I have a main report and a subreport. Subreport is not at row level but is at report level. The sub report has a parameter that needs to be passed from mainreport. However, the subreport's parameter should be set and the subreport should be refreshed when the user clicks on a row in mainreport. Can I use drill-through / navigation feature in any way to build this functionality?
Any help will be most appreciated.
I have two report , first is main report which is matrix and have one parameter User_ids which is multi value selection and my second report is basic chart of user_wise performance.
Now, my main report (matrix ) works fine for Multiple selection of users and i have putted one textbox on main report chart which has action properties set for chart report, when user click on chart button it must goes to chart with user selected in main report. Now , i have used expression for parameter to send it like ..
=join(parameter!user_id!value,",") which pass selected value to chartÂ
And when I am selecting single user it passing that value to chart parameter list but , when it is more than one user it errors with conversion failed when converting the nvarchar value '121,128' to data type int. But my chart also works when passing 121,128 in user parameter in preview of report .
Is it possible to pass a multi-value parameter from a master report to one or more subreports? If so, how?
View 12 Replies View RelatedHi guys,
I have managed to pass a string parameter form the main report to the subreport with no problems, but when i try and use the same method to pass a datetime type, i am issued with the following error messase:
"[rsErrorExecutingSubreport] An error occurred while executing the subreport €˜SubReportName€™: The value provided for the report parameter 'MasterDate' is not valid for its type."
I cant see why it work for strings, but not for datetime. Any suggestions will be very much appreciated
I have a multi-valued parameter that I want to pass to a subreport. The values are 11, 12, 13, and 14.
So here's what I've done:
1. For the properties of the clickable field of the first report, I have gone to the Navigation tab and chosen the subreport in the "jump to report" pulldown.
2. Then I clicked on the Parameters button and added a parameter name for the multi-valued parameter I am trying to send. For the Parameter value, I have tried 11,12,13,14. I have also tried =Split(11,12,13,14)
3. On the subreport, I create a report parameter with the same name, data type is string, multi-value is checked, and the available values pulldown is populated by a query.
So I run the first report and click on the link that brings me to the subreport, but all the subreport shows is the results for 11, not 12, 13, and 14.
How can I get the second report to understand that I want it to show all the records related to 11, 12, 13, and 14? If I bypass the first report and simply use the drop-down to choose 11, 12, 13, and 14 in the subreport, it works fine. I just can't seem to figure out how to correctly have the first report tell the subreport that it wants 11, 12, 13, and 14.
Thanks in advance for any advice!
Dan
I have two reports 'Product Details' and 'Sales by Product'
When i click on 'Product ID' field in 'Product Details' report, It has to drill through to 'Sales by Product' which has a parameter 'Product ID' in it.Â
I have written the following javascript
="javascript:void(window.open('http://servername/Rportserver/Pages/Report.aspx?ItemPath=%2fTestDrillThru%2fSales+By+Product&rs:Command=Render&ChildProductID="& Fields!ProductID.Value &"','_blank',',resizable=1,width=1600,height=800,left=50'))"
When i drill through, field value is not passing to 'child product id' in sales by product. I have to give the value again in child report.
Hi,
I have a subreport added to the main report and I want to make this report visible only when the parameter value is met.
Ex, I have a parameter CustName in the main report and want to show the subreport when the custName = xxxxx. There reports are parameter driven not data driven reports.
Any help is greatly appreciated.
Thanks,
Sirisha
Hi...
I have a requirement where I need to pass the Users Windows userID and the AD group through which he is associated to the database so that I can get appropiate data.
Is there a way I can pass the Windows user ID and the AD group(through which he is authenticated in Reporting Serivces) through the Reporting Serivces as a parameter so that it can be used in the Reporting Query.
Thanks,
siaj
I have a 2 reports A and B.A is a dashboard with graphical objects like graphs and pie charts.B is a simple table with the base data used in A (see it as the factual table data)I would like to click on any of the objects on A and pass them into B BUT I don't want to use extra parameters on B.Is it possible somehow to pass the valued from A to B using action and then use this as filters of the table in B instead of forcing me to create parameters in B?
View 3 Replies View RelatedThere is a form in an Access Project (.adp, Access front end with SQLServer) for entering data into a table for temporary storing. Then, byclicking a botton, several action stored procedures (update, append) shouldbe activated in order to transfer data to other tables.I tried to avoid any coding in VB, as I am not a professional, but I havefound a statement in an article, that, unlike select queries, form's InputProperty can't be used for action queries. Therefore, parameters can bepassed to action stored procedure only by using ADO through VB.As I'm not very familiar with VB, I had to search in literature.So, this is a solution based on creating Parameter object in ADO and thenappending values to Parameter collection.Please, consider the following procedure I created for passing parametersfrom form's control objects (Text boxes) to a stored procedureDTKB_MB_UPDATE:Private Sub Command73_Click()Dim cmd As ADODB.CommandSet cmd = New ADODB.Commandcmd.ActiveConnection = CurrentProject.Connectioncmd.CommandText = "DTKB_MB_UPDATE"cmd.CommandType = adCmdStoredProcDim par As ADODB.ParameterSet par = cmd.CreateParameter("@DATE", adDBTimeStamp, adParamInput)cmd.Parameters.Append parSet par = cmd.CreateParameter("@BATCH_NUMBER", adVarWChar, adParamInput, 50)cmd.Parameters.Append parSet par = cmd.CreateParameter("@STATUS", adVarWChar, adParamInput, 50)cmd.Parameters.Append parSet par = cmd.CreateParameter("@DEPARTMENT", adVarWChar, adParamInput, 50)cmd.Parameters.Append parSet par = cmd.CreateParameter("@PRODUCTION", adVarWChar, adParamInput, 50)cmd.Parameters.Append parSet par = cmd.CreateParameter("@SAMPLING_TYPE", adVarWChar, adParamInput,50)cmd.Parameters.Append parcmd.Parameters("@DATE") = Me.DATEcmd.Parameters("@BATCH_NUMBER") = Me.BATCH_NUMBERcmd.Parameters("@STATUS") = Me.STATUScmd.Parameters("@DEPARTMENT") = Me.DEPARTMENTcmd.Parameters("@PRODUCTION") = Me.PRODUCTIONcmd.Parameters("@SAMPLING_TYPE") = Me.SAMPLING_TYPEcmd.ExecuteSet cmd = NothingEnd SubUnfortunately, when clicking on the botton, the following error apears:"Run-time error'-2147217913 (80040e07)':Syntax error converting datetimefrom character string."Obviously, there is some problem regarding parameter @DATE. In SQL Server itis datetime, on the form's onbound text box it is short date (dd.mm.yyyy)data type. I have found in literature that in ADO it should beadDBTimeStamp.So, what is the problem ?Greetings,Zlatko
View 2 Replies View Related
I will be receiving an incremental file that will contain €œI€? inserts, €œU€? updates, and €œD€? deletes as an action code that I will load into a transform table. If I conditionally split the action code I will lose the fifo order and the data in the transform sequence could be applied out of order causing an error. If I use 3 separate data flows I can apply incremental doing the inserts first, then the updates and then the deletes. I think this would work but I would have to read the transform table three times.
I am looking for some feedback on what is the best most efficient way to handle what I am trying to accomplish?
Thanks
Larry
I have number of users which are under 6 Groups. We have 4 drill through actions. Now I would like to restrict 2 drill through actions for only some groups.
View 2 Replies View RelatedGreetings -
I have a report which contains quite a few parameters for user input. The user wants the parameters arranged in a 'down & over' orientation. This has been done via the parameter order.
The next question is - how do I get the tab action between the parameters changed from the 'over & down' default to the new 'down & over' orientation?
Is this functionality currently supported?
Tks & B/R
I am doing report development against OLAP (Cube). I have a parameter which is a multi-value parameter, and I need to pass this as a parameter into a sub-report (pass all the values selected in this multi-value from the main report to sub report parameter).
Is this even possible? If yes how do I achieve this.
Currenty I sent like Fields!Region.Value(0), but I want to send actually Fields!Region.Value() (meaning all selected).
Any help ASAP is appreciated.
I am passing a date range to a subreport which is a table that I want to show a list of months in a specific range. I am passing:
FromDateShipedYearMonth - ([Date Shipped].[Month].&[2006]&[4]&[12]
ToDateShippedYearMonth - ([Date Shipped].[Month].&[2007]&[4]&[11])
I have parameters set up in my Main report:
<Subreport Name="subreport2">
<Parameters>
<Parameter Name="FromDateShippedYearMonth">
<Value>= "(" & Code.PreviousYear(Parameters!DateShippedMonth.Value) & ")"</Value>
</Parameter>
<Parameter Name="ToDateShippedYearMonth">
<Value>="(" & Parameters!DateShippedMonth.Value & ")"</Value>
</Parameter>
</Parameters>
And in my Subreport:
<ReportParameter Name="FromDateShippedYearMonth">
<DataType>String</DataType>
<Prompt>FromDateShippedYearMonth</Prompt>
</ReportParameter>
<ReportParameter Name="ToDateShippedYearMonth">
<DataType>String</DataType>
<Prompt>Year - Month</Prompt>
</ReportParameter>
</ReportParameters>
I would like to display data from 12/2006 through 11/2007. Instead I get a list of 1/2006 through 12/2006.
Any ideas?
I have two subreports on one master report who's parameters @ReportDate would be set to the same date each time the report is run. When i run the master report i get an error for each report that tells me that one or more parameters required to run the report have not been specified. How do i pass the parameter i want to use in both reports from the master report through to the subreports.
Thanks again!
I need to convert a Crystal report that contains three subreports. Each of these subreports uses a different stored procedure to obtain data. The main report uses data from these subreports to calculate averages in the footer etc.
How do i get the data contained in these subreports so i can use it in my main report??
Thanks in advance
Hello everybody,
I'm trying to pass the values of a subreport matrix to my main report.
For example, I have a matrix subreport like this:
USA CANADA FRANCE GERMANY
Client1Sales $100 $200
Client2Sales $600 $50 $300
What I would like to do is to pass the USA Sales Amount of Client1 (e.g $100) to my main report.
Is there any way to do this?
Thanks in advance for your answers!
Zoz
I have two reports.
1. Main Report
2. Sub Report.
I have cascading parameters in 'Main Report'. When i try to pass cascading parameters in to sub-report, I could pass only 'first parameter' value to sub-report.Is there a way that i can pass cascading parameters to the child report?
I am trying to use a query analyzer to perform a task and I keep getting this message....how do I get around this?
View 1 Replies View RelatedHi
Im in a bit of a pickle due to a large amount of data in a table and the query Im running is taking a very long time, so Id like to get some advice from the guys here to see if it can be done another way.
Ok, so heres the background. I have a table, see desc below, that contains transaction data for a number of users. Each user may have more than one transaction. In each row the SEQUENCENUMBER column is populated with a timestamp for the transaction, so I was using this to get the latest. However there are over 1 million rows in the table and the query below has taken over 12 hours so far to run. Has anyone any ideas on how I can make life a little easier for myself here?
SQL Query
Code:
select user,recipient,sequencenumber from trans_database where user IN (select distinct(user) from trans_database)
order by sequencenumber desc limit 1;
Table Layout
Code:
ID int(10) unsigned (NULL) NO PRI (NULL) auto_increment select,insert,update,references
RECIPIENT varchar(5) latin1_swedish_ci NO select,insert,update,references
DONOR varchar(5) latin1_swedish_ci NO select,insert,update,references
USER varchar(20) latin1_swedish_ci NO select,insert,update,references
UPDATETYPE varchar(10) latin1_swedish_ci NO select,insert,update,references
REPFLAG varchar(1) latin1_swedish_ci NO select,insert,update,references
OPFIELD varchar(20) latin1_swedish_ci NO select,insert,update,references
SEQUENCENUMBER varchar(18) latin1_swedish_ci NO select,insert,update,references
REQUESTDTS varchar(20) latin1_swedish_ci NO select,insert,update,references
PROCESSED varchar(1) latin1_swedish_ci YES (NULL) select,insert,update,references
hi,I am getting the following error while trying to add a remote server.The user does not have permission to perform this action.The command i used is:exec sp_addlinkedserver 'remote_server_name'What is the solution?Regards,Kalaivanan.
View 1 Replies View RelatedHello All:
I have a web-based utility that enables users to enter data. I have created several SSIS packages that run on a regular basis that act on the data being collected. While the packages run on a set schedule now I would like to provide users the ability to trigger a package on an as-needed basis as well. The question is how do I do it?
I do not know VB.net, and believe that the web app has been coded using ASP.net. I am looking for some high-level pointers to go about my task. Any links to some articles would also be appreciated.
Thank you!
Hi All
I kind of hit the wall with this message.
Here is what I do:
select * from sys.dm_db_index_physical_stats(24,null,null, null, null)
My server is 64 bit 2005, sp2.
That's the message I get.
I am loging int as Administrator.
Does anybody know what needs to be done?
hey people having a nightmare getting asp.net 2.0 to work with sql server 2005 express, bit of a newbie with it. trying to display a table from my sql database and every time i run the aspx table im getting this error. User does not have permission to perform this action.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: User does not have permission to perform this action.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): User does not have permission to perform this action.]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +734995
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1838
System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +33
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +628
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +121
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +137
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +83
System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1770
System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +17
System.Web.UI.WebControls.DataBoundControl.PerformSelect() +149
System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70
System.Web.UI.WebControls.GridView.DataBind() +4
System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82
System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +69
System.Web.UI.Control.EnsureChildControls() +87
System.Web.UI.Control.PreRenderRecursiveInternal() +41
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1360 keep getting the user permission error, even though it says on the management console that i have access to the database any ideas? rob
I just installled the Visual web developer - express addition. When I try to add aSQL database to my project it gives the following error - "User does not have permission to perfor this action" . Can someone please help?
View 4 Replies View RelatedI have one main report which has 5 subreport. i dont want to show all the sub reports all the time. i want to suppress any subreport based on some conditioned. can i do it in case of the SSRS. How?
View 2 Replies View RelatedFolks, This is driving me nuts. I posted the other day on a related issue, which I belive turned out to be a file permission. I am trying to test my asp.net site under IIS before deploying it. I am now getting the above message which breaks on the opening page on opening a connection to the sql server database. I have permissions set on the database for MachineNameASPNET and NT AUTHORITYNETWORK SERVICE as Ken Tucker suggested. Still getting the message. This certainly looks like a sqlserver permission issue but I am at a loss as to how to grant IIS or the specific web app permission to access the database. Any assistance is truely appreciated. I have spent way to many hours on this. If you don't have the answer but can suggest a resource where I can research it that would help also. Thanks
View 4 Replies View Relatedwinxp pro, vs2005, sqlexpressIm building an application that uses a sqlexpress database and apparently something has changed, but im not sure what. When I try to expand the node for my sqlexpress database within visual studio, i get an error "user does not have permissions to perform this action". I can connect with sqlexpress management studio. What should I check ?My connection string looks like so: data source=.SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|mytestnetdb.mdf;User Instance=true
View 3 Replies View Related
i have a report that contains a sub-report that is embeded in one of the textboxes of the table. what i am trying to do
is have the main table toggle visilibity based on the value of the sub-report...in my case the toggle is very simple - if the sub-report returns any value at all, then i need the row in the parent table to be 'visible'
any help would be greatly appreciated.
thanks!
-dk
I want to toggle the visibility of a report item in my page footer based on whether or not a particular subreport has been rendered.
The report has 3 subreports. The subreport above the subreport in question can span several pages, so the subreport I want information on can render on page 1 (for a short report) or page 12 (for example) on a longer report.
Is there a way to determine within the main report when a particular subreport has been rendered and is currently visible?
Thanks in advance for all replies.
John
I'm not sure if parameters is the correct solution, but it's all I can think of.
I'm trying to use a "template" report with a graphic logo and some other standard layout to provide all my subreports with the same look. On the "default" subreport, I intend to have links to the other subreports, but I can't find a way to dynamically change the subreport shown by the Subreport item.
When inserting a subreport into the main report, the subreport parameters are not listed for selection in the subreport object property page. If I add the parameter names manually, the params are not properly passed to the subreport and I get a runtime error (Internal error, see log).
So I'm not able to link the subreport properly. Any Idea?
Both (local) reports reside in a DLL in the same namespace, which is not the default namespace.