I have created some tables and relationships between them by using MS SQL Server Management Studio Express.
The relationships are between a field named OId, which is not a part of the primary key but it is typed as an unique key. And a field named ParentTableOId.
When I open the two tables that have this relationship in the "Design Query in Editor" is not the relationship there.
Anybody who knows why?
I have created some tables and relationships between them by using MS SQL Server Management Studio Express. The relationships are between a field named OId, which is not a part of the primary key but it is typed as an unique key. And a field named ParentTableOId.
When I open the two tables that have this relationship in the "Design Query in Editor" is not the relationship there. Anybody who knows why?
I have several reports that use parameters that I have defined as multi-value. When I am designing the reports I see the "(Select All)" option listed first in each parm control that has the multi-value property set true. However, when the same reports are deployed to our server and viewed through Report Manager, the "(Select All)" option is missing. I need the "(Select All)" to be present.
I've seen some discussion of a service pack. Could this be the problem? What do we need to do to get our "(Select All)" back?
I have created two tables and receive a "columns in table ... do not match an existing primary key or UNIQUE constraint." error message.
Table1: GOSMapping
PK: AuthInd (bigint)
PK: GLCode (nchar(8))
-both columns were set as PK simultaneously
Table2: GOSTracking
PK: AdjID
FK: AuthInd (bigint)
FK: GLCode (nchar(8))
I open Table2 in the designer and right click, then select Relationships. I choose both of the columns that are the PK in Table1, and set the exact fields as the FK in Table2. I get the message when trying to save this relationship. All data types are congruent, and the primary key has been set as the combination of the two PK columns in Table1. Any ideas?
As SQL Server 2016 category is not created so I am posting this query in SQL Server 2014 window.
I have enabled Query Store in SQL Server 2016 using ALTER DATABASE and later tried with Properties of Database too. But I am not able to see the Query Store subfolder under database.
I am in the process of develping a MSRS report using an MSAS 2005 OLAP cube as my data source. In the MSRS Query Builder, I am using an MDX query which successfully executes in Management Studio. Something like the following:
SELECT
NON EMPTY { [Measures].[Fact Count] } ON COLUMNS, NON EMPTY{ ( [Dim Attribute].[Hierarchy Not Visible].ALLMEMBERS) } DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS FROM [MyCube]
The twist is that the AttributeHierarchyVisible property of the [Dim Attribute].[Hierarchy Not Visible] is set to False.
As mentioned previously, the query successfully executes in Management Studio. However when it is executed in the MSRS Query Builder, the following error message is displayed:
The query cannot be prepared: The query must have at least one axis. The first axis of the query should not have multiple hierarchies, nor should it reference any dimension other than the Measures dimension.. Parameter name: mdx (MDXQueryGenerator)
Is there a way to successfully query dimension attributes whose hierarchies are not visible?
I am trying to run queries against any of the user tables in my MS SQL 7.0 database. I get a message the Query Designer encountered a query error. We have tried rebooting the SQL Server and I am still getting these messages. Also, the SQL error logs look fine - all database maintenance are running successfully including the DBCCs which show no errors. Any help would be greatly appreciated as we are to go into production in a few days.
I have a table with several foreign key relationships. I am scripting with PHP and was wondering if anyone knows how to query the database to show the relationships that a table has. I have been using MySQL, but for a number of projects have to use MS SQL.
We have 1000s of SSRS reports hosted on the SQL 2008 R2. All reports are supposed to have all parameters "hidden". Random reports have been reported to expose the parameter when developers accidently deploy to test servers. Is there a way to identify the reports and the parameter property (Hidden, Visible, Internal) from the Report server Database?
I checked executionlog2 but can not find the parameter property.
Greetings, I'm trying to come up with a way (efficiency isn't the most important thing here) ..to show how a person is related to another person on my website. The table structure is like so (simplified) ID | UserName| FriendName 1 | Danny | Mike2 | Mike | Danny3 | Steve | Jason4 | Jason | Steve5 | Steve Danny6 | Danny | Steve There are 2 rows each for every 'relationship' - I chose this design to simplify queries like "give me all of danny's friends" etc. With this stucture, I want to be able to display to a user how they are "related" to someone that they may not necessarily be friends with. For example, lets say you are logged in as "Jason" and you are looking at "Dannys" homepage. You are not Danny's friend..but you are related to him through Steve (because you are a friend of steve, and steve is a friend of jason) I'm stumped trying to come up with a decent way to get this type of information..either in a sproc...or doing it in the business layer (c#). I think recursion is the way to go, and I could limit it to 4,5,6 levels whatever... again, efficiency isn't an issue here...I just want to somehow pull the data cleanly. Any ideas?
I've been searching around for some info on how to set this up, but with no luck.I need to have a .sql file that will set up a few tables and these tables will have relationships and contraints.I can do this by hand in enterprise manager, but need to set up some procedures that will do the same thing.For instance, I can create the tables just fine.....CREATE TABLE students ( sId int NOT NULL PRIMARY KEY, studentId varchar(50) NOT NULL, course varchar(50) ) CREATE TABLE courses ( cId int NOT NULL PRIMARY KEY, course varchar(50) NOT NULL, sco varchar(50) )But, I need to set up relationships in there somehow.Once student may have many courses (one to many) and one course may have many sco's (one to many) SCO would be another table.Can someone point me to a good link that would show how to complete these procedures?Thanks all,Zath
I'm looking for a query I can use to alter table relationships. What I want to do in particular, is to set every relationship to cascade on update. Can anyone point me out to a solution? MSDN seems very vague in this subject.
Does any one know of a way that a group of my developers can use this without giving them access to the rest of Enterprise manager?
Want to give them access to write queries and they are all Access developers so that I have to do as little training as possible then letting them have Query designer would keep them in their nice little world without hassing me to much.
When i'm trying to open the table say return all rows in Enterprize manger it gives me an error saying Query Designer encountered a query error Unspecified Error. I could not figure out what's goin on...
I appriciate if any one can help me out solving with this problem.
I use the Report Wizard to generate reports. Within the "Design the Query" screen, I try the query statement as : exec mydb.dbo.rptSales @fortheyear It shows me an error: Implicit conversion from data type sql_variant to smallint is not allowed. Use the CONVERT function to run this query.
The stored procedure of rptSales is CREATE PROCEDURE dbo.rptSales @pyear smallint=null AS .......
The rptSales has been tested OK on SQL Server Management Studio.
Actually, I have other similiar stored procedures using smallint as a parameter, and I can use the Report Wizard to generate reports, except the above one.
I've got SQL Server 7.0 SP1 installed (in a NT4 SP6 environment).
Recently, it came up with error whenever I try to open a table or a view (return all rows) inside the Enterprise Manager. The descriptive (NOT!) error message is like this:
"The query cannot be executed because some files are either missing or not registered", and on pressing "help", the help files report "Query Designer cannot locate your query files and cannot run your query"
I have tried re-booting the machine and upgrading mmc.exe to version 1.2 (from 1.1), but both in vain.
Checked out BOL on this issue, but not enough info received to troubleshoot. Hoping someone out there has some input.
This issue is only happening on the server side not the client. Also, it suddenly appeared on three different machines.
Query Designer: "An unexpected error happened during this operation" [Query} - Query Designer encountered a Query error: Unspecified error.
The how: In a database, go to tables and select a table known to have data right click on mouse and select Open Table, return all rows. This is when the error appears.
BOL states the the file may be corrupt or from a non-supported version of SQL Server EM. Nothing was installed on these servers and we're still on SP2. This error just all of a sudden appeared and spread to 3 different machines...
Another issue is the Return to Top function is disabled. This function provides the maximum number of rows to fetch.
When I try to Return All Records in a table, I receive the error "Query Designer encountered a query error: unspecified error." I can successfully view the design of the table just not the records themselves. This is happening in all of my tables in all dbases.
My database has just recentrly been upgraded to SQL 2005 and i have noticed a change in the interface when writing a query in "Query Designer"
For one of our tables we have a 'Time' field. I know that time only doesnt exist yet and upon insertion a default date of 30/12/1899 is automatically inserted. Im happy with that!
My concern is with Query Designer. If i build a query using the criteria grid and for the time field i filer on >=13:00:00 (example), the SQL that it creates looks like this:
As you can see is automatically inserts the current date instead of 30/12/1899. This obviously causes my sql to not work unless i manually change the date in the SQL to 1899-12-30
In SQL 2000 i did not have to do this, it would automatically write the SQL as :
I am having a problem with what appears to be a very trivial task in the graphical query designer. When I enter =@County into the filter column quotes are automatically added like = '@County' which the makes the query string inaccurate (looking for a literal County = "@County" in the where clause).
I am using Studio 2005 and SQL Server 2005 with the newest service packs and retreiving data from an Oracle 10G database.
If I remove the quotes and run the query through the generic query designer in my SQL reporting project I get the error "ORA-00936: missing expression".
It is as if the SQL Reporting Project does not understand the meaning of the @ symbol for entering a parameter.
What am I missing here? I thought @ specified that this would be a parameter and you then just needed to supply the values for the parameter.
Iam trying to see the rows using e/m i.e by right clicking tables and choosing return all rows option but it gives me an error but if i chose the other options(i.e. design table etc) it works well.only that return rows option in all the databases doesn't work.
Again iam able to retrieve rows from query analyzer.
The error which it gives is:
An unexpected error happened during the operation.
[Query]-Query Designer encountered a Query error:Unspecified error.
Please if anyone knows the solution mail it to l_muthu@hotmail.com
I have lost the ability to query any table in my database using the Query Designer/table viewer in Enterprise Manager. I get the following error: Query Designer has encountered an error. Unspecified error.
I can still query the table from SQL Query Analyzer and the client front end. Has anyone seen this problem before?
I have recently started working on Sql server management studio. I have been using MS access in the past. To link results of 2 queries in MS access I would open the query wizard and it would show me the list of saved queries and then I could join them as regular tables. Im trying to look for this option in management studio. When I open query designer in management studio I am only given the option to add existing tables, how can I add existing queries?
Clicking Query, Dsign Query in Editor opens a Query designer in a model window that does not use the query tool bar. Oening a New Query pane does not enable it.
The nly way I have found to activate the query tool bar is to:
1. Right click a table then click open table. 2. Stop retreving data. (if it is a large table)
Now the Query Designer toolbar is enabled.
What is the correct way to enable the Query Designer toolbar?
Here is my situation. I have a fairly large query that I am working on in visual studio (data tab). I am at the point where the program will NOT let me type (add SQL code) anymore. I found that clicking the Generic Query Designer (turning the query builder on) button switches the format then allows me to add more code. Well, this solves the running out of room issue, BUT now it does something to my code and it will not process it. Prior to clicking the Generic Query Designer button, everything worked w/ no errors. I did not change anything, but simply pressed the Generic Query Designer button (turning the query builder on) and now it dose not work now. Just for kicks, I have pasted my working origional code into SSMS, added code and it executed just fine in SSMS. But then I pasted back into visual studio and it gave me the same errors?
Has anyone experienced this? Is there a maximum for lines of code? Why does the Generic Query Designer (having query builder on) change my code? All comments are welcome!
Just learning SQL Server, using MS Step by Step book. I think I should be able to right click in query designer pane and save-as query. I see this option in context menu. When I try to save file, I don't get file dialog to specify file name. I also don't get error. Any ideas?
