Recovery :: Server Cluster Resource Fails To Come Online And Pending Online State
Nov 3, 2015
We have SQL cluster installed on top of windows cluster on VM environment. Node1 and Node2 under Windows Failover Cluster. SQL instance is currently on node2 the instance is up and running, but SQL Cluster service remains online pending and it restarts the instance on every 5 minutes.
SQL Browser service are running successfully.TCP/IP ports are enabled and configured.If we start the SQL server agent it is on for seconds and stopped immediately  .Cluster Service is attempt to connect to the SQL service every few minutes (setting in SQL cluster resource) for the IsAlive check, if this fails then the SQL resource is restarted even if the instance was online. Hope this is what happening exactly.
[sqsrvres] ODBC Error: [08001] [Microsoft][SQL Server Native Client 11.0]SQL Server Network Interfaces: Error Locating Server/Instance Specified [xFFFFFFFF]. (268435455)
00001024.00053314::2015/10/30-19:57:50.772 ERRÂ Â [RES] SQL Server <SQL Server (SIMAH_COMMDB)>: [sqsrvres] ODBC Error: [HYT00] [Microsoft][SQL Server Native Client 11.0]Login timeout expired (0)
00001024.00053314::2015/10/30-19:57:50.772 ERRÂ Â [RES] SQL Server <SQL Server (SIMAH_COMMDB)>: [sqsrvres] ODBC Error: [08001] [Microsoft][SQL Server
Native Client 11.0]A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information see SQL Server Books
Online. (268435455)
00001024.00053314::2015/10/30-19:57:50.772 INFOÂ [RES] SQL Server <SQL Server (SIMAH_COMMDB)>: [sqsrvres] Could not connect to SQL Server (rc -1
View 5 Replies
ADVERTISEMENT
Nov 12, 2015
I am trying to install fail over cluster for SQL and getting the below error message  :
I am using domain admin account to do the installationÂ
View 5 Replies
View Related
Oct 19, 2010
Server : Windows server 2008
DB Server : SQL Server 2008 (SP1)
Â
Here are the series of events which happened.
1.) Event ID: 1135
Cluster node 'XYZ' was removed from the active failover cluster membership. The Cluster service on this node may have stopped. This could also be due to the node having lost communication with other active nodes in the failover cluster. Run the Validate a Configuration wizard to check your network configuration. If the condition persists, check for hardware or software errors related to the network adapters on this node. Also check for failures in any other network components to which the node is connected such as hubs, switches, or bridges.
2.) Event ID: 1049
Cluster IP address resource 'SQL IP Address 1 (XYZ)' cannot be brought online because a duplicate IP address '10.9.8.113' was detected on the network. Â Please ensure all IP addresses are unique.
3.) Event ID: 1069
Cluster resource 'SQL IP Address 1 (XYZ)' in clustered service or application 'SQL Server (MSSQLSERVER)' failed.
4.) Event ID: 1049
Cluster IP address resource 'Cluster IP Address' cannot be brought online because a duplicate IP address '10.9.8.112' was detected on the network. Â Please ensure all IP addresses are unique.
5.) Event ID: 1069
Cluster resource 'Cluster IP Address' in clustered service or application 'Cluster Group' failed.
6.) Event ID: 1066
Cluster disk resource 'Cluster Disk 25' indicates corruption for volume '?Volume{88552e6f-aea2-11df-9790-0026b92fffa7}'. Chkdsk is being run to repair problems. The disk will be unavailable until Chkdsk completes. Chkdsk output will be logged to file 'C:WindowsClusterReportsChkDsk_ResCluster Disk 25_Disk16Part1.log'. Chkdsk may also write information to the Application Event Log.
7.) Event ID : 1066
Cluster disk resource 'Cluster Disk 26' indicates corruption for volume '?Volume{88552e05-aea2-11df-9790-0026b92fffa7}'. Chkdsk is being run to repair problems. The disk will be unavailable until Chkdsk completes. Chkdsk
output will be logged to file 'C:WindowsClusterReportsChkDsk_ResCluster Disk 26_Disk4Part1.log'. Chkdsk may also write information to the Application Event Log.
8.)Â Event ID: 1049
 (Same message as point 2)
9.)Â Event ID: 1069
    (Same message as point 3)
10.) Event ID : 1049
(same message as point 4)
11.) Event ID :1069Â
(same message as point 5)
12.) Event ID :1205
The Cluster service failed to bring clustered service or application 'Cluster Group' completely online or offline. One or more resources may be in a failed state. This may impact the availability of the clustered service or application.
13.) Event ID: 1069
Cluster resource 'Cluster Disk 17' in clustered service or application 'SQL Server (MSSQLSERVER)' failed.
14.) Event D : 1049
(same message as point 2)
15.) Event ID: 1069
Cluster resource 'SQL IP Address 1 (XYZ)' in clustered service or application 'SQL Server (MSSQLSERVER)' failed.
16.) Event ID : 1205
 The Cluster service failed to bring clustered service or application 'SQL Server (MSSQLSERVER)' completely online or offline. One or more resources may be in a failed state. This may impact the availability of the clustered service or application.
Â
first of all,I went through all the logs, and could not find the reason for fail-over initialization. There should be some thing logged why the failover happened? secondly after failover the service was not coming online due to duplicate IP address detection.
Later when we try  to manually bring the service online from cluster management it comes online successfully. I don't understand how would duplicate IP address get resolved when we start manually.
Lastly we see few errors related to physical disk resource between failover retries, is this could be the correlated to failover error ?
View 4 Replies
View Related
Feb 27, 2013
I installed a SQL server 2008 R2 on a 64 bit Stand alone system today morning
Now I am trying to apply SP1 on it. But it is not progressing further with the below. How to overcome this issue.
Note: Cluster services not installed on this server. Cluster service is not there in the services.msc as well.
View 10 Replies
View Related
Dec 29, 2007
I am expirincing an issue that should have been corrected in SP2. When following the steps to enable DTC on my Windows 2003 SP2 Cluster, I get the following error in the event log:
Event Type: Error
Event Source: MSDTC
Event Category: Cluster
Event ID: 4394
Date: 12/28/2007
Time: 11:30:03 PM
User: N/A
Computer: NODE1
Description:
MS DTC's log information has not been configured correctly in the shared cluster registry. Error Specifics: d:tcomcomplusdtcsharedmtxclumtxclusetuphelper.cpp:557, Pid: 3652, CmdLine: C:WINDOWSsystem32msdtc.exe
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 05 40 00 80 .@.€
I have tried re-applying SP2 but it does not fix the issue. Does anyone have any idea how to fix this?
Below is the environment:
NODE1: Windows 2003 Enterprise Edition, SP2, 512MB RAM
NODE2: Windows 2003 Enterprise Edition, SP2, 512MB RAM
Both servers are hosted on Virtual Server 2005 R2
Share resources in the cluster are:
Quorum Disk is "Q:"
MSDTC Disk is "T:"
SQL Dist is "S:"
View 1 Replies
View Related
Jul 18, 2007
Hi, here is my problem
I am trying to conncet to an SQL Server that is on the net. The name of the server looks like : sqlServer.TheCompanyOwingIt.Com and it listens to port 2433
I am opening enterprise manager and trying to connect ,giving the name of the server and the credentials but no luck. I also tried opening hte client Network utility , created an alias for that server, specifying 2433 as the port but no luck again. Finally i tried to change the port of my sql server to be 2433 (instead of 1433), no luck again !!! Any ideas ? (there is no firewall running on the PC, but there is a router which might (?) cause the problem ? (i tried to port forward 2433 , but i am not sure if i did it correctly).
Any ideas, suggestions will be greatly appreciated
Thx in advance
Theodore
View 5 Replies
View Related
Jun 5, 2006
HiI am trying to connect an application to a remote sql server database, however it does not appear to eb configured for remote connections. Does anyone know a connection string of a database I can connect to , soem sort of learnsers database sort of idea ?Thank you.
View 1 Replies
View Related
Mar 23, 2007
Hello,I am trying to develop a database solution for an organisation inIndonesia.This organization has a number of offices and users throughout thecountry. They all need to maintain their own data, but I also need tocreate a central database, to store all of the data, and share databetween the individual users. The problem is that the internetconnections are not reliable, so a online solution isn't possible. Iam planning to implement stand alone databases in Access, which "sync"with the central server. This sync could happen automatically (maybedaily), or could be initiated by the user. This Sync would/could takeplace when the internet connection is working.I am very familiar with Access, but I suspect that I will need to useSQL Server for the central database. I have not used SQL Serverbefore, and have a few questions:Is it possible to host a SQL Server, so that it is "Online"? What do Ineed to do for this? Does this need to be hosted by an ISP, or couldit been hosted on a computer in our office? What are the securityconsiderations?Is it then possible to connect to this SQL Server from the Accessdatabases in the various locations to "Sync" the data? If I could runSQL statements from the stand alone databases which could access theonline SQL Server I could write the code for the Sync procedure. Thebit that I am unsure of is how to connect to the SQL Server?Could anyone point me in the right direction? Examples? References?What sort of technology to use?I know VB and how to write SQL statements, it's just the connectivitythat I am unsure of.Thanks in advance.CheersMichael
View 1 Replies
View Related
Dec 1, 2007
are a mess, reminiscent of the structurless "goto" programming of days past. One of you brainiacs need to erect a "real" getting started section, with procedural steps on how a first time user can successfully download, install, and use SQL Server Express. Not all of us are working in corporations where the guy in the next cubicle can answer questions for newbies.
I will try once again, nicely, to ask a question about installing SQL Server Express Edition SP2 onto a Windows Vista machine. That drama will take place in another post.
View 1 Replies
View Related
Oct 11, 2006
Hi there, i would please like to know how to get a database online in T-SQL, I managed to get it offline in T-SQL, but know I can't get the database back online.
Please help.
If someone can please help me with the T-SQL command.
Or direct me to a link where I can get more information.
Thanks
View 5 Replies
View Related
Mar 28, 2008
Hi All,
I have MS Access 97 database and SQL Server 2005 Express Edition (or SQL Server 2005 Developer Edition).
I want online get data from MS Access and upload to SQL Server.
Help me, which way I select ?
Regards
View 3 Replies
View Related
Jun 12, 2015
I have a DB shown as recovery pending when running the following:
SELECT Name, state_desc
FROM sys.databases;
The DB was created by someone outside of our team using the Full Recovery model & I can see that no transaction log backups have been taken for this, causing the log to growth to a large size.
The MDF is only 5,120kb but the TRN has grown to 10,773,120kb
When I checked the Server I could see the data area had run out of space so I have freed up some space for this so now have 2.5gb available as a short term solution.
The MDF & LDF files are still visible & when checking the SQL log the DB is being reported as having a Full Transaction Log.
Essentially I want to change the Recovery Model from Full to Simple, Reduce the size of the transaction log & bring the DB back online. Luckily this DB is only used by a handful of users but I still need to get it up & running asap.
View 9 Replies
View Related
Sep 22, 2006
Hello,I am working with VS2005pro and sql server 2005 (tables, SP). Nothing online yet but it should be soon for tests, and it will be for me the first time with sql server...I have a very basic question about the way we can keep on adding tables, stored procedures... when the application is already online.I'll try to explain: once online my users will enter data in the database (good point!). But on my side I have to keep on developing new features (new tables, new stored procedures...) and why not add new rows in tables, and I would like to add them to this database on the server once I have finished my development.So what's the best way to work ? Do I need to work online directly on my .mdf database (which I wouldn't like to do) ? Or do I keep on developing on my own computer, on a development database, and then is there a way to update/synchronize with the database on the server in order to add the newly created tables and SP ?Thank for you help.
View 1 Replies
View Related
Jul 16, 2007
Could some body suggest some good books and online resources for:
1. T-SQL Intermediate level/Advanced
2. SQL Server 2005
Thanks a bunch
Csharplearner
View 1 Replies
View Related
Mar 7, 2006
i am new to sql. plz let me know from where can i get free book to study sql server 2000.
View 3 Replies
View Related
Feb 18, 2008
Hi,I was wondering if someone could help advise me.Basically i have a client who wants to upgrade from a desktop msaccess solution to a web based system using MS SQL Server 2005.Basically their main concern is in losing the ability to write ad-hocqueries using the MS Access query manager. I can obviously writestatic reports etc but whats the best way to give them someflexibility ??Can anyone advise me if there is any product that can do this for SQLServer 2005 (which im sure there is) but will work in a webenvironment.Or does anyone have any helpful ideas ???all help / advice greatly appreciatedCG
View 1 Replies
View Related
May 3, 2008
I am trying to install sql server 2005 books online but I am failing and I am getting this message
"This installation pakage could not be opened.Contact the application vendor to verify that this is a valid windows installer package"
am I doing anything wrong or has the version of books online changed? Do I have to install anything else before installing it? or does my operating system not support it?
Thanks
View 4 Replies
View Related
Nov 6, 2007
I downloaded and tried to install the file "SqlServer2K5_BOL_May2007.msi" and got a message:
"This installation package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer package."
Please advise.
View 3 Replies
View Related
Oct 23, 2007
Can some one give me detail instruction to installing the SQL Server 2005 Express Books Online.
I am new to SQL Server and want to install the MS training material.
View 3 Replies
View Related
Sep 18, 2006
I'm not experienced with SQL Server 2005.I've got a live copy of my database running on the web server.I've got another copy running on my desktop that I make changes to.Whats the best way to sync between the two so:1. I don't have to take the application offline2. I don't loose any data from the live database3. But I can implement changes to tables and/or add new tables
View 1 Replies
View Related
Oct 27, 2005
my freind asked me to look for him for online book or something very good that teach SQL for SQL server 2000 ... what i need is something like hands on examples that will take user from level 1 to level * .... i have seen alot of stuff in google but i think some of you might know what i need and can direct me to better resources as i could not find someting specail !!!
View 2 Replies
View Related
Jul 20, 2005
Hi,I have been trying to download the latest update to SQL Server BOL forquite some time without any success. I have tried downloading around3-4 times. Every time (size of msi file would be around 25 KB) I try toextract the msi file, I get an error message to the effect that 'it isnot a valid windows installer package'. Has anyone come across thisproblem?Have been trying to download from this URL -http://www.microsoft.com/downloads/...A6F79CB1-A420-445F-8A4B-BD77A7DA194B&displaylang=enThanks,Harish*********************************Long way to go before I sleep ..*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies
View Related
Jun 9, 2006
If you take a database offline to prevent users from accessing it, and then restart the server, will the database be back online when the server starts up?
If so, is there an option to prevent this from happening so that a database taken offline will remain offline until it is manually put online again by an administrator?
View 1 Replies
View Related
Jun 21, 2001
Does anyone know how to do this? I am in the middle of writing a server side program, and this is one thing that I cannot do without.
Also, if anyone can answer that, how do I do the same with an Exchange 5.5 Email account?
Thanks ahead of time!
Cash Coleman
View 1 Replies
View Related
Mar 1, 2015
When you load the data into a new partition table, can it to done online without any downtime? because I have few tables that are around 250 gigs and more.
View 5 Replies
View Related
Sep 30, 2007
Hi,
We have unreliable circuits connecting our office to remote sql servers. At our office I need to delete/insert a bunch of records from those remote locations. Since the connection is unreliable what is the best way to check if a server is available before executing delete/insert statements. A few points to consider:
1. I want this to be done in SQL
2. I have a cursor that cycles through a tabe that contains the name of the linked servers. The cursure is used to delete/insert a bunch of records from each remote server.
3. If one server is unavailable the stored proc should continue to the next sql server (next record in the cursor.)
Thanks,
Bradley
View 3 Replies
View Related
Jun 3, 2015
SQL server, by-mistake I updated values of a column in a database hosted online, is there any way undo the transaction. I didn't created any backup of the database. I read that still it can be recovered through the .ldf (log file) but unable to access it. Is there anyway to get access of the Log file or is there any way to recover the data.
View 1 Replies
View Related
Oct 12, 2006
Does anyone have any great suggestions on how I can import an online XML file into an SQL 2005 table?
So far I tried to accomplish it with SSIS Data Flow Task where my source is XML Source (Data access mode: XML file location; XML location: URL, Use inline schema = True). This set up properly identified the columns to be imported.
I used Copy Column data flow transformation task to load data to OLE DB destination table that has same structure.
When I run the task it does execute with no errors, however the table remains empty. It looks like I am failing to read the actual data.
Do you have any suggestions? I am willing to go around this approach with stored procs/com/you name it €“ just make it work!
Thanks a lot for your help!
LoveDanger
View 6 Replies
View Related
Mar 7, 2006
Hi All, first post.
I have done a bit of searching around and cant find a clear answer to this question.
Current Setup
Desktop application (c#) that connects to a SQL Server 2005 express database on the same local network as the application (currently 3 users)
It is only a very small company and has just taken on their first remote worker, but expects to take on another 6-8 over the next few months. They have asked for the database to be moved online.
The application was written in such a way that everything has been done using no stored procs, or views, it is all native SQL.
This will be my first DB hosted online and before I go ahead and do anything I just wanted to make sure what I have to do is correct, sorry if this is a very basic question, although I have been programming for a long time, I have never had the chance to do any online databases before.
Will this work.
1.Find a SQL Server 2005 Hosting company.
2.Move the database to the server.
3.Setup the users permissions.
3.Alter the connection string in the application to point to the new location.
So the only thing that would change would be a new connection string in the application preferences?
Or am I living in a dream world, because nothing is ever that simple.
One thing I am worried about is the security/visiblity of the database and data as it travels from the server to the client and back.
Thanks for any advise you can give.
Mark
View 2 Replies
View Related
Sep 12, 2015
We have 2 switch between primary and secondary this morning.
after that one database in secondary went to "initializing / recovery pending".
How can i exit from this situation ?
View 3 Replies
View Related
Aug 17, 2015
We have a requirement to build SQL environment which will give us local high availability and disaster recovery to second site. We have two sites- Site A & Site B. We are planning to have two nodes at Site A and 2 nodes at Site B. All four nodes will be part of same Windows failover cluster. We will build two SQL Cluster, InstanceA will be clustered between the nodes at Site A Server and InstanceB will be clustered between the nodes at Site B, we will enable Always On Between the InstanceA and InstanceB and will be primary owner where data will be written on InstanceA and will be replicated to InstaceB. URL....Now we want we will have instanceC on the Site B and data will be writen from the application available on Site B, will be replicated to the instance on the Site A as replica.
View 6 Replies
View Related
Mar 16, 2006
Hi
I have made a small mistake while restoring the DB I selected the 3rd option in the em
Leave the DB read-only and able to restore additional transactional logs
I have just realized that all I have is a complete back up to restore & no transaction logss...
I see the Db in a Read-only state & when I try to get it online It says
Error 5063 : Db is a warm standby. A warm standby db is read-only
Alter DB statement failed.
sp_dboption command failed
Please Help
View 5 Replies
View Related
Jan 8, 2008
I know MMORPGs take tons of special servers, but what about a simple 2D minorly-multiplayer online game, say with 3-5 players- could that be run through an SQL database or is it still too slow?
View 2 Replies
View Related
