finding the database size from the backup file.I have SQL 2012 backup file, is there any way to find the estimated database size from the backup.I tried restoring , i got an error saying " no space need additional xxx bytes " ...does this error gives the exact space needed to restore ?
One more question....one of the backup file size is 7.2 GB, when i try to restore it ....it throws error saying it needs 292GB extra space while only 100 Gb is available. How come 392 Gb sized database becomes 7.2 Gb .bak file ?
How does backup database command works? I don't see size of database backup file increasing while backup is in progress OR is it locked till the backup is finished.
I need to create a new db from a backup file of an allready existing database (vehicledb) on this server.So i created a new database with name "vehicledb2" .But when i try this, the backup says that this file is used...The backup set holds a backup of a database other than the existing 'Vehicles2' database. Restore of database 'Vehicledb' failed.
I have accidentally taken the backup of a database twice into same .bak file. Now the file is twice the size. Will it be fine if I restore this backup? Or will I screw up any data?
I have a log file that is approximately 50 GIG. I backed up just the log and the file size of the .bak is 192 GIG . Why is this? Shouldn't it be closer to the 50 GIG.
Normally I wouldn't let log grow this much. But we are in process of getting new server up and running and don't have backups going yet. They are working on getting that up and running this week.
So I did a log backup to give me back some log space for now but was concerned when I saw the size of the .bak file.
When I view media contents of the backup device it shows one tranaction log back up and size of 192 GIG.
What is up with this. I know in SQL 2000 the log backup files where never this big. they were about the size of the log itself.
I need to write a process to get file size in kb and record count in a file. I was planning on writing a c# console app that takes the file path and name as a param however should i use a CLR?
I cant put a script in the ssis when it's bringing the file down because it has been deemed that we only use ssis for file consumption.
How can I see what is exact size of SQL server backup file while backup is running. The process is running for more than 2 hours, it is chewing up disk space (it already took about 20G), but the size of backup file is still showing as 0.
what will be size of backup file(FULL) for 1TB database. Just wanna make sure backup is done right.I did a full backup of 1TB database and backup file came like 507GB. I am using GUI for backup.But it completed 100% but didn't give me the screen'The backup is completed successfully' .it says executing---0%
We have an application with replicated environment setup on sql server 2012 . Users will have a replica on their machines and they will replicate to the master database. It has 3 subscriptions subscribed to the publications on the master db.
1) We set up a replica(which uses sql server 2012) on a machine with no sql server on it. After the initial synchronization(used replmerge tool) the mdf file has grown to 33gigs and ldf has grown to 41 gigs. I went to sql server management studion . Right click and checked the properties of the local database. over all size is around 84 gb with little empty free space available.
2) We set up a replica(which uses sql server 2012) on a machine with sql server 2008 on it. After the initial synchronization(used replmerge tool) the mdf file has grown to 49 gigs and ldf has grown to 41 gigs. I went to sql server management studio , Right click and checked the properties of the local database. over all size is around 90 gb with 16 gb free space available.
3) We set up a replica(which uses sql server 2012) on a machine with sql server 2012 on it. We have dropped the local database and recreated the local db and did the initial synchronization using replmerge tool. The mdf file has grown to 49 gigs and ldf has grown to 41 gigs. I went to sql server management studio , Right click and checked the properties of the local database. over all size is around 90 gb with 16 gb free space available.
Why it is allocating the space differently? This is effecting our initial replica set up times.
I have installed the sql server management studio express for my express edition of studio 2005 for backup purposes. I need to automate backing up my database. I created a backup script and have successfully got sched tasks to backup each night. the problem is it is not overwriting the previous data. My first backup was 1 gig, the next night the file was 2 gig, the next it was 3 and so on. This is not due to that much data being added to the db. When I go to restore, I have the option to restore any of the 3 backups. I would like my backup to be a single image of the database at the last backup time. How can I do this?
I am using Append to media backup option in 2000 Version. The size of backup is growing. how can I best create the maintenace plan to clear the history or clear the old files in BACKUP (.bak) file but still be able to restore point in time from same physical file. I
I'm having a problem. When I use the SQL query to make a backup of the database, it worked fine. But everytime I use it, the backed-up file's size kept growing in size. Say I have the file, test.bak whose filesize is 450 MB then I run a new backup to overwrite the existing test.bak file, it just end up as 900 MB. If I run it again, it become 1350 MB and so on.
In a recent attempt to keep the size of my transaction log files down I altered the schedule of my SQL Server log backups from running every 15 minutes from 07:00 to 19:00 to run every 15 minutes.My company also uses a Dell AppAssure application to also take backups. The backups are of the entire drives so I don't this will affect the size of my SQL log files but I did notice that AppAssure has a tick box to truncate the SQL logs so it made me wonder that it could affect the size of my log file. The Appassure backups currently run every 15 minutes from 07:00 to 19:00. I'm wondering if I would be able to maintain my log files at a smaller size if I ran this every 15 minutes from 07:00 to 07:00.
I was having interesting discussion on estimation of log file with a fellow collegue who happens to be quite knowledgable as well.
He told me if we identify the most frequently hit tables for a database and then (sum their sizes * 1.5) for OLAP we get rough estimate for disk space to be allocated for log file.
My backups are failing sometimes.My db size is around 400 GB and we are taking backup to the remote server. Free size available on the disk is showing 600 GB but my database full backup run more than 10 hrs and failed. The failure reason is there is not enough space on the disk.
What could be the possible failure reasons? It has more than the the database size on the backup server but why it is showed that msg on the job failures. I noticed same thing occurred couple of times in the past.
Is there any way to find how much the backup file will be generate before we run the backup job?
i.e. If we run the full backup of test1 database now, it will generate ....bak file for that test1 db
currently we are using maintenance plan and with compression (2008R2) and the database has TDE enabled
Hi all, please show me the way how to calculate the size of a database in SQL 2000. Whith this size we have already calculated, how much space need to make a backup file for this database.
What is the recommended size and file growth for a database and log file? We will be storing approx 10000 records a day.Currently we have the following:
CREATE DATABASE Dummy ONÂ PRIMARY ( NAME = Dummy_data, Â Â FILENAME = 'D:....DATADummy.mdf', Â Â SIZE = 250MB, Â Â FILEGROWTH = 25MB ) LOG ON ( NAME = Dummy_log, Â Â FILENAME = 'D:....DATADummy_log.ldf', Â Â SIZE = 50MB, Â Â FILEGROWTH = 5MB ) ; GO
I am trying to resize a database initial log file from 500M to 2M. I€™m using€?
ALTER DATABASE <DBNAME> MODIFY FILE ( NAME = <DBLOGFILENAME, SIZE = 2 ) "
And I'm getting "MODIFY FILE failed. Specified size is less than current size." I tried going into the database properties and setting the log file to 2M, but it doesn€™t keep the changes.
I am working on Sql Server 2012. and I have multiple databases there. Out of those, i want to move one of my databases to other SQL server 2012, For that i was trying to get approximate size of my database on current server. As i don't have the admin rights, so i can't get that. Can i get the approximate size by right clicking on database and by using the size property Under Database category to get the size idea?
I should restore a SQL Server 2005 Database from backup. The backup contains three files, named user.bak0, user.bak1 and user.bak2.
How is the syntax of the restore filelistonly and the restore database ... ?
I usualy write restore filelistonly from disk = 'path and filenam.bak' restore database. zy from disk = 'path and filename.bak' with replace, move..... move....
This works but I cannot use it with a splitted backup file. The files are much too big to put together to one file.
I have a 50gb database, with 3 files at the primary filegroup, each one of those has around 16gb I truncated 2 tables releasing 33gb, so the database should have around 17gb now, but when I check at the properties it says that each file doesn't have any empty space
I have a SQL 2012 enterprise server, and I'm using Commvault as my backups. So commvault can restore a .bak file to my server, but it cannot use sql compression on the file apparently. So what would be a 150GB .bak backup file is now 600GB. I have to manually upload these files to an auditing firm on an sftp server and the transfer times are now huge.
Is there a way to use something in sql to compress this already existing .bak file down?
I'm getting this error while trying to insert records into a SQL Server Compact Edition database. I have pasted my connection string that was used when creating the database as well as for accessing that same database from my Windows application.
Thanks for any help any of you can give!
Data Source=OnTheGo.sdf;Encrypt Database=True;Password=<password>;Max Database Size=4091
I am developing a smart device application with Visual Studio .Net 2005 and SQL Server Compact Edition database. And also using merge replication to synchronize the data from the mobile device to the SQL Server.
My database size is around 350MB. So when I am trying to synchronize this is the error message that I get. " The database file is larger than the configured maximum database size. The setting takes effect on the first concurrent database connection only.[Required Max Database size ( in MB; 0 if unknown)=129].
I tried changing the Max database size in the connection string and my connection string looks as follows and still did not have any luck.
I am looking at the file / filegroup level backup and recovery options within SQL Server and I'm struggling with the following concept.
Books online assures me that it is possible to perform a file restore whilst the database is in the simple recovery model.
So I have set up a database with two separate file groups, a read/write primary and a read only "secondary". Each filegroup has 2 underlying data files.
I have then created a "live" customers tables within the primary filegroup and assigned my existing "archive" customers tables within the secondary filegroup.
If I try to perform a file or filegroup level backup within management studio, those options are greyed out. I can only perform a database backup.
If I switch back to the full recovery model, the options are no longer greyed out.
So my question is this, is file level backup and recovery actually supported in the simple user model, do you have to perform this task outside of management studio, or (as is likely) am I missing something crucial?
I have a Database which when I Right Click and go to Properties size is 52 GB
But the Size of MDF + NDF Files is 25 + 7 = 32 GB. Log file Size is 20 GB. So I am thinking -- Properties Size of DB includes size of Log Files too -- is that correct?
But when I do a Full Backup the .bak File Size is 26 GB -- does the Full Backup Shrink a DB ?
I thot Full Backup only Shrink the Log Files and could not find anywhere in BOL where it says BACKUP shrinks the empty space in Database -- can somebody confirm this?
