Hi!
I download Microsoft SQL Server 2005 Enterprise Evaluation Edition (Self-extracting executables: X86 Executable ) from Microsoft site but when I try to unpack it the unpack program says it is corrupt. I have downloaded this file more than 5 times and still the same problem occurs. Is it only me or other has same problem? Any suggestsion?
Regards
I am download new Microsoft SQL Server 2005 Enterprise Evaluation Edition.. but how run it?
SQL Server Management is not enough!
Hello,
Am currently on holiday and mistakenly broke my laptop.
I have been searching MS website to download the 180 day trial of MS SQL 2005 (Microsoft SQL Server 2005 Enterprise Evaluation Edition)
http://www.microsoft.com/downloads/details.aspx?familyid=6931fa7f-c094-49a2-a050-2d07993566ec&displaylang=en
I have registered twice, but the download seems to be elusive
Any pointers pls
Thanks
Ehi
Dear all,
This VHD consists of 6 downloads of files. I have download it several times, but when it always has crc error when extracting part2's rar. Does anyone also encounter this problem? Is there any solution?
Thank you!
I am currently using SQL Server Enterprise Evaluation which runs out after 6months. When this happens or even sooner I plan to install SQL Server Developer.
My questions is can I copy all the things I develop (databases, cubes, reports,) from enterprise evaluation & import/load them into SQL Developer with no problems? Will everything integrate? Is there any implications?
This may be a stupid question, but can someone from MS SQL Server Team kind enough to confirm it, please?
View 3 Replies View RelatedI upgraded a MS SQL 2005 Enterprise Evaluation/Trial to MS SQL 2005 Standard Edition with 5 User CAL.
I used the following command to upgrade:
start /wait setup.exe ADDLOCAL=SQL_Engine INSTANCENAME=MSSQLSERVER UPGRADE=SQL_Engine SKUUPGRADE=1 PIDKEY=<mykey> /qb
Once complete, "select SERVERPROPERTY('LicenseType')" returns DISABLED, but I expected that it would return PER_SEAT.
Thankfully, after the upgrade it does show EDITION=Standard Edition.
Questions:
1. How do I verify the license installed is the Client Access License of 5?
-- SQL Server 2005 does not seem to have the same SQL Licence control panel as did SQL 2000. It is not listed under Control Panel -> Licensing (only thing listed is 'Windows Server') nor under Administrator Tools -> Licensing.
2. How do you add CALs or change license type in SQL 2005?
-- I was also puzzled that I was not asked during setup of the license mode and/or number of licenses ( I did not get this on a fresh install of SQL 2005 SE either ).
Thanks for any assistance you can provide.
Ajay
When I try to install SQL Server 2005 evaluation edition, I keep getting the message that SQL server setup has detected beta components of SQL Server 2005 or Visual Studio 2005 which must be uninstalled for setup to continue. I have removed all beta components like sql 2005 ctp, visual studio 2005 beta, etc from my computer and yet it keeps giving me this message.
PLease help!!!! I am unable to install SQL Server 2005 evaluation edition.
View 1 Replies View Related
I first tried installing the DVD and of course it told me I must use the command prompt installation method to include the line SKUUPGRADE=1. I found good references to this in the following links:
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=2208593&SiteID=1
http://msdn2.microsoft.com/en-us/library/ms144259.aspx
Below is the command I issued at the command prompt:
start /wait d:serverssetupsetup.exe ADDLOCAL=ALL INSTANCENAME=URHCS63SQL2005DSS UPGRADE=SQL_Engine SKUUPGRADE=1 /qb
My servername is URHCS63 and my instance is SQL2005DSS.
When I execute this command, a installation dialog box opens briefly and then disappears and nothing else happens. Here are the results of the bootstrap log file:
Microsoft SQL Server 2005 9.00.3042.00
==============================
OS Version : Microsoft Windows Server 2003 family, Enterprise Edition Service Pack 1 (Build 3790)
Time : Thu Oct 25 16:17:48 2007
URHCS63 : To change an existing instance of Microsoft SQL Server 2005 to a different edition of SQL Server 2005, you must run SQL Server 2005 Setup from the command prompt and include the SKUUPGRADE=1 parameter.
SQL Server Setup was interrupted. For more information, review the Setup log file in %ProgramFiles%Microsoft SQL Server90Setup BootstrapLOGSummary.txt.
Time : Thu Oct 25 16:20:08 2007
Any ideas on why this is not working for me?
Is it possible to connect SSRS running on SQL Server 2005 enterprise edition (our production system) to a database running on SQL Server 2005 Developer's edition (our test system)
thanks!
Hi all,
I have downloaded Microsoft SQL Server 2005 Enterprise Evaluation Edition ISO from the following site and burned it onto a DVD.
http://www.microsoft.com/downloads/details.aspx?FamilyId=6931FA7F-C094-49A2-A050-2D07993566EC&displaylang=en
Prior to this I have installed Visual Studio 2005 Professional Edtion. During setup I have selected all the native client components i.e. Management Studio, Business Intelligense Studio. But after the install I am not able to see them under All Programs-> Microsoft SQL Server 2005. On further searching I have come across this link
http://channel9.msdn.com/ShowPost.aspx?PostID=142941
First of all, there is no sqlrun_tools.msi under setup folder of the dvd. And also when I tried to change component from Add/Remove programs and following the instructions as specified on clicking Change Installed components all that I see are: Connectivity Components and Software Development kit.
Could someone tell me how can I install Management Studio/ Business Intelligence Studio seperately? I don't want to go through the process of re-installation.
We downloaded and installed the trial software of SQL Server 2005 Enterprise edition a month ago. We have purchased a fully licensed version of SQL Server 2005 Standard Edition and would like to apply the licensed version to our workstation clients since their SQL software will eventually expire. Our SQL Server is not an issue since we purchased a new Server and installed the new licensed version of SQL on it.
Is there an easy way to accomplish this or is an uninstall & reinstall of SQL on every workstation required?
Thanks,
ChrisB
Hi
-I have istalled sql server 2005 standard edition , I want to install sql server 2005 enterprise edition on the same machine.
Is it possible? I have Microsoft windows server 2003 SP2 and 1GB RAM.
I want to use partition function with the enterprise edition, will the trial version of sql server work for me?
-If I have already created a database and tables using the standard edition, will I be able to access and use the database using the installed trial version or will I have to start a fresh creating a new database?
- Is it possible to access the same database with any of the installed versions?
BTW, I am prety new to sql server and databases , I am trying to learn by myself
Thanks
Dear All,We have a database which contains many tables which have millions ofrecords. When We attach the database with MS SQL Server 2005 StandardEdition Server and run some queries (having joins, filters etc.) thenthey take very long time to execute while when We execute same querieson Enterprise Edition then they run 10 times faster than on standardedition.Our database does not use any features which are present in EnterpriseEdition and not present in Standard Edition. We want to know what arethe differences between Standard Edition and Enterprise Edition forperformance. Why should we go for Enterprise Edition when StandardEdition has all the features required.We are presently using evaluation versions of SQL Server 2005 Standardand Enterprise Editions.Thanks and regards,Nishant Sainihttp://www.simplyjava.com
View 23 Replies View RelatedI am attempting to upgrade a 2005 Standard Edtion to Enterprise Edition. This is a default instance. All components are upgraded successfully except the Database Engine. I receive the following error:
SQL Server Setup has encountered the following problem: [Microsoft][SQL Native Client][SQL Server]The certificate cannot be dropped because one or more entities are either signed or encrypted using it.. To continue, correct the problem, and then run SQL Server Setup again.
This installation does not have encryption enabled, so I do not undersand the error or how to correct it.
After rebooting the SQL instance appears to be upgraded to Enterprise, but it cannot be upgraded to SP2.
Thanks,
I just received my licensed disks for upgrading my SQL Server 2005 Evaluation version to a fully licensed version. Do I simply run the two disks over top of the evaluation version or is it a little bit more complicated? Any input would be greatly appreciated. A little new to SQL.
Thanx
Chad
We have an existing installation of SQL Server 2005 Developer Edition (64bit) that we are ready to go live with and would like to change the edition to Enterprise Edition (64bit). We have purchased all the appropriate licenses. We would like to avoid UN-installing the Developer Edition and RE-installing the Enterprise Edition. There must be some way to change a registry key, provide your serial number via a command line utility or re-run the setup with the license key provided and direct it to just change the edition from Developer to Enterprise and not change any of the other settings like service account, sa account, collation, etc. Any help is most appreciated.
Thank you,
Matt
Hi,
I would like to find out if there is any way to upgrade SQL Server 2000 (Ent) to 2005 (STD)
The Instance has many logins and jobs etc and I dont want to loose those
A document or some advice on how to go about it would help
Thanks
I'm try to upgrade SQL Server 2005 Evaluation with tuned up and worked merge replication.
- I'm insert disk with licensed SQL Server 2005 Enterprise, start installation - in process, indicate instance for installing, in list of options appears I see option "ugrade"
- All passes fine and go on:
After upgarde I'm get completely broken merge replication!
Moreover, such feeling that certain strange troubles with SQL Agent:
all points context menu in Replication Monotor - disabled and if I try to start replication manually through jobs - too failed - with some error "agent shutdown" !
I'm try to build "clear" situation: install in Virtual PC Windows 2003 Ent SP1, SQL 2005 Eval and setup my test replication and upgrade SQL Server to Enterprise version - and get same trouble too!!!
What the best way to uprade my evaluations sql servers with replication to licensed version SQL Ent?
Hi,
where can i see how many days are left until the SQL 2005 Evaluation Edition expires after 180 days?
Hello, How are you?
I have a problem when I try to create a new connection with Microsoft SQL Server 2005 Compact Edition from Visual Studio 2005 IDE. When I€™m going to choose the data source, the SQL Server 2005 Compact Edition provider doesn€™t appear in the list. I installed the SQL Server 2005 Compact Edition from this page http://www.microsoft.com/downloads/details.aspx?FamilyId=%2085E0C3CE-3FA1-453A-8CE9-AF6CA20946C3&displaylang=en. In the additional information says by installing SQLServerCE31-EN.msi installs the provider (System.Data.SqlServerCe.dll) in the GAC (global assembly cache) and registers the OLEDB provider (sqlceoledb30.dll). So, I don€™t understand why couldn€™t I create a new connection with Microsoft SQL Server 2005 Compact Edition from Visual Studio 2005 IDE?
I appreciate your help€¦
Working on some performance issues at the database end, our team observed, that the query execution done by SQL Server 2005 was done by using only one processor in our application. The stored procedures are written in T-SQL and have a dedicated Database Server, running SQL Server 2005.
Our tests lead to the following observations;
SQL Server 2005 Enterprise Edition was executing stored procedures using only 1 processor, when it is a multiple processor Server.
Apart from this the stored procedure execution is very linear.
We would like to have your suggestions on the same.
Regards,
Girish
if i upgrade from sql server 2005 expressto sql server 2005 enterprise can i do it ?
am i need to uninstall 2005 express before ?
Can somone tell me if this has the capabilities of importing and exporting data to and from excel?
View 1 Replies View RelatedHi All,
I have downloaded Microsoft Enterprise Library 2005 from microsoft.com. I am trying implement Data Access Layer with visual studio 2003. I am able to access some functions of the DAL but I am not able to establish connection with SQL Server 2000.
Will anyone tell me the solution for the above issue.
Thanks & Regards,
Bijay
Hello ,everyone.
I have tried to setup SQL Server 2005(Enterprise Edition) in my computer with the operation system of Windows XP(Home Edition). But I failed. It was shown that IIS is a necessary component.Why need IIS for Setuping SQL Server 2005(Enterprise Edition) ?
Thanks in advance!
Hi all,
I can't get SQL Server 2005 Enterprise Edition working on my notebook with Windows Vista Business Edition. I installed SQL Server 2005 Enterprise Edition and then i ran SP2 for SQL Server EE.
But now when i a am trying to connect to any server from SQL SERVER MANAGEMENT STUDIO i can't see any Server in Server Name list. When I click on Browse for more, I don't see any server. I am able to get Network servers.
While installing the SQL SERVER all the features were disabled as it is, then i went to advanced and selected all the options.
Any suggestions are apperiacted in advance.
Regards,
Syed Abbas Naqvi
Sr. Software Developer.
I recently (yesterday) installed a fresh copy of Windows XP with Service Pack 2 applied.
I proceeded with Visual Studio 2005 Express Editions installation straight away.
But I cannot install Microsoft SQL Server 2005 Express Edition x86.
I choose to install Microsoft SQL Server 2005 Express Edition x86 component along with every component of visual studio but it simply would not install.
In the end, after the installation of each complete is complete, I simply get an error message saying that Microsoft SQL Server 2005 Express Edition x86 failed to install.
What is the problem?
Hi Dudes,
I need a clean link for MSSQL Server 2005 Enterprise Edition download except Microsoft site. I already downloaded from it, burned the downloaded image, but the problem is that sql.cab and some other cab files got corrupted and some components became unable to install. I tried and installed it without some components. So anybody can help me in getting a proper link.
And one more thing, i downloaded from the microsoft site itself with file size around 890MB. So give me link which works 100% or those who have tried and got 100% result.
Thanx,
BP.
ok, I've installed sql server, run the install samples and database, but when I go into SQL Server, the database and samples are not there. How do I connect the two?
thx,
Kat
Hi all,
I am new to SQL server. I just installed SQL Server 2005 enterprise edition .
I have not more experience in SQL but I need some tutorial about how to use SQL Server 2005 and create tables and make queries and relate tables . I can't find any exact location in Microsoft website about SQL Server enterprise edition and documentation where i can find beginner's resources. which feature we use for creating the tables and other features for making the database.
Can anyone please give me the location.
Thanks
Hi all,
I am new to SQL server. I just installed SQL Server 2005 enterprise edition .
I have not more experience in SQL but I need some tutorial about how to use SQL Server 2005 and create tables and make queries and relate tables . I can't find any exact location in Microsoft website about SQL Server enterprise edition and documentation where i can find beginner's resources. which feature we use for creating the tables and other features for making the database.
Can anyone please give me the location.
Thanks