I have a text file which I used as an initial load of data, containing a little over a million rows. I would like to produce a daily "update" file, which contains changes to existing rows, and creation of new rows. What is the best method of updating the existing table in power pivot?
View 2 RepliesThis is primarily a question for DAX/Power BI. I'm trying to figure out how to count rows for a particular column where only a specific value exist. For instance, I'm trying to count how many times a certain field contains a true value or false value across multiple columns.
I found this formula here: [URL] ....
=CALCULATE(COUNTROWS('table'), ALLEXCEPT('table', 'table'[n_country]))
However, I'm not quite sure how to adapt it to count only rows where a value is equal to True, False, 17, "foobar", etc...
Can I force the following measure to be visible for all rows in a pivot table?
Sales Special Visibility:=IF(
HASONEVALUE(dimSalesCompanies[SalesCompany])
;IF(
VALUES(dimSalesCompanies[SalesCompany]) = "Sales"
;CALCULATE([Sales];ALL(dimSalesCompanies[SalesCompany]))
;[Sales]
)
;BLANK()
)
FYI, I also have other measures as well in the pivot table that I don't want to affect.
I have a table with all my orders lines, I need to identify (DAX formula) for a specific customer which is the first order of a specific article (first date filtered for customer and article) and use this information to tag the order line for that article for the specific customer as "Newly Ordered article" if the order date = first order date or as "Reordered article" if the date on the specific order line is subsequent to the first order date.
I imagine I need to combine a Lookup date filtered for customer and article and use it with a IF formula.
Similar to this I would also like to define that if the first order for a product for the specific custumer is older then a certain date, then this would be defined as and historical customer for the specific article, if the first order on the article is more recent the a specific date, then this will be defined as "new customer for that article".
I have a sales order table that has customer, sales, product and sales date. I am looking to return the first sales date by customer for a specific product.
SalesTable:
Customer
Product
Sales Date
Sales
First Bike Date
Jon
Bike
12/4/2011
$10.00
[Code] ....
I would like to return the date of the first bike purchase date by each customer and repeat that date for each row and customer. Can I use function to complete? I have a datedim table as well related to the sales date.
In the typical Job Cost Reporting world you can easily create SQL Views / Stored Procedures (or create a report) that can return both Job To Date values along with period values for another date range. Something like this:
Job,
Phase of Work,
Cost Type,
UM,
Budgeted Cost,
Budgeted Quantity,
Period Cost,
Period Quantity,
Period Unit Cost,
JTD Cost,
JTD Quanity,
JTD Unit Cost,
Variance between JTD and Period Cost,
Variance between JTD and Period Quantity,
Variance between JTD and Period Unit Cost
But in the tabular BI world I am not certain how to have these values show up in a pivot table or BI visualization. My current Fact table is essentially every job cost transaction so it is at the most granular level holding Company, Job, Phase of Work, UM, Cost Type, Date, Budget Cost, Budget Quantity, Actual Cost, Actual Quantity. The Budget values only have a value if the entry was updating the budget and the Actual values hold actual cost for each transaction. If you don't restrict by date you have your Budgeted Quantity / Cost and Job To date Cost / Quantity.
I can generate a Pivot table or chart and not restrict by date and I can get all the Budget Totals and the Job To Date Totals when I have the Company, Job, Phase Of Work, Cost Type.
But what if I want to look at a range like last quarter or yesterday or last week. I can indeed filter that data in Pivot Table and get the period values, but now I don't know how to have the Job To Date values show up for comparison purposes.
I am guessing maybe a DAX formula (if using Excel Powerpivot or SQL Tabular Model), but I am at a loss.
So in the BI world how do you get Job To Date totals while also viewing the data for a period of time?
Here are some example graphs we would want to show for a single Job. Let's say we want to show the 10 worst performing cost distributions.
I would want a graph to show the cost distribution and for each cost distribution it would show Budgeted Cost, Period Cost, Job To Date Cost.I would want a graph to show the cost distribution and for each cost distribution it would show Budgeted Unit / Cost, Period Unit / Cost, Job To Date Unit / Cost.I would want a graph to show the cost distribution and the variance between JTD and Budget and Period and Budget.
As you can see it all stems around seeing JTD and Budget values vs Period Values. Here is a visualization that may work. I am using PivotTable filtered on one Company, Job, Phase of Work. I can see the sum of actual cost which is the totals for the date range I provided. But I still want to see the JTD totals for that Phase of Work and Cost Types and actually the Budget Totals as that is sort of a JTD, but for budget... especially if I want to compare Budget vs JTD vs Actual.
Is it possible to generate automatic refresh of excel 2013 table which displays some table of a power pivot model on file open?? I dont want to use pivottable (which supports this ...)
View 2 Replies View RelatedI have a simple pivot table (screenshot below) that has two variables on it: one for entry year and another for 6 month time intervals. I have very simple DAX functions that count rows to determine the population N (denominator), the number of records in the time intervals (numerator) and the simple percent of those two numbers.
The problem that I am having is that the function for the population N is not overriding the time interval on the pivot table when I use an ALL function to do so. I use ALL in other very simple pivot tables to do the same thing and it works fine.
The formula for all three are below, but the one that is the issue is the population N formula. Why ALL would not work, any other way to override the time period variable on the pivot table.
Population N (denominator):
=CALCULATE(COUNTROWS(analyticJudConsist),ALL(analyticJudConsist[CurrentTimeInCare1]))
Records in time interval (numerator):
=COUNTROWS(analyticJudConsist)
Percent:
=[countrows]/[denominatorCare]
How can I apply "Min" formula under a "new measure" (calculated field) within a pivot table under Power pivot 2010?Can see that neither does it allow me to apply "min" formula directly "formula box" nor could find any other option.Intent formula: "=Min(1,sum(a:b))" this isn't allowed so all I can do is "=sum(a:b)".
View 3 Replies View RelatedI have simple pivot table (below screenshot with info redacted) that displays a population number ("N" below), this is the denominator, a cumulative numerator number (below "#") and a simple cumulative percent that just divides the numerator by the denominator. It cumulates from top to bottom. The numerator and percent are cumulative using the below functions. There are two problems with the numerator and percent:
1. When there is not a number for the numerator, there is no value displayed for both the numerator and the percent..There should be a zero displayed for both values.
2. When there has been a prior number for the numerator and percent (for a prior month interval) but there is no number for the numerator in the current month interval, the prior month number and percent are not displayed in the current month interval--see the 3rd yellow line, this should display "3" and "16.7%" from the second yellow line.Here is the formula for the numerator:
=CALCULATE(count(s1Perm1[entity_id]),FILTER(ALL(s1Perm1[ExitMonthCategory]),s1Perm1[ExitMonthCategory] <= MAX(s1Perm1[ExitMonthCategory])))
Here is the formula for the percent:
=(CALCULATE(countrows(s1Perm1),FILTER(ALL(s1Perm1[ExitMonthCategory]),s1Perm1[ExitMonthCategory] <= MAX(s1Perm1[ExitMonthCategory]))))/(CALCULATE(COUNTROWS(s1Perm1),ALL(s1Perm1[Exit],s1Perm1[ExitMonthCategory])))
I have data in my Powerpivot window which was generated by a sql query. This data includes a field named 'Cost' and every row shows a value for 'Cost' greater than zero. The problem is that when I display this data in the pivot table all entries for Cost display as $0. At first I thought that maybe Cost was set to a bogus data type (such as 'text) but it is set to ''Decimal Number' so that's not the problem.
What is happening and how do I fix it so that my pivot table reflects the values for 'Cost'?
I have a data table that contains budget and actual data by month. I use the data to create a pivot that shows actual results next to budgeted results. I need a column that shows that variance between those columns. I think my issue is that the "Type" field contains actual and Budget. I sum on "Type". I can't seem to create a sum since those items are in the same field or am I missing something?
Table design
Month|Division|Subdivision|Type|Dept|Rate|Units|Amount
October|DC|Day|Budget|125|10.00|100|1000
October|DC|Day|Actual|125|10.00|110|1100
Output Design
DC
DAY
Actual
Budget
125 AvgOfRate
AvgOfRate
SumOfUnits
SumOfUnits
SumOfAmt
SumOfAmt
How to get a list of values to actually display in correct order in either a slicer or when on an axis on a pivot table?
I currently have the below list and have tried to add a preceding numeric (ex. "1. <=0") or preceding blank space, neither of which is visually great. Is there another way?
<= 0
1 - 6
7 - 12
13 - 18
19 - 24
25 - 30
31 - 36
37 - 42
43 - 48
49 - 54
55 - 60
61 - 66
67 - 72
73 - 78
79 - 84
85 - 90
91 - 96
97 - 102
> 102
I am using excel 2010 and creating pivot table from Power Pivot. I created a pivot table with department slicers. All is good, the problem I am having is whilst in an unfiltered position (ALL) of the slicers (departments) I get 200 pages, now when I click on a given department with say 10 pages, I still get the same 200 pages with the first 10 pages showing the data from the clicked department and 190 blank pages.
All I want is to get a WYSIWYG (What you see is what you get) of what is on the screen as my print, but I am getting extra blank pages right after the data. How do I resolve this.
Below are the steps I go thru to print
1. Select slicers in unfiltered position (ALL)
2. Select entire pivot table
3. Select Page layout and select print area.
4. Save
5. Click on Print Preview to preview the print
6. Click on a given department in the slicer and repeat item 5, but this gives me blank pages after the data.
Do I need any other step?
I am trying to show images in a product listing in power view.I work with an excel 2013 desktop version based on an office 365 pro account.I did the following steps:
import of an excel file with an article list via power query and loading the data to the data model import jpg images from a folder via power query, setting content as binary type and loading the data to the data modellinking both tables in power pivot--> manage via the image namesetting the table behavior for the images table under power pivot --> manage --> Advanced (e.g. Default Image: Content)opening power view and building article cards with article number and imageProblem: only a camera icon shows up in power view
Is there a solution with a desktop version?Can I use my Office 365 Pro account to make it work? How?Why is there no solution showing images in a pivot table?Link to Dropbox with power pivot files
I want to count the rows in the Incident Table by using filters to limit the rows to be counted if they meet the below conditions. I know I need a logical test for each row of the incident table based on the apparatus table’s rows. But, I want to test for each row in the incident table, counting, but not returning a true or false in the overall measure.Something like look at each incident row, test for true or false and then count IF the statement is true. Then go to the next incident row and do the same. The aggregation would be the final count of “true” results.I tried this for MET objective:
=CALCULATE(COUNTROWS(incident),
apparatus[Incident Response Time] >-1 ||
apparatus[Incident Response Time] <320,
uv_901APP_TYPE[Description]="Engine",
uv_901INCIDENT[Top_Category]="Fire"
[code]....
I am trying to calculate how much revenue we may get, based on potential new business opportunities. The core fields we have are
Total Contract Value ($ or £)Duration of contract (months)Revenue start dateVarious information about the new business - ID, Title, Customer etc.
We can easily calculate the revenue per month with "Total Contract value divide by duration".
However what I would really like to do is be able to know how much revenue we will be getting each month.
To do this I was thinking we should probably create a new row for each month entry, with the mm-yyyy being the only difference for each row. But how to create the appropriate months and the correct amount of rows.
I've encountered an issue where the ALLSELECTED function works fine unless I use a date hierarchy, i.e. year, quarter, month, date, for the rows in a pivot and then use a year slicer, select one or more years individually, and the clear the filter on the slicer. The year(s) that I selected in the slicer remain at 100% in the pivot instead of returning to the subtotals for the unfiltered slicer.
This only occurs when I use a calendar hierarchy for rows and a date field for the slicer, either from the hierarchy or a regular date field.Below are images of the normal behavior and then the result after following the steps above. Can't figure out why the calendar hierarchy is causing the issue since it works for all other time functions, etc., and follows best practices such as contiguous dates, etc.
I have a pivot table that connects to our data warehouse via a PowerPivot connection. The data contains a bunch of comment fields that are each between 250 and 500 characters. I've set the columns in this pivot table to have the 'Wrap Text' set to true so that the user experience is better, and they can view these comment fields more clearly.
However, whenever I refresh the data, the text wrapping un-sets itself. Interestingly, the 'Wrap Text' setting is still enabled, but I have to go and click it, then click it again to actually wrap the text. This is very burdensome on the user, and degrading the experience.
Any way to make this text wrapping stick so that I don't have to re-set it every time I refresh the data?
The thing is I can´t make update powerpivot, it raises a generic error. Tried to import into ssas tabular and worked fine.
Is there any way to get a better error detail or debug it someway?
I don't know if it's a local issue but I can't use temp table or table variable in a PP query (so not in a stored procedure).
Environment: W7 enterprise desktop 32 + Office 2012 32 + PowerPivot 2012 32
Simple example:
declare @tTable(col1 int)
insert into @tTable(col1) values (1)
select * from @tTable
Works perfectly in SQL Server Management Studio and the database connection is OK to as I may generate PP table using complex (or simple) queries without difficulty.
But when trying to get this same result in a PP table I get an error, idem when replacing table variable by a temporary table.
Message: OLE DB or ODBC error. .... The current operation was cancelled because another operation the the transaction failed.
I cannot create a measure that returns results for dates that do not exist in the fact table despite the fact that the components included in the measure contain valid results for these same dates.Creature a measure that counts the number of days where the "stock qty" is below the "avg monthly sales qty for the last 12 months" (rolling measure).Here is the DAX code I have tried for the measure (note that filter explicitly refers to the date table (called Calendar) and not the fact table):
StkOutCnt:=CALCULATE (
COUNTROWS ( VALUES ( Calendar[DateKey] ) ),
FILTER (
Calendar,
[Stock qty] < [Avg Monthly Sales Qty L12M@SKU]
)
)
Below you can see the sub measures (circled in red) are giving results for all days in the calendar.Highlighted in yellow are dates for which the StkOutCnt measure is not returning a result. Having investigated these blank dates, I am pretty confident that they are dates for which there are no transactions in the fact table (weekends, public holidays etc...).why I am getting an "inner join" with my fact table dates despite the fact that this is not requested anywhere in the dax code and that the two sub measures are behaving normally?
I have two tables in my data model,
1. Fact table with sales by customer, Territory ID etc
2. Table with targets per Territory ID
I want two combine them in one pivot table.
Pivot: Territory;Sales;Target
What I'm getting is the correct column with sales, but the overall sum of all territories in column for targets.Relationship is established between two tables via Territory ID
My PowerPivot workbook, is generating new tables on each refresh.
When opened up the workbook I find a dozen tables named, "Query1", "Query2", "Query3" etc.
It's pulling data from SQL Server.
Here is the data:
ProjectId
Stage
StateStatus
ProjectId
ProjectName
StartDate
P1
S1
Completed
P1
P1Name
31/12/2015
[Code] ...
I want with PowerPivot to tell what stage is in progress for project. I looked at RElatedTable, LOOKUPVALUES, but I can't find a way to associate this to get working. I got however the one telling me which projects are Completed.
Result shall be:
ProjectName StageinProgess
P1Name S2
P2Name S3
P3Name None
have just implement Microsoft Dynamics NAV. and I'm trying to learn how to use this Excellent tool powerpivot add on, But when I'm trying to connect it to any SQL table that support Dynamics NAV I have an error message while downloading the table :"do not have enough memory or I should use Excel 64 bits instead 32 bits".when I check CPU memory Utilization we are just using less tha 20%. I'm working on a remote server and the using Excel 2010.
View 3 Replies View RelatedI want to calculate the target based on Flag value if Flag value is "Y" ....than MAX(Customer Target) else MAX(SLA target).Flag column contains "Y" , "N" and some blank values . Flag, Customer Target and SLA target are the columns in Table1. I have used the below formulas
Target:=IF('Table1'[ Flag]= "Y",MAX('Table1'[Customer Target]),MAX('Table1'[SLA Target]))
Target:=IFERROR(IF('Table1'[Flag]= "Y",MAX('Table1'[Customer Target]),MAX('KPI'[SLA Target])),BLANK())
I have several reports in a Power View Gallery. In Gallery view, most of the reports show the "Open New Excel Workbook", the "Create Power View Report", and the "Manage Data Refresh" buttons on the right side of the report list. Why would some reports not have these buttons available? In the attached image you can see one report with the buttons and one without the buttons.
View 5 Replies View RelatedI've imported a number of excel sheets into a Power Query Table. All seems to appear ok until I load the data. Of the 15k rows around 2k have a similar error where it cannot convert an integer to type string as below example
Expression.Error: We cannot convert the value 40 to type Text.
Details:
Value=40
Type=Type
The columns in question are all of integer type, I've looked through the M query and there is no conversion to string taking placeThe values where we don't get the error are also integers hence the intriguing question is why does the error occur on a subset and not the others. I suspect there is a limit to the number of errors also somewhere internally M query is converting the column to text for some reason.
Slow loading issue with an if statement. In the raw data the field [Location] is a text field e.g. 0010. I have a parameterised query that get a Location_Value from Excel and passes it to the PQ query using:
#"Filtered Rows1" = Table.SelectRows(#"Removed Other Columns", each ([SalesMode] = 0) and ([SalesType] = 0) and ([Location] = Location_Value))
This works fine if you chose a single location. However I wanted to be able to select all locations and text is horrible to work with so in PQ I used the change type function to change the location column into whole numbers. I changed excel to also pass a number as Location_Value. I was therefore surprised when the same query took 2.5 times longer to refresh????
My PQ now looks like this
#"Changed Type" = Table.TransformColumnTypes(#"Removed Other Columns",{{"Location", Int64.Type}}),
#"Filtered Rows1" = Table.SelectRows(#"Changed Type", each ([SalesMode] = 0) and ([SalesType] = 0) and ([Location] = Location_Value))
I'm wondering if I need to do something to the ([Location] = Location_Value) bit as maybe it still thinks [Loation] is text and it is trying to compare it to a number. I st assumed the step above meant that [Location] was now a number, but maybe you still have wrap it with some kind of VALUES or TEXT function?
I have data like below
Country State Rank
India Kerala 1
India Kerala 2
India Kerala 3
India Tamil Nadu 1
India Tamil Nadu 2
India Orissa 1
India Orissa 2
US Florida 1
US Florida 2
US NewYork 1
I have to generate rank like this in power pivot. How can I achieve it?
When updating a Power Query Source in Power Pivot, I'm getting the following error message:
Basically saying that OLE DB or ODBC-error occured when:
- Connections have been imported from a different workbook or
- the workbook has been created in a newer Version of Excel
None of which is the case here. What can cause this?
System: Virtual machine (VMware) on Windows 2008 R2, Office 2010, 64bit, using temporary profile.
I have opened an account in [URL] and taken the 60 days trial for power bi pro. I've developed power pivot and generated power views in share point 2013. But, I'm new to Power BI desktop. I have created a report in power BI desktop and published to [URL]. Also, I have uploaded an excel file directly to [URL] and created the report from the workspace available there itself and pinned the report to dashboard also. Everything is fine till this. But, I need to refresh the file which I have uploaded. I have some dummy data in excel sheet.
ZipCode State ZipName
2345 AA AA
456 BB BB
6787 CC CC
This has been created as a table and then added to data model. So, power pivot has been created for the same. Then I have uploaded this file to [URL] site. But, I'm getting an error message while trying to schedule refresh for the same.
"You cannot schedule refresh for this dataset because it does not contain data model connections. You cannot schedule refresh on worksheet connections or linked tables. To schedule refresh the data must be loaded into the data model."
How can I create a data model connection? How can I schedule refresh for an excel file like this?