I have been struggling over the following problem for a few days... i was wondering if anyone could shed some light...!
I have the following query:
SELECT Field1, Field2
FROM Table1 INNER JOIN Table2 ON Table1.ID = Table2.ID
WHERE Table2.Field1 = ( SELECT TOP 1 Field1 FROM Table2 WHERE Field3='X' ORDER BY Date1)
AND Table2.Field2 = ( SELECT TOP 1 Field2 FROM Table2 WHERE Field3='X' ORDER BY Date1)
Is there a better way to do this. I was thinking of something very similar to the below query (Which doesnt work):
SELECT *
FROM Table1 A
INNER JOIN Table2 B ON (A.ID=B.ID)
INNER JOIN ( SELECT TOP 1 * FROM Table2 WHERE Field3='X' ORDER BY Date1 ) C ON (A.ID=C.ID)
WHERE
B.Field1 = C.Field1
B.Field2 = C.Field1
Hey guys i have a stock table and a stock type table and what i would like to do is say for every different piece of stock find out how many are available The two tables are like thisstockIDconsumableIDstockAvailableconsumableIDconsumableName So i want to,Select every consumableName in my table and then group all the stock by the consumable ID with some form of total where stockavailable = 1I should then end up with a table like thisEpson T001 - Available 6Epson T002 - Available 0Epson T003 - Available 4If anyone can help me i would be very appreciative. If you want excact table names etc then i can put that here but for now i thought i would ask how you would do it and then give it a go myself.ThanksMatt
I'd appreciate some help with the issue below - my SQL is a bit rusty and was never that hot to be frank. I'm using SQL Server 2000 (although have a test box with 2005 Express also). I've trawled MSDN and a few forums but can't find the solution (maybe I don't know what I'mm looking for!), so any help would be marvellous...
I have a table with a field called 'IRV' containing a string of comma-separated values. I want to be able to query a point in that string and count the number of times a given value appears. So...as an example, I want to count how many times '1' appears at position 7 in the IRV. I can create SQL to do this as follows:
SELECT COUNT(X) AS is1 FROM myIRVtable WHERE (SUBSTRING(IRV, 7, 1) = '1')
So far so good. However, it is also possible that the value at position 7 in this string could be '2' (or '3', or '4', etc) - and rather than re-running the query again and again to get these values, I'd like to do it in one hit.
How can I combine all this together - anyone have any brilliant solutions?
What's worng, please help? SELECT TTarea,personel,Date FROM person_table WHERE TTarea = (SELECT TTarea FROM TTarea_table WHERE Center='CENTER_office') I have many TTarea and I want to send back from inner SELECT statement but give an error that inner select statement don't return many result.I want to return many result and I display many TTarea in the CENTER_office
SELECT Tbl_Region.REGION, [NEW_HMO_CONTRACTS].[# of New Members] AS [HMO NEW CONTRACTS], [NEW_HMO_MEMBERS].[# of New Members] AS [HMO NEW MEMBERS], [TERMED_HMO_CONTRACTS].[# of Termed Contracts] AS [HMO TERMED CONTRACTS], [TERMED_HMO_MEMBERS].[# of Termed Members] AS [HMO TERMED MEMBERS] FROM (((Tbl_Region LEFT JOIN [SELECT qry_New_Members_HMO_All_Regions_1.Reg, Count(qry_New_Members_HMO_All_Regions_1.CONTRACT_N UM) AS [# of New Members] FROM (SELECT tbl_hmo.Reg, tbl_hmo.CONTRACT_NUM FROM tbl_hmo LEFT JOIN tbl_hmo_History ON tbl_hmo.CONTRACT_NUM = tbl_hmo_History.CONTRACT_NUM WHERE (((tbl_hmo_History.CONTRACT_NUM) Is Null)) GROUP BY tbl_hmo.reg, tbl_hmo.CONTRACT_NUM
) AS qry_New_Members_HMO_All_Regions_1
GROUP BY qry_New_Members_HMO_All_Regions_1.reg ) AS NEW_HMO_CONTRACTS ON Tbl_Region.REGION = [NEW_HMO_CONTRACTS].reg) LEFT JOIN (SELECT qry_New_Members_HMO_All_Regions_1.reg, Count(qry_New_Members_HMO_All_Regions_1.MEMBER_NUM ) AS [# of New Members] FROM (SELECT tbl_hmo.reg, tbl_hmo.MEMBER_NUM FROM tbl_hmo LEFT JOIN tbl_hmo_History ON tbl_hmo.MEMBER_NUM = tbl_hmo_History.MEMBER_NUM WHERE (((tbl_hmo_History.MEMBER_NUM) Is Null)) GROUP BY tbl_hmo.Aff_Area, tbl_hmo.MEMBER_NUM
) AS qry_New_Members_HMO_All_Regions_1 GROUP BY qry_New_Members_HMO_All_Regions_1.reg) AS 4_NEW_HMO_MEMBERS ON Tbl_Region.REGION = [4_NEW_HMO_MEMBERS].reg) LEFT JOIN (SELECT qry_Termed_Contracts_HMO_All_Regions_1.reg, Count(qry_Termed_Contracts_HMO_All_Regions_1.CONTR ACT_NUM) AS [# of Termed Contracts] FROM (SELECT tbl_hmo_History.reg, tbl_hmo_History.CONTRACT_NUM FROM tbl_hmo RIGHT JOIN tbl_hmo_History ON tbl_hmo.CONTRACT_NUM = tbl_hmo_History.CONTRACT_NUM WHERE (((tbl_hmo.CONTRACT_NUM) Is Null)) GROUP BY tbl_hmo_History.reg, tbl_hmo_History.CONTRACT_NUM ) AS qry_Termed_Contracts_HMO_All_Regions_1 GROUP BY qry_Termed_Contracts_HMO_All_Regions_1.reg) AS TERMED_HMO_CONTRACTS ON Tbl_Region.REGION = [TERMED_HMO_CONTRACTS].reg) LEFT JOIN (SELECT qry_Termed_Members_HMO_All_Regions_1.reg, Count(qry_Termed_Members_HMO_All_Regions_1.MEMBER_ NUM) AS [# of Termed Members] FROM (SELECT tbl_hmo_History.reg, tbl_hmo_History.MEMBER_NUM FROM tbl_hmo RIGHT JOIN tbl_hmo_History ON tbl_hmo.MEMBER_NUM = tbl_hmo_History.MEMBER_NUM WHERE (((tbl_hmo.MEMBER_NUM) Is Null)) GROUP BY tbl_hmo_History.reg, tbl_hmo_History.MEMBER_NUM ) AS qry_Termed_Members_HMO_All_Regions_1 GROUP BY qry_Termed_Members_HMO_All_Regions_1.reg) AS TERMED_HMO_MEMBERS ON Tbl_Region.REGION = [TERMED_HMO_MEMBERS].reg;
error: Server: Msg 156, Level 15, State 1, Line 3 Incorrect syntax near the keyword 'FROM'. Server: Msg 156, Level 15, State 1, Line 8 Incorrect syntax near the keyword 'AS'. Server: Msg 156, Level 15, State 1, Line 18 Incorrect syntax near the keyword 'AS'. Server: Msg 156, Level 15, State 1, Line 24 Incorrect syntax near the keyword 'AS'. Server: Msg 156, Level 15, State 1, Line 31 Incorrect syntax near the keyword 'AS'.
I am trying to get some functionality from nested IF's witin a SQL Select Statement. I do not want to create a stored procedure as I have another program that must use select statements that I will be using once I have this query written. Below is my code.
SELECT Sales.OrderID, Buyers.Userid, Buyers.Email, Sales.ShippingCo, IF (Addresses.Company IS NULL OR Addresses.Company = '') BEGIN IF ( RTRIM(LTRIM(Addresses.FirstName)) IS NULL RTRIM(LTRIM(Adresses.LastName)) AS CompanyOrName, ELSE RTRIM(LTRIM(Addresses.FirstName)) & ' ' & RTRIM(LTRIM(Adresses.LastName)) AS CompanyOrName, END ELSE Addresses.Company AS CompanyOrName, END
All I am trying to do is join the first and last names as the company in my table if the company doesn't exist, and then only display the last name if the first name is null.
I keep getting the error "Msg 156, Level 15, State 1, Line 6 Incorrect syntax near the keyword 'IF'."
I know I am close to geting this to work, but for some reason googling for tutorials on writing IF statements isn't helping out.
Thanks ahead of time for any help. It will be greatly appreciated.
Hi all,I have the following databasedesign :www.marinescu.dk/databasedesign.pdfwhich i have a nested SELECT on but i need some more information which idon't know how to retrieve. I have the following SELECT :SELECT DISTINCT Resource.ResourceID, Localized.ResourceValue,Localized.Font, Resource.ResourceName, Resource.Comment, Type.TypeName FROMLocalized, Resource,Type WHERE Localized.ResourceID = Resource.ResourceIDAND Resource.TypeID = Type.TypeID ORDER BY Resource.ResourceIDFor some Resources there are Rules. I will like to have a new column namedRulesText in my query where there will be shown the RuleText if there is anyfor that particular Resource.Could anybody help me here ????Best RegardsMihai Marinescu
I need to pass 3 column values and one Formula string into 4 replace statements and output the result in one column.
Nesting them in the usual way doesn't seem to work as that only allows for one column.
My table consits of four columns...PF (numeric), Hours (numeric), TotalNumber INT, and Formula (nvatchar)
My function needs to search and replace the Formula column for instances of all the three number columns and output the formula as a mathmatical formula rather than a string.
Here is what I have so far which works fine if all three columns have a value, but if only one is null then it will retrun NULL and not the other two values.
FUNCTION GetFormula (@numPF NUMERIC(10,2), @numHours NUMERIC(10,2), @intTotalNumber INT, @strFormula nvarChar(200)) RETURNS nvarchar(200) AS BEGIN DECLARE @strExpression nvarchar(200)
My multiple level nested corelated query is not fetching correctresult. It work fine on small set of data, but fails on larger set ofdata. Any clue?Explaining data storing and discussing design would be tough for mehere, still to show you how complex I have created my life, here is thequery:select(SELECT Top 1 RowNSBranchID FROM AssoExtBranchToNSBranchMstM AM-- MMMWHERE AM.RowExtSysID IN(SELECT RowID FROM ExternalSystemMstM WHERE ExtSysID =(SELECT ExtSysID FROM ExternalSystemMstM WHERE SF = 'Active' ANDRowID =(SELECT MAX(RowID) FROM ExternalSystemMstM WHERE MCStatus = 2 ANDExtSysCode = UM.SystemCode)))AND RowExtBranchID IN(SELECT RowID FROM ExternalBranchMstMWHERE ExtBranchID =(SELECT ExtBranchID FROM ExternalBranchMstMWHERE ROWID =(SELECT RowID FROM ExternalBranchMstMWHERE ROWID =(SELECT MAX(ROWID) FROM ExternalBranchMstM WHERE MCStatus = 2 ANDExtBranchCode = UM.UpBranchCodeAND RowExtSysID IN(SELECT RowID FROM ExternalSystemMstM WHERE ExtSysID =(SELECT ExtSysID FROM ExternalSystemMstM WHERE SF = 'Active' ANDRowID =(SELECT MAX(RowID) FROM ExternalSystemMstM WHERE MCStatus = 2AND ExtSysCode = UM.SystemCode))))AND (SF = 'Active'))))AND AM.SF = 'Active'order by AssoID desc,TrackID desc) nsbranchid, UM.*fromTmpInProcessData062005MstM UM
HI All, I have what is most likely a simple MS SQL query problem (2005).I need to add two computed columns to a result set, both of those columns are required to provide the count of a query that contains a parmamter. (The id of a row in the result set) 3 Tables (Showing only the keys)t_Sessions-> SessionID (Unique) t_SessionActivity-> SessionID (*)-> ErrorID (Unique) t_SessionErrors-> ErrorID (1) I need to return something like (Be warned the following is garbage, hopefully you can decifer my ramblings and suggest how this can actualy be done) SELECT SessionID, (SELECT COUNT(1) AS "Activities" FROM t_SessionActivity WHERE t_SessionActivity.SessionID = t_Sessions.SessionID), (SELECT COUNT(1) AS "Errors" FROM dbo.t_Sessions INNER JOIN dbo.t_SessionActivity ON dbo.t_Sessions.SessionID = dbo.t_SessionActivity.SessionID INNER JOIN dbo.t_SessionErrors ON dbo.t_SessionActivity.ErrorID = dbo.t_SessionErrors.ErrorID WHERE t_SessionActivity.SessionID = t_Sessions.SessionID)FROM t_Sessions Any help greatfully received. Thanks
I need help nesting select statements. Here's what I'm trying to do:
select (select e.emp_name_lf as employee, e.emp_id from employee e, install_payroll_detail ipd where e.emp_id = ipd.emplno) e.emp_name_lf as username from employee e, install_payroll_master ipm where e.emp_id = ipm.entered_by
I just want one row with both the employee and username, however I cannot get the syntax. Any help is greatly appreciated.
1)table of customers: CustomerName, CustomerId, CustomerAddress 2)table of orders: OrderId, CustomerId, OrderAmount
I would like to have a query that returns everything from the customer table and add one column that has the amount of orders the customer has made, this is what I have so far:
CREATE PROCEDURE dbo.GetAllCutomerInfo AS
DECLARE @OrderCount int
SELECT CustomerName, CustomerId, CustomerAddress, (SELECT COUNT(OrderId) FROM Cust_Orders WHERE CustomerId= CustomerId) FROM Customers ORDER BY CustomerName
Can you add a variable:
CREATE PROCEDURE dbo.GetAllCutomerInfo AS
DECLARE @CustID int
DECLARE @OrderCount int
SELECT CustomerName, @CustID=CustomerId, CustomerAddress, (SELECT COUNT(OrderId) FROM Cust_Orders WHERE CustomerId= @CustID) FROM Customers ORDER BY CustomerName
I am using Server 2012 and very new to SQL. I have a request from a physician for a list of his patients that meet a criteria. This is stored in a temp table names #cohort.
Using this cohort he wants each row to be one patient with a list of labs, vitals, etc. Three items are the most recent lab value and date. I could query each lab individually and place it into a temp table and then join all temp tables at the end, but I am trying to move past that and have all labs in one temp table. All temp tables are joined with PatientSID.
I tried to do something for just 2 labs, but it is not working. There could be nulls values when joined with the #cohort table.
Individually the SELECT statements pull in the most recent lab value and date, but I cannot get them into a temp table with one row of PatientSID and then the lab value and date if they exist.
IF OBJECT_ID ('TEMPDB..#lab') IS NOT NULL DROP TABLE #lab SELECT cohort.PatientSID ,SubQuery1.LabChemResultNumericValueAS 'A1c%' ,SubQuery1.LabChemCompleteDateTimeAS 'A1c% Date' ,SubQuery2.LabChemResultNumericValueAS 'LDL'
Hi,I'm having problems constructing a nested join. It's quite complex, sohere's a simplfied example of the problem. Any thoughts on what I'mdoig wrong - or if I've got the whole approach wrong are welcome.I've two tables :-one is a contact table contacting name, addresses etc. Three of thefields represent users - 'created by', 'last modified by' and 'owner'.They contain usernames - eg. JDOE, BSMITH etc.The other table contants usernames and new ID codes.What I want to do is create a new dataset by joining the contacts tablewith the user table on all three fields - so the new dataset containsthe ids for the creator, last modifier and owner.I've tried things similar to:select c.*, u1.id, u2,id, u3.idfrom contact cleft outer join users u1left outer join users u2left outer join users u3on (u3.username = c.owner)on (u2.username = c.modified)on (u1.username = c.creator )But it compains that"The column prefix 'c' does not match with a table name or alias nameused in the query."The problem is referencing c (contact) through the whole set of joins.I would like to do this in some similar format as the query is within acursor and post-processing would be very long-winded.Thanks
Am new to sql, and I wold appreciate help with optimising the folloing example. The result of the example should be to list a result with details of the Column names:
OPBal| Receipt| IssTrns| Transfer| ClBal
SELECT dbo.inventory.location, dbo.inventory.itemnum, (select sum(dbo.matrectrans.linecost) where dbo.matrectrans.issuetype LIKE 'RECEIPT' ) As Receipt, ( select sum(dbo.matrectrans.linecost)where dbo.matrectrans.issuetype LIKE 'TRANSFER' ) As Transfer, ( select(dbo.IST_ITEMDETAIL.curbal*dbo.IST_ITEMDETAIL.avgcost)where dbo.IST_ITEMDETAIL.logdate='2006-07-20' ) As OpBal, ( select (IST_ITEMDETAIL.curbal*IST_ITEMDETAIL.avgcost)where IST_ITEMDETAIL.logdate='2006-08-21' ) As ClBal, ( sum(matusetrans.linecost) ) As IssTrnf FROM dbo.matrectrans, dbo.matusetrans, dbo.IST_ITEMDETAIL , ( dbo.inventory inner JOIN dbo.item ON dbo.inventory.itemnum = dbo.item.itemnum AND dbo.inventory.orgid = dbo.item.orgid )
WHERE dbo.inventory.location = dbo.matusetrans.storeloc AND dbo.inventory.itemnum = dbo.matrectrans.itemnum AND dbo.inventory.siteid = dbo.matrectrans.siteid
OR dbo.inventory.location = dbo.matrectrans.tostoreloc AND dbo.inventory.itemnum = dbo.matusetrans.itemnum AND dbo.inventory.siteid = dbo.matusetrans.siteid OR dbo.inventory.location = dbo.matrectrans.fromstoreloc
OR dbo.inventory.location = dbo.ist_itemdetail.location AND dbo.inventory.itemnum = dbo.ist_itemdetail.itemnum GROUP BY dbo.inventory.location, dbo.inventory.itemnum,dbo.matrectrans.issuetype,(dbo.IST_ITEMDETAIL.curbal*dbo.IST_ITEMDETAIL.avgcost), dbo.IST_ITEMDETAIL.logdate,dbo.IST_ITEMDETAIL.curbal,dbo.IST_ITEMDETAIL.avgcost
hi all, i have speed issue on displaying 4k line of records using temp table.. before this it works fine and fast.. but maybe when i starts joining group by it loads slower.
SELECT DISTINCT customlotno, itemid, ItemName, Ownership, TotalCTNInPlt, TotalCarton, sum(CartonPcs) AS CartonPcs, StorageID, StorageStatus ,OriginUOM, PickQtyUOM, WhsID, WhsName, LocID, Zone, Expirydate, recvDate INTO #ByItemID FROM ( SELECT * FROM tblItemdetail )AS L1 GROUP BY customlotno, itemid, ItemName, ownership, TotalCTNInPlt, TotalCarton, StorageID, StorageStatus ,OriginUOM, PickQtyUOM, WhsID, WhsName, LocID, Zone, Expirydate, recvDate
SELECT * FROM #ByItemID ORDER BY CustomLotNo
DROP TABLE #ByItemID
---------------------------- or maybe just use something like nested SELECT like this, but cannot work:-
select customlotno, itemid, locid(
select * from tblitemdetail where customlotno='IN28606000'
In a SQL db we have we get the following error when just doing a simple select query against the view. Msg 217, Level 16, State 1...Maximum stored procedure, function, trigger, or view nesting level exceeded (limit 32).
No changes have been made to triggers or stored procedures recently and all was good prior to that.I understand that if my triggers loop this error will occur. But the select query does not fire any triggers functions or any other items. and the select worked with no issues last week.
I have nested a Stored Procedure within a stored procedure. The nested stored procedure ends in a select statement. What I'd like to do is either capture the results of the select statement (it will be 1 row with 3 columns, I only need the contents of first column), or suppress the select statement from displaying in the final results of the Stored Procedure it is nested in.
hey there, i'm trying to move one record from one table to the next,so i'm doing this by doing an insert into table, then delete from theprevious table. Only thin g is on the insert i want to include aparameter. Can't work how to do this. Do you think i need to doanother update query and insert the parameter that way, after theinsert is done?ALTER PROCEDURE dbo.ReturnLoan(@strBarcode varchar(100),@strLibrary varchar(100),@dateReturned datetime)ASINSERT INTO Loan_History(Barcode,UserID,Date_Borrowed,Library)Select Barcode, UserID, Date_Borrowed, Library FROM Loans WHEREBarcode = @strBarcodeAND Library = @strLibrary;DELETE FROM LoansWHERE Barcode = @strBarcodeAND Library = @strLibrary ;RETURN
So I have another query I can't seem to function the way I was hoping. I've learned a lot in this past month or so but I've hit another challenge. Anyways what I'm trying to do is when a user/student wants to add a new major I want to show a list of majors that are NOT already in his/her profile. So basically if I had a full list of majors: Accounting Computer Science Mathematics
and the user already had Mathematics in his/her profile I'd like it to display only:
Accounting Mathematics
Below is the layout of the tables, my attempt at the query, and then below that some example data.
Code Snippet
USE [C:COLLEGE ACADEMIC TRACKERCOLLEGE ACADEMIC TRACKERCOLLEGE.MDF] GO /****** Object: Table [dbo].[Majors] Script Date: 04/17/2008 22:38:06 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO SET ANSI_PADDING ON GO CREATE TABLE [dbo].[Majors]( [MajorID] [varchar](50) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL, CONSTRAINT [PK_Majors] PRIMARY KEY CLUSTERED ( [MajorID] ASC )WITH (PAD_INDEX = OFF, IGNORE_DUP_KEY = OFF) ON [PRIMARY] ) ON [PRIMARY]
GO SET ANSI_PADDING OFF
USE [C:COLLEGE ACADEMIC TRACKERCOLLEGE ACADEMIC TRACKERCOLLEGE.MDF] GO /****** Object: Table [dbo].[MajorDisciplines] Script Date: 04/17/2008 22:38:16 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO SET ANSI_PADDING ON GO CREATE TABLE [dbo].[MajorDisciplines]( [MajorDisciplineID] [int] IDENTITY(0,1) NOT NULL, [DegreeID] [varchar](50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL, [MajorID] [varchar](50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL, [DisciplineName] [varchar](50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL, [Description] [text] COLLATE SQL_Latin1_General_CP1_CI_AS NULL, [Criteria] [text] COLLATE SQL_Latin1_General_CP1_CI_AS NULL, CONSTRAINT [PK_MajorDiscipline] PRIMARY KEY CLUSTERED ( [MajorDisciplineID] ASC )WITH (PAD_INDEX = OFF, IGNORE_DUP_KEY = OFF) ON [PRIMARY] ) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
GO SET ANSI_PADDING OFF GO ALTER TABLE [dbo].[MajorDisciplines] WITH CHECK ADD CONSTRAINT [FK_MajorDiscipline_DegreeID] FOREIGN KEY([DegreeID]) REFERENCES [dbo].[Degree] ([DegreeID]) GO ALTER TABLE [dbo].[MajorDisciplines] CHECK CONSTRAINT [FK_MajorDiscipline_DegreeID] GO ALTER TABLE [dbo].[MajorDisciplines] WITH CHECK ADD CONSTRAINT [FK_MajorDiscipline_MajorID] FOREIGN KEY([MajorID]) REFERENCES [dbo].[Majors] ([MajorID]) GO ALTER TABLE [dbo].[MajorDisciplines] CHECK CONSTRAINT [FK_MajorDiscipline_MajorID]
USE [C:COLLEGE ACADEMIC TRACKERCOLLEGE ACADEMIC TRACKERCOLLEGE.MDF] GO /****** Object: Table [dbo].[MajorDisciplines] Script Date: 04/17/2008 22:38:16 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO SET ANSI_PADDING ON GO CREATE TABLE [dbo].[MajorDisciplines]( [MajorDisciplineID] [int] IDENTITY(0,1) NOT NULL, [DegreeID] [varchar](50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL, [MajorID] [varchar](50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL, [DisciplineName] [varchar](50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL, [Description] [text] COLLATE SQL_Latin1_General_CP1_CI_AS NULL, [Criteria] [text] COLLATE SQL_Latin1_General_CP1_CI_AS NULL, CONSTRAINT [PK_MajorDiscipline] PRIMARY KEY CLUSTERED ( [MajorDisciplineID] ASC )WITH (PAD_INDEX = OFF, IGNORE_DUP_KEY = OFF) ON [PRIMARY] ) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
GO SET ANSI_PADDING OFF GO ALTER TABLE [dbo].[MajorDisciplines] WITH CHECK ADD CONSTRAINT [FK_MajorDiscipline_DegreeID] FOREIGN KEY([DegreeID]) REFERENCES [dbo].[Degree] ([DegreeID]) GO ALTER TABLE [dbo].[MajorDisciplines] CHECK CONSTRAINT [FK_MajorDiscipline_DegreeID] GO ALTER TABLE [dbo].[MajorDisciplines] WITH CHECK ADD CONSTRAINT [FK_MajorDiscipline_MajorID] FOREIGN KEY([MajorID]) REFERENCES [dbo].[Majors] ([MajorID]) GO ALTER TABLE [dbo].[MajorDisciplines] CHECK CONSTRAINT [FK_MajorDiscipline_MajorID]
SELECT MajorID FROM Majors majs WHERE majs.MajorID NOT IN (SELECT majDis.MajorID FROM MajorDisciplines majDis WHERE majDis.MajorDisciplineID NOT IN (SELECT sMajors.MajorDisciplineID FROM Student_Majors sMajors WHERE sMajors.StudentID = 0)) dbo.Majors MajorID Accounting Computer Science Mathematics
Oh also for the MajorIDs I don't want it to return duplicates such as the Accounting in MajorDisciplines...which I was hoping my query wouldn't do but it returns absolutely random data...
I need to perform an update where there are multiple scenarios which determine the value that is entered. Below is a sort've psuedo code of how it needs to be.
Update MyTable SET MyColumn = CASE WHEN MyCol1 = 'Value1' Then NewValue Else WHEN MyCol1 <> 'Value1' And MyCol2 = 'Active' Then 'Value1'
In the scenario where MyCol1 <> Value1 and MyCol2 <> 'Active' then no update would occur and the original value would remain intact.
I hope I'm posting this in the correct forum. If not I apologize. I have a nested select query that I imported from Oracle:
Oracle Version:
Code Snippetselect avg(days) as days from ( select dm_number, max(dm_closedate) - max(comment_closed_date) as days from dm_data where dm_type = 'prime' and dm_closedate <= '31-dec-2007' and dm_closedate >= '1-dec-2007' and program = 'aads' group by dm_number)
SQL Version:
select round(abs(avg(days)), 0) as days from (select dm.dm_number, abs(datediff(DAY,max(dm.dm_closedate), max(dm.comment_closed_date))) as days from dm_data dm, ProgramXref px where px.Program_Name = 'aads' and dm.Program_Id = px.Program_Id and dm.dm_type = 'prime' and dm.dm_closedate <= '31-dec-2007' and dm.dm_closedate >= '1-dec-2007' group by dm.dm_number)
In Oracle the query runs fine. In SQL I am getting a "Line 10: Incorrect syntax near ')'." error. If I run just the nested portion of the query, there are no errors. It only happens when the first query tries to query the nested query. Can anyone help me get the syntax correct?
I am calling stored procedure called GetCommonItemCount within another stored procedure called CheckBoxAvailability, the first stored procedure should return a count to second stored procedure and based on that some logic will be executed.
I have 2 problems in that
1. The result is not coming from first stored so the variable called @Cnt is always 0 although it should be 18 2. At the end i need to see in the output the result from second stored procedure only while now i am seeing multiple results of record sets coming.
I have attached the scripts also, the line i described in step1 is
OK heres the situation, I have a Categories table and a Products table, each Category can have one or many Products, but a product can only belong to one Category hence one-to-many relationship.
Now I want to do a SELECT query that outputs all of the Categories onto an ASP page, but also displays how many Products are in each category eg.
CatID | Name | Description | No. Products
0001 | Cars | Blah blah blah | 5
etc etc
At the moment I'm doing nesting in my application logic so that for each category that is displayed, another query is run that returns the number of products for that particular category. It works ok!
However, is there a way to write a SQL Statement that returns all the Categories AND number products from just the one SELECT statement, rather than with the method I'm using outlined above? The reason I'm asking is that I want to be able to order by the number of products for each category and my method doesn't allow me to do this.
I've only been doing sql 2005 for a couple of months with minimal training so there's a lot I don't know. What I'm trying to do is load a nested table (industry & customer totals) based on a value from the table it's nested in. This is the relationship of the data. I have at the highest group, an industry code, then a customer, then the part and then the fiscal year. What I'm trying to accomplish is to get a group total (footer) for the (1) industry code and (2) the customer code. This footer would contain the fiscal years (ascending) and their monthly totals. I would like to take the industry code from table one and pass it to the select statement in the dataset that feeds the nested table. I've read this is not possible to load a dataset field into a parm but I've seen where some people know how to work around this. If you reply, please explain in simple terms. Thanks!
industry Customer Year OCT NOV DEC 001 - Signposts M12345 Part 1 2006 5 6 2 2007 0 3 1
I have a problem where my users complain that a select statement takes too long, at 90 seconds, to read 120 records out of a database. The select statement reads from 9 tables three of which contain 1000000 records, the others contain between 100 and 250000 records. I have checked that each column in the joins are indexed - they are (but some of them are clustered indexes, not unclustered). I have run the SQL Profiler trace from the run of the query through the "Database Engine Tuning Advisor". That just suggested two statistics items which I added (no benefit) and two indexes for tables that are not involved at all in the query (I didn't add these). I also ran the query through the Query window in SSMS with "Include Actual Execution Plan" enabled. This showed that all the execution time was being taken up by searches of the clustered indexes. I have tried running the select with just three tables involved, and it completes fast. I added a fourth and it took 7 seconds. However there was no WHERE clause for the fourth table, so I got a cartesian product which might have explained the problem. So my question is: Is it normal for such a type of read query to take 90 seconds to complete? Is there anything I could do to speed it up. Any other thoughts? Thanks
I was wondering if it's possible to have a stored procedure that has two(or more) select statements which you can combine as a single result set.I am not able to use union as my select returns different number of columns.My selects are like this,This example is using only two table but i can have more then 2 tables in situation..ELECT SUM(col1) AS sumcol1FROM tbl1WHERE (ID = @para1') SELECT SUM(col1) AS sumcol1, SUM(col2) AS sumcol2, SUM(col3) AS sumcol3, SUM(col4) AS sumcol1FROM tbl2WHERE (id = @para1).thanks
In my report i have a paremeter which is a dropdown list showing alla available values.Now i want to select multiple values.The parameter is not multi valued.
Multiple select in Parameters Is fixed in Sqlserver reporting services 2005.
Iam using 2005 version,But i can't able to select multiple values by holding Ctrl key.How to achieve this.If we able to select the multiple values,In wgich format the selected value is passed to the Stored Procedure,It is same the way as selecting multiple values from Multi valued Parameter.
Hi there,I want to select records from 3 tables. In SQL Server 2005, I'm using of "For XML" like this:Select *, (Select * From dbo.PageModules Where (PageId = 1) For Xml Auto) As Modules, (Select * From dbo.PageRoles Where (PageId = 1) For Xml Auto) As Roles From dbo.PagesThat works fine in SQL 2005 but not in SQL 2000, Because SQL 2000 does not support nested "FOR XML".Is there any way for selecting records from multiple tables by a query?Thanks in advance
how can take codes below and put them into one store procedure to supplie a gridview. also i will like to define the row name on the left like i did to the column on the top using the 'AS' Code1.... SELECT SUM(CASE WHEN Month = 'January' THEN 1 ELSE 0 END) AS January, SUM(CASE WHEN Month = 'February' THEN 1 ELSE 0 END) AS February, SUM(CASE WHEN Month = 'March' THEN 1 ELSE 0 END) AS March, SUM(CASE WHEN Month = 'April' THEN 1 ELSE 0 END) AS April, SUM(CASE WHEN Month = 'May' THEN 1 ELSE 0 END) AS May, SUM(CASE WHEN Month = 'June' THEN 1 ELSE 0 END) AS June, SUM(CASE WHEN Month = 'July' THEN 1 ELSE 0 END) AS July, SUM(CASE WHEN Month = 'August' THEN 1 ELSE 0 END) AS August, SUM(CASE WHEN Month = 'September' THEN 1 ELSE 0 END) AS September, SUM(CASE WHEN Month = 'October' THEN 1 ELSE 0 END) AS October, SUM(CASE WHEN Month = 'November' THEN 1 ELSE 0 END) AS November, SUM(CASE WHEN Month = 'December' THEN 1 ELSE 0 END) AS December, SUM(CASE WHEN site_descr = 'SITE1' THEN 1 ELSE 0 END) AS AllTotal FROM dbo.V_results WHERE (site_descr = 'SITE1')
Code2.....
SELECT SUM(CASE WHEN Month = 'January' THEN 1 ELSE 0 END) AS January, SUM(CASE WHEN Month = 'February' THEN 1 ELSE 0 END) AS February, SUM(CASE WHEN Month = 'March' THEN 1 ELSE 0 END) AS March, SUM(CASE WHEN Month = 'April' THEN 1 ELSE 0 END) AS April, SUM(CASE WHEN Month = 'May' THEN 1 ELSE 0 END) AS May, SUM(CASE WHEN Month = 'June' THEN 1 ELSE 0 END) AS June, SUM(CASE WHEN Month = 'July' THEN 1 ELSE 0 END) AS July, SUM(CASE WHEN Month = 'August' THEN 1 ELSE 0 END) AS August, SUM(CASE WHEN Month = 'September' THEN 1 ELSE 0 END) AS September, SUM(CASE WHEN Month = 'October' THEN 1 ELSE 0 END) AS October, SUM(CASE WHEN Month = 'November' THEN 1 ELSE 0 END) AS November, SUM(CASE WHEN Month = 'December' THEN 1 ELSE 0 END) AS December, SUM(CASE WHEN site_descr = 'SITE2' THEN 1 ELSE 0 END) AS AllTotal FROM dbo.V_results WHERE (site_descr = 'SITE2')
