I have a database of 900+ tables with around 3000 SPs, and views. Manually I reviewed few tables and found that tables are not referenced with FK and I applied few. There are lots of tables and SPs using them in join statement, Is there any way with which I can get each tables missing references, any DMV or other manual script which tells about this?
View 2 RepliesCreate Table Sample (ID int not null primary key, RefID int , SeqNo int , Name varchar(10) )
insert into Sample
select 1, 1000, 1, 'Mike'
union
select 2, 1000, 2, 'Mikey'
union
select 3, 1000, 3, 'Michel'
union
select 4, 1001, 1, 'Carmel'
union
[code]....
select * from SampleI have here sample data given. What I want to do is, I want to check the RefID which is not having proper order of sequence number. If you see the RefID 1000, 1001 they are having properly sequence order in SeqNo field. But it is not in RefID 1002. RefID 1002 does not have proper order. It is because user has deleted a row which was having seqno 2. So i want to get what are all the RefID's are not having properly sequenced. So that I would be able to know these are all the RefID's are affected by delete statement that was done by user.
CategoryNos
A 1
A 2
A 3
A 5
A 6
A 9
A 10
B 23
B 24
B 25
B 27
B 28
B 29
B 31
Consider the above data...
I need following output... query ..
CategoryMin RangeMax Range
A 1 3
A 5 6
A 9 10
B 23 25
B 27 29
B 31 31
Logic Behind :
if any number is missing in the continues series the return the min and max of number in that range.
Here is an issue that has me stumped for the past few days. I have atable called MerchTran. Among various columns, the relevant columns forthis issue are:FileDate datetime, SourceTable varchar(25)SQL statement:SELECT DISTINCTFileDate, SourceTableFROMMerchTranORDER BYFileDate, SourceTableData looks like this:FileDate DataSource-----------------------------------2005-02-13 00:00:00.000S12005-02-13 00:00:00.000S22005-02-13 00:00:00.000S32005-02-14 00:00:00.000S12005-02-14 00:00:00.000S22005-02-14 00:00:00.000S32005-02-15 00:00:00.000S22005-02-15 00:00:00.000S32005-02-16 00:00:00.000S12005-02-16 00:00:00.000S22005-02-16 00:00:00.000S32005-02-17 00:00:00.000S12005-02-17 00:00:00.000S22005-02-18 00:00:00.000S12005-02-18 00:00:00.000S22005-02-18 00:00:00.000S32005-02-19 00:00:00.000S12005-02-19 00:00:00.000S3We run a daily process that inserts data in to this table everyday forall 3 sources S1, S2, S3Notice how some data is missing indicating the import process for thatparticular source failed.Example: Missing record2005-02-15 00:00:00.000S12005-02-17 00:00:00.000S32005-02-19 00:00:00.000S2Can someone please help me with a SQL Statement that will return me the3 missing records as above.Thanks in advance for all your help!DBA in distress!Vishal
View 4 Replies View RelatedI got the following problem to solve in TSQL. I don't want to use a cursor. But with the set based solution I am stuck.
Here is my problem:
DECLARE @tmp TABLE (CustomerID INT, CustomerLink INT, PRIMARY KEY(CustomerID))
INSERT @tmp
VALUES(100001,0)
,(100002,100001)
,(100003,100001)
,(100004,100003)
,(100005,100006)
[Code] ....
Desired result:
[CustomerID of a group member],[smallest CustomerID per Group]
|(GroupID)|CustomerID|CustomerLink|
|100001 |100001 |100001 |
|100001 |100002 |100001 |
|100001 |100003 |100001 |
|100001 |100004 |100001 |
|100005 |100005 |100005 |
[Code] .....
doesn't work for crossreferences :.(
RESULTSET:
CustomerID CustomerLink
100001 100001
100002 100001
100003 100001
100004 100001
100005 100005
100006 100006 --wrong
[Code] .....
I need to find the missing months in a table for the earliest and latest start dates per ID_No. As an example:
create table #InputTable (ID_No int ,OccurMonth datetime)
insert into #InputTable (ID_No,OccurMonth)
select 10, '2007-11-01' Union all
select 10, '2007-12-01' Union all
select 10, '2008-01-01' Union all
select 20, '2009-01-01' Union all
select 20, '2009-02-01' Union all
select 20, '2009-04-01' Union all
select 30, '2010-05-01' Union all
select 30, '2010-08-01' Union all
select 30, '2010-09-01' Union all
select 40, '2008-03-01'
For the above table, the answer should be:
ID_No OccurMonth
----- ----------
20 2009-02-01
30 2010-06-01
30 2010-07-01
1) don't include an ID column,
2) don't use the start date/end dates in the data or
3) use cursors, which are forbidden in my environment.
Is there any possibility to create a foreign key references more than one tables.
say for example,
Create table sample1(id int primary key)
Create table sample2(id int primary key)
Create table sample3(
id int primary key,
CONSTRAINT fk1 FOREIGN KEY REFERENCES sample1 (ID),CONSTRAINT fk1 FOREIGN KEY REFERENCES sample2 (ID))
this shows no error while creating, but in the data insertion it shows error..
I have table 'stores' that has 3 columns (storeid, article, doc), I have a second table 'allstores' that has 3 columns(storeid(always 'ALL'), article, doc). The stores table's storeid column will have a stores id, then will have multiple articles, and docs. The 'allstores' table will have 'all' in the store for every article and doc combination. This table is like the master lookup table for all possible article and doc combinations. The 'stores' table will have the actual article and doc per storeid.
What I am wanting to pull is all article, doc combinations that exist in the 'allstores' table, but do not exist in the 'stores' table, per storeid. So if the article/doc combination exists in the 'allstores' table and in the 'stores' table for storeid of 50 does not use that combination, but store 51 does, I want the output of storeid 50, and what combination does not exist for that storeid. I will try this example:
'allstores' 'Stores'
storeid doc article storeid doc article
ALL 0010 001 101 0010 001
ALL 0010 002 101 0010 002
ALL 0011 001 102 0011 002
ALL 0011 002
So I want the query to pull the one from 'allstores' that does not exist in 'stores' which in this case would the 3rd record "ALL 0011 001".
I have table A (EmployeeNumber, Grouping, Stages)
and
Table B (Grouping, Stages)
Table A could look like the following where the multiple employees could have multiple types and multiple stages.
EmployeeNumber, Type, Stages
100, 1, Stage1
100, 1, Stage2
100, 2, Stage1
100, 2, Stage2
200, 1, Stage1
200, 2, Stage2
Table B is a list of requirements that each employee must have. So every employee must have a type 1 and 2 and the associated stages listed below.
Type, Stage
1, Stage1
1, Stage2
2, Stage1
2, Stage2
2, Stage3
2, Stage4
So I know that each employee should have 2 Type 1's and 4 Type 2's. I hope that makes sense, I'm trying to change my data because ours is very proprietary.
I need to identify employees who do not have all their stages and list the stages they are missing. The final report should only have employees and the associated missing types and stages.
I do a count by employee to see how many types they have to identify the ones that don't have all the types and stages.
My count would look something like this:
EmployeeNumber Type Total
100, 1, 2
100, 2, 2
200, 1, 1
200 1, 2
So I know that employee 100 should have 2 more Type 2's and employee 200 should have 1 more Type 1 and 2 more Type 2's based on the required list.
The problem I'm having is taking that required list and joining to my list of employees with missing data and pulling from it the types and stages that are missing by employee. I thought I could get a list of the employees that are missing information and right join it to the required list where the missing records would be nulls. But, that doesn't work because some employees do have the required information and so I'm not getting any nulls returned.
Is there any possibility to trace, most used column in every table on the SQL server?
The intention is, a query which suggests some columns to be indexed; Based on the usage of the column by the queries that run on server.
Is there a way to find all the table names that have a foreign key that references FILE_ID_IN([FILE_ID])
Note: The table def below has a foreign key
IF object_id('CODE_MAP_IN', 'U') IS NOT NULL DROP TABLE CODE_MAP_IN
Print 'Creating table CODE_MAP_IN...'
Create table CODE_MAP_IN
(
[CODE_MAP_FR] [varchar] (53),
[CODE_MAP_TO] [varchar] (53),
[FILE_ID] [float] DEFAULT 1000
PRIMARY KEY ([CODE_MAP_FR]),
FOREIGN KEY ([FILE_ID]) REFERENCES FILE_ID_IN([FILE_ID])
) ON [PRIMARY]
GO
Hey.
I'm trying to create some tables in my database but I'm getting some errors... The one which is causing the most trouble is Msg 1767, Level 16, State 0, Line 38
Foreign key 'ten_fk' references invalid table 'Tenant'.
I'm not sure why it's complaining... can anyone help me out here?
Cheers!
-- Mitch Curtis
-- A2create.sql
-- Set the active database to KWEA.
USE KWEA;
-- Drop existing tables (if any).
DROP TABLE Ownership;
DROP TABLE Tenant;
DROP TABLE Staff;
DROP TABLE Property;
DROP TABLE Property_Status_Report;
DROP TABLE Property_Owner;
DROP TABLE Placement_Record;
DROP TABLE Candidate_Tenant;
DROP TABLE Waiting_List;
-- Create new tables.
CREATE TABLE Waiting_List
(
waiting# INT IDENTITY(1,1) PRIMARY KEY NOT NULL,
candidate_name VARCHAR(20) NOT NULL,
anticipated_start_date SMALLDATETIME NULL,
anticipated_end_date SMALLDATETIME NULL,
max_affordable_rent SMALLMONEY NOT NULL
);
CREATE TABLE Candidate_Tenant
(
candidate# INT IDENTITY(1,1) PRIMARY KEY NOT NULL,
waiting# INT NULL,
name VARCHAR(20) NOT NULL,
phone_number INT NOT NULL,
required_property_type VARCHAR(10) NOT NULL,
CONSTRAINT w_fk FOREIGN KEY(waiting#) REFERENCES Waiting_List(waiting#)
);
CREATE TABLE Placement_Record
(
opening# INT IDENTITY(1,1) PRIMARY KEY NOT NULL,
tenant# INT NOT NULL,
start_date SMALLDATETIME NOT NULL,
end_date SMALLDATETIME NOT NULL,
total_bonds SMALLMONEY NOT NULL,
weekly_rent SMALLMONEY NOT NULL,
CONSTRAINT ten_fk FOREIGN KEY(tenant#) REFERENCES Tenant(tenant#)
);
CREATE TABLE Property_Owner
(
owner# INT IDENTITY(1,1) PRIMARY KEY NOT NULL,
name VARCHAR(20) NOT NULL,
phone_number INT NOT NULL
);
CREATE TABLE Property_Status_Report
(
address VARCHAR(30) NOT NULL,
report_date SMALLDATETIME NOT NULL,
weekly_rent SMALLMONEY NOT NULL,
month_rent_start_date SMALLDATETIME NOT NULL,
month_rent_end_date SMALLDATETIME NOT NULL,
maintenance_fee SMALLMONEY NOT NULL,
month_inspection_history VARCHAR(30) NULL,
CONSTRAINT ar_pk PRIMARY KEY(address, report_date),
FOREIGN KEY(address) REFERENCES Property(address)
);
CREATE TABLE Property
(
address VARCHAR(30) PRIMARY KEY NOT NULL,
staff# INT IDENTITY(1,1) NOT NULL,
type VARCHAR NOT NULL,
occupant_limit INT NOT NULL,
comments VARCHAR(30) NULL,
FOREIGN KEY(staff#) REFERENCES Staff(staff#)
);
CREATE TABLE Staff
(
staff# INT IDENTITY(1,1) PRIMARY KEY NOT NULL,
manager# INT NOT NULL,
name VARCHAR(20) NOT NULL,
FOREIGN KEY(manager#) REFERENCES Staff(staff#)
);
CREATE TABLE Tenant
(
tenant# INT IDENTITY(1,1) PRIMARY KEY NOT NULL,
staff# INT NOT NULL,
property_address VARCHAR(30) NOT NULL,
name VARCHAR(20) NOT NULL,
phone_number INT NOT NULL,
street VARCHAR(20) NOT NULL,
city VARCHAR(20) NOT NULL,
postcode INT NOT NULL,
category VARCHAR(10) NOT NULL,
comments VARCHAR(30) NULL,
FOREIGN KEY(staff#) REFERENCES Staff(staff#),
FOREIGN KEY(property_address) REFERENCES Property(address)
);
CREATE TABLE Ownership
(
address VARCHAR(30) NOT NULL,
owner# INT NOT NULL,
CONSTRAINT ao_pk PRIMARY KEY(address, owner#),
FOREIGN KEY(address) REFERENCES Property(address),
FOREIGN KEY(owner#) REFERENCES Property_Owner(owner#)
);
-- Display tables.
SELECT * FROM Waiting_List;
SELECT * FROM Candidate_Tenant;
SELECT * FROM Placement_Record;
SELECT * FROM Property_Owner;
SELECT * FROM Property_Status_Report;
SELECT * FROM Property;
SELECT * FROM Staff;
SELECT * FROM Tenant;
SELECT * FROM Ownership;
Errors:
Msg 3701, Level 11, State 5, Line 8
Cannot drop the table 'Ownership', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Line 9
Cannot drop the table 'Tenant', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Line 10
Cannot drop the table 'Staff', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Line 11
Cannot drop the table 'Property', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Line 12
Cannot drop the table 'Property_Status_Report', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Line 13
Cannot drop the table 'Property_Owner', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Line 14
Cannot drop the table 'Placement_Record', because it does not exist or you do not have permission.
Msg 1767, Level 16, State 0, Line 38
Foreign key 'ten_fk' references invalid table 'Tenant'.
Msg 1750, Level 16, State 0, Line 38
Could not create constraint. See previous errors.
I have created a table but i forget in which database. I know the table name but i dont know the database name..
I have to filter my table from all database ... how can i do and find....
I need to find all tables which has a join (either inside an sp, view, etc) with my given table in a db.
sys.dm_sql_referencing_entities doesn't work here.
Note: i dont want to identify by FK References, for 2 reasons:
1) tables might not met with a join (just FK was defined)
2) sometimes, a join happened between tables, without an FK defined
I have created some dynamic sql to check a temporary table that is created on the fly for any columns that do contain data. If they do the column name is added to a dynamic sql, if not they are excluded. This looks like:
If (select sum(Case when [Sat] is null then 0 else 1 end) from #TABLE) >= 1 begin set @OIL_BULK = @OIL_BULK + '[Sat]' +',' END
However, I am currently running this on over 230 columns and large tables 1.3 mil rows and it is quite slow. How I can dynamically create a sql script that only selects the columns in the table where there is data in a speedier manner. Unfortunately it has to be on the fly because the temporary table is created on the fly.
Can't seem to make this SQL query work!
Given one table, Table1, with columns Key1 (int), Key2 (int), and Type (varchar)...
I would like to get the rows where Type is equal to 'TypeA' and Key2 is Null that do NOT have a corresponding row in the table where Type is equal to 'TypeB' and Key2 is equal to Key1 from another row
So, given the data
**KEY1** **Key2** **Type**
1 NULL TypeA
2 5 TypeA
3 1 TypeB
4 NULL TypeA
5 NULL TypeB
I would like to return only the row where Key1 = 4 because that row meets the criteria of Type='TypeA'/Key2=NULL and does not have a corresponding row with Type='TypeB'/Key1=Key2 from another row.
I have tried this and it doesn't work...
SELECT t1.Key1, t1.Key2, t1.Type
FROM Table1 t1
WHERE t1.Key2 IS NULL
AND t1.Type LIKE 'TypeA'
AND t1.Key1 NOT IN
(SELECT Key1
FROM Table1 t2
WHERE t1.Key1 = t2.Key2
AND t1.Key1 <> t2.Key1
AND t2.Type LIKE 'TypeB')
I have the following Games table:
CREATE TABLE [dbo].[Games](
[ID] [int] IDENTITY(1,1) NOT NULL,
[Lge] [nvarchar](255) NULL,
[GameDate] [date] NULL,
[HomeTeam] [nvarchar](255) NULL,
[Home_Score] [float] NULL,
[AwayTeam] [nvarchar](255) NULL,
[Away_Score] [float] NULL)
with the following data:
INSERT INTO [dbo].[Games2]
([Lge]
,[GameDate]
,[HomeTeam]
,[Home_Score]
,[AwayTeam]
[Code] ....
This gives the standings as:
Team B4 - 1 -
Team C1 - 1 1.5
Team A2 - 5 3
How can I query the data to find the "games behind" at any date?
I created a CTE which finds a subset of records from a table
I then ran a SELECT statement against the same table as
SELECT * FROM TABLE
EXCEPT (SELECT * FROM CTE)
Is it possible to add another EXCEPT statement after the CTE EXCEPT statement to cover a condition not incorporated in the CTE definition?
Need a script to capture current date modify table list(12 AM to 11:59 PM PST) in a database.
View 7 Replies View RelatedI've just found out about the concept that a table should only be references by foreign keys a maximum of 253 times throughout the database. I was hoping someone could give me a better idea of the dangers of disregarding this recommendation.
In our database, we have a Users table, which contains all of the users of a given system. In nearly every other table in our database, we have a field to indicate which user created the record. This is a reference back to the Users table. But as the number of tables has grown, we've surpassed that 253 limit. All I can tell, practically, is that I can no longer delete from the Users table. The query will fail, telling me the query optimizer ran out of memory, and that I should simplify my query.
The Users table is the only table that even comes close to this number of foreign key references. I don't even mind being unable to delete from the table. I'm mostly wondering if there are other problems with my design that will cause issues?
Is there a better way to keep track of who created a record in the database? Is it bad design to reference my Users table in so many places?
Thanks,
Is there any way to enforce table references in stored procedures? For Example, we have stored procedures with a ton of different formats, "dbo.table", "table", "db.dbo.table", etc. Can we make it so that for every stored procedure, the reference must be at least "dbo.table"?
View 1 Replies View RelatedI have a alphanumeric column that looks something like this:
T0001
T0003
T0004
T0005
How would I go about identifying T0002 as the missing value in the sequence?
Hi,
i have a db that gets real time min by min datas everyday but sometimes somehow some of those dates did not written into that db and i wanna know which dates are missing? how can i do it?
thanks
Hello,I need to write a query to find out a set of missing number in a givensequence.Eg : a Column in some table has the following dataCol11234568910Here I need to write a query to find out that number 7 is missing in thegiven sequence.One possible solution is by using any loop. But I am looking out if the samecan be achieved using any query.Thanks in advance.Regards,Mahesh
View 4 Replies View RelatedI have 2 tables say table1 and table2 with the same structure. Each recordis identified by a field 'SerialNo'. Now there should be a total of 500000records in both tables with serialno from 1 to 500000. Either a record is intable1 or table2. I want to find records (or SerialNo's) that are inneither table (if deleted by accident etc). What would be the sql query?I'm using SQL 6.5thx
View 2 Replies View RelatedLooking for script to find out the databases which are not being backed up only during weekend as we have got about 300 databases and some are not being backed up.
I and my company have a backup history script from where can get the history but I am need of script to find out the databases that were not backed up only on Saturday and Sunday's.
I have to identify missing records from the example below.
Category
BatchNo
TransactionNo
CAT1
1
1
CAT1
1
2
CAT1
2
3
CAT1
2
4
CAT1
2
5
CAT1
3
6
CAT1
3
7
CAT1
3
8
CAT1
5
12
CAT1
5
13
CAT1
5
14
CAT1
5
15
CAT1
7
18
CAT2
1
1
CAT2
1
2
CAT2
3
6
CAT2
3
7
CAT2
3
8
CAT2
3
9
CAT2
4
10
CAT2
4
11
CAT2
4
12
CAT2
6
14
I need a script that will identify missing records as below
Category
BatchNo
CAT1
4
CAT1
6
CAT2
2
CAT2
5
I do not need to know that CAT1 8 and CAT2 7 are not there as they potentially have not been inserted yet.
I idealy want a nice clean SQL statement and do not particually want to insert new table's or triggers although views i Can deal with to an extent.
Considerations
up to 50,000 records added per day!!!
Only need script to run once a day and I have insert dates to help me.
Only 12 Categorys
Batch numbers always start at 1 for different categorys
We are trying to find out the difference between tables in CUSTOMER database and CUSTOMER_coded database. The goal is to find out if there are any columns missing in each table of CUSTOMER_coded database.
We need the list of tables in CUSTOMER_coded database that misses some column compare to its peer in CUSTOMER database (list of columns being missing also).
I googled, but I get only all the columns in tables of database.
I need missing columns of all the tables when we compare these 2 databases( CUSTOMER and CUSTOMER_coded databases).
Im wondering if it is possible to write a procedure that check two identical tables for any missing records. The table design is excatly the same, but some records (of the 40,000) have not copied over to the second table.
Any help would be great, cheers.
I have two tables of book information. One that has descriptions of thebook in it, and the isbn, and the other that has the book title,inventory data, prices, the isbn.Because of some techncal constraints I won't get into now, I can'tcombine them both into one table. No problem. Things are going fine aslong as there is a description in the one table to corrispond to theisbn and other data in the other table.However, about half of the products are not yet entered into thedescrition table. I'd like to run a sql query that pulls up all theisbns that don't exist in the other. In other words, I'd like to get aquery that tells me exactly which isbns do not yet have descrition datain them. I know there is some sql that says to search from one filewhere the number does not exist in the other, but it slips my mind. Cansomeone help me on this please?Thank you!Bill*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 2 Replies View RelatedTable 1
Code
Quarter
500002
26
500002
27
500002
28
500002
28.5
500002
29
Table 2
Code
Qtr
500002
26
500002
27
I have these two identical tables with the columns CODE & Qtr being COMPOSITE PRIMARY KEYS
Can anybody help me with how to compare the two tables to find the records not present in Table 2
That is i need this result
Code
Quarter
500002
28
500002
28.5
500002
29
I have come up with this solution
select scrip_cd,Qtr,scrip_cd+Qtr from Table1 where
scrip_cd+Qtr not in (select scrip_cd+qtr as 'con' from Table2)
i need to know if there is some other way of doing the same
Thanks in Advance
Jacx
Hello:
Need some serious help with this one...
Background:
Am working on completing an ORM that can not only handles CRUD actions -- but that can also updates the structure of a table transparently when the class defs change. Reason for this is that I can't get the SQL scripts that would work for updating a software on SqlServer to be portable to other DBMS systems. Doing it by code, rather than SQL batch has a chance of making cross-platform, updateable, software...
Anyway, because it needs to be cross-DBMS capable, the constraints are that the system used must work for the lowest common denominator....ie, a 'recipe' of steps that will work on all DBMS's.
The Problem:
There might be simpler ways to do this with SqlServer (all ears :-) - just in case I can't make it cross platform right now) but, with simplistic DBMS's (SqlLite, etc) there is no way to ALTER table once formed: one has to COPY the Table to a new TMP name, adding a Column in the process, then delete the original, then rename the TMP to the original name.
This appears possible in SqlServer too --...as long as there are no CASCADE operations.
Truncate table doesn't seem to be the solution, nor drop, as they all seem to trigger a Cascade delete in the Foreign Table.
So -- please correct me if I am wrong here -- it appears that the operations would be
along the lines of:
a) Remove the Foreign Key references
b) Copy the table structure, and make a new temp table, adding the column
c) Copy the data over
d) Add the FK relations, that used to be in the first table, to the new table
e) Delete the original
f) Done?
The questions are:
a) How does one alter a table to REMOVE the Foreign Key References part, if it has no 'name'.
b) Anyone know of a good clean way to get, and save these constraints to reapply them to the new table. Hopefully with some cross platform ADO.NET solution? GetSchema etc appears to me to be very dbms dependant?
c) ANY and all tips on things I might run into later that I have not mentioned, are also greatly appreciated.
Thanks!
Sky
I have inherited a system which uses Identity numbers for primary key fields, but also displays them for the user to see. The user has noticed missing numbers in the sequence, sometimes just a few numbers and sometimes as many as 1000 numbers missing.
As far as I can tell the few numbers missing could possibly be explained by users deleting records or the number being generated on a save, but the save then failing. But I can't explain the huge jump of 1000.
I can find no reference to the RESEED in the code...