ReportViewer ASP Component RefreshReport Didn't Appear.
Jul 27, 2007
Hi every body !
I try to insert the reportViewer in my asp page, all is good, but if I want to change (by choosing another report), and i cannot call the method RefreshReport() as I saw in the msdn documentation.
I didn't understand why, I download the ReportViewer from msdn download : the version is 2.0.50727.42 from 22/01/2006...
I implement in my asp designer tools the following dll : Microsoft.SqlServer.UpgradeAdvisor.ReportViewer.dll 9.0.1399.1 from 14/10/2005
Did I forget any code line ? or did I download a bad version ?
I'm creating a custom interface for reporting services but I am having a few problems. This is my environment:
Using the ReportViewer component in remote mode to show my reports of the report server. There are 2 user levels of which any user can be apart of, Admin & user. In every report, there is a parameter called MERCHANTID, when the user who logs in (via custom login interface) is of group admin, then the merchantid parameter gets prompted before the report is run, if the group of the user is "user" then the merchantid parameter is hidden, and is passed programatically to the report. The report path also
My Questions:
1. When my reportviewer component loads up the report and prompts for a parameter, when you select a parameter value or type it in, it just posts back with no results, just the parameter prompt again with no data... How can this be corrected?
2. How do I pass report parameters programatically... so that when my user id of group "user" then "merchantid" gets passed automatically, but if there is any more parameters, then that gets prompted...
I have a web app which contains a ReportViewer control for viewing reports on hosted on my ReportsServer instance.This web app runs under the identity DOMAINWebAppAccount.
When I try to access a Report I get the following error:
The permissions granted to user €˜DOMAINChipsC€™ are insufficient for performing this operation. (rsAccessDenied)
ChipsC is the username I log into the machine I launch the browser from.
My question is how can I get the ReportViewer to access the reports based on the WebAppAccount user instead of the ChipsC user (or any other user)?
I have a package that has a data lfow task. this task imports data from a db2 database (using the IBM Ole DB provider fro db2) and adds it to sql server database table. This package was created on the server. then though version control (using TFS source control) I check out the package on my local machine. and when I open the package I get the foll 3 errors.
Error 1 Validation error. Import Account Num from BMGP_BDR: DTS.Pipeline: The component metadata for "component "DataReader Source" (1113)" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
Error 2 Error loading BMAG Download Xref Tables - bmag.dtsx: Microsoft.SqlServer.Dts.Pipeline.ComponentVersionMismatchException: The version of component "DataReader Source" (1113) is not compatible with this version of the DataFlow. [[The version or pipeline version or both for the specified component is higher than the current version. This package was probably created on a new version of DTS or the component than is installed on the current PC.]] at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostCheckAndPerformUpgrade(IDTSManagedComponentWrapper90 wrapper, Int32 lPipelineVersion)
Error 3 Error loading BMAG Download Xref Tables - bmag.dtsx: The component metadata for "component "DataReader Source" (1113)" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
I have a package which reads an Access file from a folder. My connection manager to this file is .NET providers for OledbMicrosoft Jet 4.0 OLE DB Provider.
Package works from my computer. But when I execute it on the server as a SQL Agent job, I get
The component metadata for "component "DataReader Source" (1) could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
I copied the mdb file to a folder on the server which my packages have no problem reading data from.
My packages run under the same domain account as defined in proxies.
First latest Identity column is 5 I try to insert value to table which have Identity column by ExecuteNonQuery() method. There was some error and rollback this transaction.and then I modified code for completely saving after that I try to insert value again by running program although this transaction completely But value in identity is 7 ( It seems value 6 didn't rollback when not completely saveing ) Please advise me How can I rollback Identity column value ?
I have a transaction log that is 80% full and will not dump. I have used the "dump transaction dbname with no_log" command. It return the usual "This command did not return data, and it did not return any rows". However, this didn't do anything. The transaction log is still full. I don't want to restart the server if I don't have to. Any ideas?
We have Active/Passive cluster on Windows 2003. It is a 2 nodes cluster. The active server came down and the Cluster didn't failover. Then we had to manually failover. Can you help me to decipher the Cluster.log to find out why it didn't failover?
00000d08.000012a8::2007/10/12-04:04:40.847 ERR SQL Server <SQL Server>: [sqsrvres] CheckQueryProcessorAlive: sqlexecdirect failed 00000d08.000012a8::2007/10/12-04:04:40.847 ERR SQL Server <SQL Server>: [sqsrvres] printODBCError: sqlstate = HYT00; native error = 0; message = [Microsoft][SQL Native Client]Query timeout expired 00000d08.000012a8::2007/10/12-04:04:40.847 ERR SQL Server <SQL Server>: [sqsrvres] OnlineThread: QP is not online. 0000077c.000003dc::2007/10/12-04:04:43.785 INFO [CP] CppRegNotifyThread checkpointing key SoftwareMicrosoftMicrosoft SQL ServerMSSQL.1MSSQLSERVER to id 4 due to timer 0000077c.000003dc::2007/10/12-04:04:43.785 INFO [Qfs] QfsGetTempFileName C:DOCUME~1SVC_CL~1LOCALS~1Temp, CLS, 13522 => C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D2.tmp, status 0 0000077c.000003dc::2007/10/12-04:04:43.785 INFO [Qfs] QfsDeleteFile C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D2.tmp, status 0 0000077c.000003dc::2007/10/12-04:04:43.785 INFO [Qfs] QfsRegSaveKey C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D2.tmp, status 0 0000077c.000003dc::2007/10/12-04:04:43.785 INFO [CP] CpSaveData: checkpointing data id 4 to quorum node 1 0000077c.000003dc::2007/10/12-04:04:43.785 INFO [CP] CppWriteCheckpoint checkpointing file C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D2.tmp to file Q:MSCS 592a048-5457-426a-a46d-996441ef0182 0000004.CPT 0000077c.000003dc::2007/10/12-04:04:43.785 INFO [Qfs] QfsCreateDirectory Q:MSCS 592a048-5457-426a-a46d-996441ef0182, status 183 0000077c.000003dc::2007/10/12-04:04:43.785 INFO [Qfs] QfsOpenFile C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D2.tmp => 3, 36cf960 status 0 0000077c.000003dc::2007/10/12-04:04:43.785 INFO [Qfs] QfsOpenFile Q:MSCS 592a048-5457-426a-a46d-996441ef0182 0000004.CPT => 2, 36cf8d0 status 183 0000077c.000003dc::2007/10/12-04:04:43.785 INFO [Qfs] ReadFile 928 (regf) 32768 16384, (0=>0) 0 status 0 0000077c.000003dc::2007/10/12-04:04:43.785 INFO [Qfs] WriteFile 95c (regf) 16384, status 0 (0=>0) 0000077c.000003dc::2007/10/12-04:04:43.785 INFO [Qfs] ReadFile 928 (regf) 32768 0, (0=>0) 0 status 0 0000077c.000003dc::2007/10/12-04:04:43.785 INFO [Qfs] QfsFlushBuffers 95c, status 0 0000077c.000003dc::2007/10/12-04:04:43.785 INFO [Qfs] QfsCloseHandle 928, status 0 0000077c.000003dc::2007/10/12-04:04:43.785 INFO [Qfs] QfsCloseHandle 95c, status 0 0000077c.000003dc::2007/10/12-04:04:43.785 INFO [Qfs] QfsDeleteFile C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D2.tmp, status 0 0000077c.000003dc::2007/10/12-04:06:23.084 INFO [CP] CppRegNotifyThread checkpointing key SoftwareMicrosoftMicrosoft SQL ServerMSSQL.1MSSQLSERVER to id 4 due to timer 0000077c.000003dc::2007/10/12-04:06:23.084 INFO [Qfs] QfsGetTempFileName C:DOCUME~1SVC_CL~1LOCALS~1Temp, CLS, 13523 => C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D3.tmp, status 0 0000077c.000003dc::2007/10/12-04:06:23.084 INFO [Qfs] QfsDeleteFile C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D3.tmp, status 0 0000077c.000003dc::2007/10/12-04:06:23.084 INFO [Qfs] QfsRegSaveKey C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D3.tmp, status 0 0000077c.000003dc::2007/10/12-04:06:23.084 INFO [CP] CpSaveData: checkpointing data id 4 to quorum node 1 0000077c.000003dc::2007/10/12-04:06:23.084 INFO [CP] CppWriteCheckpoint checkpointing file C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D3.tmp to file Q:MSCS 592a048-5457-426a-a46d-996441ef0182 0000004.CPT 0000077c.000003dc::2007/10/12-04:06:23.084 INFO [Qfs] QfsCreateDirectory Q:MSCS 592a048-5457-426a-a46d-996441ef0182, status 183 0000077c.000003dc::2007/10/12-04:06:23.084 INFO [Qfs] QfsOpenFile C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D3.tmp => 3, 36cf960 status 0 0000077c.000003dc::2007/10/12-04:06:23.084 INFO [Qfs] QfsOpenFile Q:MSCS 592a048-5457-426a-a46d-996441ef0182 0000004.CPT => 2, 36cf8d0 status 183 0000077c.000003dc::2007/10/12-04:06:23.084 INFO [Qfs] ReadFile 95c (regf) 32768 16384, (0=>0) 0 status 0 0000077c.000003dc::2007/10/12-04:06:23.084 INFO [Qfs] WriteFile 928 (regf) 16384, status 0 (0=>0) 0000077c.000003dc::2007/10/12-04:06:23.084 INFO [Qfs] ReadFile 95c (regf) 32768 0, (0=>0) 0 status 0 0000077c.000003dc::2007/10/12-04:06:23.084 INFO [Qfs] QfsFlushBuffers 928, status 0 0000077c.000003dc::2007/10/12-04:06:23.084 INFO [Qfs] QfsCloseHandle 95c, status 0 0000077c.000003dc::2007/10/12-04:06:23.084 INFO [Qfs] QfsCloseHandle 928, status 0 0000077c.000003dc::2007/10/12-04:06:23.084 INFO [Qfs] QfsDeleteFile C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D3.tmp, status 0 0000077c.000003dc::2007/10/12-04:08:08.259 INFO [CP] CppRegNotifyThread checkpointing key SoftwareMicrosoftMicrosoft SQL ServerMSSQL.1MSSQLSERVER to id 4 due to timer 0000077c.000003dc::2007/10/12-04:08:08.259 INFO [Qfs] QfsGetTempFileName C:DOCUME~1SVC_CL~1LOCALS~1Temp, CLS, 13524 => C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D4.tmp, status 0 0000077c.000003dc::2007/10/12-04:08:08.259 INFO [Qfs] QfsDeleteFile C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D4.tmp, status 0 0000077c.000003dc::2007/10/12-04:08:08.259 INFO [Qfs] QfsRegSaveKey C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D4.tmp, status 0 0000077c.000003dc::2007/10/12-04:08:08.259 INFO [CP] CpSaveData: checkpointing data id 4 to quorum node 1 0000077c.000003dc::2007/10/12-04:08:08.259 INFO [CP] CppWriteCheckpoint checkpointing file C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D4.tmp to file Q:MSCS 592a048-5457-426a-a46d-996441ef0182 0000004.CPT 0000077c.000003dc::2007/10/12-04:08:08.259 INFO [Qfs] QfsCreateDirectory Q:MSCS 592a048-5457-426a-a46d-996441ef0182, status 183 0000077c.000003dc::2007/10/12-04:08:08.259 INFO [Qfs] QfsOpenFile C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D4.tmp => 3, 36cf960 status 0 0000077c.000003dc::2007/10/12-04:08:08.259 INFO [Qfs] QfsOpenFile Q:MSCS 592a048-5457-426a-a46d-996441ef0182 0000004.CPT => 2, 36cf8d0 status 183 0000077c.000003dc::2007/10/12-04:08:08.259 INFO [Qfs] ReadFile 7e0 (regf) 32768 16384, (0=>0) 0 status 0 0000077c.000003dc::2007/10/12-04:08:08.259 INFO [Qfs] WriteFile 95c (regf) 16384, status 0 (0=>0) 0000077c.000003dc::2007/10/12-04:08:08.259 INFO [Qfs] ReadFile 7e0 (regf) 32768 0, (0=>0) 0 status 0 0000077c.000003dc::2007/10/12-04:08:08.259 INFO [Qfs] QfsFlushBuffers 95c, status 0 0000077c.000003dc::2007/10/12-04:08:08.259 INFO [Qfs] QfsCloseHandle 7e0, status 0 0000077c.000003dc::2007/10/12-04:08:08.259 INFO [Qfs] QfsCloseHandle 95c, status 0 0000077c.000003dc::2007/10/12-04:08:08.259 INFO [Qfs] QfsDeleteFile C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D4.tmp, status 0 0000077c.00000844::2007/10/12-04:09:11.323 INFO [Qfs] GetDiskFreeSpaceEx Q:MSCS, status 0 0000077c.000003dc::2007/10/12-04:09:56.652 INFO [CP] CppRegNotifyThread checkpointing key SoftwareMicrosoftMicrosoft SQL ServerMSSQL.1MSSQLSERVER to id 4 due to timer 0000077c.000003dc::2007/10/12-04:09:56.652 INFO [Qfs] QfsGetTempFileName C:DOCUME~1SVC_CL~1LOCALS~1Temp, CLS, 13525 => C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D5.tmp, status 0 0000077c.000003dc::2007/10/12-04:09:56.652 INFO [Qfs] QfsDeleteFile C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D5.tmp, status 0 0000077c.000003dc::2007/10/12-04:09:56.652 INFO [Qfs] QfsRegSaveKey C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D5.tmp, status 0 0000077c.000003dc::2007/10/12-04:09:56.652 INFO [CP] CpSaveData: checkpointing data id 4 to quorum node 1 0000077c.000003dc::2007/10/12-04:09:56.652 INFO [CP] CppWriteCheckpoint checkpointing file C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D5.tmp to file Q:MSCS 592a048-5457-426a-a46d-996441ef0182 0000004.CPT 0000077c.000003dc::2007/10/12-04:09:56.652 INFO [Qfs] QfsCreateDirectory Q:MSCS 592a048-5457-426a-a46d-996441ef0182, status 183 0000077c.000003dc::2007/10/12-04:09:56.652 INFO [Qfs] QfsOpenFile C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D5.tmp => 3, 36cf960 status 0 0000077c.000003dc::2007/10/12-04:09:56.652 INFO [Qfs] QfsOpenFile Q:MSCS 592a048-5457-426a-a46d-996441ef0182 0000004.CPT => 2, 36cf8d0 status 183 0000077c.000003dc::2007/10/12-04:09:56.652 INFO [Qfs] ReadFile 928 (regf) 32768 16384, (0=>0) 0 status 0 0000077c.000003dc::2007/10/12-04:09:56.652 INFO [Qfs] WriteFile 7e0 (regf) 16384, status 0 (0=>0) 0000077c.000003dc::2007/10/12-04:09:56.652 INFO [Qfs] ReadFile 928 (regf) 32768 0, (0=>0) 0 status 0 0000077c.000003dc::2007/10/12-04:09:56.652 INFO [Qfs] QfsFlushBuffers 7e0, status 0 0000077c.000003dc::2007/10/12-04:09:56.652 INFO [Qfs] QfsCloseHandle 928, status 0 0000077c.000003dc::2007/10/12-04:09:56.652 INFO [Qfs] QfsCloseHandle 7e0, status 0 0000077c.000003dc::2007/10/12-04:09:56.652 INFO [Qfs] QfsDeleteFile C:DOCUME~1SVC_CL~1LOCALS~1TempCLS34D5.tmp, status
You can use a Select top @variable in sql server 2005:Thus:--'Throttle' the result set:Select Top (@MaxBatchSize)KeyID, LId, ArrivalDt, CaptureDt, Lat, LongFrom GPSDataOrder By CaptureDt DescMakes messing with Set Rowcount *so* redundant :-)
i made an application using vb6 that access the table in a sqlserver database and in the load event i write cn.mode=adsharedenyread
and i make two copies of the application and run them both of them read the data and no deny happen !!! although both of the applications have adsharedenyread
how can i make privilage for some users to read or write ? by the way is that can be done in ado.net 2.0 ?
--create a temp table like: select * into #tmp from (select 1 as ID union all select 2 union all select 3 union all select 4 ) as A
-then run this query: select B.ID,isNull(B.GID,0) as GID from (select #tmp.ID,A.GID from #tmp left outer join (select ID,1 as GID from #tmp where ID in (2,4)) A on #tmp.ID = A.ID ) as B
--I thougth it should return: 10 21 30 41 --but it actually returned: IDGID 11 21 31 41 --if I change GID value in '...(select ID,1 as GID from #tmp where ID in (2,4)...', for example 2, then it return: IDGID 12 22 32 42
I have just done my first clean install of SQL 2005. I have previously upgraded several boxes from SQL 2000 without incident.
The clean install seemed to go fine but the Maintenance Tasks didn't install? I have looked on the web but have been unable to unearth any information. Has anyone encountered this before and if so I how do I add Maintenance Tasks to the Management folder?
I created a SSIS package that imports a file then moves the file to a folder called processed. I created a job that runs the package. The pack works fine when I run it from the SQL Storage Area. When I run the job I get the following message:
Started: 9:58:15 AM DTExec: The package execution returned DTSER_SUCCESS (0). Started: 9:58:15 AM Finished: 9:58:21 AM Elapsed: 6.047 seconds. The package executed successfully. The step succeeded.
showing that the job supposedly completed successfully.
I know that the package the not run because the data did not get imported and the file did not move.
Can anyone explain the package may not run but we still get a job completion status of success?
I have 1 table: ID pagename datevisited 1default01/01/2006 1info01/01/2006 1default02/01/2006 1info02/01/2006 1summary02/01/2006 2default02/01/2006 2info02/01/2006 2summary02/01/2006
I need to run query for ID who didn't visited a summary page(per day) How do I do this?
I have a backup plan that remove the old backup files more than two days. Last Monday, the SQL Server restart. Since that, the backup is fine, but it didn't remove the old backup files. Why and how to handle that? Thanks
I ran a SQL statement to get the data from two tables using join. These two tables have a column in the same name €œID€?.
SQL=€?select * from table1 a, table2 b where a.ID=b.ID€? Set RS=DB.Execute(SQL)
The statement worked. But when I output the records in my ASP pages, I got an error: ADODB.Recordset error '800a0cc1' Item cannot be found in the collection corresponding to the requested name or ordinal€?
This is the line caused error: <%= RS(€œa.ID€?) %>
It seemed that SQL Server recordset doesn€™t carry the table aliens. If I removed a. from ID the error was gone but it gave me the value of b.ID.
my problem is i create a user in sqlserver from enterprise manager as follows:-
1- goto logins and new login 2-type a name and choose sqlserver authentication and type a password 3- from server roles tab i choose system administrators 4 from database access i choose the database i need that user to connect to .and OK 5-i goto database node in enterprise manager and select the database and the table and double click on it and choose permissions and de-select the SELECT privilige
then i use ADO to connect to sqlserver through that user and when i select(SQL query) the table the data appeared normally !!!! and it suppose to give me exception
Dear all, I have built an SSIS package by using the BI Dev Studio and enabled its configuration xml file. The package have a variable called TranDate and I want to put it dynamically from a Calendar on my website (just like assigning a variable). I have successfully change the value of that variable in the configuration files (affected to the xml file). Then I loaded the package and executed it (through my web). It's still get the old value (which I have assigned while creating the package). I didn't understand that where else can the package get the value of that variable so it still get the old value (that value have never appeared in the xml configuration file anymore when I changed it).
Thanks for reading this, and I am looking forward to seeing any helps from you guys.
Dear all, I've been searching the article for error handling in SSIS but seems no article have same problem exactly as mine. In my package there's container, it contains Data Flow task and some of Script tasks. I put an error precedence from Data Flow task into Script task that contains script for log an error that might be occured. The Data Flow task imports data from flat file into SQL Server 2005 and I've set a semicolon as the column delimiter. Unfortunately there is a data in flat file that had one column contain semicolon as its value. This would trigger an error and I hope the error would be logged into a table as I wrote inside Script task. But it didn't work. The error precedence won't work, the package stop in flat file source instead. I've been trying the event handler but it didn't work either. Maybe I got wrong implementation, anybody can help me explain the error handler and solve the problem ? Here is the capture of my package, since I didn't know how to attach the picture in this forum. Thanks in advance.
In a Data Flow, I have the necessity to use a SSIS variable of type €œObject€? inside Script Component and assign to it the content of 'n' variables of string type. On exiting from the script the variable of type object should contain something like in the following lines: AAAAAAAAAAAAAAAAAAAAAAAAAAAAA BBBBBBBBBBBBBBBBBBBBBBBBBBBBB CCCCCCCCCCCCCCCCCCCCCCCCCCCCC DDDDDDDDDDDDDDDDDDDDDDDDDDDDD €¦€¦€¦€¦€¦€¦€¦. €¦€¦€¦€¦€¦€¦€¦. On exiting from the data flow I will use the variable of type Object in a Script Task, by reading each element in a cyclic fashion. Is there anyone who have experienced something like this? Could anyone provide any example of that? Thanks in advance!
Hi all I'm into a project which uses a lot of views for joining 2 or more tables. Using the MERGE component in SSIS will be a huge effort coz it only has 2 inputs and I gotta SORT the input too. Isnt it possible to have a VIEW like component that joins more than 2 tables and DOESNT need sorting?? (I've thought about creating views in database engine but it breaks my data floe in SSIS and is'nt a practical solution)
I am writing a custom dataflow transformation component and I need to get the name of the preceeding component.
I have been trying to find a way to get a reference to the Package object, MainPipe object or IDTSPath90 object (connecting to the IDTSInput90 of my component) from my component because I think from there I can get to the information I want.
I am doing search through Date Range but didn't get correct result.
For Example if i created a Task on 5/8/2014 and when i have take Date Range from 1/8/2014 to 6/8/2014 then didn't get 5/8/2014 data in result but when i taken range from 1/8/2014 to 5/8/2014 then got the 5th Date data.
I thought I had applied sp2 successfully but I discovered when I tried to apply the hotfix ( sqlserver2005-kb933097-x86-enu.exe), that the SQL Server Tools and Workstation Components wasn't at the 3042 level.
The recommendation in the log file is to:
"Update 3152 is dependent on prerequisite update 3042. Exit setup and refer to the Knowledge Base article to find the prerequisite patch."
Does anyone know where I find the prerequisite patch?
Any help would be appreciated.
Regards Noel
Time: 03/13/2007 18:05:39.045 KB Number: KB933097 Machine: NOEL_EVO OS Version: Microsoft Windows XP Professional Service Pack 2 (Build 2600) Package Language: 1033 (ENU) Package Platform: x86 Package SP Level: 2 Package Version: 3152 Command-line parameters specified: Cluster Installation: No
********************************************************************************** Prerequisites Check & Status SQLSupport: Passed
********************************************************************************** Products Detected Language Level Patch Level Platform Edition SQL Server Database Services 2005 (SQL2005) ENU SP1 2005.090.3042.00 x86 DEVELOPER SQL Server Analysis Services 2005 (SQL2005) ENU SP1 2005.090.3042.00 x86 DEVELOPER SQL Server Reporting Services 2005 (SQL2005) ENU SP1 9.00.3042.00 x86 DEVELOPER SQL Server Notification Services 2005 ENU SP1 9.00.3042.00 x86 DEVELOPER SQL Server Integration Services 2005 ENU SP1 9.00.3042.00 x86 DEVELOPER SQL Server Tools and Workstation Components 2005 ENU SP1 9.1.2153 x86 DEVELOPER
********************************************************************************** Products Disqualified & Reason Product Reason SQL Server Tools and Workstation Components 2005 The product instance SQL Tools does not have prerequisite update 3042 installed. Update 3152 is dependent on prerequisite update 3042. Exit setup and refer to the Knowledge Base article to find the prerequisite patch. Install the prerequisite and rerun the installation.
Hi, i'm doing POS system by using C# in visual studio 2005. Recently, i installed the microsoft sql server management studio on my pc, i plan to do merge replication through local publications between my pocket pc and my pc. So, i opened the replication file which is under Object Explorer in microsoft sql server management studio, it ONLY show me the local subscription folder under the replication file.Do i install incomplete set of microsoft sql server management studio?Local publications and local subscription, which one is more suitable for POS system?
No idea where this bug crept in from. Have been using SSIS for 1.5 years now without hitting this problem.
I had a script component opening an XML document and parsing it using XPATH. I added some code that uses StreamReader / Streamwriter (closing one stream before starting the other). The code works without issue in my C# app.
And it ran without issue 2-3 times in SSIS. Then suddenly after running my package again, the script component says it completes successfully, yet nothing happens. I set a breakpoint on the first line of code - it never hits it. I add a msgbox as the first line of code - and it never displays.
I then close my package / exit out of ssis ... and then re-open it. When i open my script component, all of my code is GONE. All references that I added are gone.
I tried adding the streamreader/writer process to a dll I created from my c# app ... and added the DLL to the package -- same result.
I can reproduce this on 2 different computers.
Anyone experience this problem ? Any idea how to stop it ? Or debug it ?
Here is a slimmed down code sample of what causes the error :
Public Class ScriptMain Public Sub Main() Try Dim xmlDoc As New XmlDocument xmlDoc.Load("c:ulkasync_86281519_20070628045850225_4.xml") MsgBox("xmlLoaded") --this doesn't display once the package starts "acting up" Catch ex As Exception MsgBox(ex.Message) UpdateXML("c:ulkasync_86281519_20070628045850225_4.xml", ex.Message) End Try Dts.TaskResult = Dts.Results.Success End Sub Private Sub UpdateXML(ByVal fileName As String, ByVal message As String) Try Dim invalidChar As String = message.Trim().Substring(message.Trim().IndexOf("0x"), 4) Dim rd As StreamReader = New StreamReader(fileName) Dim xml As String = rd.ReadToEnd() Xml = Xml.Replace(invalidChar, String.Empty) xml = xml.Replace("", String.Empty) xml = xml.Replace("<![CDATA[<![CDATA[", "<![CDATA[") xml = xml.Replace("]]>]]>", "]]>") MsgBox("replaced") rd.Close() Dim wr As StreamWriter = New StreamWriter(fileName) wr.Write(xml) wr.Close() Dim xdoc As XmlDocument = New XmlDocument() xdoc.Load(fileName) Catch ex As Exception UpdateXML(fileName, ex.Message) End Try End Sub End Class
I have a 2.8G SQL 7 database with 1.6G used space. I want to shrink it to 1.8G, but after I issued the 'DBCC srhinkfile(datafile, 1800)', it didn't shrink the file, instead it expanded to 2.7G used space? I tried on a test server, the command worked every time although the time to complete the task tended to increase every time.
I did the DBCC DBREINDEX (fill factor 90) and updated usage, the size didn't change. DBCC CHECKDB, CATELOG AND SHOWCONTIG were all performed and there wasn't any error or fragmentation.
Now I'm wondering what's the actual size of my database, 1.6G or 2.7G? If there's a way that I can get back close to my original used sized, then I can try to shink the file again. Any comment is welcome. Thanks advance.
We have a sales fact table that has sales by customers, products, date etc. and dimension tables such as customers, products etc.
We built a multi-dimensional cube on top of these tables. how do we support queries like "show me top 10 products by sales amount and then show customers that didn't buy these products"?
