I have a report with pie and bar graphs, I have the paper size 16.54 x 11.69 for landsacpe, there are twelve graphs ,two placed side by side , and in the report manager, the appearence is perfect ,spread over six pages. I have Pagebreakatend True for all the graphs. The problem is with printing, on printing , the are tottaly misaligned,any tips are welcome
So I have been asked by our sustainability person to create report from our printing data that actually shows the number of pieces of paper used. This is easy enough for single-sided printing, but when printing in duplex the software does not take into account that 3 printing pages actually equates to 2 pieces of paper. I know this sounds simple, but say I have a print job record that looks like this:
This is a print jobs that if done correctly is actually 21 pages( duplex printing). If the job is say total_pages =5 I cant just divide by 2 because its actually using 3 pieces of paper ( yes they are wanting this data don't ask why). How can I adjust some sql to accurately depict 5 pages, front and back, as 3 pieces of paper?
I have deployed a report that is configured for landscape printing. It does print in landscape, however, only the first seven columns appear on the first page and the other five columns appear on the next page. Is there a method, like in print preview setup in MS Excel, where we can scale down the print (like to 80%) so all columns appear on each page?
Hi, I have created a multi column report (2 columns), which is working fine. However, I need to have a chart on the same report, but it needs to be the width of the page, and not just the width of one column.
If I could put the chart in the report footer / header that would be perfect, but obviously I can't!
Has anyone else come across this, and any ideas / suggestions you have would be appreciated!
It appears to work fine on my end however on my clients end, whenever they try to print a report that displays perfectly within the report viewer to their printer by selecting the printer button in the report it never ends up printing.., however if they go into printer setup and change the page range to print from all pages to just maybe one page and then select the print button it seems to print fine..
The printer seems to receive the information as the light flashes but no page kick out when all pages is selected to print..
I have a need to create a report that has a graph at the top and a table at the bottom. The graph at the top can optionally be made hidden because they cause problems when exported to Excel as images. However, when I set the Hidden property of the graph to true, positions of all items on the report remain absolute. Meaning of course that the table that is located half-way down the page remains half-way down the page and there is a lot of nothing on the first half where the graph used to be.
It would be desirable to have the ability to have the table move up when the graph is not visible, however it obviously doesn't do it automatically and also refuses me the ability to change the position with an expression.
I have a graph in my rdl which retrieves data from database.It works fine in report viewer and also when i export it in PDF and Excel format,but in HTML,it wont show?What could i do about this,i can see in the property that it is looking for the getimage.aspx.I had tried to incorporate the code i have seen from the internet but it seems to me,that the new reporting services now dont have the method renderstream?and what would be my parameters for whatever method that would act as substitute for that missing method..Thanks..
I have a reporting viewer in a windows form that behaves very strange. When I open the form and run the report it shows up nicely in the report viewer. If I print the report it only prints one page. When i print the report a second time the whole report is printed. Next I'll change the report parameters and run the report, then it shows up nicely in the viewer, but when I print the report the first report is printed.
I am facing an issue when report with graph deployed to BI, I can see the misalignment issue in the browser however, when report is run in the Report Builder/SQL Server Data tool or export into PDF then there is no issue.
How to fix the misalignment issue of the graph in the browser. See the both graph below -
Graph Misalignment Issues Screengrab in Browser
Graph without misalignment issue in PDF or Report development tool
I developed a rdlc report. I have a graph chart. Sometimes the value of a label can =0. If the value =0 I want to hide the labelname. However, I also have dummy values =0. This is so that I can have spaces between the bars. The dummy values labels isn't shown in the graph. This works great. I need to add to the expression that if the name of the label isn't dummy but the value =0 to hide the labelname.
The data from sql: Expression in graph under chart data->category groups->category group properties->label: =Microsoft.VisualBasic.Interaction.SWITCH(Fields!LabelName.Value = "aTotalForRetire", "Retirement", Fields!LabelName.Value = "cTotalForRelatives", "Relatives", Fields!LabelName.Value = "eTotalForDisability", "Disability")
The result is below. I want to hide the label relatives as in this example the value=0. It will not always be the case. How can I do that?
I want to select data from a cube using an MDX statement and show the data on a graph report.
I want to select the daily, weekly, monthly and quarterly descriptions all in one column to make it easy to represent it on the report.
Then set the 'Date' Column to the x-axis and the Value column to the y-axis.
The user also must have the option to not show certain periods (Switch of daily and weekly)
My MDX works when I select from the SQL Management Studio but as soon as I copy the MDX over to the SSRS Report Designer is splits the daily, weekly, monthly, quarterly and yearly values into seperate columns which makes it very difficult to report on.
---- Code
SELECT NON EMPTY { ([Measures].[ValueAfterLogic])} ON COLUMNS,
NON EMPTY { [KPI Values].[KPI Name].[KPI Name].ALLMEMBERS * ORDER(
CASE 1 WHEN 1 Then [Time].[Hierarchy].[Day Of Month] ELSE NULL END +
CASE 1 WHEN 1 Then [Time].[Hierarchy].[Week Of Year Name] ELSE NULL END +
CASE 1 WHEN 1 Then [Time].[Hierarchy].[Month] ELSE NULL END +
CASE 1 WHEN 1 Then [Time].[Hierarchy].[Quarter Of Year Name] ELSE NULL END +
CASE 1 WHEN 1 Then [Time].[Hierarchy].[YEAR] ELSE NULL END,
[Measures].[ValueAfterLogic],DESC)
}
DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS FROM
(SELECT ( {[KPI Values].[KPI Id].&[{97754C54-AB43-403D-A2C2-21C04BDE93E3}] } ) ON COLUMNS
FROM [Workplace])
WHERE ( [KPI Values].[KPI Id].&[{97754C54-AB43-403D-A2C2-21C04BDE93E3}])
Hi, I am having problems printing a new table we added to an existing report. When I preview the report in Visual Studio everything looks good. But when I click the print layout view button the "header" portion of the report shows on one page and the detail shows up on another. Has anyone seen this happen before?
i have created a report now i want to have the report print on one page instead of two pages which is doing now.how can i do that.i am using SSRS 2005. please help
I have a field on a Group Footer which is a Sum field based of an IIF statement.
Here it is.
=Sum(IIF(Fields!EXPR1.Value=2 and Fields!Type.Value=1,Fields!Quantity.Value,0))
If I do not use the AND, by by only checking on one field it works fine and it returns a result, however if I use the AND Operator I get the #Error when previewing the report.
Does anyone have any idea why this is happening. Any suggestion would help/
i have created a report now i want to have the report print on one page instead of two pages which is doing now.how can i do that.i am using SSRS 2005. please help
I have developed report(SSRS 2005) using Matrix control and Chart, on web in works good, but when user prints the report it cuts matrix and prints it on separate pages.
my requirement is to print every thing in a single page, no matter how much data i has. i tried landscape print (by changing width 11 and height to 8.5) but no result, does any one know the solution....?
I am running SSRS 2005, rendering reports locally using a report viewer. Rather than direct the viewer to an .rdlc file, I use an XMLDocument. A few of my reports have a large image in the background that needs to be invisible when the report prints. This was straightforward - I just use a report parameter and set the visible state of the image to the value of the parameter. The hard part is getting the report to print without an error.
Initially, I render the report with the following code:
End Sub This code works fine. I have hidden the print button on the report viewer, and to print, the user must press my button which runs the following code. Private Sub PrintReport()
Try _Param(0) = New Microsoft.Reporting.WinForms.ReportParameter("ImageVisible", "False") ShowReport()
ReportViewer1.PrintDialog()
Catch ex As Exception MsgBox(ex.ToString) End Try
End Sub Resetting the parameter and re-displaying the report works fine on its own. The PrintDialog method works fine on its own. When combined in the same Sub like this, I get the following error: "Operation is not valid due to the current state of the object". Does anyone know how I could get it to print without an error? I would be very grateful for any help.
I am rendering the report from remote server and I am displaying it. when I try to print the report from my application it is printin properly. but when I try to print it from IIS it is showing an error message that "No printers are Installed ". I did not specify any printer name in my application. How can I resolve this problem.
I have a report that only has one page when previewed but when it's printed there are two pages. This is a problem because I get two printed pages to my report with "1 of 2 pages" on the first page and "2 of 2 pages" on the second but there is only data on the first page and the second has header and footer but no data.
Is there a way to force the report to fit everything on one page? Or some other setting I am missing?
My Requirement is to dirctly Print the SSRS Report without using Reportviewer. If anybody know How to Print Report without using Reportviewer, please let me know asap.
Hello Every one, we have reports, for that we are using Visual studio and report viewer. In Report viewer ,I Enabled print Option. While i tried to Print on HTML report from report viewer; I set Properties Landscae but the output is coming like Potrait. In my Rdl Interactive size Properties are width11 in and height 8.5 in why it is coming like Potrait size. can any one help me?
I have e-mails saved in a SQL database with all HTML formatting information. To remove all HTML formatting I craeted a function on the RS report:
Public Shared Function removeHtmlChar(ss) try Dim l as integer Dim i as integer Dim ch as string Dim x as integer Dim t as string t = "" l=len(ss) for i=1 to l ch=mid(ss,i,1) x=i if(ch="<") then x=i do while(mid(ss,x,1)<>">") x=x+1 loop else t=t & ch end if i=x next t = t.Replace("nbsp;"," ") removeHtmlChar = t catch removeHtmlChar = "" end try End Function
When I look at the report on the screen the report is showed correct. If I print or export the report it add a lot of line breaks in the e-mail text. Why does it not print it as it looks at the screen?
We have a report that prints correctly (in landscape) in the folder that is deployed to but the linked report in a different folder prints in portrait?
Is it possible to setup different font size when a user is browsing or printing a report?
I have a lot of data to print on a report and i need tu use a font size of 7pt which is fine for printing but when the user is looking at the report on the browser a font size of 7pt is a bit too small and the bold doesn't work.
I have report with a table, that generates rows to more than 1 page. When the user prints the report, each page should show the table header. Presently or by default , the table header is shown(printed) only on the first page.
I need to create address labels from report builder. I can create the same from report designer using list box and text boxes. But not able to create the same from report builder as it is supporting only one layout - table (Columnar) for table type. Can any one help me to place the filelds in row wise rather than column wise.
SUBREPORT (License info to the right) SHOULD PRINT TO RIGHT OF ADDRESS INFORMATION ON LEFT. LIKE THIS...
Name ABC-12345 Address line 1 DEF-12345 Address line 2 GH1-12345 City, State Zipcode
The data is from one table and looks like this. Both the main report and subreport use a shared data souce.
Name Address line 1 City State Zipcode License ------------- ------------------- ------------- --------- ---------- --------- Joe Schmoe 123 Maple Street Clearwater Florida 33777 ABC-12345 Joe Schmoe 123 Maple Street Clearwater Florida 33777 DEF-12345 Joe Schmoe 123 Maple Street Clearwater Florida 33777 GHI-12345
All lines are header lines. Subreport has been placed in top header line. IT IS PRINTING SIMILAR TO THIS BUT SHOULD PRINT AS FIRST STATED ABOVE...
Name ABC-12345 DEF-12345 GH1-12345 Address line 1 Address line 2 City, State Zipcode
ISSUE: I would like the subreport to PRINT ALONG WITH the address information to its left. In Crystal Report a subreport could "Underlay Following Sections" - a wonderful feature Microsoft maybe should have copied. Is there a way to duplicate "underlay" behavior in SQL Reporting ? Thanks.
UPDATE: Coworker found workaround. Can concatenate Name, Adress line 1, Address line 2, City, State and Zipcode into one field. Would still like to know a more straightforward way.
Hello, I am trying to get a SSRS 2005 report to print from my Visual Studio 2005 C++ application without using the ReportViewer to preview it first. What I have done is created a dll that I call into when I want to access a certain report and print it. While searching around on the internet I found an MSDN article about printing a report without previewing and it had an example in C# code. So I used that as a guide for my C++ code but I am still having problems with rendering the report properly so it can be printed. When I try to render a report using the "Image" format, my streamid string is empty but the byte array that the render routine returns is not. Here is the code I am using, what could be the problem here?
Note: m_Streams is define elsewhere as array<String^>^ m_Streams = gcnew array<String^>(10);
Hello all, When I print the reports ( or export to PDF) in Report Manager, my every alternate page is blank? If the report is just one page report, I get second page as blank when I print or export. The report prints in Landscape format( which should be fine given 8.5 inch height and 11 inch width). I have played with the interactive Height and other height parameters but with no luck. My current settings in the rdl file is: <BottomMargin>0.5in</BottomMargin> <RightMargin>0.5in</RightMargin> <PageWidth>11in</PageWidth> ... <Width>11in</Width> <InteractiveHeight>1.5in</InteractiveHeight> <Language>en-US</Language> <TopMargin>0.5in</TopMargin> <PageHeight>8.5in</PageHeight>
I would highly appreciate any suggestions. Thanks Phewa Taal
I want each item of the list in a new page. So I checked the "Insert page break after this table" of the table properties to make sure that the next table is rendered on the next page.
But printing or exporting the report, a blank page with just the header and the footer is printing.
Is there a way to remove this last extra blank page?
I have a background image I'm using as a form within my report. the problem is that I needed to reduce the resolution of the image to 96 dpi in order to work with it and line things up within the ssrs/vs2005 report editor. However because the image is only 96 dpi, it looks awful when I go to print. Is there a way I can make it use a different higher resolution version of this image for printing.. or what would someone suggest I do in order to get around this problem..