Problem Connecting To SQL Express (error In Initializing Provider)
Jan 18, 2007
I have seen several posts on the subject, and have tried various configs. At this point, I am simply trying to connect to SQL Express, that's all.
I have an app. in MS Access that uses SQL Express as a back-end database (this is the simple desktop version of our software). I don't remember having so many issues with just connecting to a small db engine on a single computer..! Just to get it off my chest, there was a post about this subject where someone listed more than 15 items to check... If anyone at Microsoft is reading... connections should not require a 15-item check-list.. People running sql express are not creating a sophisticated database system, probably running it because, they want a free, easy solution, and do not have an IT person, nor are they intersted in reading any 1 of the 15 items... Just trying to connect to the instance of the database that runs on the same computer.... that should not require more than possibly 3 different settings.
My objective at this point, is simply to connect! Nothing else.
My environment settings are:
OS: Win XP Professional
MS Access(2003) and SQL Express both installed on the same computer
All connection attempts are on the same computer
SQL Express is installed in mixed mode
SQL Browser running, Network DDE running (if needed)
All Network protocols are enabled (tried disabling and enabling each 1 at a time as well)
All Client protocols are enabled
I tried setting network library to "dbmssocn", and left blank for default (uses namedpipes)
I tried using host name, localhost, and IP address for servername (with the SQLEXPRESS of course)
Also tried leaving it blank
I tried with Integrated security, also tried with the user "sa" and "test" user (both enabled and capable of logging in and accessing the database)
I tested the connection from SQL Express Manager, successfully connected in all modes (secure, and with SQL users) to make sure there are no issues with the users or security.
Tried turning the SQL browser off (this should not be needed in local mode)
Tried using an alias
Tried using attach database as a filename
And, the firewall is turned off.
Always getting the error "....connection failed because of an error in initializing provider" (whether using namedpipes, or TCP, or shared mem)
Both SQL Express and Access are installed on the computer, that should include the providers...
Please let me know if there is anything left for checking and/or trying... Appreciate your help...
Hi,I have SQL Server Express Edition. I tried working out some ASP.NET Labs in my local system. Here is the link of the Virtual Lab which I tried. http://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?EventID=1032286906&EventCategory=3&culture=en-US&CountryCode=USI recieve this error in my local system. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)I tried working out solutions from various websites. But the no solution is effective. Could anyone help me in solving this issue.
I am using windows 2003 server and i have installed SSAS 2005 and configured http request for AS 2005 with this below url : http://www.microsoft.com/technet/prodtechnol/sql/2005/httpasws.mspx. I had tried all the possiblities given in this url. But i am getting like "Test connection failed because of error initializing provider. The HTTP Server returned the following error : Not found" when i create udl file. Moreover i have installed MSOLAP 3.0 and OLAP 9.0 provider and MSXML 6.0 Parser.
I am creating my first SSIS package, simple, I read a file, a computation and then write it to an excel.
I am getting the message: "Test connection failed because of an error in initializing provider." The database is NOT remote. My computer is slow though. after about 10 or 15 seconds after clicking the button to test my connection, I get the message and much more. The message asks me if the instance name is correct. I don't know what this would be. This message is on the first task, reading the file (finding the file).
The last sentence of the long message is: "Named pipes provider: Could not open a connection to SQL Server (2).
My question is: Why am I getting this message and what do I need to do to resolve this problem?
Have 6 SQL Server 2012  failover clusters  environments on Windows 2012 R2 standard edition.Have intermittent connectivity issues when using Windows Authentication, with the error "test connection failed because of an error in initializing provider. login timeout expired" . Am checking by using a UDL file and have tried the below.
1) Have made port changes to use static 1433 port. 2) Have enabled shared memory and using Named Pipes and TCP/IP by using cliconfig. 3) Have turned off firewall. 4) Loopback is disabled 5) SQL Browser is running, have changed 'Built in Account setting'  from 'Local Service' to 'Network Service'. but with no effect.
Still I am getting intermittent connectivity issues.
Facts:1. I am using my account on Godaddy trying to connect to my sql server db.2. I can get into my db using user id and password.3. Godaddy's help file shows this for a connection string: connectstr = "Driver={SQL Server};SERVER=" & db_server & ";DATABASE=" &db_name & ";UID=" & db_username & ";PWD=" & db_userpassword4. My connection string: "Server=whsql-v09.prod.mesa1.secureserver.net;uid=dbasolutions;pwd=***;database=DB_87972;" & _ "Trusted_Connection=False providerName=System.Data.SqlClient"{password **** out}5. Get error message An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) I tried to email Godaddy's help desk with this information. There first response: We do not allow remote connections to our sql server database.There second response was to read the help file!Does anybody have any suggestions? Thanks in advance,bswanson
I've run into a bit of a database connection problem. I'm trying to connect to a SQL Server database. It compiles okay, but then while IE is loading, I get an exception error pointing out in the code saying 'Keyword not supported: 'provider'.
Basically the error that I am getting is in our test automation when running as non-admin on the box (regular user). We use .Net C# SQLConnection class to connect to SQL express 2005 impersonating with admin credentials. After getting the connection we try to execute a select command and it some time fails with following error: A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The handle is invalid.) at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error) at System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParserStateObject.ReadPacket(Int32 bytesExpected) at System.Data.SqlClient.TdsParserStateObject.ReadBuffer() at System.Data.SqlClient.TdsParserStateObject.ReadByte() at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlDataReader.ConsumeMetaData() at System.Data.SqlClient.SqlDataReader.get_MetaData() at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader()
This happen only in the non-admin scenario mentioned above. Any idea what is triggering this?
I am very frustrated. Everything works on the local host but when I upload to server I can login to the admin role I created, but when I try to access pages that have role priveleges I get the following error: The SSE Provider did not find the database file specified in the connection string. At the configured trust level (below High trust level), the SSE provider can not automatically create the database file. The ASPNETDB.MDF database was uploaded using the Database Publishing Wizard. Please help!
I'm working on an OLE DB provider. This provider is supposed to retrieve data from managed application running in background. The data retrieval is handled by C# component communicating with source application via remoting, the data are then exposed via component's COM interface. OLE DB provider itself instantiates the communication component.
Now, the problem: this worked ok in SQL server 2000, but it doesn't seem to work in SQL server express edition. Concretely, the communication component fails to get created (CoCreateInstance ends with 'class not registered') and SQL server logs this:
2007-08-24 14:48:49.42 spid51 Error: 6511, Severity: 16, State: 20. 2007-08-24 14:48:49.42 spid51 Failed to initialize the Common Language Runtime (CLR) v2.0.50727 with HRESULT 0x80131022. You may fix the problem and try again later.
I've googled a bit and found out someone else getting this message, and he was told something like 'trying to load CLR in some cases is disabled in newer (>2000) versions of SQL server'.
Now, I have very little knowledge of SQL server, CLR integration etc., so I'm not sure whether this applies to my case as well, but I think so - that problematic COM object is C#-based.
I'd be glad for any hints, ideas how to solve this issue, I just need the OLE DB provider to be able to access that managed application.
Hi - can anyone please help? I am using SQL Express 2005 - and have an asp (yes legacy asp) site running locally. It works ok, until I try and connect to the server from another PC. The error message I get is: ****** Microsoft OLE DB Provider for SQL Server error '80004005' Cannot open database "fixit" requested by the login. The login failed. /fixitnew/fixit_login.asp, line 30 ****** Line 30, is where I open the connection to the database. My connection string is: myConn = "Provider=SQLOLEDB.1;Integrated Security=SSPI;Persist Security Info=False;Initial Catalog=fixit;Data Source=misinvaknb01sqlexpress;" Can anyone please help? Thanks in advance, Mark
Hello, I'm a newbie who is trying to create a connection to the server in my website application and I keep getting the following error: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server). I enabled TCP/IP and Pipe in the configuration and restarted the engine and server but I still get this error and it's stressing me out. Below is the code for the app. Any help would be greatly appreciated. Thanks
Imports System.Data Imports System.Data.SqlClient Partial Class _Default Inherits System.Web.UI.Page Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load ' Create the database Connection Dim conn As New System.Data.SqlClient.SqlConnection( _ "Server=Main;" + _ "Integrated Security=True;" + _ "Database=ShoppingCartData;" + _ "AttachDBFilename=" + _ "C:DOCUMENTS AND SETTINGSTONYAMY DOCUMENTSVISUAL STUDIO 2005WEBSITESADOAPP_DATAADO.MDF")
' Create the Data Adapter with the required SELECT statement Dim Adapt As New System.Data.SqlClient.SqlDataAdapter("SELECT * FROM Products", conn) ' Create the dataset with the required information Dim dsADO As New System.Data.DataSet() Adapt.Fill(dsADO) Dim DR As DataRow() ' Define the Table Dim ProdTbl As New Table() ' Create content for the Web Page For Each DR In dsADO.Tables(0).Rows 'Create a new table row. Dim ProdRow As New TableRow() 'Create a cell within the row. Dim ProdCell As New TableCell() 'Define content for the Cell Dim ThisLink As New HyperLink() ThisLink.NavigateUrl = "Products.aspx?ProdID=" + _ DR("ProductID").ToString() ThisLink.Text = DR("ProductNme").ToString() ThisLink.ID = DR("ProductID").ToString() 'Add the content to the cell and the cell to the row. Place the row in the table ProdCell.Controls.Add(ThisLink) ProdRow.Controls.Add(ProdCell) ProdTbl.Controls.Add(ProdRow) Next 'Add the table to the Place holder. phProducts.Controls.Add(ProdTbl) End Sub End Class
How do I get rid of this error message when tring to log into my web site user account stored on the default ASP.NET 2.o generated database on my local computer?
Server Error in '/FundACure.org' Application.
Cannot open user default database. Login failed. Login failed for user 'LANBOYASPNET'.
Where "LANBOY" is the name of my computer. I am logged in as myself "LANBOYKEVIN" My web page is trying to log into the server using the name "ASPNET" which I assume is a standard ASPNET user name.
I thought it was failing because I needed to grant access to this user in the server, so I added the account for the server. Same problem.
So I thought I needed to create this user in my Windows XP user list. When I tried it said "this user already exists" even though it isn't displayed in the list. That is when I realized that it is a standard user established by ASP.NET. It is probably supplied in the C# code through a base class.
So, how do I get this DB to connect? Is the user missing, or is it that my connection string is wrong?
Just manged to install sql server 2005 express after two days. I have a problem now! When i try to connect to it via my browser (local database), i get the following error: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) I have opened the surface area configuration manager and set the connections to remote and local but it still doesnt work
I have had SQL express installed and working ok, however, I can no longer connect
OS: XP sp2.0
.net installed ver1.1 .. 2.0 sp1, 3.0sp1 and 3.5
The install of SQL was using the SQLEXR_adv download
I have removed SQL and all associated applications folders and windows SQL services
I have re-installed many times but always receive the same issue.
I re-built the .net 2.0
The issue I have is when I try and connect form my applications or with Express sql management studio I receive the following error:
It looks like a .net2.0 issue
TITLE: Connect to Server ------------------------------ Cannot connect to RNASHLTOPSQLEXPRESS. ------------------------------ ADDITIONAL INFORMATION: The type initializer for 'System.Data.SqlClient.SqlConnection' threw an exception. (System.Data) ------------------------------ The type initializer for 'System.Data.SqlClient.SqlConnectionFactory' threw an exception. (System.Data) ------------------------------ The type initializer for 'System.Data.SqlClient.SqlPerformanceCounters' threw an exception. (System.Data) ------------------------------ Configuration system failed to initialize (System.Configuration) ------------------------------ Unrecognized configuration section system.serviceModel. (C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Configmachine.config line 136) (System.Configuration) ------------------------------ BUTTONS: OK ------------------------------
I've been trying to configure remote connections to my sql server express to no avail.
First here are some constants to clear some things up: - OS: Windows XP Pro - SQL Express version: April CTP release - Windows Firewall: disabled (to avoid any problems there) - Network type: two computers connected a router. - Router firewall: Enabled (I may be wrong but the router firewall only blocks external traffic, so I left it on.)
First, I configured my SQL server to allow remote connections in the SQL Surface Area Configuration. (Set it to both TCP/IP and named pipes)
Second, I enabled and configured sql server browser.
Third, I enabled TCP/IP and named pipes in the 'Protocols for SQL Express' option of the SQL Server Configuration Manager.
According to http://blogs.msdn.com/sqlexpress/archive/2005/05/05/415084.aspx I have done everything I need to (including edit the registry to enable the SQL Server Browser service) and the error I continue to get is:
"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)"
So I tinkered and had no success in messing with anything that would fix it. Although, ***when I browsed for network servers on different machine, the server instance DID show up in the list***. So I find it odd that it can find the instance when browsing, but fails to 'find' it when making a connection.
So I didn't stop there, I decided to try the non-sql server browser method of remotely connecting: specifying the IP.
I went back to the blog of instructions referenced above and re-did the steps, this time specifying a TCP Port for the server instance and then after specifying the port on the remote computer connection string, and attempting to connect, I get this error:
"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.) (Microsoft SQL Server, Error: 10060)"
I've done all I know how, read all the possible blogs I can, and nothing's come up. If anyone can shed some light on me, I'd pay you 1 billion pretend dollars. Any help would be appreciated. Thank you!
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)
I'm trying to force an anonymous subscription to re-intialize on it's next sync attempt. I can do this from the subscriber no problems, and from the publisher using 'Re-initalize All Subscriptions', but I can't seem to re-intialize only a single subscription from the publisher.
To do this I'm trying to execute sp_reinitmergesubscription using the subscriber details found in the sysmergesubscriptions table. This executes ok and when the subscriber starts to sync it does try to re-initialize starting with generating a new snapshot, but after processing for a while it throws the following error messages:
Error messages: The merge process could not allocate memory for an operation; your system may be running low on virtual memory. Restart the Merge Agent. (Source: MSSQL_REPL, Error number: MSSQL_REPL-2147198720) Get help: http://help/MSSQL_REPL-2147198720 An error occurred while reading the .bcp data file for the 'CDP_TableDates' article. If the .bcp file is corrupt, you must regenerate the snapshot before initializing the Subscriber. (Source: MSSQL_REPL, Error number: MSSQL_REPL-2147199428) Get help: http://help/MSSQL_REPL-2147199428 The merge process was unable to deliver the snapshot to the Subscriber. If using Web synchronization, the merge process may have been unable to create or write to the message file. When troubleshooting, restart the synchronization with verbose history logging and specify an output file to which to write. (Source: MSSQL_REPL, Error number: MSSQL_REPL-2147201001)
There doesn't appear to be any shortage of memory on the server. There is no problem regenerating the snapshot from the publisher, and there's no problem with syncing through the web using delta syncs or re-initializing from the subscriber, so I can't see any obvious cause from those error messages.
I'm using SQL Server 2005 SP2 on the publisher, and SQL ServerCE 3.1 on the subscriber.
i'm going nuts with SQL server notification thing. I have gone throigh this artical which tells how to set user http://www.codeproject.com/KB/database/SqlDependencyPermissions.aspx. This article show how to create new user and setup for sql server notification.But In my case user was alredy existing in database. which is very common senario in most cases. So i did following( check the SQL script below) but then i get this error "A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)" this my sql script use [master]Go -- Ensuring that Service Broker is enabled ALTER DATABASE [DatabaseName] SET ENABLE_BROKERGO -- Switching to our databaseuse [DatabaseName]GO CREATE SCHEMA schemaname AUTHORIZATION usernameGO ALTER USER username WITH DEFAULT_SCHEMA = schemaname GO /* * Creating two new roles. We're not going to set the necessary permissions * on the user-accounts, but we're going to set them on these two new roles. * At the end of this script, we're simply going to make our two users * members of these roles. */EXEC sp_addrole 'sql_dependency_subscriber' EXEC sp_addrole 'sql_dependency_starter' -- Permissions needed for [sql_dependency_starter]GRANT CREATE PROCEDURE to [sql_dependency_starter] GRANT CREATE QUEUE to [sql_dependency_starter]GRANT CREATE SERVICE to [sql_dependency_starter]GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_starter] GRANT VIEW DEFINITION TO [sql_dependency_starter] -- Permissions needed for [sql_dependency_subscriber] GRANT SELECT to [sql_dependency_subscriber] GRANT SUBSCRIBE QUERY NOTIFICATIONS TO [sql_dependency_subscriber] GRANT RECEIVE ON QueryNotificationErrorsQueue TO [sql_dependency_subscriber] GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_subscriber] -- Making sure that my users are member of the correct role.EXEC sp_addrolemember 'sql_dependency_starter', 'username'EXEC sp_addrolemember 'sql_dependency_subscriber', 'username'
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact under the default settings of SQL SERver does not allow remote connections. (provider:Named Pipes Provider, error: 40-Could not open a connection to SQL Server)
In ODBC Data Source Administrator, I add the SQL Server driver, complete a name and select my local SQL Server instance, select Windows NT authentication (the client configuration is set to TCP/IP, dynamically determine port) and on clicking Next, the following errors occur:
Connection failed: SQLState: '01000' SQL Server error: 2 [Microsoft][ODBC SQL Server Driver][Shared Memory][ConnectionOpen (Connect()). Connection failed: SQLState: '08001' SQL Server error: 17 [Microsoft][ODBC SQL Server Driver][Shared Memory]SQL Server does not exist or access denied.
I note that in the Help it says: "The SQL Server system administrator must have associated your Microsoft Windows login with a SQL Server login ID".
Is this the problem? If so, where do I make this association?
We experience the 40 error when our Asp.net code runs under IIS and uses named pipes to a sql server 2005 named instance.
We've tried all suggestions found on blogs and KB articles such as making sure the named pipes protocol is enabled, making sure the Browser service is started, making sure Allow Remote Connections is enabled, making sure we're not using Asp.Net 2.0 membership providers, and the list goes on and on.
We boiled it down to a simple test scenario. We open a SqlConnection to the sql 2005 box in the code with the intention of binding a datareader to a gridview, but it never gets that far because the connection.Open() fails.
If we run this test application as a virtual directory in IIS and Asp.Net 2.0, the connection.Open() fails.
If we run this test application from Visual Studio .Net using Cassini (PWS), the connection.Open() succeeds and binds to the gridview.
What could be causing the connection to fail under IIS but succeed under Cassini? We've tried setting IIS to run as a domain user and with digest authentication enabled. That made no difference.
I get the following error and have been trying to figure out why I keep getting it. Initially, I had placed my project under wwwroot folder and ran it under IIS and it gave this error. Then I moved it to my local C drive and same thing. I am sharing this project with two other co-workers and all our config files and code files are same...they don't get this error but I do. I checked that SQL Server Client Network Utility has TCP/IP and the 'Named Pipes' enabled. I thought maybe I have setting in the Visual Studio 2005 that I'm not aware of that's causing this problem...it can't be the server since my co-workers aren't having this error and can't be anything in the code since all of us are sharing this project through vss. I dont' think using different version of .net framework can create this error. I changed the version from 2.0 to use 1.1x and it gave same error... Any help would be greatly appreciated. Thanks in advance.
Server Error in '/RBOdev' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +739123 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188 System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +685966 System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +109 System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +383 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84 System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197 System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.GetConnectionHolder() +16 System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.LoadPersonalizationBlobs(WebPartManager webPartManager, String path, String userName, Byte[]& sharedDataBlob, Byte[]& userDataBlob) +195 System.Web.UI.WebControls.WebParts.PersonalizationProvider.LoadPersonalizationState(WebPartManager webPartManager, Boolean ignoreCurrentUser) +95 System.Web.UI.WebControls.WebParts.WebPartPersonalization.Load() +105 System.Web.UI.WebControls.WebParts.WebPartManager.OnInit(EventArgs e) +497 System.Web.UI.Control.InitRecursive(Control namingContainer) +321 System.Web.UI.Control.InitRecursive(Control namingContainer) +198 System.Web.UI.Control.InitRecursive(Control namingContainer) +198 System.Web.UI.Control.InitRecursive(Control namingContainer) +198 System.Web.UI.Control.InitRecursive(Control namingContainer) +198 System.Web.UI.Control.InitRecursive(Control namingContainer) +198 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +692
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,
Hi,I have SQL Server Express Edition. I tried working out some ASP.NET Labs in my local system. Here is the link of the Virtual Lab which I tried. http://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?EventID=1032286906&EventCategory=3&culture=en-US&CountryCode=USI recieve this error in my local system. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)I tried working out solutions from various websites. But the no solution is effective. Could anyone help me in solving this issue.
hello eveyone..i have just downloaded and installed the visaul web developer 2005 express edition and sqlserver 2005 express edition.On top of that i even downloaded and installed the northwind database.But my problem is when i am connecting to the northwind database by clicking toos menu>connect to the database>choose datasource>new connection>..i have provided it with the required information..but as soon as i press "Test Connection" button the following error box displays.. "an error has occured while establishing a connection to the server.when connecting to the sql server2005,this failure may be caused by the fact that under default settings sql server doestnot allow remote connections.(provider:Named piped providers,error:40-couldnot open a connection to sqlserver.)" i have no idea whats is all about..can anyone get me pass this error..
We have 4 client machine and 1 server machine, that server have all the sql server 2005 database€™s.
A project developed from client1 with Asp.net 2005 now I need to access that project from client2 so I type http://My Ip address/Folder Name/home.aspx in my browser here when the sql connection is open(SqlConnection.Opn()) then I meet this problem
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. I am getting this error and using this connection string Data Source=192.168.0.100;Network Library=DBMSSOCN;Initial Catalog=ENet;User ID=eonline;Password=eonline; What can be solution for this.
Hi, I am working on VS 2005 and using SQL 2005 Express and i am processing excel files and inserting records in data base as i processing starts and almost after processing 600 i got this error provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server. how can i solve that thanx
Hi, My .NET 2005 application is on a server outsite company's domain. SQL server is in domain and port for sql server is open. TCP/IP is set for remote connection in SQL Server. Connection string in .config is <add name="X_Conn" connectionString="Data Source=XXX;Initial Catalog=XXX;User ID=XX; Password=XXX;" providerName="System.Data.SqlClient"/> I receive the error below: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) thanks a lot in advance!
We just changed the dev environment to sqlagent. From then we were unable to see the reports on the report server because:
An error has occurred during report processing.
Cannot create a connection to data source 'IHRSDataSource'.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
this error is cropping up.
To Resolve this issue, we checked the Surface Area Configuration and also checked the Reporting Service Configuration . There seem to be no problem and everything looks ok.
