Log Shipping - Switching Recovery Model In Log Shipping
May 13, 2007
Hi
I could not able to find Forums in regards to 'Log Shipping' thats why posting this question in here. Appriciate if someone can provide me answers depends on their experience.
Can we switch database recovery model when log shipping is turned on ?
We want to switch from Full Recovery to Bulk Logged Recovery to make sure Bulk Insert operations during the after hours load process will have some performance gain.
We have our Production server having database on which Few DTS packages execute every night. Most of them have Bulk Insert stored procedures running.
SO we have to set Recovery Model of the database to simple for that period of time, otherwise it will blow up our logs.
Is there any way we can set up log shipping between our production and standby server, but pause it for some time, set recovery model of primary db to simple, execute DTS Bulk Insert Jobs, Bring it Back to Full recovery Model AND finally bring back Log SHipping.
It it possible, if yes how can we achieve this.
If not what could be another DR solution in this scenario.
I have a warm standby (secondary server) receiving log shipping files.
The database has 5 files all in the primary filegroup. Two of the files need to be moved from one hard drive to another. Whats the best way / process to accomplish the move and re-establish the log shipping recovery status?
I'm allowed to do Log Shipping from x.contoso.com to y.contoso.com, however there is a requirement to have the same data made available to servers residing on z.contoso.com.
Connectivity between x.contoso.com and z.contoso.com is not permitted, so configuring log shipping with multiple targets is not possible.y.contoso.com and z.contoso.com can talk to each other, so what is the most efficient way to move data from y to z.
I have log shipping enabled on databases(primary and secondary) and works fine. I need to implement TDE on the database. I have experience on implementing TDE on databases which are not used for log-shipping.steps needed to setup TDE which are involved with log-shipping.
Lets say I have a single instance SQL Server on a 2 node cluster with node names Server X and Server Y. These are part of Domain A.
SQL Agent Account runs under service account - DomainASQLAct.
Now I have Server Z which is a standalone SQL Instance on Domain B and there is no trust between domain A and B, not even one way trust.
Even though I dont have trust, I need to configure log shipping for the SQL Instance which is clustered under Domain A to a standalone box in Domain B.
Microsoft recommends Local Account(SQL Agent) to be used for Cross Domain Log Shipping. Also when there is no trust, MSFT recommends to use the same login name and password, however as my setup includes a cluster and cluster cannot have local account I'm not sure what will be the best strategy to follow here.
I am trying to imitate a DR situation where the primary db is down and I need to recover the secondary db on another server. They are a log shipping pair and so to imitate a DR, I remove the log shipping in the primary server maintenance plan. Then I go to the secondary server and disable the log shipping jobs there and attempt to do the following
RESTORE DATABASE database_name WITH RECOVERY
but I can't get exclusive use because the database is in use. But I don't see any other users... am I wrong in thinking that the log shipping was completely deleted? Anything I can do to force exclusive access?
I have two databases on a Production Server that I want to Log Ship to a Test Server. According to the sys.master files the physical File Location is on an E drive. Early attempts at Log Shipping these two files error'd out due to space issues on the E drive (one Log Shipped and then one err'd out). I was subsequently informed from the server group that they would prefer that I Log Ship these two database files over to the M Drive where more space is available. In fact, they modified the Server Properties / Database Settings / Database Default Locations (for Data and Log) to the larger M drive (I'm not really sure why they just don't increase the E drive space but there is proabably a good reason).
Okay, so now my problems have been solved. Easy enough. Now I deleted the successful Log Shipped database and started from scratch. However, as before, one db restored and one failed (due to space issues). Apparently, both db are pointing towards the E drive. How is that possible?
So here I am with one successful database and the normal sys databases pointing to the E drive. What is the best way of approaching this move to the larger and preferred M drive?
I've got log shipping set up, and everything seems to be working fine, but the log files are not being deleted from the primary server despite configuring log shipping to retain them for 3 days. I see no errors concerning the log shipping, but did not configure a monitor. What process is responsible for deleting the older log backups, and how can I look for errors. I could simply set up a jog to delete the older files, but that will only mask the issue.
Setup log shipping from an Australian SQL2008R2 server to a UK SQL2012 server. With the time involved to copy the large backup file across a WAN link, we end up with around 2 days of log backups since the full backup.
- The Full Backup is restored to the UK Server to create a new database in norecovery mode. - The first log backup file is manually copied to the UK server and restored. - Start the Log Ship copy SQL Agent job - starts copying files prior the full backup on the Australian server. Copies 1 Log backup file and then fails. - Manually copy the next Log backup file to the UL server. - Start the Log Ship Restore SQL Agent job and runs successfully and restores the Log file. - Start the Log Ship copy SQL Agent job - AGAIN it starts trying to copy files prior to the Full Backup. IS this correct behaviour? I thought it should only copy Log files since the full backup.
SQL Server 2012: Out of all the databases in the instance we have a requirement in which we need to maintain a high availability for the databases around (128). Our team believed log shipping will apt for this requirement but not sure on it's limitations, how many databases are allowed or supports this log shipping from a single instance.
I want to redirect the logshipping primary backup folder to another drive, how to change the configurations steps to move the primary logship folder to another location within the same server!
Out of using stored procedure, reports and all this staff, I want to know the possible way to make sure that the data inside my Secondary Server Read only database are same as data in my primary server database.
We tried to configure log shipping using script generated by GUI and when executed specific script which is meant for secondary server the database is not created and threw below error.
Msg 15010, Level 16, State 1, Procedure sp_add_log_shipping_secondary_database, Line 50
The database 'BUBALLO' does not exist. Supply a valid database name. To see available databases, use sys.databases.
Note: Only Copy, restore and alerts jobs have been created.
The account I'm trying to configure log shipping is the service account by which SQL and agent services are running and folder in where data and log files are intended and to be created is open to all (everybody has read/write permissioins) believe the issue is not with permissions.
I recently enabled log shipping on our production database, and I had initially accepted the default of 72 hours to delete copied logs. Well, i am running out of space quick, and I need to edit it to something like 6 hours.
When I try to disable log shipping in order to recreate it, or if I try to edit the secondary server settings when I am logged in as SA, or my windows account which has the sysadmin role assigned, I get an error that says:
Only members of the sysadmin fixed server role can perform this operation. Error 21089.
I've restarted the sql service, disabled and enabled the permission on my account, but for the life of me, i cannot get this to work!
I 'm sure I am missing something obvious, hopefully someone could point it out. After a failover log shipping, I want to fail back to my inital Primary server database; however, my database is marked as loading. How can I mark it as normal?
I did the failover as follow:
I did a failover log shipping from the 2 server Sv1 (Primary) and Sv2 (Secondary) by doing the following
1) Stop the primary database by using sp_change_primary_role (Sv1)
2) Change the 2nd server to primary server by running sp_change_secondary_role (Sv2)
3) Change the monitor role by running sp-change_monitor_role (Sv2)
4) Resolve the log ins - (Sv2)
5) Now I want to fail back - I copy the TRN files to Sv1 - use SQL Ent to restore the database at point in time. The task is done; however, the database is still mark as loading. I could not use sp_dboption.
Pages on a full recovery model database corrupted, need to ensure data loss is minimal for restore operation am thinking about restoring the latest full backup.
I am setting up a 3 node cluster as part of an availability group.Initially I tested failover between nodes using SQL Management Studio and everything failed over successfully when I stopped a node, and I was still able to write queries. I started to test with an application which connects using an SQL user and whenever I would switch nodes, I would get login failed. I believe the cause of this issue is because the server logins SID's which are tied to the database are different than the server logins on the other nodes which resulted in login failed.how can I ensure that the server logins SID's are the same between nodes? Is there a way of copying this over or how is this supposed to be done? I read a little about contained databases where I could just set the login on the database itself vs. creating a server login but I would rather not go down that route.
I need to create a RO copy of a production DB owned by an outside company. We are connectd via a WAN link, but cannot use replication. They are proposing using an initial load via tape, and sending us a text file nightly with the days changes to the DB. We will then need to load that data using BCP, DTS or some other method. Does any one have any ideas on using log shipping instead of the text file. It would only be practical to get a fresh load of the entire DB once a quarter or once a month at most. It is a 40+ GB database and we are expecting 100 to 200 MB of logs per night. For business reasons, we are limited to some type of file transfer mechanism for the data transfer, and cannot really change their backup schedule which is nightly fullbackups and tlogs every 30 minutes.
I am using SQL 2k EP Editions with SP2 on Win 2k Advance servers. Since more than week or so I am trying to establish log shipping between two servers. But its not working.
I am using database maintainence plan wizard to set up log shipping. Every thing works fine as far as wizard is concern, it creats plan for log shipping. But my log shipping is not working. The plan to back up log on source database is working fine. I can see the job history and the log files in the backup folder. But I have found that the job on the standby server to copy log file on network folder is failing and so the job to restore log on stand by server. I get the following message
"sqlmaint.exe failed with error state....."
Little reaserch on the standby server found that sql server is using maintainence plan to copy and restore log files, but i do not see any database maintainence plans on standby server as well as I have checked that there is no plan id in sysjobs table on either server.
I have sa rights. The account used by sql service and sql agent have admin rights and they do have rights to access the network folder for both the servers. So there is no rights problem.
I have followed all steps published in white paper for setting up log shipping on microsoft web site.
I have searched microsoft KB but it is of no use for sqlmaint.exe.
This might end up being fairly lengthy...I'm in the midst of implementing log shipping as a "warm stand-by" solution at my company. All the components appear to be in place: I'm using cmd shell to copy the backup device file to a remote server and then execute a RESTORE stored procedure on the remote server. The copy and restore work just fine. The problem I'm having is with the transaction log dumps and restores. We normally dump transaction logs (and then truncate) every hour. With the log shipping being implemented, we're going to want to do separate log dumps every ten or fifteen minutes, copy that dump over to the remote server, and then apply that log to the database. Here's the question: for the log ship portion, I don't truncate the log. But after the "normal" log dump occurs, things get tossed out of whack. When you try to apply a log, I get the message "database has not been rolled forward enough....". Has anyone encountered this type of issue and if so, how did you work around it? I'm assuming it's a simple of issue of certain options you set on your dumps and scheduling.... I'd appreciate any help.... Thanks!!!
We are considering implementing log shipping. Do the sql server logs keep track of the logs that are shipped and applied through log shipping? Or is there some other way to make sure that all logs have been shipped and applied?
I have been successful in getting log shipping working but still have some nagging questions that I cannot find answers to.
1. I had a situation where the copy for one TranLog took much longer than the 15 minute interval I have it setup for. It seemed to get stuck on that copy. Is that how it is supposed to behave.
2. Related to the question above, weekly, I have jobs that reorganize, check integity, recalc statistics. Would these jobs create very large log files? If so, how do others deal with this?
3. Is there any documents available that discuss testing converting your secondary server/database to your primary and back again?
4. Is there a way to setup Email notification to report out-of-sync conditions?
While configuring log shipping, if i choose the "allow database to assume primary role" then the "ceate and initialise new database " option is selected by default..Does this happen all the time or am i missing something.What if i have already initialised the destination database.
I am testing my log - shipping strategy. I have tried with northwind database and it was successfully created and is operating. However in order to test I have created a new Test Table in the primary database to see whether it is working. From now on database shows that it has been loading and I cannot see any tables it is grayed and it says loading. What would be the problem? When I checked the logs it has been copying to the secondary database and it doesn't show any error in the log-shipping monitor. It seem everything is cool accept this loading part. If some one help me I really appreciate it.
I am using SQL 2k EP Editions with SP2 on Win 2k Advance servers. Since more than week or so I am trying to establish log shipping between two servers. But its not working.
I am using database maintainence plan wizard to set up log shipping. Every thing works fine as far as wizard is concern, it creats plan for log shipping. But my log shipping is not working. The plan to back up log on source database is working fine. I can see the job history and the log files in the backup folder. But I have found that the job on the standby server to copy log file on network folder is failing and so the job to restore log on stand by server. I get the following message
"sqlmaint.exe failed with error state....."
Little reaserch on the standby server found that sql server is using maintainence plan to copy and restore log files, but i do not see any database maintainence plans on standby server as well as I have checked that there is no plan id in sysjobs table on either server.
I have sa rights. The account used by sql service and sql agent have admin rights and they do have rights to access the network folder for both the servers. So there is no rights problem.
I have followed all steps published in white paper for setting up log shipping on microsoft web site.
I have searched microsoft KB but it is of no use for sqlmaint.exe.
