I have a stored procedure that on two fields it allows null. On the report, I have two DropDownList boxes that are populated with data, however, I would like the user to be able to have the option of not selecting an item from these list, thus passing null to the stored procedure.
When I goto "Report | Report Parameters" I have set these fields to "allow null" and "allow blank" and at the bottom I also gave it the default value of null.
When I run the report in preview mode, those two dropdownlist have a <Select a Value> and my assumption is since I want them to pass null, I will just leave them that way. However, when the report is ran, I receive an error saying "Please select a value for the parameter: (my parameter)". So it forces me to select an option at which I don't want to do.
I have an expression based project connection manager in an existing package and updating Packet Size parameter.
After update and clicking on OK, Packet Size value reverts back to 0 (which is old value). This connection manager is used by lot of Dataflow tasks in my package and recreating the connection manager and updating the reference is not a viable option.
I have report where i should create a report which is multivalued parametr report,but here my condition is i want to see only one county name  in my output that is Ex: Asia Specific (CountryName),I dnt want to see the other Country names,So how should we create for this condition .
I have set up a report on reporting services and deployed it on a server. (server A) The data comes from 2 databases - one on Server A and one on server B
I can view the reports when logged into Server A, but if I try to view them from a networked PC I get the following message:
An error has occurred during report processing.
Cannot create a connection to data source 'byvshs01'.
For more information about this error navigate to the report server on the local server machine, or enable remote errors
Byvshs01 is Server B.
However, if I remove the data from server B from the report, I can view it ok. So it seems you can view data from a DB located on the server that hosts the reports, but not if the DB is located elsewhere.
An error has occurred during report processing. (rsProcessingAborted)...The execution failed for the shared data set 'DataSet1'. (rsDataSet ExecutionError )...Cannot create a connection to data source ' Data source for shared dataset'. (rsErrorOpeningConnection)...the above error message I get on the published report, but everything works fine when I do a preview in Visual Studio.How can I see exactely what is wrong?
When i open any reports getting the below error message.An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database.
(rsReportServerDatabaseError)Procedure or function 'CreateSession' expects parameter '@SiteZone', which was not supplied. Â
I'm using SQL Srv '12. Have ADW'12 and ADWDW'12 DBs installed.I created a new SSIS project. Two project level OLEDB con mngers (One for each OLEDB DB).Dragged and dropped a new DFT.Inside the DFT, I'm using Source Assistant to connect to the ADW'12 OLEDB source.
I use SQL Server 2012 and visual studio 2010.I created SSIS Project with task "Execute Package". Control flow view as: Package1 (execute package) -> Package2 (data flow).Data flow in Package2 view as: ADO.NET source -> ADO.NET destination.
When I started Package2, it's work. I havn't errors.But when I started Package 1 I have error "Unable to get managed connection from the Connection Manager runtime". In execution log I see that ADO.NET source produced this error on verification stage. Package failed on verification stage, not on execution stage.Why when I started Package 2 it work, but when I started Package1 (and Package1 started Package2) it failed?
I am getting the following error when trying to EDIT a OLEDB Connection Manager. I am using VS2010. Im not coming up with any answers to this problem. I just reinstalled SQL SERVER CLIENT TOOLS 2012 That includes the SQL DATA TOOLS/VS 2010 But I still receive this error.
Error:Unable to find the requested .Net Framework Data Provider. It may not be installed. (System.Data)
I have two report , first is main report which is matrix and have one parameter User_ids which is multi value selection and my second report is basic chart of user_wise performance.
Now, my main report (matrix ) works fine for Multiple selection of users and i have putted one textbox on main report chart which has action properties set for chart report, when user click on chart button it must goes to chart with user selected in main report. Now , i have used expression for parameter to send it like ..
=join(parameter!user_id!value,",") which pass selected value to chartÂ
And when I am selecting single user it passing that value to chart parameter list but , when it is more than one user it errors with conversion failed when converting the nvarchar value '121,128' to data type int. But my chart also works when passing 121,128 in user parameter in preview of report .
my dataset from sharepoint list. and this dataset value assign to parameter. i want when no any parameter is selected than it should filter like "ALL". when i select alow null value it give me prompt error you  can not select null in multivalue parameter.How can i do it. i am using share point list.
I am using reporting services 2012, Can we make visibility of report parameter dynamic, ie can we make parameter visible or hide on certain condition or its visibility depends on other parameters Is this feature  available in any other updated version of ssrs?Â
I have a report parameter called para1 which is a drop-down list and what I want to do is display another report parameter based on the para1 selection.
So for example, para1 contains a, b, c choices. if a user selects b, I would like para2 to display but if the user selects a or c, I don't want the para2 to display.
Using SQL Server 2008R2 and Report Builder 3.0..I have an action set in a text box of a table. My intent is to pass the value of that text box (which is variable) to a sub-report in a popup window. Here's my code: URL....The parameter of the report I'm trying to open is @SONum.I'm guessing my error is involved in the formatting of how the value of the parameter is being passed. I've also seen examples where the report server and report values were parameterized, but I don't know where to define
Parameters!ServerAddress.Value anywhere.Do I need to have something set up a certain way within the report I'm opening? Here's the report Parameter settings on the report I'm trying to open.
I am trying to dynamically change my initial catalog in a SSIS project. Each day I get a snapshot of data from the production server. I am performing ETL on that database and loading it into my warehouse. I am trying to put something together so that each day I get the latest snapshot and if its newer then my most recent one I pass that new catalog into the connection manager. I can already run the sql script to compare the two catalogs but I can't populate the connection manager.
I'll go to a dataset, open up the query designer, add a new parameter, then refresh the fields, but the parameter won't be added as a report parameter. If I go to the dataset properties under the list of parameters, the value in the dropdown will be blank. However, sometimes this will automatically add.Â
Is this a bug in Visual Studio? How do I get around this?Â
I've installed with success Visual Studio 2005 team edition for software developers and SQL SQL Server standard edition, but when I've created a new IS project and click on "No Data flow tasks have beed added to this package. click here to add a new DataFlow task"
I receive the following message :
Registration information about the Data Flow task could not be retrieved. Confirm that this task is installed properly on the computer.
Could not enumerate the registered tasks. (Microsoft.DataTransformationServices.Design)
Does someone experience this before ? is there any work around ?
All, While trying to access the Reporting Services in Mng studio.I receive the following error Cannot Connect To ServerA Client found response content type of 'text/html; charset=uf-8,but expected 'text/xml' While trying to access the report on reportmanager.I receive an error."The report server is not responding.Verify that the report server is running and can be accessed from this computer" Any suggestion?
I am new to reporting services. I have created a report project in SQL Server BIDS. The datasource is SQL Server. I was able to see the preview of the report and could build and deploy the report. But when I try to run the report, it gives me error. So I tried connecting to Reporting Services through SQL Server Management Studio.
There I am unable to connect to the Reporting Services. I am getting a very long error message. Giving below few lines which made sense to me.
Client found response content type of text/html; charset=utf-8, but expected text/xml.
Parse Error Message : An error occurred loading a configuration file: Access to the path c:Inetpubwwwrootweb.config is denied
I have given full rights to ASPNET, AuthenticatedUsers.
We have created and scheduled some test reports via Idera performance tool but we are unable to delete the reports. These are not custom reports and reports created with Schedule Email option in Idera. Unfortunately, I dera does not have any option to delete these reports and support is asking me if I tried this by deleting from SQL Server Reporting Services.I looked at the Reporting services but can't find any place to delete these reports. This link does not provide any support because I don't have these (Or Report Manager)----> Configuration Manager console, navigate to System Center Configuration Manager / Site Database / Computer Management / Reporting / Reporting Services.
URL....All I have is "Reporting Services Configuration Manager" under "Configuration Tools". How can I delete these reports from SQL Server Reporting services ?. Can I delete them from some tables in Reports databases ?. If so, what are the tables ?. I delete the jobs from SQL Server but the jobs are automatically created the next day emailing the reports again..
i'm a new to vista and also with sql server 2005 reporting services ..
i was able to install all the tools in sql2005 express edition except reporting services ..gives a message IIS required ..even though the IIS is running and able to browse http://localhost ..
can any one give me an idea , how to install reporting services on vista with IIS7
I have written Custom delivery extension, I am trying to debug this by attching the process ReportingServicesService.exe , I am getting error "Unable to Attach to the Process.Access is denied". I am Admin on my sytem, ASP.net is also part of admin and debuggers group. I am using Visual studio 2005, reporting services 2005, ReportingServicesService.exe is also under my login
I am having SQL query which has inner join table from another Database. The below highlighted query shows its values.
/*Trend and Capacity Report*/ SELECT MEA.DisplayName AS Cloud, MEB.DisplayName AS VM, OS.PropertyValue AS OS, CONVERT(varchar(17),PD.DateTime,113) AS Date, VM3.VirtualCPUCount AS VCPU FROM Perf.vPerfDaily AS PD INNER JOIN vPerformanceRuleInstance AS PRI ON PD.PerformanceRuleInstanceRowId = PRI.PerformanceRuleInstanceRowId INNER JOIN vPerformanceRule AS PR ON PRI.RuleRowId = PR.RuleRowIdÂ
[code]....
My request is to calculate total capacity of all available Virtual CPUs, Memory and Storage from 4 separate clouds: Â 'cloud1','cloud2','cloud3','cloud4'
Whenever I select =Sum(Fields!VCPU.Value) expression in Report Properties and assign it to a variable and assign that variable to a Text Box field I get the value as VCPU * (Number of VMs) which is not correct.
I am looking to get the value of VCPU from all 4 clouds above.
We have a request to build a report based on user input from an excel spreadsheet. We have a SSIS package that imports the data from Excel. This is run by a sql server agent job. Our stored procedure executes this job and runs this whole process just fine but when we execute the stored procedure from reporting services we get errors. Has anyone done this type of thing before and do you have any working solutions for how to get this reporting methodology to function?
I have two SQL 2014 Enterprise Edition installed with the SSRS (native) role installed.
Both server are configured separately with their own Report Server database. Now I want to configured a scale out deployment with a shared database.
On Server 1, I created a new Report Server database. On the second server, I change the database and joined the existing database. The problem is that the second server never shows up under Scale-Out deployment (Waiting to Join).
I am new to SQL Server 2005 Reporting Services and I€™m having problems starting the service. I am running a Windows XP SP2 with SQL Server 2005 and reporting services but the service will not start. My SQL Server instance logs on using €˜Windows Authentication€™ using a username sysadm with no password
I have installed IIS and made sure that ASP.net is running.
I have opened up the Report Services Configuration Manager and amended the settings but I€™m unable to get the service started!!!
Theses are my settings
i) Report Server Virtual Directory OK Name: ReportServer1 Website: Default Web Site
ii) Report Manager Virtual Directory Name: Reports1 Website: Default Web Site
iii) Windows Service Identity Service name: ReportServer Service Account: NT AuthorityLocal Service
Iv Web Service Identity (NOT WORKING)
v) Database Setup Servername €“ Nameofmyserver Database name - ReportServer1 Credential Type Server Credentials
When I click on start no error message appears, it just seems to time out.
when I try to open the SSRS in BIDS ( VS 2008), it is displaying the code portion alone. If i click 'View Designer', it prompts me like "....already opened. Do you want to close?" Only XML content of report is displaying. if I click 'Viee Code' then it displays error like "There is no editor available for 'c: eport Sample. rdl'.Make sure the application for the file type (.rdl) is installed."how to correct this issue by installing or by upgrading?
I am trying to configure a reporting server on my laptop at work. This laptop is running Vista and IIS 7. When I install reporting services, the option for "Install the default configuration" is disabled (greyed out) during setup. The install is successful, but then when I try to connect in the Reporting Services Configuration Manager, I get an unhandled exception ("A WMI error has occurred an no additional error information is available."). If I continue, this error continues to crop up as I attempt to configure the Report Server. When I attempt to configure the virtual directory, the configuration manager crashes. Then, when I navigate to the reportserver page, I get a page that states: Server Application Unavailable
The web application you are attempting to access on this web server is currently unavailable. Please hit the "Refresh" button in your web browser to retry your request.
Administrator Note: An error message detailing the cause of this specific request failure can be found in the application event log of the web server. Please review this log entry to discover what caused this error to occur.
Any ideas for a solution or workaround would be greatly appreciated.
I've created a SSIS package with a DataReaderDestination and a SSRS report that points to it.
I referenced these links during development and I have everything working as expected locally. **I changed the config files as stated on both my local machine and our server. My config matches the example exactly.
When I attempt to deploy my report project to the server I get this error message: "An attempt has been made to use a data extension 'SSIS' that is not registered for this report server."
In the report manager data source properties page it reads: "The data processing extension used for this report is not available. It has either been uninstalled, or it is not configured correctly."
In SQL Server Management Studio data source properties page SSIS is not a data source type option.
I've tried restarting both the Reporting Services and Integration Services on the server to no avail.
Any suggests? My problem is I can't get the SSIS to be recognized source on the server.
