ProcessInput Method Fails With Error Code 0xC0202009
Jan 3, 2007
Hello,
I have a Data Flow Task within an SSIS package where data is pulled from a Fixed Width flat file, goes through a conditional split, and sends data either to a SQL Server 2000 table, or to another fixed width flat file.
The first condition in the conditional split checks for the following; [Column 44] + [Column 45] != "D1" . If this is true, then those rows go to a SQL Server 2000 table destination. If false, then the rows go to another flat file.
The SQL Server 2000 table has a unique nonclustered index with ignore_dup_key. From what I can tell, it looks like the step fails when a duplicate record is encountered. However, it appears that the unique records still go into the table.
When I check the 'Progress' tab of the package, the following steps seem to be suspect;
[Populate Staging [786]] Information: The final commit for the data insertion has started.
[Populate Staging [786]] Error: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80004005 Description: "Duplicate key was ignored.".
[Populate Staging [786]] Information: The final commit for the data insertion has ended.
[DTS.Pipeline] Error: The ProcessInput method on component "Populate Staging" (786) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0202009.
[DTS.Pipeline] Information: Post Execute phase is beginning.
..and..
Task 2 Isolate Suspect Records and Insert Known Good Records failed
In one case, the source flat file had 74,101 rows. Each row tested true in the conditional split, and all but one row made it into the SQL Server table. The step failed, and the 'Progess' section containted the entries mentioned above.
The Connection Manager for the SQL Server table destination uses the Native OLE DBMicrosoft OLE DB Provider for SQL Server.
Is the 'error' that occurs when a duplicate row is encountered causing the Data Flow task to fail, or could it be something else?
Thank you for your help. Please let me know if you need more information.
I'm trying to create a simple Data transfermation. I have a flat file that came of a unix server.. it's 177 bytes wide.. thought it was 175, but when I created the flat file connector, I could see some extra characters on the end.
My output is going to be an excel spreadsheet, I only want two columns from the input. I created an oledb jet 4.0 connection. and followed instructions from here :
On my first attempt to dataflow, I ran into unicode errors and had to do this:
ran into a problem with unicode errors. went to the source for the flat file. for the output column in question changed to Unicode string [DT_WSTR].
When I run , here are the errors I get:
[OLE DB Destination [513]] Error: An OLE DB error has occurred. Error code: 0x80040E09. [DTS.Pipeline]
Error: The ProcessInput method on component "OLE DB Destination" (513) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0202009.
[GanchoFileSource [1]] Information: The total number of data rows processed for file "\ammia01dev04D$JCPcpmgancho_venta_20070321.sal" is 19036.
[GanchoFileSource [1]] Error: Setting the end of rowset for the buffer failed with error code 0xC0047020.
[DTS.Pipeline] Error: The PrimeOutput method on component "GanchoFileSource" (1) returned error code 0xC0209017. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
I have a SQL Server Agent job with a step to execute an SSIS package. The package has as one of it's connection managers the Connection Manager For Excel Files. When I run the job it fails every time. I have implemented logging and in the OnError event it states "The AcquireConnection method call to the connection manager "LOBMappingExcel" failed with error code 0xC0202009".
I've seen the previous threads on this (although maybe not all of them). However, i don't think I'm getting the error for the same reason. The full error I'm getting is:
The package runs fine if I run it by itself. Unfortunately we want to call it from another package and when we do so it fails everytime with the following error; "AcquireConnection method call to the connection manager "BPCSF" failed with error code 0xC0202009." This package is calling an AS400 and pulling data from it into a staging environment. The task that is failing is 4th task on the list and is the 3rd task to call the AS400 environment. If I need to provide more information I would be happy to do so. Any help would be greatly appreciated. Thanks!
I can run this package in Studio and it works fine, but when I run it from SQL Server Agent, it throws this error. Does anybody know what would cause this problem. This appears to occur during validation for the package because none of the data flow steps run. The connection being used is the same connection used in all of the data flows. If validation is done in order, then prior steps using the same connection are passing validation.
Error at Text Inbound Task [SQL Server Destination [9]]: The AcquireConnection method call to the connection manager "Server.Northwind" failed with error code 0xC0202009. Error at Text Inbound Task [DTS.Pipeline]: component "SQL Server Destination" (9) failed validation and returned error code 0xC020801C.
Please keep me posted with alternate work around(s) /solution(s).
I am struggling with this error and it's starting to get to me!
I have setup a simple project with just a data flow task. In this task, it retrieves a simple record "Select * From Table1 WhereId=1". The connection is an OLE Db connection using Advantage Oledb Provider (a provider for accessing dBase). It is accessing a Novell network drive. I have setup the package to both "EncryptSensitiveWithPassword" and "DontSaveSensitive". Both times i have received this error.
The funny thing is, when I set the package to "EncryptSensitiveWithPassword" and I setup a job to run the package, it never asks me for the password even though I set one up! I have a previous package (few months ago I made) that accessed the same database on the same Network drive and it works! It also asks me for a password when I try to modify or run the package (b/c I set it to "EncryptW/Password").
I am working on SQL Server 2005 (x64) with Windows Server 2003 (x64) operating system. I am having a major issue in SSIS. Here is the detailed explanation of the issue :
I have an EXCEL file in 2003 / 2007 version. It contains some data. I want to import the data using SSIS into SQL Server 2005 (x64) database table. I have taken "EXCEL FILE SOURCE" and "SQL Server DESTINATION". It was failed on importing data. Surprisingly it works fine in SQL Server 2005 (x32). Can you please explain why it is NOT woking on (x64) ?
Here is the error code i am getting:
[Excel Source [1]] Error: The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009.
I am using SSIS 2005 on Windows 2003 server. Using Excel Source to dump the data for staging database. I am getting following error while I execute it through BI studio's execute button.
I have deployed my packages into Sql Server and I am using Configuration File. As my Data Source is Excel, I have changed the connection string during deployment with Server Path. But I am getting the following errors. Actually the File Exist in Path. May I know What is cause of the issue? Do I need to give any permission to execute the package.
SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
component "Excel Source Service Contract Upload" (1) failed validation and returned error code 0xC020801C.
One or more component failed validation.
There were errors during task validation.
DTS_E_OLEDBERROR, Error Code: 0x80004005 Source: "MS JET DB Engine" Description : Path is not valid
I have written a custom data flow component that counts the rows coming through the pipeline and adds the counts to an object stored in a package variable.
The component sometimes generates warnings with the following message - "A call to the ProcessInput method for input 358 on component "<Component Name>" (354) unexpectedly kept a reference to the buffer it was passed. The refcount on that buffer was 4 before the call, and 5 after the call returned.".
The component is used several times throughout ~60 packages. It does not always occur on the same instance, or even in the same package, from one occasion to another. When all the packages are executed (from a master package - some in parallel and some in series) the warning is generated several times (around 10), but the warning is not generated at all when the packages are executed individually from BIDS. The values of the refcounts vary from message to message, but the difference is always 1 more after the call than it was before. The server has SP1 and the hotfix package installed, but the warning was being generated before SP1.
I do not understand what could be keeping a reference to the buffer. The ProcessInput method is very basic:
public override void ProcessInput(int inputID, PipelineBuffer buffer) { try { if (!buffer.EndOfRowset) { totalRowCount += buffer.RowCount; } } catch (Exception ex) { bool cancel = false; ComponentMetaData.FireError(0, ComponentMetaData.Name, ex.Message, string.Empty, 0, out cancel); throw new Exception("Could not process input.", ex); } }
Does anyone have any idea what could be causing this, or ideas for things I should be investigating?
I cannot execute a package by using Execute Package task. I supplied sa credentials to connection manager, and it shows the list of Packages on SQL Server but when running the task it says
Error 0xC0202009 while preparing to load the package. An OLE DB error has occurred. Error code: 0x%1!8.8X!.
I have developed a .dtsx package than runs normally from my computer. When I import it on the server and assign it to a job it always fails.
I tried also to run it directly from the server (remote desktop) and also faild. I exported the dtsx file on server and refresh the db connections and after that workd fine from the server.
Another work-around was to use windows authentication. Then runs normally from the server.
It seems that connection password is lost when importing the report on server. (The import is done in MSDB not in the filesystem)
But I can not design all the jobs on the server (work-around A) or use windows authentication (work-around B)
What is the problem and what can I do?
I have also played around with "save sensitive information" but with no results.
I export data from a dozen tables of one database to another database on another server regularly and it works well. However, if i choose the option of "save SSIS package", I get the following error:
TITLE: SQL Server Import and Export Wizard ------------------------------
The ExistsOnSQLServer method has encountered OLE DB error code 0x80004005 (Client unable to establish connection). The SQL statement issued has failed.
------------------------------ BUTTONS:
OK ------------------------------
I use management studio to do this, but the servers are 2000.
I am applying hourly differential backup to the backup server from production with the following command. This command makes the database on standby server into read only mode.
RESTORE DATABASE ARSYSTEM FROM DISK = 'E:SQL backup from productionsql_full_backup' WITH MOVE 'arsystem' TO 'd:ardataarsystem.mdf' , MOVE 'arsystem_log' TO 'D:ARLOGARsystem' , STANDBY = 'E:SQL backup from productionSQL daily diff back up'
Now I want to run a command which will put the database in write mode. I have created a job which would make the datbase Write mode. This job runs successfully sometimes and fails sometimes. I need to ensure that the job always succeeds. When it fails, how do I troubleshoot and what is the possible fix?
Thanks in advance.
The error message is
Cannot apply the backup on device 'E:SQL backup from productionSQL daily diff back up' to database 'ARSYSTEM'. [SQLSTATE 42000] (Error 3136) RESTORE DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013). The step failed.
The steps for the job are as follows with the failing step highlighted in bold.
copy /y "\172.31.9.12Remedy BackupackupSQL backupsql_full_backup" "E:SQL backup from productionsql_full_backup"
copy /y "\172.31.9.12Remedy BackupackupSQL backupSQL daily diff back up" "E:SQL backup from productionSQL daily diff back up"
xp_cmdshell 'net stop "bmc remedy action request system server"'
exec rp_kill_db_processes 'ARSYSTEM'
RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionsql_full_backup'
WITH
MOVE 'arsystem' TO 'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
NORECOVERY
Failing step
RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionSQL daily diff back up'
WITH
MOVE 'arsystem' TO 'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
RECOVERY
xp_cmdshell 'del /f "E:SQL backup from productionsql_full_backup"'
xp_cmdshell 'del /f "E:SQL backup from productionsql daily diff back up"'
xp_cmdshell 'net start "bmc remedy action request system server"'
I have scheduled the following hourly diffential restore job too which never fails.
RESTORE DATABASE ARSYSTEM FROM DISK = 'E:SQL backup from productionsql_full_backup' WITH MOVE 'arsystem' TO 'd:ardataarsystem.mdf' , MOVE 'arsystem_log' TO 'D:ARLOGARsystem' , STANDBY = 'E:SQL backup from productionSQL daily diff back up' EXEC MASTER..XP_CMDSHELL 'del /f "E:SQL backup from productionSQL daily diff back up"'
We are performing merge replication between SQL Server 2005 and SQL Server Mobile with more than 1100 handheld, and recently replications are terminating with eror code 80040E19. We can only avoid the problem by deleting the related user's partition directory and reruning the related user's dynamic snapshot.
Hi All, I am getting the following error if I am using the package "Transaction Option=Required" while running through Sql Job: The AcquireConnection method call to the connection manager "<connection name>" failed with error code 0xC0202009.
while I running the SSIS package on BI environment, I am getting the following error: [Connection manager "<connection name>"] Error: The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D00A "Unable to enlist in the transaction.".
I know the alternative solution is to make the "Transaction Option=Supported", but in my case I have run the whole flow in a single transaction. I came to know that this has been fixed in the service pack1(ref. to http://support.microsoft.com/kb/914375). FYI.. some time it was running successful.
I have taken all the necessary step to run the SSIS package in a distributed transaction(like the steps for MSDTC) and also created the package flow in a sequence.
I was going through the link - http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=160340&SiteID=1 but all those didn't solve my problem.
If anyone can help me it will be great. or it is a bug in SSIS?
SQL Server Express update KB921896 fails to install with error code 00002b2. I've tried this update several times with no luck. HELP offered is no help. Can't find this error code, and there is no text with the code.
I have s Script Component, that retrieves data from NTEXT column using this code:
Dim b As Byte()
If (Row.OutputXML.Length > 0) And (Not (Row.OutputXML_IsNull)) Then
b = Row.OutputXML.GetBlobData(0, CInt(Row.OutputXML.Length))
End If
I´m getting this error:
[Script Component 1 [838]] Error: System.Runtime.InteropServices.COMException (0x80004005): Error HRESULT E_FAIL has been returned from a call to a COM component. at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception e) at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.ProcessInput(Int32 inputID, PipelineBuffer buffer) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper90 wrapper, Int32 inputID, IDTSBuffer90 pDTSBuffer, IntPtr bufferWirePacket)
OutputXML column is filled by Ole Db Command from an output parameter (nvarchar(max)) of a stored procedure. In management studio sp works fine, even Execute SQL Task returns correct (but truncated) data.
HI I'm still in the middle of this 2000 to 2005 64 bit migration!! I have managed to create an oledb connection to my informix db. Within the data flow I wanted to create a simple data pump from my infdormix db to S2K5 db.
Now in the OLEDB source I have done a select froma table to which I can view. I also set the always use default code page to true.
On the error box I get
[OLE DB Source [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Live@jvert07_se.service" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. Error 1 Validation error. Reason code: OLE DB Source [1]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Live@jvert07_se.service" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. Cerptransfer.dtsx 0 0
Also when I try to execute it I get
Package Validation Error ------------------------------ ADDITIONAL INFORMATION: Error at Reason code [OLE DB Source [1]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Live@jvert07_se.service" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. Error at Reason code [DTS.Pipeline]: component "OLE DB Source" (1) failed validation and returned error code 0xC020801C. Error at Reason code [DTS.Pipeline]: One or more component failed validation. Error at Reason code: There were errors during task validation. (Microsoft.DataTransformationServices.VsIntegration)
We have an Access97 database with 122 tables. I try to use import and export wizard to import the data from access into SQL 2005 database. I find an interesting problem. When select all tables, the wizard give following errors:
Pre-execute (Error) Messages Error 0xc0202009: {DBD1EAB5-7865-4B89-A7BB-DDC8507D8119}: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Unspecified error". (SQL Server Import and Export Wizard)
Error 0xc020801c: Data Flow Task: The AcquireConnection method call to the connection manager "SourceConnectionOLEDB" failed with error code 0xC0202009. (SQL Server Import and Export Wizard)
Error 0xc004701a: Data Flow Task: component "Source 64 - PlanClasses" (5206) failed the pre-execute phase and returned error code 0xC020801C. (SQL Server Import and Export Wizard)
But if I divide importing as 2 steps: 1. import all tables before PlanClasses, it works. 2. import all tables after PlanClasses including PlanClasses, it works.
If I just import PlanClasses itself, it works, but I can not import all tables at once. Interesting thing is if I just unselect PlanClasses, it will have same error at the class right after PlanClasses. Is there size limitation when doing import at once?
When I attempt to import a table from another SQL 2005 server to mine, I recieve the following error:
- Pre-execute (Error)
MessagesError 0xc0202009: Data Flow Task: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.". (SQL Server Import and Export Wizard)
Error 0xc0202025: Data Flow Task: Cannot create an OLE DB accessor. Verify that the column metadata is valid. (SQL Server Import and Export Wizard)
Error 0xc004701a: Data Flow Task: component "Destination - vwQualitySurvey" (226) failed the pre-execute phase and returned error code 0xC0202025. (SQL Server Import and Export Wizard)
Is there anything that I can do to try and rectify this?
I have an SSIS project that is deployed to a sql server.
The setup of the project is a parent dtsx package, and many child packages.
The parent executes each of the chid packages.
If I run the parent from BIDS, calling the children that are on the SQL Server, it works fine.
If I execute it from SQL Management Console running on my laptop, connected to the SQL Server, It works.
If I remote into the SQL Server and run it from SQL Agent or SQL Management Console, the job fails with the error:
Error 0xC0202009 while preparing to load the package. SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x%1!8.8X!. for each of the children.
This has quite suddenly stopped working, and I cannot figure out why it will work being executed from my laptop, but not on the server.
I get 2 errors when I run a job in sql server agent 2005 0xc0202009 and 0x80040E2. I cannot see why I am getting these errors, when I run the job with dtexec it is successful. Also when I run it in the debugger or run the executeable it is successful. But when I try to run it with the agent it fails. Any Ideas would be greatly appriciated.
I have developed a simple SSIS Package that will export data from an AS400 iSeries server to a flat file. When I try to debug the package I receive this error. I have tried to change the security level of the package to EncryptAllWithPassword and specified a password. For some reason the password for the connection to the AS400 is not being retained. when I enter the password the following error disappears when I try to debug the package the error returns. Does anyone know how to correct this? Thanks in advance for your help.
Things to also know:
I am using a Native OLE DBIBM AS400 OLE DB Provider w/user name and password (Allow saving password checked) Test Connection succeeded.
I am using a OLE DB Source to extract the data with Data Access Mode of Table or View. When I try to select a table I am prompted from the AS400 to enter password. Then I can see the tables.
I can select the columns I need and click OK to save.
Error 1 Validation error. Data Flow Task: OLE DB Source [39]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "SERVERNAME.USERNAME" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. SSIAS400DataExport.dtsx 0 0
I'm new on this forum, but, I'm a experienced programmer. I wanna solve this problem (if you can helpme....), recently, I'm trying to migrate an old SQL 7 to the new SQL 2005 server enterprise edition, I have no problem to import the data, users, stored procedures, etc. and all work fine, I can connect troght ODBC from the others computers, including some older pentium 1 mmx 200 mhz. with WIN98 (yes!).
My problem is an legacy VB6 application that work (well fine) with SQL7 server, but, when i change the odbc of the desktops systems to the new 2005 SQL server and run this legacy application hi recibe this error: (english translation from spanish language)
[ODBC SQL Server Driver][SQL Server] The table to be modified is not included on this cursor or these can't be modified throught this cursor.
I have look on the source code of the legacy application, and someone of the segment's that causes error is:
Public Function ConsultaCamara(sRutOP As String, _ sRut1 As String, _ strConsulta As String, _ Tipo As String, _ chk As CheckBox, _ Timer1 As Timer, _ LbAviso As Label) As Long '---------------------------- Dim rsCACH, rsCACH_upd0, rsCACH_upd1, rsCACH_upd2 As ADODB.Recordset Dim CmCACH As ADODB.Command Dim lPendiente As Boolean Dim lActivo As Boolean Dim strSQL1, strSQL_upd0, strSQL_upd1, strSQL_upd2 As String Dim StrWHE As String Dim DameTiempo As Integer Dim snombre As String Dim sMsgEstado As String Dim sAviso_Inicial As String Dim cNum As String Dim cDig As String ... ... ... 'Defino el string de consulta strSQL1 = " SELECT RUTOPERADOR, " & _ " IDCAMARA, " & _ " RUTCONSULTADO, " & _ " ESTADO, " & _ " CANCON, " & _ " CADENACONSULTA, " & _ " FINGRESO, " & _ " FULCONSINT, " & _ " ULTRUTOP " & _ " FROM BOLETIN " & _ " WHERE RUTCONSULTADO = '" & sRut1 & "'" & _ " AND (ESTADO = 'PE' OR ESTADO = 'AC' )"
Set rsCACH = CreateObject("ADODB.Recordset") rsCACH.ActiveConnection = cn rsCACH.CursorType = adOpenKeyset rsCACH.LockType = adLockOptimistic rsCACH.Open strSQL1 If rsCACH.EOF Then 'No hay registro antiguo o en consulta, creo uno para consultar sMsgEstado = "NO Existen datos ES REGISTRO NUEVO" & vbCr rsCACH.AddNew ConsultaCamara = GeneraID() rsCACH.Fields("IDCAMARA") = ConsultaCamara rsCACH.Fields("RUTOPERADOR") = sRutOP rsCACH.Fields("RUTCONSULTADO") = sRut1 rsCACH.Fields("ESTADO") = "PE" rsCACH.Fields("CANCON") = 1 rsCACH.Fields("CADENACONSULTA") = strConsulta rsCACH.Fields("FINGRESO") = GetDateTime() 'Format(Date, "Short Date") rsCACH.Fields("FULCONSINT") = GetDateTime() 'Format(Date, "Short Date") rsCACH.Fields("ULTRUTOP") = sRutOP rsCACH.Update <----- here's launches the error ... ... ...
Hi, The attached code gives the error "One or more errors occured during processing of command"
What I am trying to do is simply copy a table ("inventry") to a new table name ("bob"). Eventually I want to create a new table based on a filter (as i would using the SELECT INTO command in sql)
Hi, i'm new to reporting services, rather new to heavy processing in reporting services. i have scenario for which i need your help. so here it goes,
i have a method in Code area of the report, i'm passing parameter values to it. the method willl return me a swl query in string format. i need to execute it in data tab area. the codei have used in data tab is as below. please let me know. wat to do to make it right. thx
EXEC ('Code.Main(Parameters!Param1)' + UNION + 'Code.Main(Parameters!Param2) ' + UNION ALL + 'Code.Main(Parameters!Param3)')
Thx again
i need to get this report done really soon, so please, if u have any idea let me know ASAP
I have a SSIS package that reads the data from an Excel file using an Excel Connection Manager and imports the data to a table on a SQL Server 2005 DB instance.
When I run this package locally on the server the package being on the file system, the package executes perfectly. Now I upload the package to the msdb database and the run the package from there and the package still executes successfully.
Now I schedule the package to run as a SQL Server Agent job and the package fails and when the logging is enabled I see this in the log file;
OnError,WEB-INTSQL,NT AUTHORITYSYSTEM,Copy to CRN-ALLOCATION_COMMENTS_TEMP,{40A6BF6E-7121-448B-A49D-DED58FDC746A},{BD991566-F4BD-41BC-AEBF-264032D8D0D3},5/9/2006 1:54:52 PM,5/9/2006 1:54:52 PM,-1071611876,0x,The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009.
OnError,WEB-INTSQL,NT AUTHORITYSYSTEM,Copy to CRN-ALLOCATION_COMMENTS_TEMP,{40A6BF6E-7121-448B-A49D-DED58FDC746A},{BD991566-F4BD-41BC-AEBF-264032D8D0D3},5/9/2006 1:54:52 PM,5/9/2006 1:54:52 PM,-1073450985,0x,component "Allocation Comments" (1) failed validation and returned error code 0xC020801C.
I am wondering why the AcquireConnection method call is failing when the package is scheduled? I am running the step as a SQL Agent Service Account and it is the Local System account that starts up the SQL Server Agent and Server and is an Administrator on the box.
Recently in an SSIS package I am getting the following error for a particular Data flow task.
Error: 2008-01-25 12:01:48.58
Code: 0xC0202009
Source: Import Datasynapse Data User Events Source [3017]
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8000FFFF.
End Error
Error: 2008-01-25 12:01:48.73
Code: 0xC004701A
Source: Import Datasynapse Data DTS.Pipeline
Description: component "User Events Source" (3017) failed the pre-execute phase and returned error code 0xC0202009.
End Error
Our guess is when the data size of User Events table is more it throws this error. If we try to transfer small subset of data it succeeds. What could be reason for this error?
Since this is very urgent, immediate response would be very much appreciated.
I've created an SSIS package that contains a Sequence Container with TransactionOption = Required. Within the container, there are a number of Execute Package Task components running in a serial fashion which are responsible for performing "Upserts" to dimension and fact tables on our production server. The destination db configuration is loaded into each of these packages using an XML configuration file. The structure of these "Upsert" packages are nearly identical, while some execute correctly and others fail. Those that fail all provide the same error messages.
These messages appear during Pre-Execute
[Insert new dimension record [1627]] Error: The AcquireConnection method call to the connection manager "DW" failed with error code 0xC0202009.
[DTS.Pipeline] Error: component "Insert new dimension record" (1627) failed the pre-execute phase and returned error code 0xC020801C.
... which are followed by
[Connection manager "DW"] Error: The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D00A "Unable to enlist in the transaction.".
[Connection manager "DW"] Error: An OLE DB error has occurred. Error code: 0x8004D00A.
While still in debug mode, I can check the properties of the "DW" connection and successfully test the connection within the packages that fail.
The same packages run successfully when tested outside the container (i.e. no transaction) or when the configuration file is modified to point the "DW" connection to a development version of the db which is running on the same server as the source database.
I have successfully used DTCtester to verify that transactions from source to destination server are working correctly. Also tried setting DelayValidation = True with no change. I have opened a case with Microsoft and am awaiting a reply so I thought I'd throw a post out here to see if anyone else has encountered this and might have a resolution. Here's some more on the environment:
Source Server:
Windows Server 2003 Enterprise Edition SP1 SQL Server 2005 Enterprise Edition SP0
Destination Server:
Windows Server 2003 Enterprise Edition SP1 SQL Server 2000 Enterprise Edition SP3 (clustered)
Thank you in advance for any feedback you might be able to provide.
I have some code that sorts a column logically even if it contains both numbers and text. But I've found that SQL converts certain characters automatically....
Here is the code...
SELECT * FROM TABLE
order by case when isnumeric(fieldname)=1 then right(replicate(' ', 10 ) + convert(varchar,convert(numeric(10),fieldname)),10) else fieldnameend --10 is the length of the field
The issue I've run across is that if my column contains the following strings(5D000,5E000,4E001) it thinks they are numeric then the THEN part of the condition causes a typecasting error....
I found out that any certain combinations of number + E or D + 0. Does anyone know a way to get around this? Try it out select isnumeric('5E0303') will return 1
