for its type. (rsReportParameterTypeMismatch)
Am I missing anything here?
Any help would be highly appreciated.
Best Regards
Jump To URL Error
Jul 27, 2007I'm trying to put a hyperlink in a field on a report. I've found the action property and set the "Jump To" box with the following:
="http://dveowb01.wbhq.com/UnitsStatusLog/StatusEntry.aspx?Unit=" & Fields!Unit.Value
I'm getting this error message:
The Hyperlink expression for the textbox €˜textbox24€™ refers to the field €˜Unit€™. Report item expressions can only refer to fields within the current data set scope or, if inside an aggregate, the specified data set scope.
Please help.
Thanks,
Jennifer
Jump To Report
Mar 5, 2007Hi all,
I have created a hyperlink(textbox) with an action property setting of "Jump to report" The report I am jumping to takes 5 parameters. I want to pass 4 of the parameters from the main report and have the user enter the 5th. I have mapped the 4 parameters and in preview mode, everthing works great. In preview mode, the parametrs are passed and the last parameter is left waiting for entry. After deployment, this is not the case. In the deployed state, I simply get an error that parameter #5 is blank. Is there there something I am missing?
regards,
Bill
Jump To Report In New Window?
May 11, 2007Hi all,
Is it possible to use the "jump to report " action and have the report open in a new window?
regards,
Bill
Jump From Every Point On A Report
Dec 4, 2007Hello.
I have a report with a graph in it.
I want to jump to another url when I'm clicking on my report.
I know how to sat the action for clicking inside the report on one of the data number but I want it to jump when I'm ckicking anywhere on the report.
Is there a way to do so?
Thanks.
Question About Jump To URL Function
May 19, 2006Hi !
When using the Jump to URL function, is it possible to open the URL in a new page instance of doing a redirect?
Thanks !
How Can I Jump Out Of An Iteration When Using A Cursor?
Jan 24, 2008Is there a key word one can use to immediately jump out of an iteration when using a cursor, and move to the next record using 'fetch next' cursor?
View 1 Replies View RelatedJump To Report Navigation
Sep 11, 2007
Can I have a report that is nothing more than a parameter and when the user selects from the list it will jump to another report based on which parameter was selected?
I can create a report with a text box that I can click to jump. I'd like to be able to eliminate the click on text box if possible and jump directly from parameter select pull down box.
Thanks.
Jump To Bookmark In Reports
Aug 17, 2007Hi,
Please tell me how to implement the "Jump to Bookmark" in reports,
I mean to say, i have to move to another area or page in a report.
Please provide a sample for the same.
Thanks and Regards
Altaf Nizamuddin
Hyperlink:Jump To Report
Mar 14, 2008Hi,
I have a report that uses Jump to Report and passes Reportname with parameter. Is
there a way to suppress the parameter value in the URL so the user is unable
to manipulate the parameter and execute the changed URL?
This is what I have so far..
="http://<servername>/ReportServer?/<folder>/<reportname>&<parametername>="+Fields!<fieldname>.Value.tostring
because when reports exported to excel, hyperlink path will be displayed and should not display to the user.
Or can we set Hyperline action dyamically?
Thank you.
RSUser
Jump To Report With Parameters
Dec 7, 2007Hello,
I have a report (Report1) with a subreport (SubReport2). The subreport is a barchart. On the data values for the chart, I have a "Jump to Report" action defined. This jumps to another report(Report3) that has some parameters on it. Neither Report 1 nor SubReport2 have any parameters, only Report3.
When I jump to Report3, I would like to have it open up blank with the parameters open to be selected. I don't want to pass in any parameters as I jump to it. This works perfectly when I test it in my Preview pane in BIDS. However, when I upload the report to the ReportServer, when I click on SubReport2 to jump to Report3, I get an error saying
The 'Months' parameter is missing a value
There is no parameter pane for me to choose the parameters (or any other report viewer pane). However, if I open Report3 directly without trying to use Report1 and SubReport2 to jump to it, the parameter pane is there, everything works right.
Does anyone know how I can get the parameters pane to show up when I jump to Report3?
Thanks,
Andy
Jump To URL With A New Target _blank
Mar 10, 2007Hi all,
In Opening a display of invoices in Report Server I have a ULR link in the Jump to URL section under the navigation tab.
html code given : <a href="url" TARGET="_top">my value</a>
I would like have this code html : <a href="url" TARGET="_blank">my value</a>
How can I do it ?
Thanks.
Jump To Report Help Needed.
Nov 13, 2007I am very new to SSRS & SSAS .
Here is my problem. I have a SSRS report that uses a SSAS cube for as it's datasource. I have a drop down parameter box where the user can select a year (2005,2006,2007,etc..) They click the View Report button and the report is generated. On one of the textboxes properties, on the navigation tab I have Jump to Report activated. I select the parameter from the receiving reports with the value of the dropdown box.
What I'm trying to do and can't, is to jump to that report passing the contents of the dropdown box. The receiving report is a SSRS report with a datasource being the SSAS. How do I make the receiving report open based on the parameter that was sent ??
All ideas are welcome...
Thanks ..
Report Navigation And Jump Url
Feb 20, 2007Hi all,
I have got a report with external hyperlink.
When I put this link in TextBox properties >> Navigation >> Jump URL of my gridView : http://www.micheldegremont.com it works.
However, if I put "http://www.micheldegremont.com?id=" + Fields!ID.Value it doesn't work. I haven't not link in my report.
And if I put http://www.micheldegremont.com?id=Fields!ID.Value my report create a hyperlink to http://www.micheldegremont.com?id=Fields!ID.Value and no http://www.micheldegremont.com?id=1
Thanks for you help.
Amending Jump To Url Properties?
Dec 7, 2007Hi
I have a simple report which just lists product details and summary. So somthing like this:
Product Id | Hits | Sales
I want to add a action (Jump To URL) to the Product ID field, which then redirects it to its product page on a website, however, how do I pass the ID field within the url?
for example, typical product page on the website is
www.mysite.com/products/P1234.aspx
I want to do so that I get
www.mysite.com/products/P =Fields!ID.Value .aspx
but obviously that doesnt work!
Anyone have any ideas?
Jump To URL With A New Target Page
Feb 6, 2006In Opening a display of invoices in Report Server I have a ULR link in the Jump to URL section under the navigation tab.
I have the URL with the invoice number in the expression. Is there something I can add to this expression that will force the interface to Open a new windows page instead of the existing window?
How Do I Jump To Another Report Based On A Value
May 3, 2007How do I jump to another report based on a value in my current report?
View 5 Replies View RelatedJava Script On The Jump To URL
Jan 4, 2007Hi, folks,
Does anybody know how to make java script work on the Jump to URL
Going Back After Jump To Report
Dec 6, 2007Hi,
I jumped from one report to enter (useing the "jump to report" option).
How can I go back to the first report?
I tried with the "backspace" button and I tried useing "javascript:history(-1)".
Thanks
Why Would My Int Primary Key Jump To Higher Number
Apr 19, 2008Why would my int identity primary key column go from one day being 847 and the next number being inserted to 49048?
View 2 Replies View RelatedJump Or Detect Corrupt Lines In DTS
Mar 7, 2001Hi,
I import from CSV files into MSSQL tables.
My hierarchy absolutely wants to keep the CSV standard format.
Some string have quotes inside.
With Sybase it jumps these corrupted lines.
With MSSQL and DTS, it breaks all the importation.
Does anyone know how to jump (aloso is there a possibility to detect the number of corrupted lines, Sybase can do that) ?
Thanks for your answers
Best Regards
Axel
Same Jump To URL Expression Working On 1 Reportserver But Not Another
Jan 11, 2007I have the following 2 "Jump to URL" expressions in a report:
=void window.open('http://barn/apx/PortfolioDetail.aspx?linkfield=749', '_blank')"
and
=void(window.open('http://www.google.com','_blank'))"
Both of these expressions work on 1 reportserver but not another (within exact same report). Has anyone else had similar issues?
The reportserver that works is on IIS v5.1 and SQL 2005 on a XP SP2 machine. The reportserver that does not work is on IIS v6.0 and SQL 2000 on a Win2003 SP1 machine. The report is exactly the same (even the dataset sources are the exact same) and it is deployed on 2 different machines as above.
Could the IIS version difference be the issue? Or a SQL server version difference?
Has anyone gotten this expression to work where the reporting databases are on SQL 2000? TIA.
Jump To Report Without Running It Automatically
May 18, 2007Hi
I need to be able to click a hyperlink in one report to open a linked report, but without automatically running the linked report.
Scenario.
I have a report showing customer details and on this page there is a link to a price enquiry report. This price enquiry report has two parameters: customer code and product code.
When I click the price enquiry hyperlink in the customer details report I can only attach a value to the customer code parameter. The product code parameter is not known at this stage and would have to be provided by the user after the price enquiry report is opened (but not run). The customer code parameter should already be filled (carried in the link).
When I click the link at the moment I get the error "The 'product' parameter is missing a value".
Any advice much appreciated.
Thanks,
SQLServant
Jump To Report - Parameter Missing Value
Nov 30, 2007
Hello
I have set up a report with a field in a list as a link to another report . I am passing all the parameters in correctly (4 parameters : 1 from a field value and 3 from parameter values). When I run the report and click the link, it jumps to the other report but one parameter is missing a value - the parameter I got from the field value. I really don´t know why this is happening as it was working fine until I added another parameter to the reports and suddenly it doesn´t work anymore.
Is there a limit on the number of parameters I can pass or something?
Please help!
Jump To Url Along With The Parameters To Be Open In A New Window
Mar 7, 2008Hi All,
I have seen many posts in this regard and tried different alternatives but could not succeed.
I have a url to non reporting services application from the ssrs report.
Initially i have tried with this url :
="http://bl-Kalyke/proactis/Main/IPopUpInvoiceByInvoiceNo.asp?Connection=DINR&UserName=SSRSL&Password=55r5l&Company=MAIN&InvoiceNo=" + mid(Fields!VoucherNumber.Value,4,7)
It is working fine, but the problem is, it is opening in the same window of the browser.
But the requirement is to open the url in the window. so i have tried withis url :
="javascript:void(window.open('http://bl-Kalyke/proactis/Main/IPopUpInvoiceByInvoiceNo.asp?Connection=RNID&UserName=SSRSL&Password=55r5l&Company=MAIN&rs:Command=Render','_blank','resizeable=1,toolbar=1,status=1,menu=1,top=20,left=20,width=740,height=730 InvoiceNo=" + mid(Fields!VoucherNumber.Value,4,7) + "'))"
i am not able to find where i am going wrong. So help me in this regard.
Thanks in advance.
Jump To URL Adds TARGET=_top
Nov 9, 2007We host our reports in an ASP.NET page using a rsweb:reportviewer control. This is contained within a frameset in the web site. I've created a "Jump to URL" on a report field from this report to another page hosted on the same site. This works, but the problem is that the report gets rendered with a hyperlink that has a TARGET="_top" attribute in it. Is there any way to override this. This pops out of the frameset because of this.
Thanks.