Performance Insert Statements
Jan 28, 2008
Hi,
I'm using version 3.5.5386.0 of SqlServerCompact Edition for windows mobile.
My first tests indicates that an insert statement with '?' ist 20 % faster than with '@p1' parameters:
"INSERT INTO Itest(PKey,value1,value2,value3,Date1) VALUES (?,?,?,?,?)"
"INSERT INTO Itest(PKey,value1,value2,value3,Date1) VALUES (@P1,@2,@3,@P4,@P5)"
I've no explanation for that. I reported some problems with the '?' parameters in my other task http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=2715685&SiteID=1
So I'm a little bit afraid to use this version.
Is there a recommandation which version to use for Inserts?
Thanks,
Stefan
View 1 Replies
ADVERTISEMENT
Jul 20, 2005
Hi All,I am getting slower performance of select statements in MS SQL. I amfinding select statements in MS SQL are even slower than MS ACCESS. Isthere any way to improve the performance of select statements in MSSQL by tuning the database of anything else??Thanks in advance!Hoque
View 3 Replies
View Related
Dec 15, 2006
Hi guys! I have these commands that insert into two tables, if condition 1 is met, it will insert into the first table, if the second condition is met, it will insert into the second table.
Is there a way for the insert statements to be merged so that I won't be executing two statements?
Dim update_phase_before As New SqlCommand("INSERT INTO TE_shounin_todokesho_jizen (syain_No,date_kyou,time_kyou) SELECT syain_No,date_kyou,time_kyou FROM TE_todokesho WHERE TE_todokesho.b_a='before'", cnn)
Dim update_phase_after As New SqlCommand("INSERT INTO TE_shounin_todokesho_jigo (syain_No,date_kyou,time_kyou) SELECT syain_No,date_kyou,time_kyou FROM TE_todokesho WHERE TE_todokesho.b_a='after'", cnn)
Thanks.
View 1 Replies
View Related
Nov 13, 2007
i'm quite new with sql and i have an question about het insert statements.
Is the order of the insert statements from any importance?
and why is/isn't it?
Greetz
View 6 Replies
View Related
Feb 22, 2008
Hi All
I decided to change over from Microsoft Access Database file to the New SQLServerCe Compact edition. Although the reading of data from the database is greatly improved, the inserting of the new rows is extremely slow.
I was getting between 60 to 70 rows per sec using OLEDB and an Access Database but now only getting 14 to 27 rows per sec using SQLServerCe.
I have tried the below code changes and nothing seams to increase the speed, any help as I would prefer to use SQLServerCe as the database is much smaller and I€™m use to SQL Commands.
Details:
VB2008 Pro
.NET Frameworks 2.0
SQL Compact Edition V3.5
Encryption = Engine Default
Database Size = 128Mb (But needs to be changes to 999Mbs)
Where Backup_On_Next_Run, OverWriteQuick, CompressAns are Booleans, all other column sizes are nvarchar and size 10 to 30 expect for Full Folder Address size 260
TRY1
Direct Insert Using Data Adapter.
Me.BackupDatabaseTableAdapter1.Insert(Group_Name1, Full_Folder_Address1, File1, File_Size_KB1, Schedule_To_Run1, Backup_Time1, Last_Run1, Result1, Last_Modfied1, Last_Modfied1, Backup_On_Next_Run1, Total_Backup_Times1, Server_File_Number1, Server_Number1, File_Break_Down1, No_Of_Servers1, Full_File_Address1, OverWriteQuick, CompressAns)
14 to 20 rows per second (Was 60 to 70 when using OLEDB Access)
TRY 2
Using Record Sets
Private Sub InsertRecordsIntoSQLServerce(ByVal Group_Name1 As String, ByVal Full_Folder_Address1 As String, ByVal File1 As String, ByVal File_Size_KB1 As String, ByVal Schedule_To_Run1 As String, ByVal Backup_Time1 As String, ByVal Last_Run1 As String, ByVal Result1 As String, ByVal Last_Modfied1 As String, ByVal Latest_Modfied1 As String, ByVal Backup_On_Next_Run1 As Boolean, ByVal Total_Backup_Times1 As String, ByVal Server_File_Number1 As String, ByVal Server_Number1 As String, ByVal File_Break_Down1 As String, ByVal No_Of_Servers1 As String, ByVal Full_File_Address1 As String, ByVal OverWriteQuick As Boolean, ByVal CompressAns As Boolean)
Dim conn As SqlCeConnection = Nothing
Dim CommandText1 As String = "INSERT INTO BackupDatabase (Group_Name, Full_Full_Folder_Adress, File1,File_Size_KB, Schedule_To_Run, Backup_Time, Last_Run, Result, Last_Modfied, Latest_Modfied, Backup_On_Next_Run, Total_Backup_Times, Server_File_Number, Server_Number, File_Break_Down, No_Of_Servers, Full_File_Address, OverWrite, Compressed) VALUES ('" & Group_Name1 & "', '" & Full_Folder_Address1 & "', '" & File1 & "', '" & File_Size_KB1 & "', '" & Schedule_To_Run1 & "', '" & Backup_Time1 & "', '" & Last_Run1 & "', '" & Result1 & "', '" & Last_Modfied1 & "', '" & Latest_Modfied1 & "', '" & CStr(Backup_On_Next_Run1) & "', '" & Total_Backup_Times1 & "', '" & Server_File_Number1 & "', '" & Server_Number1 & "', '" & File_Break_Down1 & "', '" & No_Of_Servers1 & "', '" & Full_File_Address1 & "', '" & CStr(OverWriteQuick) & "', '" & CStr(CompressAns) & "')"
Try
conn = New SqlCeConnection(strConn)
conn.Open()
Dim cmd As SqlCeCommand = conn.CreateCommand()
cmd.CommandText = "SELECT * FROM BackupDatabase"
cmd.ExecuteNonQuery()
Dim rs As SqlCeResultSet = cmd.ExecuteResultSet(ResultSetOptions.Updatable Or ResultSetOptions.Scrollable)
Dim rec As SqlCeUpdatableRecord = rs.CreateRecord()
rec.SetString(1, Group_Name1)
rec.SetString(2, Full_Folder_Address1)
rec.SetString(3, File1)
rec.SetSqlString(4, File_Size_KB1)
rec.SetSqlString(5, Schedule_To_Run1)
rec.SetSqlString(6, Backup_Time1)
rec.SetSqlString(7, Last_Run1)
rec.SetSqlString(8, Result1)
rec.SetSqlString(9, Last_Modfied1)
rec.SetSqlString(10, Latest_Modfied1)
rec.SetSqlBoolean(11, Backup_On_Next_Run1)
rec.SetSqlString(12, Total_Backup_Times1)
rec.SetSqlString(13, Server_File_Number1)
rec.SetSqlString(14, Server_Number1)
rec.SetSqlString(15, File_Break_Down1)
rec.SetSqlString(16, No_Of_Servers1)
rec.SetSqlString(17, Full_File_Address1)
rec.SetSqlBoolean(18, OverWriteQuick)
rec.SetSqlBoolean(19, CompressAns)
rs.Insert(rec)
Catch e As Exception
MessageBox.Show(e.Message)
Finally
conn.Close()
End Try
End Sub
€™20 to 24 rows per sec
TRY 3
Using SQL Commands Direct
Private Sub InsertRecordsIntoSQLServerce(ByVal Group_Name1 As String, ByVal Full_Folder_Address1 As String, ByVal File1 As String, ByVal File_Size_KB1 As String, ByVal Schedule_To_Run1 As String, ByVal Backup_Time1 As String, ByVal Last_Run1 As String, ByVal Result1 As String, ByVal Last_Modfied1 As String, ByVal Latest_Modfied1 As String, ByVal Backup_On_Next_Run1 As Boolean, ByVal Total_Backup_Times1 As String, ByVal Server_File_Number1 As String, ByVal Server_Number1 As String, ByVal File_Break_Down1 As String, ByVal No_Of_Servers1 As String, ByVal Full_File_Address1 As String, ByVal OverWriteQuick As Boolean, ByVal CompressAns As Boolean)
Dim conn As SqlCeConnection = Nothing
Dim CommandText1 As String = "INSERT INTO BackupDatabase (Group_Name, Full_Full_Folder_Adress, File1,File_Size_KB, Schedule_To_Run, Backup_Time, Last_Run, Result, Last_Modfied, Latest_Modfied, Backup_On_Next_Run, Total_Backup_Times, Server_File_Number, Server_Number, File_Break_Down, No_Of_Servers, Full_File_Address, OverWrite, Compressed) VALUES ('" & Group_Name1 & "', '" & Full_Folder_Address1 & "', '" & File1 & "', '" & File_Size_KB1 & "', '" & Schedule_To_Run1 & "', '" & Backup_Time1 & "', '" & Last_Run1 & "', '" & Result1 & "', '" & Last_Modfied1 & "', '" & Latest_Modfied1 & "', '" & CStr(Backup_On_Next_Run1) & "', '" & Total_Backup_Times1 & "', '" & Server_File_Number1 & "', '" & Server_Number1 & "', '" & File_Break_Down1 & "', '" & No_Of_Servers1 & "', '" & Full_File_Address1 & "', '" & CStr(OverWriteQuick) & "', '" & CStr(CompressAns) & "')"
Try
conn = New SqlCeConnection(strConn)
conn.Open()
Dim cmd As SqlCeCommand = conn.CreateCommand()
cmd.CommandText = CommandText1
'cmd.CommandText = "INSERT INTO BackupDatabase (€¦"
cmd.ExecuteNonQuery()
Catch e As Exception
MessageBox.Show(e.Message)
Finally
conn.Close()
End Try
End Sub
€˜ 25 to 30 but mostly holds around 27 rows per sec I
Is this the best you can get or is there a better way. Any help would be greatly appericated
Kind Regards
John Galvin
View 3 Replies
View Related
Apr 13, 2001
I need to write some insert statements, 1 per table, ~100 tables, all having the approximante form:
Select Into TableA Select * From TableB
Except that I need explicit statements:
Select Into TableA Col1, Col2, Col3, ... ColN Values ...
The reason is that I need to preserve the current identity values (it's a replication setup scenario). I can set Identity_Insert On, but then it wants the explicit column names and values.
Is there a wizard or utility that will generate the statements for me? With
100 tables in the db, I'm not looking forward to writing it all :-)
TIA,
Arthur
PS. Given that it's Easter weekend, if you have an answer could you please e me directly? Thanks!
View 1 Replies
View Related
May 14, 2002
Hello,
I am creating my companys' database and I have a small problem that must be
solved.
I have a pictures table:
PicturesTable
-------------
ProductID int ForeignKey
Picture nvarchar(30)
...
(A product can have many pictures & the ProductID is unique for any product,
but not for the table of pictures).
What I want to do is to somehow do a procedure to:
1) Check if any images (for a productID) exists in the table
2) if they do not exist then add the appropriate images into the table
3) if the images exist, then update the images with the new one that I have.
What I thought was to just delete all the images from the table for the
specific product:
DELETE FROM PicturesTable
WHERE ProductID = '10-11'
and then add the appropriate images:
INSERT INTO PicturesTable (ProductID, Picture)
VALUES ('10-11', 'Dir1/Pic1.gif')
INSERT INTO PicturesTable (ProductID, Picture)
VALUES ('10-11', 'Dir1/Pic2.gif')
INSERT INTO PicturesTable (ProductID, Picture)
VALUES ('10-11', 'Dir1/Pic3.gif')
but I do not like a lot this idea because if a user tries to read the pictures
for that product (at the same time I was deleting them) s/he would get
nothing. Is any other way that I can do it please?
I would appreciate it if someone answers me.
Yours, sincerely
Efthymios Kalyviotis
ekalyviotis@comerclub.gr
View 1 Replies
View Related
Oct 3, 2006
Hi Friends,
I have the following set of Insert Statements that calculates sums for various criteria and inserts a row at a time onto my table.
I have a row for every month starting from January with sums for 4 severity levels. So for 12 months that would be 48 Insert Statements and if I want to do this for 4 different types of [EName] that would be 48 * 4 = 192 Insert Statements. Is there a better way to write this. Thanks for your help
INSERT INTO dbo.tbl_Ticket ([EName], TrendMonth, [Severity Level], [Count])
SELECT 'OVERALL' AS [EName], DATENAME(MONTH, '1/1/06') AS TrendMonth, 1 , Sum([Count])
FROM dbo.tbl_Ticket
WHERE (TrendMonth LIKE 'January' and [Severity Level] = 1)
INSERT INTO dbo.tbl_Ticket ([EName], TrendMonth, [Severity Level], [Count])
SELECT 'OVERALL' AS [EName], DATENAME(MONTH, '1/1/06') AS TrendMonth, 2 , Sum([Count])
FROM dbo.tbl_Ticket
WHERE (TrendMonth LIKE 'January' and [Severity Level] = 2)
INSERT INTO dbo.tbl_Ticket ([EName], TrendMonth, [Severity Level], [Count])
SELECT 'OVERALL' AS [EName], DATENAME(MONTH, '1/1/06') AS TrendMonth, 3 , Sum([Count])
FROM dbo.tbl_Ticket
WHERE (TrendMonth LIKE 'January' and [Severity Level] = 3)
INSERT INTO dbo.tbl_Ticket ([EName], TrendMonth, [Severity Level], [Count])
SELECT 'OVERALL' AS [EName], DATENAME(MONTH, '1/1/06') AS TrendMonth, 4 , Sum([Count])
FROM dbo.tbl_Ticket
WHERE (TrendMonth LIKE 'January' and [Severity Level] = 4)
INSERT INTO dbo.tbl_Ticket ([EName], TrendMonth, [Severity Level], [Count])
SELECT 'OVERALL' AS [EName], DATENAME(MONTH, '2/1/06') AS TrendMonth, 1 , Sum([Count])
FROM dbo.tbl_Ticket
WHERE (TrendMonth LIKE 'February' and [Severity Level] = 1)
INSERT INTO dbo.tbl_Ticket ([EName], TrendMonth, [Severity Level], [Count])
SELECT 'OVERALL' AS [EName], DATENAME(MONTH, '2/1/06') AS TrendMonth, 2 , Sum([Count])
FROM dbo.tbl_Ticket
WHERE (TrendMonth LIKE 'February' and [Severity Level] = 2)
INSERT INTO dbo.tbl_Ticket ([EName], TrendMonth, [Severity Level], [Count])
SELECT 'OVERALL' AS [EName], DATENAME(MONTH, '2/1/06') AS TrendMonth, 3 , Sum([Count])
FROM dbo.tbl_Ticket
WHERE (TrendMonth LIKE 'February' and [Severity Level] = 3)
INSERT INTO dbo.tbl_Ticket ([EName], TrendMonth, [Severity Level], [Count])
SELECT 'OVERALL' AS [EName], DATENAME(MONTH, '2/1/06') AS TrendMonth, 4 , Sum([Count])
FROM dbo.tbl_Ticket
WHERE (TrendMonth LIKE 'February' and [Severity Level] = 4)
View 2 Replies
View Related
Jan 20, 2003
Hey guys...
I just made a little proc to generate inserts for a given table. Sadly, it contains two cursors... :(
Can any of you guys come up with a way without cursors?
Here's the proc:
create proc generate_inserts @table varchar(20)
--Generate inserts for table @table
AS
declare @cols varchar(1000)
declare @col varchar(50)
set @cols=''
declare colcur
cursor for
select column_name
from information_schema.columns
where table_name=@table
open colcur
fetch next from colcur into @col
while @@fetch_status=0
begin
select @cols = @cols + ', ' + @col
fetch next from colcur into @col
end
close colcur
deallocate colcur
select @cols = substring(@cols, 3, datalength(@cols))
--select @cols
declare @sql varchar(4000)
declare @colname varchar(100),
@coltype varchar(30)
select @sql = 'select replace(''insert ' + @table + ' (' + @cols + ') '
select @sql = @sql + 'values ('''
declare ccur
cursor for
select column_name, data_type
from information_schema.columns
where table_name=@table
open ccur
fetch from ccur into @colname, @coltype
while @@fetch_status=0
begin
if @coltype in ('varchar', 'char', 'datetime')
select @sql=@sql + ''''''
select @sql=@sql + ' + coalesce(convert(varchar, ' + @colname + '), ''null'') + '
if @coltype in ('varchar', 'char', 'datetime')
select @sql=@sql + ''''''
select @sql = @sql + ''', '''
fetch from ccur into @colname, @coltype
end
close ccur
deallocate ccur
select @sql=substring(@sql, 1, datalength(@sql)-3)
select @sql=@sql + ')'', ''''''null'''''', ''null'') from ' + @table
exec (@sql)
View 20 Replies
View Related
Dec 2, 2005
Hello,
I would like to get opinions about the code below and what I can do to improve it. I don't know if I am using the best techniques in this code. I am not running into any problems, but I am assuming there has to be cleaner ways of doing this.
Also I am trying to figure out why the INSERT INTO statement in the query is giving me the error:
"The column prefix '#ttsku' does not match with a table name or alias name used in the query."
The purpose of the code is to select all the item records from a linked server (Non MS SQL) and bring it into a temp table. I did this because I can't create a cursor to the other DB.
Using this temp table, look if the SKU table has the item in it, if it does then update the record, otherwise I need to create the record and fill in the values from the temp table.
Finally I need to delete any records that don't exist in the temp table.
Here is the code:
SELECT
pt_mstr.pt_part as part,
pt_mstr.pt_desc1 as desc1,
dbo.udf_GetEntry(cd_det.cd_cmmt,1,';') as custdesc,
dbo.udf_GetEntry(cd_det.cd_cmmt,2,';') as caformat,
dbo.udf_GetEntry(cd_det.cd_cmmt,3,';') as plformat,
dbo.udf_GetEntry(cd_det.cd_cmmt,6,';') as eaformat,
(pt_mstr.pt__qad24 * pt_mstr.pt__qad25) as pallqty,
case
when um_mstr.um_conv is not null then
round((pt_net_wt / (cast(pt_drwg_loc as numeric) /um_conv)),0)
else
round((pt_net_wt / cast(pt_drwg_loc as numeric)),0)
end as packqty,
pt_mstr.pt_drwg_loc as packsize,
pt_mstr.pt_drwg_size as packum,
dbo.udf_GetEntry(cd_det.cd_cmmt,4,';') as dist1,
dbo.udf_GetEntry(cd_det.cd_cmmt,5,';') as dist2,
pt_mstr.pt_user2 as brand,
pt_mstr.pt__qad24 as ti,
pt_mstr.pt__qad25 as hi,
pt_mstr.pt_status as status
INTO #ttsku
FROM mfgprod..pub.pt_mstr pt_mstr
left join mfgprod..pub.cd_det cd_det on
(cd_det.cd_ref = pt_mstr.pt_part
and cd_det.cd_type = 'MK'
and cd_det.cd_lang = 'US'
and cd_det.cd_seq = 0)
left join mfgprod..pub.um_mstr um_mstr on
(um_mstr.um_um = pt_mstr.pt_net_wt_um
and um_mstr.um_alt_um = pt_drwg_size
and um_mstr.um_part = '')
WHERE pt_part_type = 'FG'
and (pt_status = 'A' or pt_status = 'AMTO')
and (pt_drwg_loc <> '' and pt_drwg_loc <> '0')
declare c_part cursor for
select *
from #ttsku
open c_part
fetch next from c_part
while @@fetch_status = 0
begin
if exists (select *
from sku
where sku.part = #ttsku.part)
BEGIN
update sku
set sku.Desc1 = #ttsku.desc1,
sku.CustDesc = ##ttsku.custdesc
where sku.part = #ttsku.part
END
ELSE BEGIN
insert into sku (sku.part, sku.desc1)
select #ttsku.part, #ttsku.desc1
END
fetch next from c_part
END -- while
close c_part
deallocate c_part
DELETE FROM sku
WHERE not exists (select *
from #ttsku
where #ttsku.part = sku.part)
drop table #ttsku
Thanks again for any help.
Scott
View 3 Replies
View Related
May 31, 2007
Hello all. Got bit of a long winded question here...........so here we go lol.
OK.......ive got data on an Excel spreadsheet. Ive set the spreadsheet up as a linked server and i'm creating a set of insert statements from it by using the following code:
SELECT 'INSERT INTO TRAINREC (COURSE_NAME) VALUES ('''+
EMPLOY_REF + ''', '''+
FROM AtriumDD...['Employee Training Records$']
For most records this generates a correct insert statement.........for example:
INSERT INTO TRAINREC (EMPLOY_REF, COURSE_NAME) VALUES ('153', 'NMA Panel');
However.........my problems start when the value for course name is containes an ' character. If it does the insert statement generated is incorrect. For example:
INSERT INTO TRAINREC (EMPLOY_REF, COURSE_NAME) VALUES ('139', 'Annual Accounting in Lloyd's Market');
can anyone suggest any ideas on how to get round this? Also if i havent explained it clearly enough just let me know and i can try and expand on it.
Thanks for reading.
View 5 Replies
View Related
Feb 14, 2008
Hi,
I want to prepare insert statements for the data of all tables in my database.
I want this to create seed data. Just by using those scripts i can insert the data in another db.
Please suggest ho wto prepare in easy way.
Thanks in advance.
View 2 Replies
View Related
Nov 13, 2006
Is it possible to export data from tables to SQL insert statements? Got SQL 2005 developer, visual studio 2005, and Visio enterprise architect, if that makes any difference. I already found this tool but it costs money.
View 1 Replies
View Related
May 9, 2008
I rememeber they used to have this option to generate data script for the table in SQL 2000, but I can not find it in SQL 2005.
I need to move one table from one database to another, but I need to generate SQL Insert Statements...
View 12 Replies
View Related
Jun 8, 2004
I'm using the following code to add some data to a table:
Dim rand As Random = New Random
Dim num As Int32 = rand.Next(10000000)
Dim strConn as string = "......."
Dim sql as string = "INSERT INTO tblitemid (itemid, userid, datetime, supplier, comment, commenttype, uniqueid) VALUES ('" & label1.Text & "', '" & user.identity.name & "', '"& System.DateTime.Now & "','3763' ,'" & textbox1.text & "' , 'C' ,'" & num & "')"
Dim conn as New SQLConnection(strConn)
Dim Cmd as New SQLCommand(sql, conn)
Try
conn.Open()
Catch SQLExp as SQLException
Response.Write ("An SQL Server Error Occurred: " & e.toString())
Finally
cmd.ExecuteNonQuery
conn.Close()
End Try
As far as I can tell the code works fine. But for some odd reason I click the button, the code execute and the page closes as it should, but the data is never inserted into the database. I cant really seem to pick up on any paterns for why this would be happening. As a rough guess I'd say it doesnt insert the data 1 out of every 5 times or so it seems. Anyone every have any experience with this? Any comments would be helpful, cuz I'm at a loss.
If youd like to see more code let me know....
Thanks,
Scott
View 3 Replies
View Related
Mar 19, 2001
Is this a limitation of SQL server. I am running a quite complex sp that I wrote which uses exec to execute an SQL string. Running the SP produces the desired results but if I try to use this sp with an insert statement then I get an error message that exec cannot be nested in an insert statement.....any help would be appreciated
View 2 Replies
View Related
Apr 8, 2008
Our existing DW's ETL was written in a very complex fashion by the previous team. They use DTS package lookups to read a row in the Source SQL Server database see if that row exists in the taget SQL Server database. If the row does not exist, they use ActiveX scripts to INSERT the row in the target SQL Server database. If it exists, they update the row on the target side. How would you do this in SSIS? Apologize if this sounds like a basic question, however, I would have done this via Stored Procedures or SQL Scripts especially since it involves SQL Servers alone. Appreciate any help.
View 6 Replies
View Related
Jan 22, 2008
Hi all,
I am looking to transfer a database to another db but I just need to copy the data (not drop the tables and recreate them). Is this possible?
I was thinking of backing up the database in a set of insert statements in a file and execute this file to get the desired result. Or alternatively, to use a data flow task with multiple tables if possible.
Hope there is a way.
Thanks,
Yannis
View 22 Replies
View Related
Aug 24, 2007
I have a file with about 600,000 lines of insert statement given to me by a developer.
There are basically 5 inserts into different tables for each Product or Item. Each Insert MUST run in the order specified and must complete before the next insert runs,
To complicate things further, there are triggers that fire on every insert and each trigger must complete its transaction before the next insert starts.
What is the best and most efficient way to run the inserts, while ensuring that each statement completes before the next.
Tried using Serialization but appears some of the transactions overlap and generate errors.
Tried disabling the triggers but run into other problems.
At this point I am tempted to run each statement manually
Thanks All for you help and input.
View 1 Replies
View Related
Aug 29, 2006
hi
first of all is it possible? if so, what am i doing wrong with this
INSERT into TB2
(
ClientCode,
EngagementCode,
EngagementDescription
)
SELECT
(SELECT dbo.tarCustomer.CustID
FROM dbo.tPA00175 INNER JOIN
dbo.tarCustomer ON dbo.tPA00175.CustKey = dbo.tarCustomer.CustKey INNER JOIN
dbo.tPA00007 ON dbo.tPA00175.intJobKey = dbo.tPA00007.intJobKey),
NULL,
SELECT
(SELECT dbo.tPA00175.chrJobNumber
FROM dbo.tPA00175 INNER JOIN
dbo.tarCustomer ON dbo.tPA00175.CustKey = dbo.tarCustomer.CustKey INNER JOIN
dbo.tPA00007 ON dbo.tPA00175.intJobKey = dbo.tPA00007.intJobKey)
the first select statement for works fine, but the second one and all after i get a syntax error near 'select'.
this is just a shortened version of the statement. how would i run select statements for a table to be inserted into with different column names. also with items that are hard coded like the 'null'. thanks
tibor
View 5 Replies
View Related
Mar 11, 2004
When working from within VB, should i be using Insert or Update statements, or should i pass the values to a stored proc that does it for me.
thanks
View 14 Replies
View Related
Feb 9, 2007
Hello!I have a developer that is playing around with some SQL statementsusing VB.NET. He has a test table in a SQL 2000 database, and he hasabout 2000 generated INSERT statements.When the 2000 INSERT statements are run in SQL query analyzer, all2000 rows are added to the table. When he tries to send the 2000statements to SQL Server through his app., a random number ofstatements do not get executed. But, SQL Profiler shows that each ofthe 2000 statements are getting sent to the server.I suggested that he add a "GO" statement at the end of the INSERTblock, but the statement fails when that is sent to the server.I know that this is not the ideal manner to insert bulk data to thesystem, but now we are all just curious as to why SQL server doesn'texecute each individual INSERT.Any thoughts?
View 3 Replies
View Related
Jul 20, 2005
I'd I have a problem I'd like to post CREATE TABLE and INSERT statementsthat will create my table and insert data into the table.I can use the scripting feature in Enterprise Manager to generate CREATETABLE scripts.Is there a script I can run that will generate INSERT statements so I caninclude sample data.Thanks
View 1 Replies
View Related
Aug 25, 2007
Hello All,
How are you guys doing? Hope all is well.
This is my problem...I accidentally deleted a bunch of my SQL scripts and would like to generate the INSERT statements from Management Studio. I am currently using SQLExpress. Is there a way I can accomprish my task? Kindly advise.
Thanks a bunch!
Mohammed
View 8 Replies
View Related
Apr 21, 2007
Hi, I just want you to know that I am very young in ASP.NET world so please bear with me.I have been looking for an answer to my problem, but unfortunately I couldn’t find one. So I created a user here on www.asp.net just for making this post.
Before I continue I just want to apologies if there is another post where this question is already answered.
Please watch this Print Screen I just took: � http://www.bewarmaronsi.com/Capture.JPG “
As you can see the “INSERT, UPDATE, and DELETE Statements� are disabled, and that’s exactly my problem. I tried with an MS access database and it works perfect, but when I use a MS SQL database this field gets disabled for some reason.
The MDF file is located in the App_data folder and is called ASPNETDB.
And when I try to add custom SQL statements, it gives me Syntax error near “=�. Something like that. I bought the Total Training Set1 package and it works perfect in their examples.
I just want to thank you for reading my post and I hope that you got some useful information for me.
By the way, I’, from Sweden so you have to excuse me if my English is rusty.
Thanks!
PS: Can it be that I’m running windows Vista?
View 4 Replies
View Related
Mar 26, 2008
I have problem in using the SQLDataSource. When in VS 2005 I drag and drop the SQLDataSource onto my page and then add a GridView control.I bind the GridView control to the SQLDataSource control. But the problem is it does not generate the INSERT, UPDATE, and DELETE statements. The dialog box is inactive. The screenshots may help. please help me in this regard. I also tried it for Accesscontrol but the same problem. Sorry for my poor English!. thanks in advance
the screenshot links:
http://img139.imagevenue.com/img.php?image=28285_2_122_937lo.JPGhttp://img205.imagevenue.com/img.php?image=27550_1_122_203lo.JPG
View 7 Replies
View Related
Oct 25, 2004
Auditors want us to track when Insert, Update and Delete failures occur. Is this possible in SQL 2000?
They also want us to track schema changes. Is this possible?
Thanks, Dave
View 5 Replies
View Related
Mar 10, 2015
See pic
Syntax on using BCP.
Here is my Requirements: I have a file that has a bunch of INSERT STATEMENTS. So the stuff inside the file looks like the following:
File has about 5000 rows.
INSERT INTO abc ( name ) VALUES ( 'Peter' );
INSERT INTO abc ( name ) VALUES ( 'Bob' );
View 2 Replies
View Related
Oct 13, 2015
There is a valuable script out there that will take the rows from a table and display INSERT STATEMENTS.
Good thing is this script converts the data to HEXADECIMAL ( or some other ) and we don't have to worry about dealing with apostrophies embedded in varchar fields.
View 5 Replies
View Related
Apr 14, 2008
Hi all,
Could someone tell me how to get the data from all tables of the database in the form of insert script? We are moving our databse from SQL Server 2000 to SQL Server 2005. The scripts for the Database, Tables, Views , Procedures, Functions have been obtained and it is only the data that is remaining. Some are small tables with 5 to 6 columns but there are some with 50 odd columns. A friend of mine told me about a procedure that returns a dataset with INSERT statements by passing a table name as a parameter. Such procedure would be of great help.
Thank you
View 5 Replies
View Related
Jul 20, 2006
Hi,I'm new to ASP.NET and having a problem configuring the SqlDataSource control. I am using the standard ASP.NET 2.0 "aspnetdb" database to manage user accounts. The problem is this:When using the wizard to configure my SqlDataSource control, the option to auto-generate the Insert/Update/Delete SQL statements are grayed out. I've searched this forum and found that this can be a symptom of no primary keys in the tables. However, there are primary keys (UserId), which is the default schema as generated by asp.net (aspnet_regsql.exe). When I use the wizard, I make the following choices:How would you like to retrieve data from your database?-> Select "Specify columns from a table or view"-> Select the "vw_aspnet_MembershipUsers" view from the "Name:" drop-down list-> Select "UserId", "Email", "UserName" from "Columns:"After this, still no option to auto-generate I/U/D statements. Any thoughts on why this isn't working??? Thanks,Leah.
View 1 Replies
View Related
Jun 10, 2014
How to create insert statements of the data from a table for top 'n' rows. I know we can create using generate scripts wizard, but we can't customize the number of rows. In my scenario i got a database with 10 tables where every table got millions of records, but the requirement is to sample out only top 10000 records from each table.
I am planning to generate table CREATE statements from GENERATE Scripts wizard and add this INSERT STATEMENT at the bottom.
EX : INSERT [dbo].[table] ([SERIALID], [BATCHID] VALUES (126751, '9100278GC4PM1', )
View 4 Replies
View Related
May 30, 2013
I have a database which will be generated via script. However there are some tables with default data that need to exist on the database.I was wondering if there could be a program that could generate inserts statments for the data in a table.I know about the import / export program that comes with SQL but it doesnt have an interface that lets you copy the insert script and values into an SQL file (or does it?)
View 7 Replies
View Related
