Power Pivot :: Change Y Axis Scale In PowerView

Aug 20, 2015

I created the below graph in PowerView. The Y axis shows values in % but I want to change this to millions. How do I do this?The Y axis value is the result of a calculation that is formatted as currency in the PowerPivot Manager.

View 2 Replies


Power Pivot :: PowerView Error While Loading Model In SharePoint

Jun 24, 2015

I am getting this exception "An error occurred while loading the model for the item or data source '<filename.extension'>.  Verify that the connection information is correct and that you have permissions to access the data source."" when I click in Power View icon in Power Pivot Gallery SharePoint.I tried steps mention this TechNet article but the issue is still not resolved.URL...

View 2 Replies View Related

Power Pivot :: Transferring PowerView Sheets To Another Excel Binder

May 7, 2015

I just installed PowerView and PowerPivot, I made my queries, formulas, I put everything in a PowerView sheet in a Excel Binder.

Other colleagues did the same but worked on a different binder.

Question is: how can i merge those two binders in order to have, in a unique file, all my Powerview sheets?

View 3 Replies View Related

Power Pivot :: Empty Data Model Powerview Report

Oct 5, 2015

I need to create a data model for powerview report but I don't have data right now. The data will be loaded later after I create the report. What technique should I use??

View 2 Replies View Related

Power Pivot :: How To Customize X-axis Of Power BI Dashboard

Aug 26, 2015

I want to show on Power BI Dashboard a moving average - for example, I want to always show the last 30 measurement of body temperature but it looks like Power BI dashboard shows all measurements I have and compress them - which makes the dashboard ugly.

I tried to customize the X-axis properties but I dont know what I should change the default start/stop properties to (where the default property value is automatic).


View 3 Replies View Related

How Change The Scale Of X Axis?

Mar 29, 2007

Hi, how do I change the scale of x axis to a larger time scale than the data ?

Data is in quarters and I want that to be displayed in a line graph, but I want the labels to show hours

(it becomes messy otherwise when showing several days)

Thank You,



View 4 Replies View Related

Power Pivot :: Accumulative Change For Index

May 13, 2015

I am tracking FX changes for USD Vs other currencies. I want to allow my users to choose a Start date and an End date and see the accumulative % Change for the index in a line chart (baseline set as Start date). Additional Q - I prefer the dates slicer to be from "Timeline" type instead of 2 regular slicers. 

View 5 Replies View Related

Power Pivot :: Using VBA To Add Or Change Data Connection

Mar 4, 2014

My PowerPivot report is using quite large data that can be split by subsidiary. I’d like to let user select subsidiary. The selection would trigger change of the PowerPivot’s data connection so that the SQL would change into “SELECT

WHERE Subsdiary
= 'selected subsidiary'”.

The Excel 2013 has Model class that should manage the PowerPivot data sources. The object explorer shows CreateModelWorkbookConnection method, but I can't figure out the VBA syntax.

View 5 Replies View Related

Power Pivot :: How To Change Data Source For Model

Feb 25, 2014

I have an Excel 2013 file with lots of DAX connected to an Azure database. I'd like to reuse all that work by changing the data source for the PowerPivot model to a different database which is an exact copy (just empty) on the same server, but Excel won't let me. In PowerPivot I can change the database connection, the user ID and password as well as the connections name. When opening each table properties (inside PowerPivot model) the new connection is used and all old data is removed, but as soon as I refresh using Existing connections, both from PowerPivot or from the Excel Data tab, the old connection is used and old data is reloaded.

If I use Existing connections from inside PowerPivot, I can se that the new connection is highlighted and has the correct variable, but I think maybe that one is run first, then the old one is run afterwards (or something like that).

On the Excel Data tab, I can see that the old connection is the only one Excel itself seems to know about, but I cannot change anything there as it's read-only.

There must be a way to change this. Even with copy and paste it would take me days to recreate this Excel file from scratch and it would be a serious flaw and reduction of usability for PowerPivot.

View 10 Replies View Related

Power Pivot :: Running Total For Hours Resetting On Change Of Field?

Oct 23, 2015

I have a table called PJLabDet.Total_Hrs which is the sum of hours of 7 days.

I would like to get a running total for this field which would reset when my group (called PJLabDat.pjt_entity) changes.

View 2 Replies View Related

Power Pivot :: Show Images In Power View With Power Query On Excel Desktop Version / Office 365

Aug 2, 2015

I am trying to show images in a product listing in power view.I work with an excel 2013 desktop version based on an office 365 pro account.I did the following steps:

import of an excel file with an article list via power query and loading the data to the data model import jpg images from a folder via power query, setting content as binary type and loading the data to the data modellinking both tables in power pivot--> manage via the image namesetting the table behavior for the images table under power pivot --> manage --> Advanced (e.g. Default Image: Content)opening power view and building article cards with article number and imageProblem: only a camera icon shows up in power view

Is there a solution with a desktop version?Can I use my Office 365 Pro account to make it work? How?Why is there no solution showing images in a pivot table?Link to Dropbox with power pivot files 

View 9 Replies View Related

Power Pivot :: How To Change / Edit Excel Workbook Data Connection String

May 28, 2014

One of my excel 2013 power pivot report was migrated from old server to new server after migration i changed the excel power pivot connection string to connect with new server but the workbook connections is still taking the old connection string of old server and there is no option of changing workbook connection string .

I am able to edit the powerpivot connection but workbook connections are not getting updated they are still taking old server connection string.

View 12 Replies View Related

Minimum Scale Of Y-axis Ignored When Using Negative Value

May 21, 2007

I want to display a chart with a minimum y-axis of -10%. When use the value -0.10 the result is a minimum of -100%. Is this a bug?


View 2 Replies View Related

Colouring The Chart Plot Area Based On X-axis Scale

May 3, 2007


I have a report based on a line chart.

The values on X-axis are scaled from -100 to +100. I want to colour the band from -100 to 0 with red colour and that from 0 to +100 in green colour, and i want to provide legend for these bands/sections. How can i do this?

A prompt response would be really appreciated

Thanks a lot!!


View 1 Replies View Related

Creating Line Chart Expession Based Y-Axis Scale Values

Feb 28, 2008

I need to know what means are available to change the Minimum and Maximum Y-Axis scale values rather than leave them simply as they are in the properties.
Right now whatever min/max values I enter into the scale for the Y-Axis are unchangeable.
I need to be able to change the min/max scale values based on the value of the data at run time.

Any help is appreciated.


View 6 Replies View Related

Power Pivot :: Create Power View Report - Button Does Not Show Up For Some Reports

Nov 3, 2015

I have several reports in a Power View Gallery. In Gallery view, most of the reports show the "Open New Excel Workbook", the "Create Power View Report", and the "Manage Data Refresh" buttons on the right side of the report list. Why would some reports not have these buttons available? In the attached image you can see one report with the buttons and one without the buttons.

View 5 Replies View Related

Power Pivot :: Power Query Error Expression / Cannot Convert The Value To Type Text

Jul 20, 2015

I've imported a number of excel sheets into a Power Query Table. All seems to appear ok until I load the data. Of the 15k rows around 2k have a similar error where it cannot convert an integer to type string as below example

Expression.Error: We cannot convert the value 40 to type Text.

The columns in question are all of integer type, I've looked through the M query and there is no conversion to string taking placeThe values where we don't get the error are also integers hence the intriguing question is why does the error occur on a subset and not the others. I suspect there is a limit to the number of errors also somewhere internally M query is converting the column to text for some reason.

View 2 Replies View Related

Power Pivot :: IF In Power Query Statement - Converting Text To Numbers

Nov 18, 2015

Slow loading issue with an if statement. In the raw data the field [Location] is a text field e.g. 0010. I have a parameterised query that get a Location_Value from Excel and passes it to the PQ query using:

#"Filtered Rows1" = Table.SelectRows(#"Removed Other Columns", each ([SalesMode] = 0) and ([SalesType] = 0) and ([Location] = Location_Value))

This works fine if you chose a single location.  However I wanted to be able to select all locations and text is horrible to work with so in PQ I used the change type function to change the location column into whole numbers. I changed excel to also pass a number as Location_Value.   I was therefore surprised when the same query took 2.5 times longer to refresh????

My PQ now looks like this

  #"Changed Type" = Table.TransformColumnTypes(#"Removed Other Columns",{{"Location", Int64.Type}}),
    #"Filtered Rows1" = Table.SelectRows(#"Changed Type", each ([SalesMode] = 0) and ([SalesType] = 0) and ([Location] = Location_Value))

I'm wondering if I need to do something to the ([Location] = Location_Value) bit as maybe it still thinks [Loation] is text and it is trying to compare it to a number. I st assumed the step above meant that [Location] was now a number, but maybe you still have wrap it with some kind of VALUES or TEXT function?

View 9 Replies View Related

Power Point :: How To Generate Rank Based On Some Group In Power Pivot

Apr 10, 2015

I have data like below

Country     State            Rank
India         Kerala            1
India         Kerala            2
India         Kerala            3
India         Tamil Nadu     1
India         Tamil Nadu     2
India         Orissa            1
India         Orissa            2
US            Florida            1
US            Florida             2
US            NewYork         1

I have to generate rank like this in power pivot. How can I achieve it?

View 3 Replies View Related

Power Pivot :: Error When Updating From Power Query Source

Jun 11, 2015

When updating a Power Query Source in Power Pivot, I'm getting the following error message:

Basically saying that OLE DB or ODBC-error occured when:

- Connections have been imported from a different workbook or
- the workbook has been created in a newer Version of Excel

None of which is the case here. What can cause this?

System: Virtual machine (VMware) on Windows 2008 R2, Office 2010, 64bit, using temporary profile.

View 5 Replies View Related

Power Pivot :: How To Set Refresh For Excel File Uploaded In Power Bi

Sep 9, 2015

I have opened an account in [URL] and taken the 60 days trial for power bi pro. I've developed power pivot and generated power views in share point 2013. But, I'm new to Power BI desktop. I have created a report in power BI desktop and published to [URL]. Also, I have uploaded an excel file directly to [URL] and created the report from the workspace available there itself and pinned the report to dashboard also. Everything is fine till this. But, I need to refresh the file which I have uploaded. I have some dummy data in excel sheet.

ZipCode State ZipName

2345 AA AA
456 BB BB
6787 CC CC

 This has been created as a table and then added to data model. So, power pivot has been created for the same. Then I have uploaded this file to [URL] site. But, I'm getting an error message while trying to schedule refresh for the same.

"You cannot schedule refresh for this dataset because it does not contain data model connections. You cannot schedule refresh on worksheet connections or linked tables. To schedule refresh the data must be loaded into the data model."

How can I create a data model connection? How can I schedule refresh for an excel file like this?

View 3 Replies View Related

Power Pivot :: Power View - Mix Series Types On Same Chart

Jul 25, 2015

I'm a relative newcomer to Power View. I've been playing with charts and have been struggling to combine both line and bar on the same chart. It would appear this functionality is not available. Considering this is basic functionality when it comes to charting, how to achieve this....

View 3 Replies View Related

Power Pivot :: Power Query Conditional Text Replacement

Jul 16, 2015

I'm looking to replace text in a given column given a set of conditions in the other columns. Please see below the M query in the advance editor and in particular the bold text. Here I've created a new entry that would appear in the query applied steps window in the power query editor that I have called "Replace Values". The logic is if Data.Column4 column equals "London" then replace null values in Data.Column5 with London. However when I save the query below I get the error 

Expression.Error: There is an unknown identifier. Did you use the [field] shorthand for a _[field] outside of an 'each' expression?

I plan to change the expression to test for multiple conditions however I need to get the basic expression working first. The other frustration i had with the "if" statement is it had to have an else even though I didn't require it, am i doing something wrong here?

FullFilePath = "C:PermanentDwellings.xlsx",
Source = Excel.Workbook(File.Contents(FullFilePath)),
    #"Expanded Data" = Table.ExpandTableColumn(Source, "Data", {"Column1", "Column10", "Column11", "Column12", "Column13", "Column14", "Column15", "Column16",

[Code] ....

View 8 Replies View Related

Power Pivot :: One Slicer To Control Two Pivot Tables That Have Different Source Data And Common Key

Jul 8, 2015

I have two data tables:

1) Production data with column headers: Key, Facility, Line, Time, Output
2) Costs data with column headers: Key, Site, Cost Center, Time, Cost

The tables have a common key named obviously as Key. The data looks like this:


I would like to have two pivot tables which I can filter with ONE slicer based on the column Key. The first pivot table shows row labels Facility, Line and column labels Time. Value field is Output. The second pivot table shows row labels Site, Cost Center, and column lables Time. Value field is Cost.How can I do this with Power Pivot? I tried by linking both tables above to a table with unique Keys in PowerPivot and then creating a PivotTable where I would have used the Key from the Keys table.

View 5 Replies View Related

Power Pivot :: Force Measure To Be Visible For All Rows In Pivot Table Even When There Is No Data?

Oct 13, 2015

Can I force the following measure to be visible for all rows in a pivot table?

Sales Special Visibility:=IF(
        VALUES(dimSalesCompanies[SalesCompany]) = "Sales"

FYI, I also have other measures as well in the pivot table that I don't want to affect.

View 3 Replies View Related

Power Pivot :: ALL DAX Function Not Overriding Filter On Pivot Table

Oct 14, 2015

I have a simple pivot table (screenshot below) that has two variables on it: one for entry year and another for 6 month time intervals. I have very simple DAX functions that count rows to determine the population N (denominator), the number of records in the time intervals (numerator) and the simple percent of those two numbers.

The problem that I am having is that the function for the population N is not overriding the time interval on the pivot table when I use an ALL function to do so. I use ALL in other very simple pivot tables to do the same thing and it works fine.

The formula for all three are below, but the one that is the issue is the population N formula. Why ALL would not work, any other way to override the time period variable on the pivot table.

Population N (denominator):
Records in time interval (numerator):

View 13 Replies View Related

Power Pivot :: How To Apply Min Formula Under New Measure Within A Pivot Table

Aug 17, 2015

How can I apply "Min" formula under a "new measure" (calculated field) within a pivot table under Power pivot 2010?Can see that neither does it allow me to apply "min" formula directly "formula box" nor could find any other option.Intent formula: "=Min(1,sum(a:b))" this isn't allowed so all I can do is "=sum(a:b)".

View 3 Replies View Related

Power Pivot :: Displaying Cumulating Numbers In A Pivot Table When There Is No Value

Mar 11, 2015

I have simple pivot table (below screenshot with info redacted) that displays a population number ("N" below), this is the denominator, a cumulative numerator number (below "#") and a simple cumulative percent that just divides the numerator by the denominator. It cumulates from top to bottom. The numerator and percent are cumulative using the below functions. There are two problems with the numerator and percent:

1. When there is not a number for the numerator, there is no value displayed for both the numerator and the percent..There should be a zero displayed for both values.
2. When there has been a prior number for the numerator and percent (for a prior month interval) but there is no number for the numerator in the current month interval, the prior month number and percent are not displayed in the current month interval--see the 3rd yellow line, this should display "3" and "16.7%" from the second yellow line.Here is the formula for the numerator:

=CALCULATE(count(s1Perm1[entity_id]),FILTER(ALL(s1Perm1[ExitMonthCategory]),s1Perm1[ExitMonthCategory] <= MAX(s1Perm1[ExitMonthCategory])))
Here is the formula for the percent:
=(CALCULATE(countrows(s1Perm1),FILTER(ALL(s1Perm1[ExitMonthCategory]),s1Perm1[ExitMonthCategory] <= MAX(s1Perm1[ExitMonthCategory]))))/(CALCULATE(COUNTROWS(s1Perm1),ALL(s1Perm1[Exit],s1Perm1[ExitMonthCategory])))

View 24 Replies View Related

Power Pivot :: Power BI Desktop As Backend

Sep 29, 2015

We are trying to build dashboards using Power BI desktop version with Power Pivot data model as a back end. To import the data to Power BI,we used Import ->Excel workbook contents option and successfully imported the model to Power BI .When I tried to refresh the Power BI,It's hitting the backend tables available in the power Pivot model. But my requirement is I need to refresh the Power BI from the power Pivot Datamodel(I'm expecting an option like Import from Power Pivot in Tableau).

View 10 Replies View Related

Power Pivot :: Slicers Won't Print In Power BI

Apr 18, 2015

One big reason why we have turned to Power BI for Office 365 is to share Power Pivot models with our senior executives who all use Macs.

While they have been able to successfully view the Power Pivot models and interact with the Slicers in Power BI, they have not been able to print the reports. We thought it was a Mac issue but it's happening on PCs too. There doesn’t seem to be a way to resize the report so that all columns print. So we then tried to click on the tiny button located in the bottom right corner that says “View Full-Size Workbook.” The file then opens up in Excel Online. Then when we click on the printer icon, we see the report but the slicer becomes invisible. When printing, all columns do show up however the slicer is invisible.

How to successfully print Power Pivot reports with slicers in Power BI?

View 2 Replies View Related

Power Pivot :: Measures Not Reflected In Pivot Table

Sep 18, 2015

I have data in my Powerpivot window which was generated by a sql query. This data includes a field named 'Cost' and every row shows a value for 'Cost' greater than zero. The problem is that when I display this data in the pivot table all entries for Cost display as $0. At first I thought that maybe Cost was set to a bogus data type (such as 'text) but it is set to ''Decimal Number' so that's not the problem. 

What is happening and how do I fix it so that my pivot table reflects the values for 'Cost'?

View 3 Replies View Related

Power Pivot :: Difference Between Two Pivot Table Sums?

Nov 23, 2015

I have a data table that contains budget and actual data by month.  I use the data to create a pivot that shows actual results next to budgeted results.  I need a column that shows that variance between those columns.  I think my issue is that the "Type" field contains actual and Budget.  I sum on "Type".  I can't seem to create a sum since those items are in the same field or am I missing something?

Table design


Output Design

125 AvgOfRate

View 4 Replies View Related

Power Pivot :: Slicer And Pivot Table Value Order

Oct 9, 2015

How to get a list of values to actually display in correct order in either a slicer or when on an axis on a pivot table?

I currently have the below list and have tried to add a preceding numeric (ex. "1. <=0") or preceding blank space, neither of which is visually great. Is there another way?

<= 0
1 - 6
7 - 12
13 - 18
19 - 24
25 - 30
31 - 36
37 - 42
43 - 48
49 - 54
55 - 60
61 - 66
67 - 72
73 - 78
79 - 84
85 - 90
91 - 96
97 - 102
> 102

View 8 Replies View Related

Copyrights 2005-15 www.BigResource.com, All rights reserved