Hi all,
I got this problem which makes me struggle in the last few days.
I am able to connect to my local server using a query analyzer or calling sql commands in a window application, but there's no way I can access it in Management Studio: by clicking "Connect" it just waits forever, and it doesn't respond to any other command (it must be shut by terminating the process)
Got any hints?
Thanks
Mauro
I have a sql server 2005 remotely, need to connect from client using sql management studio. I am unable to connect from one of the client machine and able to connect from different machine.
The tcp/ip, named pipes and sql browser is enabled in (sscm)server and windows firewall is off in client.
I am getting (provider: sql network interfaces, error 26 - error locating server/instance specified)
Please throw your suggestions.
I am trying to connect to a sql server 2005 server using either the SQL Server Management Studio program using either windows auth or sql server auth but I can not. When I click on the connect button to connect to a server it never connects. I can not cancel once I press connect. It never times out after I press connect. I removed all registered servers that were registered previously. I have uninstalled all software that involved sql server (and sql2000) run a registry cleaner(not microsofts), installed the software to a new directory and still I can not connect to the sql2005 server (the only db).
I tested the connection from my machine to the production database system using osql and it worked fine. I registered the server tested the connection (using the management studio) and it tested fine. When I try to connect to the database engine it does not work.
When I had another user login to my machine and launch the SQL Server Management Studio I noticied that it ran a configuration utility for first use. When I uninstalled the SQL Server Management Studio on my machine it never came up again. Is there any way that I can get the configuration utility to run again on my account?
Any ideas? Things to test?
Dear All,
I am trying to connect to a remote sql server 2005. So I have install the Microsoft SQL Server Management Studio Express. When I try to connect I get the error below.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53). Can some one please help. I have even port no 1533 on my pc. Thanks.
Hi,
I have 2 servers (test ,preprod ) with sql2005 and reporting services
Using SQL Server Management Studio I can connect on reporting services on test server
specifying server name http://smcanSQL10-tst/reportserver or smcanSQL10-tst
but for preprod server I have to specify
http://smcanSQL10-ppd/reportserver
if I simply put smcanSQL10-ppd application raise error
The machine could not be found (Microsoft.SqlServer.Management.UI.RSClient)
Is any setting missiing in my server configuration?
I am trying to connect to a sql server 2005 server using either windows auth or sql server auth but I can not. When I click on the connect button to connect to a server it never connects. I can not cancel once I press connect. It never times out after I press connect. I removed all registered servers that were registered previously. I have uninstalled all software that involved sql server (and sql2000) run a registry cleaner(not microsofts), installed the software to a new directory and still I can not connect to the sql2005 server (the only db).
Any ideas?
I am running Windows XP with latest services packs for both windows and sql server. I have visual studio 2005 installed on my machine and I have had sql express installed on it previously.
Hi:
I have 4 named instances of SQL 2005 running on one of our sales server (dont ask me why I have 4 instances.Its a beefy box btw). All the instances have SSIS Packages (around 6-7 in each instance) saved to the SQL server and not to the file system. The issue is every time i need to look at the packages or export the packages from SSMS I have to edit the MsDtsSrvr.ini.xml and type in the named instance name within the <ServerName></ServerName> tag . I then have to restart my SSIS. I dont see an easier approach to this method.
This is causing me a lot of unnecessary time waste. is there anyway this can be automated where in i can pass the instance name dynamically to the ini file or even more best, can I have all the instance names in the ini file and some how look at the packages in each Instance. I am not sure how having all the instance names in the ini file woud resolve the issue though.
I know I can use BIDS which is much more flexible and a recommended approach but need a solution for looking at SSIS packages through SSMS in all of the 4 instances. I look forward to recommendations from anyone who have better ideas and suggestions.
Thank you
AK
Hello,
I am having problems connecting to my SQL Server instance with Management Studio; basically the setup is as follows;
*Single server running windows 2003 enterprise - in a workgroup not domain
*SQL Server is installed on this machine
*When I try and connect from the same machine using its own IP address and Windows authentication I get the 18452 error "login failed for {NULL} user"
I am testing it like this because Sharepoint is failing in configuration wizard because it is connecting the same way - at least the login failure audit logs say the same.
Many thanks for answers
Hello,
I use visual studio express 2005, and just downloaded Management Studio Express. (I have SQL Express).
I've already created my projects and created database tables and everything but I do not know how to connect an existing database to management studio. Can someone tell me how to connect an existing database to management studio?
Thanks,
Computergirl
Hi,
The issue,
I have had SQL express installed and working ok, however, I can no longer connect
OS: XP sp2.0
.net installed
ver1.1 .. 2.0 sp1, 3.0sp1 and 3.5
The install of SQL was using the SQLEXR_adv download
I have removed SQL and all associated applications folders and windows SQL services
I have re-installed many times but always receive the same issue.
I re-built the .net 2.0
The issue I have is when I try and connect form my applications or with Express sql management studio I receive the following error:
It looks like a .net2.0 issue
TITLE: Connect to Server
------------------------------
Cannot connect to RNASHLTOPSQLEXPRESS.
------------------------------
ADDITIONAL INFORMATION:
The type initializer for 'System.Data.SqlClient.SqlConnection' threw an exception. (System.Data)
------------------------------
The type initializer for 'System.Data.SqlClient.SqlConnectionFactory' threw an exception. (System.Data)
------------------------------
The type initializer for 'System.Data.SqlClient.SqlPerformanceCounters' threw an exception. (System.Data)
------------------------------
Configuration system failed to initialize (System.Configuration)
------------------------------
Unrecognized configuration section system.serviceModel. (C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Configmachine.config line 136) (System.Configuration)
------------------------------
BUTTONS:
OK
------------------------------
Really confused ... I created 2 tables in a VB Express program (which went well). Problem is that I can't see/find those tables with MSME. I don't really understand how to connect the MSME to where the tables are. I created the tables under My DocumentsData and they are DBapp.mdf + DBapp_log.LDF and the tables are Items and Preferences. The VB application can "see" the tables OK.
Do I need to move the tables to C:Program FilesMicrosoft SQL ServerMSQL.1MSQLDATA (like the Adventureworks installation which I haven't done) or what?
Please help a newbie
Thanks
George
Is there a way to connect to database using Windows authentication as a different user than what you've logged in with to your desktop?
For example:
I log on to my desktop as mydomainme. I'm developing queries using Management Studio against a database (on another server) where mydomainme doesn't have access, but the admins have granted access to mydomainJobs1. I have the password for mydomainJobs1, and I'm hoping I can connect to the database using that account without having to log-off my local desktop as mydomainme and then re-login using mydomainJobs1.
The analogy in the file/share-permissions world would be using "net use" from a command prompt:
net use \SomeServer /User:mydomainJobs1 jobs1password
Anything similar for SSMS?
I have recently installed the SQL Server Management Studio Express but I do not find Management Tools in order to create scheduled backups and shrinking of the databases. I was under the impression that this should be included in the Management Studio. I use the SQL 2005 Express for smaller customers who run the SQL on a desktop unit. I need a way to backup the data to a server machine for backup purposes. I have uninstalled and reinstalled to no avail.
I have a database in my "App_Data" folder of my visual studio project. I can view it fine in Visual Studio's built-in tools for managing a database attached to a solution. However i recently started playing around with the SQL Server Management Studio Express program. When i attach my database to Management Studio, and try to run my program it crashes. I think it might be a permissions error?!? When i detatch it and reattach it in visual studio it runs fine again. Any suggestions? ThanksJason
View 1 Replies View RelatedHi all,
I want to do SQLCLR by Connecting to SQL Express User Instances in Management Studio via VB 2005 Express and I have read the following articles and books:
(i) Connecting to SQL Express User Instances in Management Studio in http://blogs.msdn.com/sqlexpress/archive/2006/11/22/connecting-to-sql-express-user-insta...
(ii) Managing SQL Server Express with SQL Server 2005 Management Studio Express Edition in http://www.microsoft.com/technet/sql/2005/mgsqlexpwssmse.mspx
(iii) Chapter 16 - Going Beyand Transact-SQL: Using the SQL Common Language Rutime (SQLCLR) in Microsoft SQL Server 2005 Express Edition for Dummies
(iv) Chapter 21 - Working with the Common Language Runtime in Microsft SQL Server 2005 Programming for Dummies
(v) Chapter 4 - Introduction to Common Language Runtime (CLR) Integration in Programming SQL Server 2005 by Bill Hamilton.
I want to create an SQLCLR project "HelloWorld" by Connecting to SQL Express User Instances in Management Studio via VB 2005 Express. But I am still not sure how to get it started, because I do not understand the following things:
(1) Pipe Name for a User Instance, (2) Enabling (or Disabling) the CLR by using Transact-SQL, (3) Creating a Transact-SQL script, (4) Creating an Assembly, (5) Creating a backup device, etc. I need to see some simple examples of SQLCLR by Connecting to SQL Express User Instances in Management Studio via VB 2005 Express. Please help and tell me where in the websites I can find them.
Thanks in advance,
Scott Chang
I am new to visual studio and I am still not sure of all its components and features.
I installed visual studio 2005 standard edition but cannot find SQL Server Management Studio?
I guess this must be because it is not included with Visual studio 2005 standard. Is it included with VS 2005 professional?
I want to add pictures of products to my shopping site using an SQL database and I’ve been told that SQL Server Management studio is required as it is a graphical tool.
How would I go about obtaining the SQL server management studio. There seems to be different versions of SQL server that it is confusing to know which one to purchase.
Will the SQL server 2005 version that comes with Visual studio standard be sufficient for me now right? I want to create a shopping site with hundreds, perhaps even thousands of products. I want to use an SQL server 2005 database. The database will include ‘dynamically generated’ product images if that is the correct terminology.
My goodness, it seems I still have so much to learn.
Thanks
How do i get the database that i am using in visual studio into my SQL server management studio?
i need to create some scripts to create stored procedures on a live server.
When I connect using SQL SERVER MANAGEMENT STUDION, i get following error:
The type initializer for 'AsyncWmiBinding' threw an exception. (Object Explorer)
Additional Information: unable to load 'sqltoolsvsnativehelpers.dll': Access is denied. (Exception from HRESULT: 0x80070005(E_ACCESSDENIED))(Object Explorer)
Please guide me to resolve this problem.
Thanks
Is it possible to run both Sql Server Management Studio: Express and full blown side by side?
I am developing with the full blown product but would like to test Management Studio Express on the same box.
Is this possible?
Thanks
Eric
I have SQL server 2005 developer edition installed on my machine. I was expecting something like Enterprise manager to manage databases but nothing is installed by default. Ive found SQL server management studio express and installed it, but Ive also seen references to SQL Server Management Studio. Are there any differences between the two , or are they the same and are just described differently ?? Im a bit confused, Microsoft should make this clear.
View 4 Replies View RelatedHey everyone,
Would someone please tell me why the new SQL Server Managment Studio comes with hardly not frills? What happened to the SQL Enterprise Manager in SQL Server 2000? It had DTS, SQL Agent Job and step viewing, Cool Wizards.. All that great stuff. but with this new Sql Server Management Studio with 2005 all I can do is pretty much look at the data and write queries and create and modify tables. Am I missing something?
I did download an external tool which was called an import/export wizard but it sucks compaired to the DTS in SQL 2000.
I did notice when I open my Sql Server Management Studio "Express" that it is the Express version... Is there a difference?
Thanks for any help.
i have SQL Server 2005 dev edition and i wanted to use SQL Server Management Studio so is it installed or i need to install the SQL Server Management Studio express edition ???
thx
I have installed SQL Server Management Studio (for SQL2005) to a pc. When the user boots the pc, the following error is received:
fmaagent.exe - Common Language Runtime Debugging Services
Application has generated an exception that could not be handled.
Process id =0x328 (808), Thread id=0x32c (812).
Click Ok to terminate the application.
Click CANCEL to debug the application.
After clicking on OK, the pc continues on its merry way and boots up successfully.
Does anyone know what would cause this error? I have checked the Microsoft site but did not find this error listed among the documents.
The PC is running Windows XP.
Thanks in advance.
Good Afternoon! I installed SQL Server Express 2005 but the GUI is not visible. Someone can tell me how to install it or where I can find the executable.
Thanks.
David writes "I am kind of new to SQL Server Management Studio.
How do I export tables and stored procedures from a database on my PC to a database by the same name located on a remote server."
Can I set a passport protection to a database (once I am connected to the SQL Server on my own machine) from not opening/browsing/stop even read access?
(I want something like log in authentication before I open/browse/double click on any database to expand basically)
Thanks for help
J.
I installed SQL 2005 in a few server but none of them have SQL Server Management Studio.
Where to find out them?
I checked c:...inn, there is now VSShell folder.
This is probably a noob question, but is it possible to install SQL Server Management Studio on a remote machine (i.e. my laptop)?
View 1 Replies View RelatedI have the "Ready to Launch" package, which includes Vidual Studio 2005 Standard Edition, SQL Server 2005 Standard Edition and something else called BizTalk Server 2006.
Anyway, Visual Studio is spread across two CD's and I have installed that. I now want to use the SQL Server Management Studio to administer a database I have running on a website. Anyway, SQL Server is on a DVD and when I put it into the drive it comes up with the autorun screen. I noticed that in the top left corner of this screen it says "SQL Server 2005 (Disc 1 of 2). However, there is no second disc, so I'm wondering if this is a problem or just a typo left over from the CD version.
There is two options in the menu under Install, "Server Components, tools, Books Online, and samples" and "Run the SQL Native Client Installation Wizard." I have tried both of these options and I still don't have the SQL Server Management Studio. In fact if I select the first option, when I get half way through the wizard, it asks what components I want installed. I cannot see any reference to the SQL Server Management Studio in this list, so I just select everything to be sure.
Once it has finsihed installing, all it does is create a Start Menu folder called "Microsoft SQL Server 2005" and another folder inside that called "Configuration Tools." This folder just contains a few things like configuration manager and surface area configuration, etc...
So where do I find this SQL Server Management Studio? Have I done something wrong or am I missing something (like a second disc)? I'm installing on to Windows XP, would that cause the problem? Do I need to be installing on to some sort of server OS (which I don't have BTW as I'm just a regular user looking for a way to administer my MS SQL database and I heard this tool was the way to go)?
Hi everyone,
I am trying to connect to my reporting server, but in Management Studio
my server type only shows 'Database Engine'. I have SQL Server Reporting Services running and I can connect to the report manager.
I would like to define a new role in Management Studio, how can I do this?
Also, in my report manager site, I do have the link to add roles.
Hi,
I have just completely installed MS SQL Server 2005 Express Edition in MS Server 2003.
After installation, I only have the Configuration Manager, Error and Usage Reporting and Surface Area Configuration, listed under Configuration Details.
SQL Server Management Studio is not accessible anywhere.
I also do not have the folder C:Program FilesMicrosoft SQL Server90ToolsBinnVSShell in which the SQL Server Management Studio is installed.
What must I do to get this component installed?
In this article http://msdn2.microsoft.com/en-us/library/ms143219.aspx, it is also written in step 8 that there should be a "Components to Install" page. I have done the installations and uninstallations a few times, but I still do not have "Components to Install" page. In fact, after step 7, I am brought to the "Features Selection" page.
What can I do to solve this problem? Please help.
Thanks.
During SQL 2005 Standard edition the Management Studio did not install. how can I get it to install?
When attempting to start the SQL Server 2005 Management Studio from the Start Menu on my Windows 2003 SP1 server, I quickly get the error, "The Application failed to initialize properly (0x80000003). click on OK to erminate the application. I am accessing the server from my Windows XP Workstion using Timbuktu Pro Remote control software. I have no problem attaching to the SQL Server database on this server when connecting to it from my Workstation install of Management Studio. The SQL Server Business Intelligence Studio launches fine in the Timbuktu session as does SQL Server Configuration Manager. The Configuration manager shows all services (for both my Default and Named Instance) in the Running state.
Please help.
Rob