PRINT 1/(1+26)=0?
Nov 20, 2006Why does this T-SQL round incorrectly?
PRINT 1/(1+26)
when it should be 0.037037037?
Thanks,
Michael
ADVERTISEMENT
Print Barcodes With The Active X Print Control
Mar 2, 2007We are having problems printing Reports (when printing by clicking on the AcitiveX print control), where the font for the fields are set to "C39HrP24DhTt" (barcode).
While viewing the report it displays as Barcodes but while printing, the Barcode does not get printed, but the string gets printed.
Environment: SSRS 2005
Using the ReportViewer Control in a .Net 2.0 Web App to render the reports.
BarCodes print fine in the following situations:
1. When the Report is exported to Excel and when printed from there
2. When you click on the print button on Internet Explorer
3. When saving as html (from view source) and opening that html document and printing.
BarCodes do NOT get printed in the following situation:
1. When printing by clicking on the "Print" (Active X Control) icon. Even the "Print Preview" does not show the Barcode.
Reporting Services From WebBrowser Control - Print = Unable To Load Client Print Control
Mar 20, 2007UPDATE #2: When it said "Do you want to install Microsoft SQL Server" I said "yes" and that caused it to work. I exited and re-ran and now the print runs w/o the "install SQL Server" (If the prompt had said "Do you want to install the print dialog" we wouldn't be having this discussion...)
UPDATE: After posting this i discovered that the same thing occurs when attempting to print the report direct from IE6: First a dialog pops up "Do you want to install this software?" Name: Microsoft SQL Server. When I click "Don't Install" I get the dialog "unable to load client print control." Since this happens direct from IE6 I suspect it's browser settings. I'll resume tomorrow and post a followup.
My WinForm C# app integrates Reporting Services by calling them from WebBrowser controls. The problem is attempts to print cause a dialog: "unable to load client print control."
I've read prior posts that say "enable Active-X in your browser" - I don't know how to do that from a WebBrowser control.
Any ideas how to support Reporting Services "Print" from within a WebBrowser control?
RELATED THREADS
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=332145&SiteID=1
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=264478&SiteID=1
MS SQL Print Statement
Mar 23, 2007i would like to enquire about the Print statement. If I do not want to use the Raiseerror to raise an error as its not an error, but want to just print out in a dialog box, how do i do it?I tried using the Print statement but nothing happened. I am using this inside my trigger, can someone help?Thank You
View 1 Replies View RelatedPrint Variable
Feb 15, 2008count record from database and assign that value in a variable.and now i want to print that variable in table in td (column)Please tell me how can i?
View 2 Replies View RelatedIs There A Simple Way To Print The Following
May 27, 2005This is so stupid of a question but is there a simple way to print (to a printer) the results of SELECT * FROM SkillGoals --- To show all data(including column headings?)
View 8 Replies View RelatedT-SQL PRINT Flush?
Aug 21, 2004I have a long running (48 hour+) stored proc. I've added PRINT statements that print "1%", "2%", etc to provide progress so I can get a ballpark idea of how far along the process is. I ran the stored proc and realized that this won't work. I don't see the output of the print statements until the stored proc is completed. I'm running this from Query Analyzer (SQL Server 2000 SP3a).
For example, the following will wait ten seconds and then print both statements; it doesn't print one then wait, then print the other. Is there any flush command to make the print statements take effect immediately?
PRINT 'before'
WAITFOR DELAY '000:00:10'
PRINT 'after'
Some PRINTs Won't Print Anything
Oct 20, 2006I'm trying to use the PRINT statement to trace what an SP is doing, while
running in QA.
However, some PRINTs seem not to print anything. I can see that the
code part is being executed.
Any ideas? (It's just simple prints like print 'executing an insert' .)
Print A Table
Jul 6, 2006Is there an easy way to print off a sql table ? I wanted something along the lines of an Access query that you can print. Or is it easiest to link to the SQL table and use Access to display it ?
View 4 Replies View RelatedPrint Datetime
Mar 6, 2008just wanted to get sql to stamp the date/time to the screen when i'm running a query.
i tried:
print 'Formatting Table1'
print datetime
go
got the following error:
Msg 128, Level 15, State 1, Line 2
The name "datetime" is not permitted in this context. Valid expressions are constants, constant expressions, and (in some contexts) variables. Column names are not permitted.
Can't Print Variable
Jul 23, 2005Hi,In the query analyser if I type the following:DECLARE @SortOrder integerexec pr_Admin_SetFieldSortOrder @SortOrderprint @SortOrder@SortOrder is never printed. I just get the message saying that theQuery Batch Completed.Why ?Regards
View 2 Replies View RelatedPrint Button
Feb 1, 2006Print button is disabled for some users. Don't know why it is doing so? Works fine for most of the users in the same group.
Any help is much appreciated.
SQL SERVER Reporting Services 2000
Win XP
Print Is Not Allowed In UDF
Apr 13, 2006I want to put some trace in the a UDF, so I put print in the function. IT gave error. Can anyone please explain why this happen. But this work with SPs.
Cheers
Shimit
Print Button
Aug 8, 2006I have a web application with a stand alone report. When I put the ReportViewer in the webform I can see every reports in the project. The problem is that I can't see the print report button...
If I indicate that the report is a "Server Report" instead a local report the Print Report appear, but a need a "Local Report" not a "Server Report" How can i solve that.
Thank you.
Print Version
Nov 30, 2006I have created a report which contains grouping. Yesterday I learnt how to add a boolean paramter to expandAll. Now in my ASP.Net front end I am using ReportViewer to retrieve the report...
Now I want to introduce a "Print Version" and "Normal Version" (print version being all rows showing (expanding all grouping) and normal being groups showing....
Will this work?
Use javascript to create to div... 1 showing ReportViewer1 where expandAll parameter is true and div 2 containing ReportViewer2 where parameter is false...a radiobutton conrolled by javascript code will hide 1 div and show the other?!
For some reason it doesnt load the report in ReportViewer2?!
Please help!
Thanks!!!
Print All Reports At Once
May 20, 2008
Hi,
I created a parameterized report. When end user select different values from the parameter drop down list , he/she can see the corresponding report for each value.
Now end user wants to print all those reports at the same time , without selecting each report by changing the parameter values.
Is it possible in SSRS 2005?
Thanks
Using PRINT Within A Function
Feb 26, 2008I created a function that returns a sequence of dates between @LowLimit and @HighLimit. The problem that I'm having is if a bad date is passed into the function I get this error:
Msg 242, Level 16, State 3, Line 1
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
So I tried using:
IF @@ERROR = 242
PRINT N'Must use a valid date.';
which gives this error when I try to create the function:
Msg 443, Level 16, State 14, Procedure fnDates, Line 10
Invalid use of side-effecting or time-dependent operator in 'PRINT' within a function.
Here's my code:
CREATE FUNCTION [dbo].[fnDates]
( @LowLimit DATETIME, @HighLimit DATETIME )
RETURNS @Values TABLE
( Value DATETIME )
AS
BEGIN
IF @@ERROR = 242
PRINT N'Must use a valid date.';
DECLARE @Temp DATETIME
DECLARE @DateCtr int
SET @DateCtr = 0
/* This allows you to enter the later date first */
IF @LowLimit > @HighLimit
SELECT @Temp = @LowLimit,
@LowLimit = @HighLimit,
@HighLimit = @Temp
INSERT into @Values
VALUES (@LowLimit)
WHILE DATEADD(dd, @DateCtr, @LowLimit) < @HighLimit
BEGIN
SET @DateCtr = @DateCtr + 1
INSERT into @Values
SELECT DATEADD(dd, @DateCtr, @LowLimit)
END
RETURN
END
How Can I Get The Result Of A SQL PRINT Statement
Nov 5, 2003I am using MSDE and WebMatrix. My stored procedure is creating a Dynamic SQL query and is is about 200 lines long.
I am not getting the expected results, but also not generating any errors. I inserted a Print statement to print the resultant SQL query, but I don't know how to see or display that print result.
I do NOT have SQL2000, only MSDE. I am using WebMatrix and VB.net to create my application. Is there some class in asp.net that will help me, or some free utility. One of the problems is that the dynamic SQL is using over 20 parameters to create the query; the end result of the user picking fields on the webform.
Print Functionality In OLAP
Jan 15, 2001Hi,
Is is anyway to print out the result from OLAP cube?
Thanks in advance.
David
How To Print Out Table Structure For SQL 7
Oct 27, 2000I just started with SQL 7 and I would like to know how to print
out the structure of a table in SQL 7.
thanks in advance.
Error Will Not Print Or Raiserror
Oct 18, 2000I am testing a simple stored proc below.
create procedure procpooh @val1 int, @val2 int as
insert into pooh (val1, val2)
values(@val1,@val2)
declare @error int
SELECT @error = @@ERROR
IF @error <> 0
BEGIN
print 'it failed'
RAISERROR(50020,16,1,@error)
end
When I run the proc and feed it the values it fails(that' what I expect)
because there is a field not being supplied which will not allow nulls.
However neither the print ' it failed ' or the raiserror work. I get the message below instead. Any ideas why the print or raiserror don't work?
Server: Msg 515, Level 16, State 2, Procedure trpooh, Line 11
Cannot insert the value NULL into column 'val3', table 'Chapter5DB.dbo.pooh2'; column does not allow nulls. INSERT fails.
The statement has been terminated.
OSQL -- Print Into File
Sep 4, 2003Why osql igores parameter -w for command PRINT... and why cut the last character ????
osql -S<Server> -d<DB> -E -Q"Print replicate('ab',250)" -otest.txt -n -h -b -w1000
this one example returns two rows, first has 255 characters and second only 244 characters...
Just Want To Print Out Table Structure
Jul 19, 1998This has to be a very simple think to do, but, I`m new....
Have NT4.0, SQL6.5, and existing database with about 30-40 tables.
Just want to be able to print out each table structure with record info. Don`t need the actual data printed, just the table/record structure.
Thanks, and again, I`m new to SQL/Query so go easy on me.... ;-)
Ron
How To Print A Table Design
Apr 11, 2002How can I print a table design. I know that I can display the design by right clicking on a table and selecting DESIGN. However, there are no options in this screen to print the design.
I also tried creating a diagram for a table. I can print the design from the diagram window as long as it fits in the window. However, when I have more columns than can fit on my screen, the print command will only print what is displayed.
Is there an easy way to print the design of a table in SQL 2000?
Thanks
Joel Isaacson
Print The Design Of A Tabel
Nov 25, 2005Hi,
I cannot figure out how to print the design of a tabel.
What I need is to have printed on a paper the list of the columns, data type, length, allow nulls and description for a table.
thx
PRINT Statements Not Printing
Mar 28, 2007Hi guys,
I know that the PRINT statements only print after a certain process is done, not when the actual PRINT statment is executed. Can someone explain when exactly does it print them and is there a way to make the print statment show right away?
Print Table Format
Feb 25, 2004I want to print the format of a table. You can view the format from enterprise manager under properties, but I was wondering if there is some command that you can use in query analyser to view the stucture of a table?
View 5 Replies View RelatedPrint Statement For Query
Nov 18, 2014How to write query with PRINT Statement for below query.
WITH CTE1 AS (SELECT * FROM table1),
CTE2 AS (SELECT * FROM table2),
CTE3 AS (SELECT * FROM table3)
In between to use PRINT statement seeing where my current query is.
So once we process "SEELCT * FROM table1" and gets completed I want to print as "Table table1 completed".
Attribute Value In A Print Statement
May 2, 2008Hey i have written a constraint trigger that will return an error message, but i want to include values from a count in the error msg. i know how it would be doing in oracle
RaisError('You cannot add more then' ||Bedroom_Count|| 'student tenants into this house', 10, 1)
how do i achieve the same result in MS SERVER
regards
QUISH
Print Statement Not Working...
Jun 2, 2008Hi,
Mine Below Query is not Printing Anything though there is a matching record in table "gpcb_proj_paras"
Can any one help me??
declare @catg as char(1)
set @catg = '''A'''
declare @qry as nvarchar(3000)
declare @paras as varchar(200)
Set @paras = (Select convert(nvarchar(200), app_paras) from gpcb_proj_paras t
where t.act = @catg)
print @paras
-- Regards
Prashant Hirani
Is There A Way To Print Some Comments Btw Queries
Feb 7, 2007I use sql query analyzer
/*text msg 1 :This is table A */
select * from a
/*text msg 2*: This is table B */
select * from b
I want some results in text like
This is table A
name age
jeff 28
ff 17
--------
this is table B
comid name lot
23 ie 100
34 ibm 234
---------
PRINT Messages Before Executing A SP
Aug 1, 2007Hi,
I have a SP called Extraction_Info that calls other Stored Procedures(Create_Employee, Create_Detail).
When i execute the SP Extraction_Info, I want to print messages before execution of individual
Stored procedures within this SP.
Code that i currently use:
=================================================================
CREATE PROC Extraction_Info
AS
BEGIN
PRINT '** Employee Extraction ..In progress **'
EXEC Create_Employee
PRINT '** Employee Extraction .. Completed **'
END
.
.
BEGIN
PRINT '** Detail Extraction ... In progress **'
EXEC Create_Detail
PRINT '** Detail Extraction ... Completed **'
END
===================================================================
The problem is that the message '** Employee Extraction ..In progress **' gets printed only after the execution of the proc Create_Employee is completed
Please advise how i should change the code.
Thanks,
Print SSRS Report?
Mar 27, 2008is there any way to schedule to print reports every morning from ssrs?
View 1 Replies View Related