Carlos writes "I am trying to create a sp that would jump from one DB to another using the USE command. I built a string and then I tried to run EXECUTE(@SQLString) with no lock. This is the sample code I am using:
declare @DBName varchar(200)
declare @SQlString varchar(300)
set @DBName='model'
set @SQlString = 'use '+@DBName
execute(@SQlString)
Is there any way I can accomplish that?
Thanks
Carlos"
I have a list box populated by a SqlDataSource with a basic statement of Select name where location = @location. Location is bound to a dropdownlist control. I want to have a checkbox for the Location dropdownlist and a checkbox for another dropdownlist (for the alphabet) that will select only those people with a last name of the letter selected. Changing the checkbox would change the sql statement.
OK so there are two questions here:
1. How can I write a sql statement that would select only people whos last name begins with a certain letter. Would it use some sort of convert function to a string with only 1 letter?
2. How can I programatically change the sqlDataSource's 'select' statement. I need to switch between sorting by location and sorting by alphabetical last name. All of my previous experience has had me configuring the datasource in the asp.net code.
Thanks in Advance.
Hi Everyone,
I am trying to change the select statement of an sqldatasource if a check box is checked.
I am using the SqlDataSourceSelectingEventArgs but i can't get it to work, anyone got any pointers?
Code BehindProtected Sub LocMan_Searching(ByVal sender As Object, ByVal e As SqlDataSourceSelectingEventArgs) Handles LocManSearch.Selecting
If cb_Today.Checked = True ThenLocManSearch.SelectCommand = "SELECT * FROM [LocMan_CV] WHERE ([area] LIKE '%' + " & dd_Area.SelectedValue.ToString() & "+ '%') AND [available] LIKE '%' + " & Date.Today & "+ '%')"
Else : LocManSearch.SelectCommand = "SELECT * FROM [LocMan_CV] WHERE ([area] LIKE '%' + " & dd_Area.SelectedValue.ToString() & " + '%')"
End If
End Sub
My SQLDATSOURCE
<asp:SqlDataSource ID="LocManSearch" runat="server" ConnectionString="<%$ ConnectionStrings:MYLOCDEVConnectionString %>" >
<SelectParameters>
<asp:ControlParameter ControlID="dd_Area" Name="area" PropertyName="SelectedValue"
Type="String" />
</SelectParameters>
</asp:SqlDataSource>
Thanks in advance
Chris
I have consistent column names that load into a grid view. I now need to change the names in the grid view programatically. I was originally trying to get cute with SQL to do this, but I've been told my below solution will not work and I'm better off to do this in the presentation layer. If this is true, remember I'm still wet behind the ears here...how do I do this in vs2005?
Here's my post to the SQL devs to give you an idea what I'm trying to do.
I have a query that grabs fields from a denormalized table. The result is column names Week1, Week2, Week3....Week26. Users want to see the actual date instead of Week#. So I have a table (lkpdatecaptions ) that contains the fields "fldfieldno" and "Fldcaption". fldfieldno Fldcaption----------- --------------11 9/07/200712 9/14/200713 9/21/2007So fieldno 11 represent week1 and so on. So my hope is to update the alias with a query like: Select fldcaption from forecast.tlkpdatecaptionswhere fldfieldno = 11That quey returns the value of 9/7/2007 and is the value I need to represent the coumn alias name.My current query looks like this:SELECT SUM(forecast.tblforecastdenormalized.fldwk01) AS WEEK1,So can I do something like the following?SELECT SUM(forecast.tblforecastdenormalized.fldwk01) AS (Select forecast.tlkpdatecaptions.fldcaption from forecast.tlkpdatecaptions where fldfieldno = 11), ...
Wanted to enquire how this is done. Tried doing it in the setUsageType method I have overwritten but only allows description to be changed. Basically need to change "Name".
Best option would be to change it instantly when a user selects a column from the inputs in the custom component, ie. it changes the Output Alias to a desired value. (Input tab in advanced editor)
All this is being done in a custom component which I would like to be synchronous, can achieve a similar result asynchronously.
Thanks
Using ADO.NET Or regular queries on SQL Server, is there a good way ofdetermining if a Stored Proc will be returning a result set or if it isa non-query that does all I/O through parameters?Thanks.
View 1 Replies View Related
Hi
I have a main report and sub report. The subreport has some fields like SYS, LOC, MSG etc.
But the report should display the values filtered basis on system. i.e. I must have a sub report
for SYS1 , SYS2 , SYS3 and so on. I can create a sub report for each system. But I want to create only subreport and
call them from the main report. How do I do this?
Thanks
Sai
Can anyone please direct me to an easy to understand Description, Article or Video tutorial that shows an example on how to programatically connect to an SQL database and retrieve data from a collumn using C# and VISUAL WEB DEVELOPER 2005 EXPRESS EDITION. Also, what namespace should be imported to do this? (From what I have gathered out of the help, it seem that System.Web.UI.WebControls is the one)
I am trying to create a "news letter" web page. I have a basic form and when I hit "send" then the code in the background should access the database with all the recipient info, and retrieve all the E-mail addresses, Names, etc. and include it in each e-mail.
( I don't know if it is just me, but the help included with VISUAL WEB DEVELOPER 2005 EXPRESS EDITION is extremely difficult to understand - from a beginner point of view).
Thanks!
Regards
Jan
Hi, I've written a SELECT statement that returns columns dependant on a bitwise parameter @Populate.SELECTCASE WHEN (1 & @Populate) = 1 THEN [Column1] ELSE Null END AS [Column1],CASE WHEN (2 & @Populate) = 2 THEN [Column2] ELSE Null END AS [Column2],CASE WHEN (4 & @Populate) = 4 THEN [Column3] ELSE Null END AS [Column3],CASE WHEN (8 & @Populate) = 8 THEN [Column4] ELSE Null END AS [Column4],etcIs this the most efficient way to acheive this since I am only seeing a small performance gain. It still returns all columns but depending on @Populate will leave some columns with Null values.Any help much appreciated, thanks.
View 7 Replies View RelatedHi All,
I am having problems getting values out of an sqldatasource.
I have 2 on the page, i am using one to insert into a table and the other to get a couple of values from another table for the insert.
the datasource i am trying to get the values from does a select with a querystring filter i need to grab a couple of fields out of it trhen do the insert on the other datasiource with a button click.
The insert is fine, i just don't know how to get the values out of the first 'select source'
Any pointers or suggestions most appreciated.
Cheers
In VS2003 I have a user defaults table that I would call in the OnLoad - No Postback section to get the user defaults and then used some of the fields from that recordset as Parameters for other recordsets that would also load in that same section and might even issue a different Sql statement based on the field. In VS2005 (VB.NET), I can no longer figure out how to accomplish this. I can use the SQLDatasource Control which seems much improved but I cannot even find the generated code which I would use as a quick way to create my own datasources in the OnLoad event. Where is this code now stored and how can I accomplish my objectives in VB.NET 2005 with the current framework or programatically create data sources as necessary as I did before?
View 3 Replies View Relatedhi i am trying to gernerate some tables ( first with a script and then with a stored procedure),, in ms server management studio exrress 2005 using the followingcreate table ip( id int IDENTITY NOT NULL, ip varchar(15) NOT NULL, hostname varchar(128) NOT NULL, primary key(id)) ; i store this in a new query (assume :right click associates the query to the current database ?) and run it and nothing happens its been a while since i did sql but i think the sql is ok....how or more specifically where is the appropriate place to run this code thankssimo stored as a new query
View 1 Replies View RelatedHi SQ Gurus,
Please help me with this issue that I am facing. I want to create a table programatically but want to pass its name as a variable. I would like to do something as follows:
CREATE PROCEDURE BS_Create
(@Name nvarchar(25))
AS
CREATE TABLE [dbo].[@Name](
[ID] [int] IDENTITY (1, 1) NOT NULL ,
[Prod_Name] [nvarchar] (75) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL
) ON [PRIMARY]
GO
The table name is passed in as a parameter. No matter what I pass as a parameter, the table name is '@Name', which is not what I want. Instead, if the variable contains the value 'Product', I would like to see a table with the name 'Product' to be created.
How can I solve this problem.
Any help is appreciated!
Krish Chandra
OK, so I'm working on a project that requires the dynamic generation of SQL statements. Now in Visual Studio .NET I'm sure many of you have used that wonderful visual database tool that allows you to magically "verify sql syntax" at the click of a button. It takes a query that looks like this:
"SELECT A.AFFID, A.UserName, A.Pass, A.FirstName, A.LastName, A.Company, A.Street, A.City, A.State, A.ZIP, A.Country, A.phone, P.EMail, A.RecieveEMail, A.SSN, A.JoinDate, A.AffType, P.ProductId, P.BuyerId FROM Affiliates A, Purchases P WHERE (ProductId > 0) ORDER BY 1"
and transforms it into something that looks like this:
"SELECT A.AFFID, A.UserName, A.Pass, A.FirstName, A.LastName, A.Company, A.Street, A.City, A.State, A.ZIP, A.Country, A.phone, P.Email, A.RecieveEMail, A.SSN, A.JoinDate, A.AffType, P.ProductID, P.BuyerID
FROM Affiliates A CROSS JOIN Purchases P
WHERE (P.ProductID > 0)
ORDER BY A.AFFID"
My question is: is there anything in the .NET platform that would allow me to achieve the same kind of result programatically (i.e. transform standard sql to tsql syntax and verify the syntax of the query at run time)?
Any help would be appreciated! Cheers.
I need some help with the following issue. I need vb.net code that will create a T-SQL script. For example given the orders table in northwind I would get the following with indexes, RI, ect. :CREATE TABLE [dbo].[Orders] ( [OrderID] [int] IDENTITY (1, 1) NOT NULL , [CustomerID] [nchar] (5) COLLATE SQL_Latin1_General_CP1_CI_AS NULL , [EmployeeID] [int] NULL , [OrderDate] [datetime] NULL , [RequiredDate] [datetime] NULL , [ShippedDate] [datetime] NULL , [ShipVia] [int] NULL , [Freight] [money] NULL , [ShipName] [nvarchar] (40) COLLATE SQL_Latin1_General_CP1_CI_AS NULL , [ShipAddress] [nvarchar] (60) COLLATE SQL_Latin1_General_CP1_CI_AS NULL , [ShipCity] [nvarchar] (15) COLLATE SQL_Latin1_General_CP1_CI_AS NULL , [ShipRegion] [nvarchar] (15) COLLATE SQL_Latin1_General_CP1_CI_AS NULL , [ShipPostalCode] [nvarchar] (10) COLLATE SQL_Latin1_General_CP1_CI_AS NULL , [ShipCountry] [nvarchar] (15) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ) ON [PRIMARY]GO
ALTER TABLE [dbo].[Orders] WITH NOCHECK ADD CONSTRAINT [PK_Orders] PRIMARY KEY CLUSTERED ( [OrderID] ) ON [PRIMARY] GO
ALTER TABLE [dbo].[Orders] WITH NOCHECK ADD CONSTRAINT [DF_Orders_Freight] DEFAULT (0) FOR [Freight]GO
CREATE INDEX [CustomerID] ON [dbo].[Orders]([CustomerID]) ON [PRIMARY]GO
CREATE INDEX [CustomersOrders] ON [dbo].[Orders]([CustomerID]) ON [PRIMARY]GO
CREATE INDEX [EmployeeID] ON [dbo].[Orders]([EmployeeID]) ON [PRIMARY]GO
CREATE INDEX [EmployeesOrders] ON [dbo].[Orders]([EmployeeID]) ON [PRIMARY]GO
CREATE INDEX [OrderDate] ON [dbo].[Orders]([OrderDate]) ON [PRIMARY]GO
CREATE INDEX [ShippedDate] ON [dbo].[Orders]([ShippedDate]) ON [PRIMARY]GO
CREATE INDEX [ShippersOrders] ON [dbo].[Orders]([ShipVia]) ON [PRIMARY]GO
CREATE INDEX [ShipPostalCode] ON [dbo].[Orders]([ShipPostalCode]) ON [PRIMARY]GO
ALTER TABLE [dbo].[Orders] ADD CONSTRAINT [FK_Orders_Customers] FOREIGN KEY ( [CustomerID] ) REFERENCES [dbo].[Customers] ( [CustomerID] ), CONSTRAINT [FK_Orders_Employees] FOREIGN KEY ( [EmployeeID] ) REFERENCES [dbo].[Employees] ( [EmployeeID] ), CONSTRAINT [FK_Orders_Shippers] FOREIGN KEY ( [ShipVia] ) REFERENCES [dbo].[Shippers] ( [ShipperID] )GO
HiI'm trying to access the properties of my datasource programatically so I can change the stored procedure it connects to depending on the value of a querystringIn my page load I have
Dim myMode = Request.Params("mode")Select Case myMode Case "Category" sqldatasource1.SelectCommand = "productsbycategory" sqldatasource1.SelectCommandType = SqlDataSourceCommandType.StoredProcedure ******'Need to add querystring parameter Case "Wishlist" sqldatasource1.SelectCommand = "productsbywishlist" sqldatasource1.SelectCommandType = SqlDataSourceCommandType.StoredProcedure ******'Need to add Session variable parameter Case Else sqldatasource1.SelectCommand = "allProducts" sqldatasource1.SelectCommandType = SqlDataSourceCommandType.StoredProcedureEnd SelectThe problem that I have is that I need to pass a parameter to the first 2 procedures above, a querystring to the first and a session variable to the second.How do I add parameters programaticallyMany thanks
Hi ,
Could anybody point me to an NT/DOS script ( e.g a batch file ) that could check if the MSSQL Server and SQL Server Agent Services are running ?
I am trying to write the following script to check for the status. Each of the following commands gives a 1 as output if the service is running and 0 if it is not. The problem I am facing is that I am not able to check the output after the command is executed. I am neither able to assign it to a variable or include the whole command in an IF statement.
net start | find /c /i "MSSQLServer"
net start | find /c /i "SQLServerAgent"
Is there any other way to do this programmatically ? Any help is greatly appreciated.
Thank You,
Srini
What is the best way to programatically stop/start SQL Server? I want to stop it to do backups and then restart it.
I was hoping to do it within SQL Agent but it depends on SQLServer so you can't do a restart.
Any help greatly appreciated.
Hi Guys,
I am trying to figure out a way to restore a database programatically. Here is how I do it now. Right click on the database, select Restore. Browse out to my computer and find the .BAK file. Select the database and go into 'Restore Options' I have to physically change the .MDF and .LOG paths since I am getting this backup is not coming from my computer. I select 'Overwrite the existing database' then click restore.
My problem is that I have to change the paths to the MDF and LOG files. How could I automate this? Thank you!!
use this-is-a-stupid-namereturns an errorFor that matterselect *from this-is-a-stupid-name.dbo.anytablereturns an errorI've tried single quoted, double quotes, escaping. In the SQL editor I canselect the name from the dropdown and I'm OK - but I'm writing a perlscript to connect to the database.I didn't create the database and don't know how it was created.--Message posted via http://www.sqlmonster.com
View 2 Replies View RelatedUsing Sql Srv 7I know I can use the system sp's sp_stored_procedures and sp_sproc_columnsto determine all the sps in a db, and what input parms there are for aparticular sp... but... if the sp returns a result set, is there a way tofind out the stru of that in a similar manner???
View 1 Replies View Related
Anybody know how to or if we can programatically insert a pagebreak. in a table. Yes, I know about the ones at group footer and header these arn't doing what I need.
vbwrangler@yahoo.com
Hi All,
I want to programatically deploy the report in VS2005 environment,ie.from an asp.net page if i click deploy report Button ,the report should be deployed into the report server automatically.So that i can view the report in report server.
the input to the asp page would be the.rdl file...
If anyone could help then it would be good.
thankyou.
Need to ask three questions regarding this component I am creating programatically:
1) How do you select "Modify the SQL statement" programatically.
2) How do you change the actual sql.
3) How do you add a parameter, also programatically.
I have manged to select "Enable memory restriction" by using
instance.SetComponentProperty("CacheType", 2);
but can't add a paramater and modify sql statement. Have used
instance.SetComponentProperty("SqlCommand", statement); and
instance.SetComponentProperty("SqlCommandParam", statement);
with no luck. Any ideas, have searched the web but found nothing.
Thanks.
Hi,
I am able to create a rdl file programatically.I want to deploy the RDL file programatically in Report Server.Any help is appreciated.
Thanks,
Prabu
Lets say you have to retrieve some SQL.Then you have to go through those records and delete some items, change some values, and even add columns and rows...based on logic that depends on the data you got.Thanks.
View 2 Replies View RelatedThis is my first attempt to create a Vb.net class as well as my first attempt to programmatically view SQL retrieved data as opposed to using the built-in data controls...so be gentle.My question is looking at the code below which I have already put together...how do I actually see what the data is in a particular column... One of my columns for example is the "Title" which contains the Page Title for Search Engine Optomization. I need to be able to read this value so I can assign it to the Page.'First Do a Database ConnectionIf Not Page.IsPostBack Then'Start by determining the connection string valueDim connString As String = _ConfigurationManager.ConnectionStrings("CMConnectionString").ConnectionString'Create a SqlConnection instanceUsing myConnection As New SqlConnection(connString)'Specify the SQL queryConst sql As String = "SELECT * FROM SEO where ParentType='Department' AND ParentLevel='0' "'Create a SqlCommand instanceDim myCommand As New SqlCommand(sql, myConnection)'Get back a DataSetDim myDataSet As New DataSet'Create a SqlDataAdapter instanceDim myAdapter As New SqlDataAdapter(myCommand)myAdapter.Fill(myDataSet, "SEO")'Create a DataViewDim myDataView As New DataViewmyDataView.Table = myDataSet.Tables("SEO")'Ok...this is where I'm lost. Now how do I look up the value for the column "Title" in this Dataset'Close the connectionmyConnection.Close()'End database connectionsEnd Using
View 6 Replies View RelatedCan anyone point me in the direction of code that will allow me to acce3ss the data held in an SQLDataSource.
The Control is link Selection Staement has been set at run, what I want to do is loop thru any data that is rertrieved, setting oter controls on the page depending on values
Thanks
Steve (I have not got much hair left, please help soon)
I use Visual Studio and VB.
If I want to create an SQL data table on the server, I go to Server
Explorer and make a small table with the corerct columns. Then I add
rows programatically as needed from the Application I'm working with.
It would suit me, for a current job, to be able to create the table itself programatically.
I don't know how to do this. Can it be done ? If so, could someone give
me a starter, please ? Four cols with a key in the first.
David Morley
I am crateing the database on the fly using db directory in VC++. I am able to create database. I am also able to create login. These can be easily done by logging as master using the username and password sa and "" resp. Now I want to add a user to the database that i created. but it is being added to the master database. I know that I have to change my login from sa ,"" to the username and password that i gave during login. but i dont know how to change the login. Please help. If you have any code for that then that will be of great help.
Hoping to get a positive response as soon as possible..
Thanx
Nitin Gulati
Does anyone know how to check when a distribution job has finished
distributing a snapshot programatically?
I am writing an app that adds subscribers programatically. It first add the subscription (which creates a new snapshot) and after the snapshot is done, the distributor gets invoked automatically. Because I need to access the subscriber database after the publication is pushed I need to wait until
the distributor has finished its work.
Any help would be greatly apreciated! Thanks.
Kurt
Hi
I've read the MSDN documentation about creating calculated members and states that we can only create session scope or query scope members.
I need to create a static calculated member, one that stays there until it's deletion... That is possibel using Analysis Services, but what about with MDX or DSO?
Thanks in advance
Hello Professionals, How can i attach and detach my mdf file to an instanse of sql 2005 programatically or by T-SQL
ElmasryA1