Running SSIS Package

Feb 27, 2008



Can a SSIS Package be run as a job or a maintance tool. I need it to run nightly. Also in that same job can sql queries be added as well.

Thank you
Dee

View 27 Replies


ADVERTISEMENT

Job Running SSIS Package Keeps Failing But The SSIS Package By Itself Runs Perfectly Fine

Aug 30, 2006

Hey, I've a few jobs which call SSIS packages. If I run the SSIS package, it runs fine but if I try to run the job which calls this package, it fails. Can someone help me troubleshoot this issue? None of my jobs that call an SSIS package work. All of them fail.

Thank you

Tej

View 7 Replies View Related

Several Different Errors When Creating And Running SSIS Package. Package Runs Successfuly Sometimes.

May 2, 2008

Hi All,



I am in the process of moving from a 32-bit SQL Server 2005 Enterprise (9.0.3054) to a 64-bit SQL Server 2005 Enterprise (9.0.3054 with 4 CPUs and 8GB of memory on Win 2003 SP2) and the process has been very frustrating to say the least. I am having a problem with packages that I created on my 64-bit SQL Server. I am importing a few tables from the 32-SQL Server into the 64-bit SQL Server using the Task --> Import to create the package.



Sometimes when I am creating a package I get the following error in a message box:



SQL Server Import and Export Wizard

The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered. The wizard cannot continue and it will terminate.

Additional information: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (System.Windows.Forms)





Other times when I run a package that has run successfully before I get the following error:



Faulting application dtexecui.exe, version 9.0.3042.0, stamp 45cd726d, faulting module unknown, version 0.0.0.0, stamp 00000000, debug? 0, fault address 0x025d23f0.





Other times I get this error message:



.NET Runtime version 2.0.50727.1433 - Fatal Execution Engine Error (79FFEE24) (80131506)





And still other times



The package appears to hang when running. By this I mean that the Package Execution Progress shows progress up to a point then it just stops. (The package takes about 17 seconds to run normally) CPU usage is at 1% and the package cannot be stopped.





I have deleted and re-created the package several times and I have also re-installed the service pack on the SQL Server (9.0.3054) but that did not help.





Does anyone have any other suggestions to try?





Thanks.



View 4 Replies View Related

Problem When Running A SSIS Master-package-child Package On Non Default Sql-server Instance

Dec 6, 2007

Hi there

We have a SSIS run which runs as follows


The master package has a configuration file, specifying the connect strings
The master package passes these connect-strings to the child packages in a variable
Both master package and child packages have connection managers, setup to use localhost. This is done deliberately to be able to test the packages on individual development pc€™s.
We do not want to change anything inside the packages when deploying to test, and from test to production. All differences will be in the config files (which are pretty fixed, they very seldom change). That way we can be sure that we can deploy to production without any changes at all.

The package is run from the file system, through a job-schedule.

We experience the following when running on a not default sql-server instance (called dkms5253uedw)

Case 1:
The master package starts by executing three sql-scripts (drop foreign key€™s, truncate tables, create foreign key€™s). This works fine.

The master package then executes the first child package. We then in the sysdtslog get:

Error - €ścannot connect to database xxx€?
Info - €śpackage is preparing to get connection string from parent €¦€?

The child package then executes OK, does all it€™s work, and finish. Because there has been an error, the master package then stops with an error.

Case 2:
When we run exactly the same, but with the connection strings in the config file pointing to the default instance (dkms5253), the everything works fine.

Case 3:
When we run exactly the same, again against the dkms5253uedw instance, but now with the exact same databases defined in the default instance, it also works perfect.

Case 4:
When we then stop the sql-server on the default instance, the package faults again, this time with


Error - €śtimeout when connect to database xxx€?
Info - €śpackage is preparing to get connection string from parent €¦€?

And the continues as in the first case

From all this we conclude, that the child package tries to connect to the database before it knows the connection string it gets passed in the variable from the master package. It therefore tries to connect to the default instance, and this only works if the default instance is running and has the same databases defined. As far as we can see, the child package does no work against the default instance (no logging etc.).

We have tried delayed validation in the packages and in the connection managers, but with the same results (error).

So we are desperately hoping that someone can help us solve this problem.


Thanx,
/Nils M - Copenhagen

View 3 Replies View Related

Running Ssis Package With Ssis Run Time Compoenents And Sql Server 2000...

Jan 22, 2007

running ssis package with ssis run time compoenents and sql server 2000...

Is it possible to run ssis packages that point to servers on sql server 2000
without installing sql server 2005 ?

Can we just install runtime for ssis and run the packages ?

Please explian with links if possible

thanks a lot

View 18 Replies View Related

Running SSIS Package From SQL Job

Aug 18, 2006

I'm trying to run a SSIS package (dtsx) from inside an sql job (SQL Server agent). This works fine if the user running (run as) the step is a local admin on the server. If it's not, I get the error message "The package could not be loaded. The step failed". This happens even if the user has all possible serverroles such as "sysadmin" etc in SQL.

So, my question is, is there any way to load an SSIS package without being local admin on the machine? In case it is, what is needed?

regards Andreas

View 3 Replies View Related

JOb Running SSIS Package

Nov 8, 2006

I have an issue when a job is scheduled to run a SSIS package. The package (exporte a table to a text file) runs fine from microsoft visual studio but when i create a job and run it, i get the following error:

[298] SQLServer Error: 15404, Could not obtain information about Windows NT group/user 'VOLCANOAdministrator', error code 0x534. [SQLSTATE 42000] (ConnIsLoginSysAdmin)

View 5 Replies View Related

Running SSIS Package

Dec 8, 2005

My boss want to close access to xp_cmdshell for any logins including sa.

View 1 Replies View Related

Error When Running SSIS Package

Apr 9, 2008

Hi i get a error when i run my SSIS package. Here is the message

Error: 0xC02020A1 at import file, Flat File Source [1]: Data conversion failed. The data conversion for column "su_supplier_code" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
Error: 0xC020902A at import file, Flat File Source [1]: The "output column "su_supplier_code" (61)" failed because truncation occurred, and the truncation row disposition on "output column "su_supplier_code" (61)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.


The funny thing about this is when i run the job a 2nd time it works fine.

Has any one any idea about this error or why the job would work fine the 2nd ?

View 1 Replies View Related

Running SSIS Package Through SQL Agent

Jun 18, 2008

Hello,

I'm new here and hope you will be able to help me.

I have created several SSIS packages with Visual Studio 2005.
They all work fine in debug mode.
I have been able to make them work with a ODBC connection by using a ADO.NET connection.

Then I exported them to the file system in my SQL Server 2005 database and created a task in SQLAgent to run them.

All the packages using the ODBC connection fail with the following error :

Login failed for user XXX
Error : 18456; Severity : 14 , State : 8

This error is a password mismatch.

I tried several database users and checked the passwords multiple times.

It looks like SQL Agent is not able to retrieve the password although it is stocked in both the ODBC connection and the SSIS connection.

Can you help me?

Thanks,

Ares

View 19 Replies View Related

Automatically Running The SSIS Package Once In A Day

Mar 7, 2007

hi frnds,

i have SSIS package, i would like to schedule the SSIS package inorder to run automatically once in a day.

can anyone suggest me the solun. pls its urgent.

thnkx in adavance..

View 3 Replies View Related

Requirements For Getting An SSIS Package Up And Running

Apr 17, 2008

Hey guys I have a simple SSIS package up and running locally i.e i have Visual Studio 2005 and SQL Server 2005 installed.

Now If i wish to deply this SSIS package to a new server what do i require to be installed on the new server.

I.e SQL server 2005 will be there but will i also need Visual Studio 2005 to be installed ?

Also to actually run the package do i only need the .sln file

View 8 Replies View Related

Error When Running SSIS Package As A Job

Jun 12, 2007

I am running into an error when running a package using a scheduled job under SQL Server Agent account. I am getting following error:

Date 6/12/2007 4:19:15 PM
Log Job History (VistaODSFeed)

Step ID 0
Server 006-DEVSQL2005
Job Name VistaODSFeed
Step Name (Job outcome)
Duration 00:00:00
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0

Message
The job failed. Unable to determine if the owner (ACIsnasir) of job VistaODSFeed has server access (reason: Could not obtain information about Windows NT group/user 'ACIsnasir', error code 0x6ba. [SQLSTATE 42000] (Error 15404)).


ACIsnasir is not the account under which SQL Server Agent service runs. However ACIsnasir has sa priveleges. not sure why am I getting ACIsnasir in the error and not the account under which sql server agent runs.



ideas?

View 1 Replies View Related

Error Running Ssis Package

Sep 16, 2007


I run an ssis task with right click in the BIDS.
the task transform data of the tables between sql2005 DB to another sql2005 DB.
this is the error I get:




Code Snippet
An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description:

"Communication link failure".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description:
"TCP Provider: The semaphore timeout period has expired.
".
helpFile=dtsmsg.rll helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC}".
Task failed: CopyTables2







i have a similar task, only diffrent tables that being transfered, same settings. this task run succesfully.
for the task that fails it takes a long time to run (something like half an hour, maybe more) and then it falils. the task that succeeds finish fast (something like 5 minutes). the data in the tables that being transeferred in the good task is much smaller than the data in the tables in the failed task.

Anyone knows the reason to the error.

Thanks.

View 14 Replies View Related

SSIS Package Not Running Under Proxy

Sep 5, 2007



I have a SSIS package that reads from a remote directory on another server that is on the same domain. When I run the package under my domain user, it runs fine, however when I try to start the SQL job which has the package as the first step, the job fails. I created a proxy account with domain user credentials, set it to be active under "SSIS Package Execution" and set the SSIS package to run as the proxy account, but I get the following error message:

"Unable to start execution of step 1 (reason: Could not get proxy data for proxy_id = 2). The step failed."

I'm not sure what to do at this point, so any help would be appreciated.


View 8 Replies View Related

Error Running Ssis Package

Sep 10, 2007



Hello,

I created a ssis package to transfer data between tables of sql2005 DB to another sql2005 database.
when i run it from BIDS with right click -- > execute package i get this error:




Code Snippet
Error: 0xC002F325 at CopyTables1, Transfer SQL Server Objects Task: Execution failed with the following error: "Cannot apply value null to property Login: Value cannot be null..".





anyone can help here.

Thanks.

View 4 Replies View Related

Running An SSIS Package As A Job That Connects To A DB

Aug 4, 2006

I have a package that I want to run as a scheduled job in sql server 2005. The job runs fine in the studio. I am convinced that it is not a password or security issue as I set the protectionlevel to do not save sensitive data and can still run the job in the studio. The User running the job has SA privileges as does the SQL Server Agent. The job reads a flat file, runs it through a script and than inserts the rows into a table. The job runs successfully only if the flat file is empty. The job history says: The return value was unknown. The process exit code was -1073741795. The step failed.


There are no OnError lines in the logging.

Anyone have any Ideas or tricks to try.

View 9 Replies View Related

Running An SSIS Package Remotely

Jul 9, 2007

When I run a newly created SSIS package remotely from my Vista Business PC, it runs an older version of the package, pointing to the wrong location that I initially configured in the flat file connection manager and I get errors, however when I run that same package from the server, it runs just fine.



Does anyone know what I need to do to clean that up?



thanks,



Anatoli

View 7 Replies View Related

Problem While Running SSIS Package As A Job

Mar 15, 2008

I have created an ssis package for importing some table data of one db to other db . Both taget and destination tables are exactly same . I was able to run the package sucussfully from BI Studio , that time the datas were exported currectly .

I created a an sqlserver agetn job with the package as step . I want it to run this once in a week .
When i tried to run this package , I am getting the following error message

Started: 1:20:07 PM
Error: 2008-03-15 13:31:33.91
Code: 0xC0202009
Source: Data Flow Task Destination 6 - ReservationManualStatus [456]
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Invalid character value for cast specification".
End Error
Error: 2008-03-15 13:31:34.19
Code: 0xC020901C
Source: Data Flow Task Destination 6 - ReservationManualStatus [456]
Description: There was an error with input column "LastModified" (480) on input "Destination Input" (469). The column status returned was: "Conversion failed because the data value overflowed the specified type.".
End Error




One thing is , this error message is not consistent all the time ,
I am getting the similar message only but from different tables making problem each time i run .

One thing common is , it alwayse pointing to date type fields.
Plese help me to get out of this problem
Thanks in advance

View 4 Replies View Related

Running SSIS Package Using .Net Code

Aug 2, 2007

I am running this code my question is when it runs ExecuteNonQuery() it doesn't wait for package to complete It just returns "Package succeeded' - The way you can test if you run this code 2 times one after another. ExecuteNonQuery() breaks with error -
SQLServerAgent Error: Request to run job RunSsisPkg (from User DomainUser) refused because the job is already running from a request by User DomainUser.

How can I check before return package is running and wait to complete before return?

using System;

using System.Data;

using System.Data.SqlClient;

namespace SSISRun

{

class Program

{

static void Main(string[] args)

{

SqlConnection jobConnection;

SqlCommand jobCommand;

SqlParameter jobReturnValue;

SqlParameter jobParameter;

int jobResult;

jobConnection = new SqlConnection("Data Source=(local);Initial Catalog=msdb;Integrated Security=SSPI");

jobCommand = new SqlCommand("sp_start_job", jobConnection);

jobCommand.CommandType = CommandType.StoredProcedure;

jobReturnValue = new SqlParameter("@RETURN_VALUE", SqlDbType.Int);

jobReturnValue.Direction = ParameterDirection.ReturnValue;

jobCommand.Parameters.Add(jobReturnValue);

jobParameter = new SqlParameter("@job_name", SqlDbType.VarChar);

jobParameter.Direction = ParameterDirection.Input;

jobCommand.Parameters.Add(jobParameter);

jobParameter.Value = "PackageName";

jobConnection.Open();



jobCommand.ExecuteNonQuery();

jobResult = (Int32)jobCommand.Parameters["@RETURN_VALUE"].Value;

jobConnection.Close();

switch (jobResult)

{

case 0:

Console.WriteLine("Package succeeded.");

break;

default:

Console.WriteLine("Package failed.");

break;

}



}

}

}

View 10 Replies View Related

Error Running Ssis Package

Sep 12, 2007

Hello.

I run a ssis package of transferring data between sql2005 databases.
I get this error:





Code Snippet
Error: 0xC002F325 at CopyTables2, Transfer SQL Server Objects Task: Execution failed with the following error:
"ERROR : errorCode=-1071636471 description=An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description:
"Could not continue scan with NOLOCK due to data movement.".
helpFile=dtsmsg.rll helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC}".
Task failed: CopyTables2


i run the package currently with right click on the package on the BIDS.




what is the reason for this error? how can I check it?

Thanks.

View 6 Replies View Related

Asp.net SSIS IIS Issue When Running Package From Webapplication

Sep 26, 2007

Hi
 I want to run a SSIS package, that reads from a flatfile and writes to a SQL2005 DB table, from a webpage created in VS2005.
Basically I keep running into the same error, no matter what settings I use in IIS or the web.config (impersonation on or off) for the specific webpage.
The package loads, get's some variables passed and executes. No DTS errors are triggered. I added an eventlistener to pick up events of the package itself.Outcome:
"Microsoft.SqlServer.Dts.Runtime.PackageConnection manager "*******"SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Login failed for user ''. The user is not associated with a trusted SQL Server connection.".
"The SSIS package connection manager to SQL2005 is setup to use windows authentication which of course runs fine when ran directly from VS2005 or with dtsexec because it passes my security credentials which have the appropiate rights.
The webpage uses forms authentication and impersonates properly when told to do so in the web.config. (checked)
Somehow no security credentials seem to get passed to or through the ssis package when it's ran.  
I've seen many posts on the subject but can't really find a solution to run an SSIS package from a webpage.
Is there any way of running an ssis package from a webpage hosted on a webserver running IIS (5.1)?
At the moment I'm not limited to any setup. I just want to have it working.
 
Code to load and execute the package:
Try
pkgLocation = _
"*******package.dtsx"
pkg = app.LoadPackage(pkgLocation, Nothing)
pkg.Variables("User::varFileName").Value = ****pkg.Variables("User::CID").Value = **********
pkgResults = pkg.Execute(Nothing, Nothing, EventListener, Nothing, Nothing)Catch ex As DtsException
End Try
The Eventlistener that captures the failure of the logon attempt of the connection manager inside the package:Public Overrides Function OnError(ByVal source As Microsoft.SqlServer.Dts.Runtime.DtsObject, _
ByVal errorCode As Integer, ByVal subComponent As String, ByVal description As String, _ByVal helpFile As String, ByVal helpContext As Integer, _
ByVal idofInterfaceWithError As String) As BooleanDim message As String = source.ToString & subComponent & description
Return False
End Function

View 1 Replies View Related

Running SSRS Report From SSIS Package

Feb 27, 2009

I have an SSIS package. It updates a table in SQL Server 2005 database. There is another SSRS report that presents my final table and I run it and export it into Excel.Is it any way after SQL Query task and Store procedures are being finished in my SSIS package, I add another object to run my SSRS report and export it to Excel format?

View 4 Replies View Related

Low Virtual Memory When Running SSIS Package As SQL Job

Oct 18, 2007

I see following error when I execute a SSIS package as part of a job from within SQL Server


OnInformation,006-CIS-SQL,apdsvcPM2SQL,VistaMain,{F902B487-D543-4F31-AC80-EF088CD0CBA4},{74325B35-DC59-4B51-AE8E-756BCC879633},10/18/2007 6:15:12 AM,10/18/2007 6:15:12 AM,1074036748,0x,The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 4 buffers were considered and 4 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.

SQL Server has 6 GB memory allocated to it. How can I best troubleshoot this issue?

View 6 Replies View Related

SSIS Package With Excel Destination Is Not Running From SQL Job.

Apr 11, 2008

Hello,

I have created a SSIS package which is getting data from SQL Server table to Excel File.

Step 1 : using Oledb to get records.
Step 2 : created Excel Connection and Excel Destination component
Step 3 : Configured the Excel File Path using variables.
Step 4 : Changed the property 64 bit FALSE


When try to run from BIDS it is running fine.
But
It is not running when try to run from SQL JOB.

The following Error i got:


: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. ::: component "Excel Destination" (588) failed validation and returned error code 0xC020801C. ::: One or more component failed validation. ::: There were errors during task validation. ::




Kindly give solution ASAP.


Thanks
Thiru

View 7 Replies View Related

Running SSIS Package From Asp.net Application Failed

Aug 11, 2006

I have an asp.net web application and a web service (both of them are created in VS 2005 - asp.net 2.0). They are located on the same web server. In both web.config files, I have set <authentication mode="Windows"/> and <identity impersonate="true"/>. Also, configured the IIS settings to use Integrated Windows Authentication and unchecked the Anonymous access (for both). The web service is called from the web app, so I have to pass credentials for authentication to the web service. The web service loads and executes a SSIS package. The package and all the other sql objects are located in the sql server 2005 (windows server 2003 - the same server as the web server).

When run the web service from develop environment (vs. 2005), I get whatever I expected. When call it from web application, however, the package failed (no error message).

In the SSIS package, there are three connection managers €“
· A: Microsoft OLE DB Provider for Analysis Services 9.0 Ă connectionType=OleDbConnection
· B: .Net Providers SqlClient Data Provider Ă connection type=SqlConnection
· C: Native OLE DB Microsoft OLE DB Provider for SQL Server Ă connectionType=OLEDB

After ran the web application and check the sql database, I can tell that the package was reached and when through the first two steps (clear some records in table_1 and extract some records from table_2 ) which relate to the connection manager B €“ ADO.Net connection. The remaining steps failed which are related to the connection managers A & C.

From SSIS package log file, found that the user credentials (domain and username) were correctly passed from web service to sql server 2005 at the first two events, but the credentials (or operator) changed from domainABCuser123 to NT AUTHORITYNETWORK SERVICE after packageStart. Then, it complains €¦ either the user, domainABCserverName$, does not have access to the database, or the database does not exist.

I think the credentials are passed ok but some setting related to the Analysis services are not correct - complaining start from there. Any clues?

Please help and thank you all!

View 1 Replies View Related

SSIS Package Run Fine But Not Working When Running In A Job

Mar 15, 2006



I have a 64bit Ent Ed, Created a SSIS package, deployed it, its running when running from sql server but not running as a job

View 1 Replies View Related

Running SSIS Package On SQL Server 2000 ?

Oct 19, 2007

Hello!

I´m currently developing an import/export package in SSIS. I recently realized that this package is supposed to be run on a SQL Server 2000 instance, and I have no clue if this will work...
I´m pretty new to SQL Server, but I now that DTS from 2000 ws replaced by SSIS in 2005,
and the command-line dtsrun replaced by dtexec.

So my question: Will I be able to run a SSIS package on SQL Server 2000, and how would I do that?



Regards,

Daniel

View 3 Replies View Related

Error In Running SSIS Package On 64 Bit System With /SET

Feb 23, 2008

Hi All,

I would appreciate if someone can help me with the following:

I have package that I designed on 32 bit system. It was copied over to 64 bit server's directory (Production).

I am trying to execute that package using DtExec utility. My package has some parameters that I am trying to set on the command prompt using /SET option. Everything runs fine on 32 bit system (that is my dev box) but I get the following on 64 bit system (Production):

Command that I am trying to run is:
dtutil.exe /FILE "e:external_dataSSISXXX.dtsx"
/SET "Package.Variables[User::ASServer].Properties[Value]";"CP_Promotion"

I get the following errors:

Microsoft (R) SQL Server SSIS Package Utilities
Version 9.00.1399.06 for 64-bit
Copyright (C) Microsoft Corp 1984-2004. All rights reserved.

Option "/SET" is not valid.

On 64 bit system, I don't have 32 bit version of DTExec installed. According to Books On Line the syntax to use DTExec on both 32 bit and 64 bit system are the same. Can /SET not be used in 64 bit system.

Thanks in advance for your help.

View 7 Replies View Related

Running SSIS Package (.dtsx) From A ASP.Net Web Service

Sep 17, 2007



Where do I find about running an SSIS package (.dtsx) from a ASP.Net web service, particularly issues to do with permissions

cheers
Rob

View 1 Replies View Related

Running A SSIS Package Remotely On The SQL Server

Feb 7, 2006

We have a package (which uses SQL Server Destination Task) imported in the SQL Server. Is it possible to invoke this SSIS package from a remote App Server through C# .NET.

We would like to execute the SSIS package in the SQL Server itself and pass on the results of execution to the calling C#.NET application via the output variables declared in the SSIS package.

Thanks,
Loonysan

View 3 Replies View Related

Running SSIS Package On SQL Server 2000

Apr 29, 2008

Hi,

I've an SSIS package that needs to run on our legacy database which is SQL server 2000. Is it possible?

View 1 Replies View Related

SSIS Package Hangs Running From SQL Agent Job

Oct 19, 2007

I have a number of packages that I have moved from an old server. Each package was scheduled with a SQL Agent job. On the old server everything ran fine. All of the packages run fine from VS, from DTEXECUI and I have tried one from the command line with DTEXEC and it worked.

When I run from the SQL Agent job, I don't get a failure, the package just hangs. I let one of the agent jobs sit for an hour with no progress. The package typically takes about 15 minutes to complete.

Below is the output from my package log up to the point that it hangs:

#Fields: event,computer,operator,source,sourceid,executionid,starttime,endtime,datacode,databytes,message

OnInformation,SIC0AD12,NT AUTHORITYNETWORK SERVICE,Item Pool,{0E40BC3D-A3E3-406A-B80B-D5989C49A589},{94F0C620-67CA-4DB7-8E68-F562ABC1450C},10/19/2007 4:23:24 PM,10/19/2007 4:23:24 PM,1074016266,0x,Validation phase is beginning.

OnProgress,SIC0AD12,NT AUTHORITYNETWORK SERVICE,Item Pool,{0E40BC3D-A3E3-406A-B80B-D5989C49A589},{94F0C620-67CA-4DB7-8E68-F562ABC1450C},10/19/2007 4:23:24 PM,10/19/2007 4:23:24 PM,0,0x,Validating

OnProgress,SIC0AD12,NT AUTHORITYNETWORK SERVICE,Item Pool,{0E40BC3D-A3E3-406A-B80B-D5989C49A589},{94F0C620-67CA-4DB7-8E68-F562ABC1450C},10/19/2007 4:23:24 PM,10/19/2007 4:23:24 PM,50,0x,Validating


I've been reading all of the posts concerning using a Proxy. I tried to set that up and got the same results.

Any help would be greatly appreciated.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved