I wonder if anyone can help me -
I am trying to write a little application which recompiles any views dependent on a given view.
I have a script which will identify any views containing a given text string, but I now need a way to force SQL Server to refresh its cache info (or recompile) the views.
I have to admit that I am unclear on exactly how the caching works; i have tried using sp_recompile, but this does not seem to do the job.
Does anyone have any ideas?
Newbie here. I've only been using SQL for about a year now and have some minor questions about sql objects that reference other objects.
We have some views which reference other views in the joins. I will call one the primary view and the one being referenced in the joins as the secondary view.
Recently we made changes to the secondary view.
After which the primary views which referenced it would not work because of this change and had to be 'refreshed' by using drop/create scripts which essentially just dropped it and recreated the exact same view. I do not recall the exact error message that was returned other than it seemed to suggest that it could no longer see the secondary view since it had been changed. Nothing in the primary view was changed in any way, just the secondary.
Some here where I work have suggested off hand that this was a recompile of the primary view because the contents of the secondary changed.
My questions are:
1. Exactly why did this happen and is there a proper name for it when it does?
2. The same problem does not seem to occur when we have stored procedures referencing views in the joins which had just been changed. Why is that?
Thanks for any help on the matter. I greatly appreciate it.
Hello I have following data and environement is SQL Server 2000.
Hello
I have following data and environement is SQL Server 2000.
MemberID
Dependent_Empid
DependentName
Benefit
1
100
Kalim
100
2
100
Brian
100
3
100
Swadia
200
4
101
Allan
200
5
101
Cynthia
200
6
103
Noreen
200
7
103
Larry
300
8
103
Mike
300
and I am desired for the following output but I dont want to use function. Can anybody help me for script for the desired output. I will be much thankful.
Hello There,I'm trying to create a view that has calculations dependent oncalculations, where the problem resides is that each time I make acalculation I must create an intermediate view so I can reference aprevious calculation.for example lets say I have my_table that has columns a & b. now I wanta view that has a & b, c = a + b, and d = c + 1.this is grossly simplified, the calculations I actually use are fairlycomplex and copying / pasting them is out of the question.so what I have is my_view_a which makes column c, and my my_view_finalwhich makes column d (however, in my real application I have 5 of theseviews, a/b/c/d/e/)is there anyway I can consolidate all these views into one? I wasthinking of using a stored procedure with temp tables or somethingalong those lines.I just which I can use the aliases that I create for c in d in onestep.any insight would be greatly appreciated.
Hi Group,I have a database which has around 2000 SPs. I dont have relationshipsdefind in the database as its a maintainence project so now I want torecomiple each SP so to know that the SPs are in correct state. Oneway is to use sp_recomiple system stored procedure but it will onlyrecomiple the SP when the SP is called. I want the SPs to getrecompiled and report me errors in the SPs.I dont want to change the SP by WITH RECOMPILE option since that willalso mean changing all SPs. and every other option i found only workswhen the SP is called. I cannot write EXEC <SP NAME> since it meansproviding parameters for the SPs and its a very tidious task.Can anyone suggest me some easier way to do it ??Thanks in advanceSunil
hi all, i had a view in my project, i am inserting a record in to that view(View contains a identity key for a column), with in stored procedure i am inserting a record i am not passing the identity key value to the insert statement. The record is getting inserted,Based on the identity key(i am getting the identity key value with Scope_Identity()) and with that value i am inserting records into another two tables.In this scenario every thing is working fine. but now i am trying to place a trigger(instead of insert trigger) on the view, when i placed,it is not inserting record into first table,so i am not able to get the identity value of that record and process failed. how can this achived, let me know.
I am using the import/export wizard to import all the objects from one database into another.My problem is that any views that use User Defined Functions are failing because the view is being created before the UDF.I have searched for this error, and found the following microsoft article:http://support.microsoft.com/kb/300272/en-usThe article says that I should upgrade to the latest service pack. The problem with this is that I already have the latest service pack When I run the following:SELECT @@VersionI get:Microsoft SQL Server 2000 - 8.00.2039 (Intel X86) May 3 2005 23:18:38 Copyright (c) 1988-2003 Microsoft Corporation Standard Edition on Windows NT 5.0 (Build 2195: Service Pack 4) Could anyone please help me solve this problem.Jag
I am trying to write some admin only procedures which will collect information to one of my development server from other production and development servers.
I have created linked servers to access these other servers on the development server. This development server is SQL Server 2000 EE. Other servers which I want to access are 2000 and 2005 (vaious editions)
E.g I have another development server called PRODTEST which is SQL Server 2005 and on the development server I have created a linked server pointing to PRODTEST called TESTLINKSRV. I want to access new object catalog view (as I do not want to use sysobjects)
When I run the following query
SELECT * FROM [TESTLINKSRV].[DBNAME].[sys].[objects]
I get following error,
OLE DB error trace [Non-interface error: OLE DB provider does not contain the table: ProviderName=' TESTLINKSRV ', TableName='" DBNAME "."sys"."objects"'].
Msg 7314, Level 16, State 1, Line 1
OLE DB provider ' TESTLINKSRV ' does not contain table '"DBNAME"."sys"."objects"'. The table either does not exist or the current user does not have permissions on that table.
So I try this query
SELECT * FROM [TESTLINKSRV].[DBNAME].[sys.objects]
and I get following error
Msg 208, Level 16, State 1, Line 1
Invalid object name TESTLINKSRV.DBNAME.sys.objects'.
So bottom line is how do I access catalog views on a 2005 server from a 2000 server using linked server?
I hope someone understands what I am trying to achieve. Please let me know what is it that I am doing wrong. Thank you
I have a simple stored procedure that is recompiling over and over. Ihave run several traces and I can't figure out the problem. Here isthe code:CREATE procedure dbo.Sp_multi_selectEmployee(@EmployeeID int)Asselect EmployeeID, UserName, FirstName, LastName, DealerID, Password,tbldealeremployees.UserTypeID,tblEmpUserTypes.Name as UserRole, DateCreated, DateLastModified,Customized, Active, CustRoleName,Address, Address2, SSN, EmailAddress, City, State, Zip, Country,OwnerFlag, JobTitle, JobDescfrom dbo.tblDealerEmployees inner join dbo.tblEmpUserTypeson dbo.tblDealerEmployees.usertypeid = dbo.tblEmpUserTypes.usertypeidwhere EmployeeID = @EmployeeIDThe traces report an event sub-class of 1, which according to msdn is"Schema, bindings, or permissions changed between compileor execute." I don't see how the permissions orbindings have changed. I have seen a few similar posts but noanswers. I tried dropping all of the indexes on both tables but thathad no effect. I can replicate this in our development environment,so it seems something specific to the code. Any answers, ideas?thanks.
Hello I have an issue that a job which executes a stored procs fails with a string truncation error but suceeds if I run the same proc WITH RECOPILE option. This happens only at 12 a.m. daily.But during all other executions it runs fine.
I have two procedures Sp1 and Sp2. The Sp1 is calling from Sp2. If there come new parameters or removed from the first procedure Sp1 then it will effect the Sp2 and its execution will break if required changes not done. So I want that when any changes making in SP1 then i need alert about the Sp2 changes.
Lalitha writes "Can I use DML statements against indexed views? If yes how it works internally, means will the pages gets locked during update and inserts and when the base tables get reflected of these modified data?"
Recently we upgraded our server from SQL 7.0 to SQL 2000. I created anew view in Enterprise Manager which pulls data from a linked server'sdatabase. When I write the view...CREATE VIEW dbo.VIEW1ASSELECT *FROM LinkedServerName.DatabaseName.dbo.TableNameand I click on the run button it changes to:CREATE VIEW dbo.VIEW1ASSELECT *From LinkedServerName.DatabaseName.dbo.TableName TableName_1I can still see the correct results, but the users can't- Once Iremove the TableName_1 they can see the results.When I tried creating a view and did not use a linked server,everything worked fine. Anyone have any answers?
Fellow database developers,I would like to draw on your experience with views. I have a databasethat includes many views. Sometimes, views contains other views, andthose views in turn may contain views. In fact, I have some views inmy database that are a product of nested views of up to 6 levels deep!The reason we did this was.1. Object-oriented in nature. Makes it easy to work with them.2. Changing an underlying view (adding new fields, removing etc),automatically the higher up views inherit this new information. Thismake maintenance very easy.3. These nested views are only ever used for the reporting side of ourapplication, not for the day-to-day database use by the application.We use Crystal Reports and Crystal is smart enough (can't believe Ijust said that about Crystal) to only pull back the fields that arebeing accessed by the report. In other words, Crystal will issue aSelect field1, field2, field3 from ReportingView Where .... eventhough "ReportingView" contains a long list of fields.Problems I can see.1. Parent views generally use "Select * From childview". This meansthat we have to execute a "sp_refreshview" command against all viewswhenever child views are altered.2. Parent views return a lot of information that isn't necessarilyused.3. Makes it harder to track down exactly where the information iscoming from. You have to drill right through to the child view to seethe raw table joins etc.Does anyone have any comments on this database design? I would love tohear your opinions and tales from the trenches.Best regards,Rod.
I have a ABC service on a server1 that is dependent on MSSQLSERVER service running on server2. Does anyone know how to setup the service ABC on server1 to have a dependancy on MSSQLSERVER running on server2?
I am trying to query only the Max date dependant on quantity
Create Table dbo.TestParts (Part char(30), Desc1 char(50), Desc2 char(50)); Create Table dbo.TestStructure (Model char(30), Part char(30), EDATE smalldatetime, QtyPer float); GO Insert INTO dbo.TestParts Values('101111','Widget A', 'Batteries Not Included'),
[Code] ....
Looking for a return of:
PART Description EDATE QtyPer 101112 Widget B ..... 2012-12-03 3 101113 Widget C ..... 2012-12-03 5 101114 Widget D ..... 2012-12-01 1
Widget A should not show because the last date the qty was changed to Zero
Closest that I have come..........(which is pulling the part 101111 which should be incorrect)
Select ts.Part, RTRIM(tp.Desc1) + ' ' + RTRIM(tp.Desc2) as Description, ts.EDATE, ts.QtyPer FROM testing.dbo.TestStructure ts Inner Join (Select Part,MAX(EDATE) as Date FROM testing.dbo.TestStructure WHERE QTYPER <> '0'
SELECT INVENTORY_ITEM_TAB.ITEM_NO, INVENTORY_ITEM_TAB.DESCR, INVENTORY_ITEM_TAB.STATUS_FLG, INVENTORY_ITEM_TAB.PRICINGUOM, INVENTORY_ITEM_TAB.PURCHUOM, INVENTORY_ITEM_TAB.ITEM_CATEGORY, INVENTORY_ITEM_TAB.ICINTERNALNOTES, INVENTORY_WHS.QTY_ON_HAND, INVENTORY_WHS.QTY_ON_ORDER, INVENTORY_WHS.QTY_ALLOCATED FROM INVENTORY_ITEM_TAB INNER JOIN INVENTORY_WHS ON INVENTORY_ITEM_TAB.ITEM_NO = INVENTORY_WHS.ICWHSPCODE WHERE (INVENTORY_ITEM_TAB.ITEM_CATEGORY = 'SS') AND QTY_ALLOCATED, QTY_ON_HAND, Qty_On_ORDER <> 0 ORDER BY INVENTORY_ITEM_TAB.DESCR
But I don't want to select records if all of these fields have a 0 in them - QTY_ALLOCATED and QTY_ON_HAND and QTY_ON_ORDER.
how to do this type of query. If any of those fields doesn't have a 0 then I would want to return it. I just don't want them if all three of those fields have 0.
Suppose I have the following table:col1 col2hammet jonesjlo afflectafflect armandwills snoptarmand hammetjones smithIf someone choses armand, then I'd like to returnamand hammet jones smithThe first selection goes over to the second column, gets that valueand locates it back in column one and returns column 2 and so on.One way of doing it is to set up a separate query for each one andthen construct a new query to get them all.I'm thinking there's a more elegant way to do this. Any suggestionswould be appreciated.-David
I was just analysing the security which can be given to different users to access respective databases. So i tried, on my local server, to deny permission to myself to access Model database. After this i am not able to connect to my local server at all. Error: Permission denied. I am using windows authentication mode.
I have also deleted the local server registration, and re-registered it, but still the condition is same. Do i need to uninstall SQL Server completly to get rid of this prob.? I also registered a new data server, and there every thing is going fine. So now what do i do to get connected to my local server.
I have a report which uses a parameter called "Interval" with possible string values of "Daily", "Weekly", and "Monthly" and I want these values to set the default values for my StartDate and EndDate parameters. However, the default value remains static. And I have tried all of the solutions found in this forum. Any suggestions?
I am using SSRS 2005. And I have tried using an iif statement for StartDate, also tried Property->Custom Code, and also tried using stored procedure to populate Start and End Dates, but none of these provide dynamic parameter setting like I was hoping for.
And I think this should work because I know that if it is not a date that it works correctly. For example if I have one parameter called country and a subsequent one named state, every time I change the country it will let me re-pick the state. But this is not working correctly here.
Any ideas on what I am doing wrong or how to fix this?
I am not able to delete a row due to the presence of its parent table. There is no circular relationship and the child has no dependencies when I verify the Delete trigger. Any advice? See error msg below:
Msg 30010, Level 16, State 1, Procedure tD_My_child_table_name, Line 43
Cannot DELETE last My_child_table_name CI because My_parent_table_name exists.
Msg 3609, Level 16, State 1, Line 1
The transaction ended in the trigger. The batch has been aborted.
I'd need to generate multiple recordsets within a MS SQL stored procedure. The thing is these recordsets depend on each previous one (the first one obviously has parameters). How can I make this work? I can't create views with SPs. Thank you very, very much.
I want to execute multiple SQL Server scheduled jobs using OSQL, but I only want to execute a job if the previous job completed. Is this possible? So far I am unable to prevent all jobs from starting before any have completed.
We have an interesting performance issue with a distributed query. When run by a system-administrator account, the remote computer returns the requested row set. It does the same thing for small row counts (<=7) for user accounts. On larger row counts, however, the user account returns the ENTIRE rowset from the remote table, and performs the restrict operation locally. Performance-wise, this results in a difference between 11 seconds and 12 MINUTES. I'm assuming it's some sort of security issue in DTC, but the remote server is on Windows Server 2000, and there's no security button for DTC under Component Services.
Suggestions?
The query in question is: EXEC ("INSERT INTO #XML (vin, ws_xml, lang_id) SELECT slo.vin, br.xml, br.lang_id FROM #SALE_LINEUP_ORDER slo INNER JOIN RemoteServer.mydatabase.dbo.build_record br ON slo.vin = br.vin INNER JOIN #LANGUAGE_IDS li ON br.lang_id = li.lang_id")
Excuse my illiteracy in this subject, I just learned about this yesterday, I managed to create a report by using business intelligence report wizard, and when I preview it seems that I can view the fields that I wanted to view.
But in addition to that I also want to add hyperlinks to some of the fields, because I am planning to embed the whole report in a web page. For example if I go on the field that I want to add hyperlink and right click->properties->navigation tab->Jump to url, I thought that I can handle it. Actuall it works fine if I link it to http://www.microsoft.com but let's assum e the name of the field is ID, and you want to link to http://somewebsite/somepage.aspx?id= (id in that cell), how can I achieve this parametric behavior, actually I tried right click cell->properties->navigation tab->Jump to url, and filled url text box http://somewebsite/somepage.aspx?id=&(concatenation operator)=Fields!ID.Value but what happens is instead of evaluating the value of ID field, it takes expression as text as text and that's why it links to totally wrong url. Is there a way to get around this problem.
And can somebody suggest me a detailed tutorial on programmatically using reports in .net web applications using c#.
Greetings all: I am looking for a way to get detailed information about each created table (regardless of permanancy) in a stored procedure, similar to the information one received from using sp_help on an individual table.
Does anyone know of such an animal?
Thank you, and Happiest of New Years, Jack Cole Magellan Healthcare, Inc.
I have a table with one row for each test a user has taken, with columns for userid, score, and test date. I have a query that gets the highest score and the date of the latest test for each user. Easy. But how can I also get the score achieved on the latest test for each agent?
Thanks, John
(By the way, I've been looking for a good SQL mailing list to ask this question and have been unsuccessful. If there's a better forum than this for this type of question, please let me know).
Hi,DDL:-- create table #task (taskID int identity(1,1) primary key, taskNamevarchar(25) unique, taskCompleteDate dateTime, taskComplete bitdefault(0));/*Business Rules:a) if taskCompleteDate is NULL (like default) then, taskComplete maynot be set to 1 (attempt to update it to 1 would fail);b) else automatically set taskComplete = 1*/I was thinking using CHECK constraint (mutual constraint if possible),along the following line:CHECK (if taskCompleteDate is null set taskComplete=0 else settaskComplete=1)Hmm, your thought?Thanks.
I have a data mining model that has a binary dependent variable (let's say 'Yes' and 'No'). I noticed that the model is very sensitive to the distribution of the binary dependent variable. I could not come up with an explaination. I know the model is not over/under fits and multicollinearity is not an issue. And I have enough data size to train the model.
I would expect some sensitivity but not to this extend:
Yes % in training data Yes % in the prediction results
with DT with LR with NN
30.0% 6.0% 11.0% 14.0%
35.0% 12.0% 15.0% 24.0%
37.5% 20.0% 23.0% 27.0%
40.0% 28.0% 33.0% 36.0%
50.0% 43.0% 52.0% 61.0%
DT - Decision Trees
LR - Logistic Regression
NN - Neural Networks
And to make things more interesting, although the precision (% of correct 'Yes's ), true positive ratio and false positive ratio is changing; the overall accuracy (and therefore the score in the mining accuracy chart) remains almost same.
If anyone has an idea it would be highly appreciated.
