Reporting Services :: Report Parameter Shows (Select A Value) Only For First Selection

Jun 11, 2015

I have a rdl where its working fine while report preview, for parameter  it shows <Select a value> only first select . for next select its just showing dropdown list of values .

How can i get <select a value> for all selections. I referred few links which says only for first select you will get <select a value> ,from second select it just shows dropdown.

If we want <select a value> again then we should go back design part and then preview again. But I don't want. What is the possible way to see <select a value> for every select without going back to design.

View 3 Replies


ADVERTISEMENT

Reporting Services :: Parameter Selection For Users In Sub Report

Aug 9, 2015

I have a report with two parameters (@StartDate and @EndDate) to enable users to specify values to customize the data in the report. These two parameters are created within the Dataset. The parameter visibility is set to visible.Opening the report directly works as expected (the user is able to input the date parameters as he wishes and then sees only the data of the specified time period, see image1).Now I want to use this report as a subreport (beeing opened from my main report): But when I open the report within the main report (via action go to report) the parameters are not shown anymore, see image2.Why are the parameters not shown anymore?

-- I'm working with Reporting Services in SharePoint mode using Sql Server 2012, SharePoint 2013.

View 4 Replies View Related

Reporting Services :: How To Set Parameter In SSRS Which Shows Timeframe

Oct 28, 2015

I have created ssrs report which has a parameter for start date. I want another parameter which shows time-frame of 6months,12 months,18 months,24 months which calculate dynamically from my start date

select distinct [dbo].[MSP_EpmResource_UserView].[ResourceName], [dbo].[MSP_EpmProject_UserView].[ProjectUID],[dbo].[MSP_EpmProject_UserView].[ProjectManagerName] ,
[dbo].[MSP_EpmTask_UserView].[TaskStartDate],[dbo].[MSP_EpmTask_UserView].[TaskFinishDate],
[dbo].[MSP_EpmTask_UserView].[TaskPercentCompleted],[dbo].[MSP_EpmProject_UserView].[Project Status] AS StatusForExecutiveReporting,

[Code] ....

View 4 Replies View Related

Reporting Services :: Select Between From And To Dates In Multiple Parameter Report

Oct 26, 2015

I have a report that uses several filters including a from and to date filter, I have  a field named TimeLastMod which is a Timestamp. I am extracting the From and To dates from this field using Select format(TimeLastMod,'MMM') as FromMonth,format(TimeLastMod,'MMM') as ToMonth From Eventlogs syntax.

These I pass on to a parameter and eventually to a tablix filter in an between opeartion. When I run the report, the records returned by the report is not what is expected as it sometimes returns an extra months data e.g., using between Aug and Sept will return october data as well.

View 5 Replies View Related

Reporting Services :: SSRS Report Shows Incorrect Value In IE?

Aug 7, 2015

I have deployed a report in our server. After few days I tried accessing the report in Internet Explorer. It shows old data. Then I verified the .rdl file in BIDS. There it show actual data. So I deleted the Deployed report in Report manager and done the fresh report deployment.But Still it shows wrong / Incorrect data.Then I tried accessing the same Report link through Mozilla Browser.There it shows the perfect value.

All users are accessing the report in IE only. How to fix this issue.

Additional Info: The same link works fine in One of my colleague system (IE). Then I verified his IE version. He was using IE 11.But  I'm also using same version.

Then I verified with some other systems. There they found the same issue which I faced. They were also using IE 11.

View 11 Replies View Related

Reporting Services :: Passing All Parameter Selection To Dataset Query

Nov 20, 2015

I have a report that prompts the user to select a parameter, for simplicity, let's say the parameter is for color choice, options are Red, Yellow, Blue or *. The * is for include all colors. I am passing that parameter back to the dataset query which, again for simplicity is

select
Hue from AvailableColors
whereColor
= @ColorParam.

For a specific color this works fine, for the "*" selection it returns a null. It would seem that I need to convert the * to % but I am not sure how.....

View 6 Replies View Related

Reporting Services 2005 - View Report Button Clears Select All Parameter Choices

Jan 3, 2008

Has anyone encounted a problem with Reporting Services (2005) with the following scenario:
A report with a dropdown parameter allowing a Select All choice -

If the selection list is fairly long and Select All is selected - if the user clicks the View Report button the selection list is completely reset (i.e. all items are unselected). This seems to happen if the user quickly clicks the View Report button immediately after clicking the Select All box on the parameter dropdown.

This happens inconsistently - some users experience it frequently while others do not see it at all (using the same parameter values, etc.)

View 1 Replies View Related

Reporting Services :: Interpreting Specific Report Rendering From What The Log Shows

Jul 7, 2015

We run std 2008.   In my ssrs log I see this for one of our most critical reports...

library!ReportServer_0-64!2244!07/07/2015-08:24:53:: Call to GetPermissionsAction(/somedirectory/somedirectory1).... which I assume is an indication of a report starting to render by first checking permissions.

Around the time my user says he still saw the revolving arrow and he stopped the report because he felt it was running too long, I see...

webserver!ReportServer_0-64!1dbc!07/07/2015-08:54:44:: i INFO: Processed report. Report='/somedirectory/somedirectory1/importantreport', Stream=''

How can it be true that he stopped it and ssrs reports that it processed the report?

About 4 minutes later I see this entry in the log...

webserver!ReportServer_0-64!15e4!07/07/2015-08:58:34:: i INFO: Processed report. Report='/somedirectory/somedirectory1/importantreport', Stream=''

Which processed report message is right?  Could there be multiples cuz of subreports? I see a number of errors and exceptions around these same times but do not know how to tie either to a specific report. Is there a way?

View 3 Replies View Related

Reporting Services :: Parameters Drop Down Selection Not Showing In The Report?

Aug 31, 2015

I created a re port using the Report builder. The report runs fine. I want to create a parameter on the report. I created a new dataset with the query "select distinct dept from table" . Then i created a new parameter to get the values from the second dataset. After running the reports when i selected 2 departemnts, its still showing all the records.

View 3 Replies View Related

Reporting Services :: Displaying Report Parameter Based On Another Parameter

Aug 10, 2015

I am using report builder 3.0.

I have a report parameter called para1 which is a drop-down list and what I want to do is display another report parameter based on the para1 selection.

So for example, para1 contains a, b, c choices.  if a user selects b, I would like para2 to display but if the user selects a or c, I don't want the para2 to display.

View 5 Replies View Related

Reporting Services :: Adding Dataset Parameter Doesn't Add Report Parameter In Visual Studio 2008 SSRS

Apr 22, 2015

I'll go to a dataset, open up the query designer, add a new parameter, then refresh the fields, but the parameter won't be added as a report parameter.  If I go to the dataset properties under the list of parameters, the value in the dropdown will be blank.  However, sometimes this will automatically add. 

Is this a bug in Visual Studio?  How do I get around this? 

View 3 Replies View Related

Reporting Services :: How To Change Parameter Visibility When Accessing Report From Report Manager

Apr 16, 2015

I am working on reports in SSRS 2008 (not R2)... There are some reports with parameters that are hidden when the report is accessed through normal URL using ReportViewer.asx..The thing is that these hidden parameters need to be visible when the report is accessed using SSRS Report Manager.

View 3 Replies View Related

SSRS (SQL Server Reporting Services) : Issue Navigating From Report To Report: Parameter Is Missing A Value

Sep 5, 2007

Hi,
I'm having problems navigating from one report to another one if the second report has a multi-valued report parameter. When I navigate to the second report, I don't pass any parameters, but I get an error "parameter is missing a value" for the multi-valued report parameter. I have it setup as allow "multi-value" and "blank value". Any idea what the issue might be?
Thanks.

View 3 Replies View Related

Reporting Services :: Set Report Parameter

Sep 10, 2015

I'm facing to set report parameter  report parameter need to be date time  so that calendar will be displayed but data set field is integer data type?Now report shows error message.

View 4 Replies View Related

Reporting Services :: Passing More Than One Parameter From URL To Other Report?

May 25, 2015

I am trying to pass more then one parameter from URL , Below is my URL

="javascript:void(window.showModalDialog('http://in-mh-co-dt0030/ReportServer_SQLSERVER2012TAB/Pages/ReportViewer.aspx?%2fTest%2fProduct_WiseV1.0&rs:Command=Render&Lob="+Fields!Line_of_Business.Value+"&Year="+Sum(Fields!Year_list.Value,
"Year_Param_DS")+"', ''))" 

 Lob parameter is in the same dataset , But Year parameter is from different Dataset(Year_Param_DS).But If I am passing second parameter (Year) like Sum(Fields!Year_list.Value, "Year_Param_DS") i am not able to open the popup.

If i am removing the sum word Main report is giving an error that "Report item expressions can only refer to fields within the current dataset scope or, if inside an aggregate, the specified dataset scope."e syntax (I am working using MDX query) to pass two parameter through url, one from same dataset and 2nd is from another dataset.Or it is not possible to pass the value field from other Dataset in URL (Go to URL option).

View 2 Replies View Related

Passing A Report Parameter To Reporting Services From VB

Mar 31, 2006

I have a Report that I want to access that has a parameter input for the date, Production_Date. I want to allow the user to use the DateTimePicker to select the date to use for Production_Date. I can't seem to find the correct way to format what I'm tring to do. My production date field is in a format without punctuation so that it becomes:

Dim ProductionDate = ((DateTimePicker1.Value.Month * 1000000) + (DateTimePicker1.Value.Day * 10000) + DateTimePicker1.Value.Year)

which gives me a value that I want to send as a parameter for the Reporting Services report that I have located on a tab in my project. The report is:

Me.ReportViewer1

I want to send the ProductionDate to the report where the report looks for Production_Date. Obviously, I 'm very new to this. I'd appreciate any suggestions. As it runs now, the default date is loaded (today's date) from the expression I calculated in Reporting services:

=(Now.Month*1000000)+(Now.Day*10000)+Now.Year

This is a big roadblock right now and I can't seem to put together a legal means to pass this value. Thanks for any help.

View 8 Replies View Related

Reporting Services :: Multiple Select Parameter Only Selecting First Value?

Sep 8, 2015

I have a SSRS report with a Parameter that lets you choose the name of an employee. The report lists their Name, Number, User ID etc.

When you select a single employee, the filter on the Dataset works perfectly. However once you select two or more employee names, it only returns the first result. 

The parameter, Field, and Filter are text. 

The Filter is EmployeeName IN @EmployeeName

View 8 Replies View Related

Reporting Services :: Automatically Select All In Parameter After Refresh

Apr 20, 2015

Is it possible to set the parameter option to "Select all" after the options in the parameter have been filtered by another parameter? For example:

Parameter Area contains Europe, North America, South America.
Parameter Country contains the country's that are in Europe, North America and South America.

When the Area Parameter is set to Europe, the country parameter only contains the country's that are in Europe. When you want to see the complete dataset in the report again, you change the Area Parameter to Europe, North America and South America again, and press view report.

Then the Country Parameter only has the country's that are in Europe selected, so the dataset is still filtered to the European country's. Is it possible to automatically set the country parameter to select all after the Area parameter has been se back to all Area's again?

View 3 Replies View Related

Reporting Services :: Parameter That Filters And Also Select ALL At Same Time

Apr 26, 2015

I have a situation

1. I have a parameter @Param1 that accepts multiple values

2. I have to display data based on selected values of @Param1 

Here comes the tricky part.

3. I have to aggregate on all the available values of the @Param1
 
Do I need to take a hidden parameter just for aggregation? Or is there any other way?

View 3 Replies View Related

Passing Parameter From Asp.net Application To Reporting Services Report

Jul 9, 2007

Hi,

There is a .net application which has a screen with four options(text boxes)

Each of these should take to reports generated by SQL REp Services

This is the requirment

The School selected in the App should be passed on to the report

How should I pass the parameter in my report

so that when user selects a link or text box report for that particular school number is displayed



Thanks

sowree

View 3 Replies View Related

Reporting Services :: Drill Through Report Parameter Getting Unselected

Sep 30, 2015

I am experiencing some issue with drill through report parameter not getting selected some times.I have two reports parent and child. Both reports have total ten parameters and all are cascading parameters with multiple selection. The report, when drill through to child, first eight parameters selected as it in the parent report.But the ninth parameter not get selected with the default value which from parent report and the parameter populated with values.

The first two parameter type is  date time and rest of them are text and all text type parameters available and default values are populated by query (Data set) only.

View 3 Replies View Related

Reporting Services :: Multi Value Integer Parameter For A Report

Jul 2, 2015

I'm building a report and I want to have a parameter that has multiple integer values (not text).I can get it to work just fine if I create a value for each and every numeric value, but I want the user to only see two choices in the dropdown menu (plus the "Select All" that gets automatically created when I tick the box for "Allow multiple values"). How can I make this work?

For example, for my TYPE parameter I'd like something like this:
Label: Tigers
Value: 2
Label: Lions Bears Oh My
Value: 1,3,4,5,6

But I can't seem to set a multiple Value for an integer. And I can't seem to wrap the value with quotes and use Text as the Data Type because it says an error occured during processing (I assume because the field I'm going against is of the Integer format).My query would look something like this (the real one is a lot more complex):

SELECT
v_R_System.Netbios_Name0
,v_GS_COMPUTER_SYSTEM_EXT.PCSystemType0
FROM
v_R_System
INNER JOIN v_GS_COMPUTER_SYSTEM_EXT
ON v_R_System.ResourceID = v_GS_COMPUTER_SYSTEM_EXT.ResourceID
WHERE
v_GS_COMPUTER_SYSTEM_EXT.PCSystemType0 IN (@TYPE)

I've tried different Expressions, filters, options, syntax, and what-not, but I think I'm missing something basic.

View 2 Replies View Related

Reporting Services :: Default Value In Parameter SSRS Report

May 7, 2012

I created a parameter with available values from a dataset.

By default i want it to display the maximum value. and then the user can select the dates if he does not like the default value.

How to i do this. because when i tried to set the paramter default value to max(dataset!dt.value) it says expression canot be used.

How to do this. Should I create a dataset with maximum value and then assign it to this one.

View 12 Replies View Related

Reporting Services :: How To Schedule Report To Run Automatically Which Has Date Parameter

Jul 8, 2011

How to schedule a Report to run automatically which has date parameter? Date parameter should take the current date as a value.

View 12 Replies View Related

Reporting Services :: SSRS - How To Open Linked Report With Parameter In A New Tab

Jun 25, 2015

I am facing an Issue with my SSRS-Reports. I have a stacked column chart in my report and the columns are linked to another report, a sub-report with 6 parameters. Right now after clicking the columns, the sub-report get opened in the same IE-Tab, with relevant parameters and it works out correctly. Challenge is, to open the new report in a new tab / window.

My Current situation: A Chart report, with Action “go to report” on series properties with 6 parametersChallenge: open linked sub-report in a new tab.Info 1: new path of sub-report looks like this:

http://<my_report_server>?ItemPath=<subreportName>&ExecId=qwercc45xgfvll45e4ebgjna&PingId=314x1cy4etmnky45abszeb99

Already tried with no success: I know, action “go to URL” using Expression:

="javascript:void(window.open('http://……','_blank'))"

Info 2: the parameters are like these: CompanyName; Date_From; Date_To; Title; Division; ProfitCenter.

I don’t know If I should try to create this ExecId and PingId; If there is any way to pass the through the parameters or there is another way.

View 3 Replies View Related

SQL Server Reporting Services - Report Datetime Parameter Validation

Jan 23, 2007

Hi,

How can we validate the
input values from user for a datetime
type report parameter?
i.e. Validating whether
the date is correct and in required
format.

Thanks in
Advance.
Ramesh
KS

View 1 Replies View Related

Passing Parameter To Another Report Using Jump To URL Option In Reporting Services 2005

Sep 10, 2007

Hi,

I tried to pass parameter from one report to another report. I can send the parameter using following option:
I used jump to url option and write the following expression:


="javascript:void(window.open('http://hpsi-dev/Reports/Pages/Report.aspx?ItemPath=%2fNextGen+Reports%2fMAUA%2fSales+Order+Detail&rs:Command=Render&SalesOrderNumber="+Fields!SalesOrderNumber.Value+"'))"

and it shows me the following in browser url

http://hpsi-dev/Reports/Pages/Report.aspx?ItemPath=/NextGen+Reports/MAUA/Sales+Order+Detail&rs:Command=Render&SalesOrderNumber=SO43667

now the problem is how to get this ordernumber in my report any option ???pls urgent...any javascript function to take this no into my another report

View 37 Replies View Related

Reporting Services :: Multiple Chart On A Report Page And Parameter Filter

Jun 1, 2015

Is it possible to have different chart (having their dataset from same shared datasets) like six on one report, then secondly can they all respond to same parameter filter.

View 3 Replies View Related

Reporting Services :: Report Parameter Int Type But User Input Through Calendar

Sep 11, 2015

I'm using Cube.My DimDate tables Datekey is integer .But client wants a calendar to set date as you see in picture .how can I change calendar value  which will be input by user.

View 3 Replies View Related

Reporting Services :: Available Parameter Values And Setting Defaults On Report Server

Jun 3, 2015

I have a report with a subscription enabled and the default values that are selected for the report frequently change.  I have our report server locked down so that the users can't change the defaults, but I now want to empower them to maintain this on their own.  Here is my dilemma.  When you have the available parameters set up to pull from a query, the defaults on the report server have to be keyed in manually, which is not an option.  The only way to get a check box there, is to explicitly specify the available values.I need my available values to be database driven and I need to be able to select my defaults on the report server using check boxes.

View 5 Replies View Related

Reporting Services :: Report Builder - How To Use Multiple-value Parameter In Dataset Control

Oct 25, 2015

I have used my parameter value in where clause of my dataset control SQL query. When I choose a single value in my multiple-value parameter then I get output as expected. Hovewer when I choose multuple values I get an arror:

Only one expression can be specified in the select list when the subquery is not introduced with EXISTS.
----------------------------
Query execution failed for dataset 'DATABASE'. (rsErrorExecutingCommand)
----------------------------
An error has occurred during report processing. (rsProcessingAborted)

I am convinced that it's a syntax problem. Is there a way I can change syntax of data output from query:

select @parameter

I need output to be like: value, value, value ... etc.

The dataset control query looks something like the following:

select
ID,
a,
b,
c,
d
from DATASET.dbo.Table
where ID in (select @parameter)

I have been searching through google for weeks to solve this and got this far and got stuck. Is it possible at all to achieve what I am looking for?

View 4 Replies View Related

Reporting Services :: How To Change Position Of Parameter Control In SSRS Report

Jun 24, 2015

I want to Change parameter position in SSRS report.I need Start Date and End Date Parameter at same column so client can easily select Start Date and End Date.I have tried a lot but not succeed.

How Can I change the position of Start Date and End Date.I can't change order of other three parameter Select Institutions, Select Author and Course Pack Names parameter because they are internally related to each other(forward dependencies are there).

View 2 Replies View Related

Reporting Services :: Don't Include Last Page Of SSRS Report Based On Parameter

Mar 9, 2015

I created the report, which has 4 pages. Each page contains bunch of tables and charts, which display data in scope of dataset, created for each page and reflecting certain subject. Each page also has Header and Footer.

My users requested, the report has possibility to include or not include data on Page #4.

Other words, report should display 3 or 4 pages based on the entered parameter.

1. I created parameter named  “Include #### metrics”, which contains options: Y, N
2. For each object on the page 4 I added dependency on the selected parameter in  the visibility option.

Now if user select parameter Not include Page #4, report displays 3 pages as expected and page #4 is empty, but with Header and Footer.

The problem: Their preference is to not to show page 4 at all if someone chooses to not to include #### metrics.

My question is how to force the report to display just 3 selected pages.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved