Problem With NULLS In Data Flow Vs Identity Column
Dec 12, 2007
I'll preface this by saying I'm pretty new to SSIS; I'm coming over from Coldfusion and don't have much DTS experience to draw from either. That said....
I've got a package that I run to migrate data from a bunch of older databases into a "flat" new schema. The new schema is not identical to the old, in other words, so it's not a simple mapping of existing columns. All the data flow tasks have finally gotten to a working state, with much trial-and-error. Now, suddenly one of the tasks is throwing this error:
"...Cannot insert the value NULL into column 'the_id', table 'the_table'; column does not allow nulls. INSERT fails."
The column is an identity column in the new table; it is NOT NULL as it is the primary key. I've triple-checked that identity is on. Basically it's generated anew each time this package is run. In the data flow task, mappings are set to ignore for this column; also, Keep identity and Keep nulls are on (although since this column is not in the source I can't see how this affects anything.)
(***For anyone wondering why in the heck I'd need this column at all, offhand I can't recall if later tasks use it or not...I'm actually wondering if it's even needed in this read-only table if it's not used as a foreign key somewhere else...however, I'd like to figure out this issue regardless... )
I've had a hard time finding anyone with the same problem out there...usually people with NULL issues simply are trying to insert into a NOT NULL column. The big difference here is that the column is identity.
Thanks,
Rick
View 3 Replies
ADVERTISEMENT
Jun 19, 2008
Hi,
I am having problem in bulk update of a sql server table haning identity column from a datatable( has no identity column) using sqlbulkcopy. I tried several approaches, but it does not show any error nor is the table getting updated. But the identity value seems to getting increased every time.
thanks.
varun
View 6 Replies
View Related
Jul 17, 2015
Table 1:
------- Â Â -----Â Â Â Â Â Â Â Â Â ----Â Â Â Â Â Â Â Â Â ----
Name    Add          No        RowID
-------Â Â Â Â -----Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â ----Â Â Â Â Â Â Â Â -------
aa    #a-1,India                             10
bb    #a-1,India                     11               Â
aa    #a-1,India                             12
----------------------------------------------------
 table 1 inserting to Table 2 (Using 1st Data flow)
Table 2:
------- Â Â -----Â Â Â Â Â Â Â Â Â ----
Name    Add         ID(Note:Here Identity1,1)
-------Â Â Â Â -----Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â ----
aa    #a-1,India                1
bb    #a-1,India                2
aa    #a-1,India                3
----------------------------------------------------
My Requirement is Update Table 1 set Column::No=Table 2.ID
                                                                      Â
based on Exact Match of
                                                                       Â
Table1.Name=Table2.Name and
                                                                       Â
Table1.Add=Table2.Add
It means Get back the Id for Source Table 1
 2nd Data flow
       Source(Table1:Name, Add,No)
                   |
  --LOOKUP(Table2:Name, Add::Matched Look Columns Name, Add and
Tick Mark on ID)
                        |(Match)
  -->OLEDB Command: update Table1 set N0=? where RowID=?(Here Param_0= NO ,Param_1=RowID)
Here My Issue is if Table 1 had Duplicates(same Name, Add, but Row Id is different it is Updating Same ID for Table 1.No It means Get Back ID correctly not updating Result::
Table 1:
------- Â Â -----Â Â Â Â Â Â Â Â Â ----Â Â Â Â Â Â Â Â Â ----
Name    Add          No        RowID
-------Â Â Â Â -----Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â ----Â Â Â Â Â Â Â Â -------
aa    #a-1,India               1             10
bb    #a-1,India              2       11               Â
aa    #a-1,India              1 12
----------------------------------------------------
My correct Output is   3    instead of Result:Table1 1.NO  1  where RowID =12
It caused by LOOKUP , It picking Top1 ID while Matching Look on fields.
How Should I update the (Identity) Get Back Table 2.ID to Source Table1. NOÂ in Above logic in SSIS?
View 11 Replies
View Related
Sep 26, 2013
I'm inserting data from a c# webservice into a table via a stored procedure, but I get a Column does not allow nulls on the @alert_id column/field. It is set as int and allow nulls is not ticked.
Here's the sql:
USE [aren]
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [aren1002].[ArenAlertInsert]
[Code] ....
View 7 Replies
View Related
May 16, 2006
When i do a select on my emplee table for rows with null idCompany i dont get any records
I then try to modify the table to not allow a null idCompany and i get this error message:
'Employee (aMgmt)' table
- Unable to modify table.
Cannot insert the value NULL into column 'idCompany', table 'D2.aMgmt.Tmp_Employee'; column does not allow nulls. INSERT fails.
The statement has been terminated.
This sux
View 4 Replies
View Related
Jan 5, 2006
I need to know what a table's max row Identity is part way thru a data flow. I can't get it at the beginning of the data flow. I need to either (1) add it to the data buffer part way thru or (2) set it into a package variable and then reference the var in a script component.
I've not found a way to add a database column to the data buffer without doing a lookup for each row (too slow and not appropriate here) or some goofy oledb source and then merge join into the data buffer on a contrived join.
I've read questions about referencing package vars in scripts but I can't get that to work. DTS.Variables("varname").Value isn't recognised when I code it up.
Anyone have an idea or solution for either one of these? If you're gonna explain the script code, please include the entire snipet including the INCLUDEs, etc.
View 8 Replies
View Related
Sep 27, 2007
Hi,
Is there a way to accomplish one- many or many -one or many - many column mappings in the SSIS data flow task or using any other tasks. We were able to do this in DTS Transform data task. Also is it possible to edit the mapping like:
dest column1 = Right(dest column1, 3)
Thanks.
View 4 Replies
View Related
Nov 8, 2007
Hi,
I have one data flow control. Source is SQL server and destination is flat file destination. I have one derived column placed in between these two. This functionality works fine. I would like to sum one column data and count total no. of columns and put it in global variable. How can I achieve it?
Thanks,
View 7 Replies
View Related
Sep 4, 2007
Has anyone done this? I can't find anything in the documentation
that describes this. The closest I get is to the InnerObject property
of the TaskHost class. There is an example of programming a bulk
insert task. But I can't find anything on programmatically setting
the column mappings (source to dest) of a simple data flow task. Any
help is appreciated!
View 7 Replies
View Related
Feb 7, 2007
Hi,
I'm having my first go at developing a destination adapter which will send data to an update Web Service.
I've got some rather big gaps in my understanding. I've been following the various samples I've found on the net and have validated my mapping and picked up all the available column names and datatypes which are appearing in the Input and Output Properties tab of the Advanced Editor but I only have a tab for "Input Columns" and not "Column Mappings".
Which method defines the availble columns for the user to map?
Let me know if I haven't given enough information.
cheers
View 1 Replies
View Related
Aug 29, 2007
Hello,
Is it possible to use existing data flow components (Merge Join, aggregation,...) in a custom data flow component?
Thanks,
Yoann
View 15 Replies
View Related
Dec 19, 2006
Hi:
In the derived column transformation editor, I have a Derived column name called FileGroupID. I would like to pass in a value for this column from a variable that I have set earlier in the scope. Can someone let me know, how to write the expression that does that and where do I specifiy that expression. I am thinking its the expression field in the derived column transformation editor. My main question is how to actually write the expression, what is the syntax to pull the variable value? Thanks.
MA2005
View 1 Replies
View Related
Nov 13, 2000
Whenever I import (or even append from another table) data to a table that has an Identity column, I get an error: Cannot insert NULL values in Identity column.
Isn't the Idenity column supposed to incement automatically without me having to provide a value? Using INSERT provides an Identity value automatically, using import however doesn't.
How can I overcome this problem? (I now delete and recreate the Identity column - really BAD practice!)
Thank you.
View 4 Replies
View Related
Apr 21, 2008
Hi,
I am using SQL Server 2005 Mobile Edition & Merge Replication
in this I want to insert a record into table,
in that table I have taken UserID coloumn as auto incrementing Identity type.
In a book I read that,
If you are using an Identity column, you must find the next available number and reseed before an insert can be successful. You will also have to set up ranged identity columns on the published database to prevent errors when the new data is merged.
Now I want to ask here that, how should I ressed that value before inserting?????
any help in a form of CODe will be appriciated.....
thanks in advance...
View 8 Replies
View Related
Feb 6, 2008
Hi,
I need to insert data into a table using data flow task. Unfortunately this table's priamry key column (integer column) is not identity column. I am looking a way to get the primary key value for the new records. Please advice. Thanks
View 5 Replies
View Related
Mar 8, 2008
I have a data flow that consists of
OLE DB source which calls a stored proc that returns a result set
data conversion
Excel destination
I am in design mode in Business Intelligence studio. My excel destination (with an Excel Connection) shows no sheet name though I have an execute SQL task before the data flow to create the excel table called SHEET1. Needless to say, there are no output columns visible to do any mappings. I did go to the ExcelConnection to set the OpenRowset Property to SHEET1 but it seems to have no effect.
I can do the export in SQL Server Management studio and that works fine, but it is basic and does not meet my requirements. I have to customize the package to allow dynamic Excel filenames based on account names and have to split my result set into multiple excel sheets because excel 2003 has a max of 65536 rows per sheet. Also when I use the export wizard, I have the source as a table and eventually the source has to be a stored proc with input parms.
What am I missing or doing wrong? Thanks in advance
View 6 Replies
View Related
Oct 7, 2015
I have table contains more columns  and first column have ID  int not null primary key  and auto increment by 1 seed by 1 the ID 165000 record  and instant Jump to 166000 and increment by 1 ...
View 5 Replies
View Related
Feb 14, 2006
Hi, All,
I need to pass a parameter from control flow to data flow. The data flow will use this parameter to get data from a Oracle source.
I have an Execute SQL task in control flow to assign value to the Parameter, next step is a data flow which will need take a parameter in the SQL statement to query the Oracle source,
The SQL Looks like this:
select * from ccst_acctsys_account
where to_char(LAST_MODIFIED_DATE, 'YYYYMMDD') >?
THe problem is the OLE DB source Edit doesn€™t have anything for mapping parameter.
Thanks in Advance
View 2 Replies
View Related
Aug 12, 2009
when i alter non identity column to identity column using this Query alter table testid alter column test int identity(1,1) then i got this error message Msg 156, Level 15, State 1, Line 3 Incorrect syntax near the keyword 'identity'.
View 2 Replies
View Related
Mar 9, 2007
I have an Execute SQL Task that returns a Full Rowset from a SQL Server table and assigns it to a variable objRecs. I connect that to a foreach container with an ADO enumerator using objRecs variable and Rows in first table mode. I defined variables and mapped them to the columns.
I tested this by placing a Script task inside the foreach container and displaying the variables in a messagebox.
Now, for each row, I want to write a record to an MS Access table and then update a column back in the original SQL Server table where I retreived data in the Execute SQL task (i have the primary key). If I drop a Data Flow Task inside my foreach container, how do I pass the variables as input to an OLE DB Destination on the Data Flow?
Also, how would I update the original source table where source.id = objRects.id?
Thank you for your assistance. I have spent the day trying to figure this out (and thought it would be simple), but I am just not getting SSIS. Sorry if this has been covered.
Thanks,
Steve
View 17 Replies
View Related
Jan 17, 2008
Dear All!
My package has a Data Flow Task. In Data Flow Task, I use a Script Component and a OLE BD Destination to transform data from txt file to database.
Within Data Flow Task, I want to call File System Task to move file to a folder or any Task of "Control Flow" Tab. So, Does SSIS support this task? Please show me if any
Thanks
View 3 Replies
View Related
May 17, 2007
Hi everyone,
Primary platform is 64 bit cluster.
How to move information allocated in SSIS variables from Data Flow to Control Flow layers??
We've got a SSIS package which load a value into a variable inside a Data Flow. Going back to Control Flow how could we retrive that value again????
Thanks in advance and regards,
View 4 Replies
View Related
Jan 12, 2006
I'm currently setting variables at the package level with an ExecuteSQL task. This works fine. However, I'm now starting to think about restartability midway through a package. It would be nice to have the variable(s) needed in a data flow set within the data flow so that I only have to restart that task.
Is there a way to do that using an SQL statement as the source of the value in a data flow?
OR, when using checkpoints will it save variable settings so that they are available when the package is restarted? This would make my issue a moot point.
View 2 Replies
View Related
Feb 17, 2006
Hi,
I have a indexing problem. I have a sequence that needs to has a index number. I want to use a table data type and have a working sample BUT I cannot reseed the table when needed. How do I do this.
This works only for the first ExitCoilID then I need to RESEED.
Here is my code:
DECLARE
@EntryCoilCnt AS INT,
@ExitCoilID AS INT,
@SubtractedFromEntyCoilCnt AS INT
DECLARE
@ExitCoilID_NotProcessed TABLE
(ExitCoilID int)
INSERT INTO @ExitCoilID_NotProcessed
SELECT DISTINCT ExitCoilID
FROM
dbo.TrendEXIT
where
ExitCoilID is not null and
ExitCnt is null
order by
ExitCoilID
DECLARE
@ExitCoilID_Cnt_Index TABLE
(ExitCoilID int, ExitCnt int IDENTITY (1,1))
IF @@ROWCOUNT > 0
BEGIN
DECLARE ExitCoilID_cursor CURSOR FOR
SELECT ExitCoilID FROM @ExitCoilID_NotProcessed
ORDER BY ExitCoilID
OPEN ExitCoilID_cursor
FETCH NEXT FROM ExitCoilID_cursor
INTO @ExitCoilID
WHILE @@FETCH_STATUS = 0
BEGIN
INSERT INTO @ExitCoilID_Cnt_Index
SELECT ExitCoilID
FROM dbo.TrendEXIT
WHERE
ExitCoilID = @ExitCoilID
ORDER BY
EntryCoilID, Cnt
select * from @ExitCoilID_Cnt_Index
--truncate @ExitCoilID_Cnt_Index
--DBCC CHECKIDENT ('@ExitCoilID_Cnt_Index', RESEED, 1)
FETCH NEXT FROM ExitCoilID_cursor
INTO @ExitCoilID
END
CLOSE ExitCoilID_cursor
DEALLOCATE ExitCoilID_cursor
select * from @ExitCoilID_Cnt_Index
END --IF @@ROWCOUNT <> 0
View 8 Replies
View Related
Jul 22, 2007
Hi all! I recently started working with SSIS and one of the things that is puzzling me the most is what's the best way to go:
A small control flow, with large data flow tasks
A control flow with more, but smaller, data flow tasksAny help will be greatly appreciated.
Thanks,
Ricardo
View 7 Replies
View Related
Nov 4, 2007
Hi,This should be straight forward, but I've searched high and low on the net.I have a FORM which allows me to INSERT data, SQL Server 2005 backend. I populate the all the mandatory fields. But when I click on the Insert button, it won't let me save and says:Column 'PERSONAL_ID' does not allow nullsI'm
using tableadapters, business logic layers etc. and pausing clearly
shows that the values from the form are being passed to the procedure
that I have created "AddNewRecord". And PERSONAL_ID is definitely not
NULL! It fails on Line 971: Me.Rows.Add(row)PERSONAL_ID
is a primary key which I generate. The pause also shows that for
PERSONAL_ID it says " {"Conversion from type 'DBNull' to type 'String'
is not valid."}Function AddNewRecord looks like this:<System.ComponentModel.DataObjectMethodAttribute(System.ComponentModel.DataObjectMethodType.Insert, True)> _
Public Function AddNewRecord(ByVal PERSONAL_ID As String, ByVal SURNAME
As String, ByVal CHRISTIAN_NAME As String, ByVal SEX As String, _
ByVal FAMILY_POSITION As String, ByVal FAMILY_ID As String, ByVal
ADDRESS_1 As String, ByVal ADDRESS_2 As String, _ ByVal ADDRESS_3
As String, ByVal ADDRESS_4 As String, ByVal ADDRESS_5 As String, ByVal
ADDRESS_6 As String, ByVal POSTCODE As String, ByVal COUNTRY As String,
ByVal ORG_ID As String) As Boolean ' create a new details row instance Dim details As New smDetails.smTbl_DetailsIDDataTable Dim detail As smDetails.smTbl_DetailsIDRow = details.NewsmTbl_DetailsIDRow details.AddsmTbl_DetailsIDRow(detail)...my formview code is this: <InsertItemTemplate> PERSONAL_ID: <asp:TextBox ID="PERSONAL_IDTextBox" runat="server" Text='<%# Bind("PERSONAL_ID") %>' AutoPostBack="True" /> <br /> SURNAME: <asp:TextBox ID="SURNAMETextBox" runat="server" Text='<%# Bind("SURNAME") %>' AutoPostBack="True" /> <br /> CHRISTIAN_NAME: <asp:TextBox ID="CHRISTIAN_NAMETextBox" runat="server" Text='<%# Bind("CHRISTIAN_NAME") %>' /> <br /> SEX: <asp:TextBox ID="SEXTextBox" runat="server" Text='<%# Bind("SEX") %>' /> <br /> FAMILY_POSITION: <asp:TextBox ID="FAMILY_POSITIONTextBox" runat="server" Text='<%# Bind("FAMILY_POSITION") %>' /> <br /> FAMILY_ID: <asp:TextBox ID="FAMILY_IDTextBox" runat="server" Text='<%# Bind("FAMILY_ID") %>' /> <br /> ADDRESS_1: <asp:TextBox ID="ADDRESS_1TextBox" runat="server" Text='<%# Bind("ADDRESS_1") %>' /> <br /> ADDRESS_2: <asp:TextBox ID="ADDRESS_2TextBox" runat="server" Text='<%# Bind("ADDRESS_2") %>' /> <br /> ADDRESS_3: <asp:TextBox ID="ADDRESS_3TextBox" runat="server" Text='<%# Bind("ADDRESS_3") %>' /> <br /> ADDRESS_4: <asp:TextBox ID="ADDRESS_4TextBox" runat="server" Text='<%# Bind("ADDRESS_4") %>' /> <br /> ADDRESS_5: <asp:TextBox ID="ADDRESS_5TextBox" runat="server" Text='<%# Bind("ADDRESS_5") %>' /> <br /> ADDRESS_6: <asp:TextBox ID="ADDRESS_6TextBox" runat="server" Text='<%# Bind("ADDRESS_6") %>' /> <br /> POSTCODE: <asp:TextBox ID="POSTCODETextBox" runat="server" Text='<%# Bind("POSTCODE") %>' /> <br /> COUNTRY: <asp:TextBox ID="COUNTRYTextBox" runat="server" Text='<%# Bind("COUNTRY") %>' /> <br /> ORG_ID: <asp:TextBox ID="ORG_IDTextBox" runat="server" Text='<%# Bind("ORG_ID") %>' /> <br /> <asp:LinkButton ID="InsertButton" runat="server" CausesValidation="True" CommandName="Insert" Text="Insert" /> <asp:LinkButton ID="InsertCancelButton" runat="server" CausesValidation="False" CommandName="Cancel" Text="Cancel" /> </InsertItemTemplate> Any pointers in the right direction would be appreciated. Thanks in advanceTushar
View 3 Replies
View Related
Dec 28, 2007
Hi,
I'm trying to implement an incremental data pull (Oracle to SQL) based on Andy's blog:
http://sqlblog.com/blogs/andy_leonard/archive/2007/07/09/ssis-design-pattern-incremental-loads.aspx
My development machine is decent: 1.86 GHz, Intel core 2 CPU, 3 GB of RAM.
However it seems the data flow task gets hung whenever I test the package against the ~6 million row source, as can be seen from these screenshots. I have no memory limitations on the lookup transformation. After the rows have been cached nothing happens. Memory for the dtsdebug process hovers around 1.8 GB and it uses 1-6 percent of CPU resources continuously. I am not using fast load to insert new records into my sql target table. (I am right clicking Sequence Container 3 and executing this container NOT the entire package in the screenshots)
http://i248.photobucket.com/albums/gg168/boston_sql92/1.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/2.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/3.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/4.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/5.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/6.jpg
The same package works fine against a similar test table with 150k rows.
http://i248.photobucket.com/albums/gg168/boston_sql92/7.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/8.jpg
The weird thing is it only takes 24 minutes for a full refresh of the entire source table from Oracle to the SQL target table.
Any hints,advice would be appreciated.
View 18 Replies
View Related
Jan 25, 2015
I have table of three column first column is an ID column. However at creation of the table i have not set this column to auto increment. Then i have copied 50 rows in another table to this table then set the ID column values to zero.
Now I have changed the ID column to auto increment seed=1 increment=1 but the problem is i couldn't figure out how to update this ID column with zero value set to each row with this auto increment values so the ID column would have values from 1-50. Is there a away to do this?
View 6 Replies
View Related
Sep 19, 2005
Ok,I just need to know how to get the last record inserted by the highestIDENTITY number. Even if the computer was rebooted and it was twoweeks ago. (Does not have to do with the session).Any help is appreciated.Thanks,Trint
View 2 Replies
View Related
Feb 26, 2014
From standard SELECT need to display specific column values normally, together with any NULLs in the same column not as NULL. My below effort parses however does not change to <new_value>.
SELECT[Server],
[db_name],
(CASE WHEN last_db_bkup_date IS NULL THEN '<new_value>' ELSE last_db_bkup_date END) AS last_bkup_date, [Backup Age (Hours)]
FROM [tbl]
View 5 Replies
View Related
Apr 9, 2015
I'm working on a join between two tables where I only want one row returned... I'm matching on two columns between two tables. One of those columns in the target table could be null. I only want one record returned.
create table #vehicle(id int, vehiclemake varchar(10), vehiclemodel varchar(10), classtype varchar(1))
create table #class(id int, classtype varchar(1), value int)
insert into #vehicle values(1, 'AUDI', 'R8', 'A')
insert into #vehicle values(2, 'AUDI', null, 'B')
insert into #class values(1, 'A', 100)
insert into #class values(2, 'B', 1)
[Code] ....
Using the above example, if VehicleModel is anything other than 'R8' is specified then I want it to return the other class type record.
This is going to be used as a join within a bigger statement, so I'm not sure ordering and returning top 1 is going to work.
View 9 Replies
View Related
Nov 24, 2006
Hi, all here,
Thank you very much for your kind attention.
I am wondering if it is possible to use SSIS to sample data set to training set and test set directly to my data mining models without saving them somewhere as occupying too much space? Really need guidance for that.
Thank you very much in advance for any help.
With best regards,
Yours sincerely,
View 5 Replies
View Related
Aug 1, 2014
I'm working with a third-party database (SQL Server 2005) and the problem here is the following:
- There are a bunch of ETL processes that needs to insert rows on a table (let's call this table T) and at the same time, an ERP (owner of T) is up and running (reading, updating and inserting on T).
- The PK of T is an Integer.
Today all ETL processes uses (select max(ID) + 1 from T) to insert new rows, so just picture the scenario. It is a mess! Everyday they get duplicate key error when 2 or more concurrent processes are trying to insert a row (with the max) at the same time.
Considering that I can't change the PK, what is the best approach to solve this problem?
To sum up:
* I need to have processes in parallel inserting on T
* I can't change anything on T
* The PK is NOT an Identity
View 4 Replies
View Related
